Method of numerical correction of errors occasioned by delay of records during the monitoring of environmental variables of interest for animal production

As condições de ambiente térmico e aéreo, no interior de instalações para animais, alteram-se durante o dia, devido à influência do ambiente externo. Para que análises estatísticas e geoestatísticas sejam representativas, uma grande quantidade de pontos distribuídos espacialmente na área da instalação deve ser monitorada. Este trabalho propõe que a variação no tempo das variáveis ambientais de interesse para a produção animal, monitoradas no interior de instalações para animais, pode ser modelada com precisão a partir de registros discretos no tempo. O objetivo deste trabalho foi desenvolver um método numérico para corrigir as variações temporais dessas variáveis ambientais, transformando os dados para que tais observações independam do tempo gasto durante a aferição. O método proposto aproximou os valores registrados com retardos de tempo aos esperados no exato momento de interesse, caso os dados fossem medidos simultaneamente neste momento em todos os pontos distribuídos espacialmente. O modelo de correção numérica para variáveis ambientais foi validado para o parâmetro ambiental temperatura do ar, sendo que os valores corrigidos pelo método não diferiram pelo teste Tukey, a 5% de probabilidade dos valores reais registrados por meio de dataloggers.

A Study of the Robustness Against SEUs of Digital Circuits Implemented with FPGA DSPs

In this paper we present an experimental validation of the reliability increase of digital circuits implemented in XilinxTMFPGAs when they are implemented using the DSPs (Digital Signal Processors) that are available in the reconfigurable device. For this purpose, we have used a fault-injection platform developed by our research group, NESSY [1]. The presented experiments demonstrate that the probability of occurrence of a SEU effect is similar both in the circuits implemented with and without using embedded DSPs. However, the former are more efficient in terms of area usage, which leads to a decrease in the probability of a SEU occurrence.

Fluidic flow delay by ionogel passive pumps in microfluidic paper-based analytical devices

[EN] A new concept for fluid flow manipulation in microfluidic paper-based analytical devices (m-PADs) is presented by introducing ionogel materials as passive pumps. m-PADs were fabricated using a new doubleside contact stamping process and ionogels were precisely photopolymerised at the inlet of the m-PADs.The ionogels remain mainly on the surface of the paper and get absorbed in the superficial paper-fibers allowing for the liquid to flow from the ionogel into the paper easily. As a proof of concept the fluid flowand mixing behaviour of two different ionogels mPADs were compared with the non-treated mPADs.It was demonstrated that both ionogels highly affect the fluid flow by delaying the flow due to their different physical and chemical properties and water holding capacities.

Synchronization of Heteroclinic Circuits Through Learning in Chains of Neural Motifs

The synchronization of oscillatory activity in networks of neural networks is usually implemented through coupling the state variables describing neuronal dynamics. In this study we discuss another but complementary mechanism based on a learning process with memory. A driver network motif, acting as a teacher, exhibits winner-less competition (WLC) dynamics, while a driven motif, a learner, tunes its internal couplings according to the oscillations observed in the teacher. We show that under appropriate training the learner motif can dynamically copy the coupling pattern of the teacher and thus synchronize oscillations with the teacher. Then, we demonstrate that the replication of the WLC dynamics occurs for intermediate memory lengths only. In a unidirectional chain of N motifs coupled through teacher-learner paradigm the time interval required for pattern replication grows linearly with the chain size, hence the learning process does not blow up and at the end we observe phase synchronized oscillations along the chain. We also show that in a learning chain closed into a ring the network motifs come to a consensus, i.e. to a state with the same connectivity pattern corresponding to the mean initial pattern averaged over all network motifs.

Synthetic Circuits for Feedback and Detection in Bacteria

Synthetic biology, by co-opting molecular machinery from existing organisms, can be used as a tool for building new genetic systems from scratch, for understanding natural networks through perturbation, or for hybrid circuits that piggy-back on existing cellular infrastructure. Although the toolbox for genetic circuits has greatly expanded in recent years, it is still difficult to separate the circuit function from its specific molecular implementation. In this thesis, we discuss the function-driven design of two synthetic circuit modules, and use mathematical models to understand the fundamental limits of circuit topology versus operating regimes as determined by the specific molecular implementation. First, we describe a protein concentration tracker circuit that sets the concentration of an output protein relative to the concentration of a reference protein. The functionality of this circuit relies on a single negative feedback loop that is implemented via small programmable protein scaffold domains. We build a mass-action model to understand the relevant timescales of the tracking behavior and how the input/output ratios and circuit gain might be tuned with circuit components. Second, we design an event detector circuit with permanent genetic memory that can record order and timing between two chemical events. This circuit was implemented using bacteriophage integrases that recombine specific segments of DNA in response to chemical inputs. We simulate expected population-level outcomes using a stochastic Markov-chain model, and investigate how inferences on past events can be made from differences between single-cell and population-level responses. Additionally, we present some preliminary investigations on spatial patterning using the event detector circuit as well as the design of stationary phase promoters for growth-phase dependent activation. These results advance our understanding of synthetic gene circuits, and contribute towards the use of circuit modules as building blocks for larger and more complex synthetic networks.

Electrical characterization of electronic circuits produced by inkjet printing

Dissertação de Mestrado, Engenharia Electrónica e Telecomunicações, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014

Method for computing state transformations of time-delay systems

This study provides a systematic method for deriving state transformations of a class of time-delay systems with multiple output. The significance of this study is that such state transformations can be used to transform timedelay systems into new coordinates where all the time-delay terms in the system description are associated with the output and input only. Therefore, in the new coordinate system, a Luenberger-type state observer can be readily designed. Subsequently, of the three possible versions of the original state vector, namely, instantaneous, delayed, and a mixed of instantaneous and delayed, a state observer which estimates one of these versions can be obtained. This new finding allows the authors to design state observers for a wider class of time-delay systems. Conditions for the existence of such coordinate changes and an effective algorithm for computing them are provided in this study. A numerical example and simulation results are given to illustrate the simplicity and effectiveness of the proposed method.

Refined Jensen-based inequality approach to stability analysis of time-delay systems

© 2015 The Institution of Engineering and Technology. In this study, the authors derive some new refined Jensen-based inequalities, which encompass both the Jensen inequality and its most recent improvement based on the Wirtinger integral inequality. The potential capability of this approach is demonstrated through applications to stability analysis of time-delay systems. More precisely, by using the newly derived inequalities, they establish new stability criteria for two classes of time-delay systems, namely discrete and distributed constant delays systems and interval time-varying delay systems. The resulting stability conditions are derived in terms of linear matrix inequalities, which can be efficiently solved by various convex optimisation algorithms. Numerical examples are given to show the effectiveness and least conservativeness of the results obtained in this study.

Linear functional observers with guaranteed ε-convergence for discrete time-delay systems with input/output disturbances

The problem of designing linear functional observers for discrete time-delay systems with unknown-but-bounded disturbances in both the plant and the output is considered for the first time in this paper. A novel approach to design a minimum-order observer is proposed to guarantee that the observer error is ϵ-convergent, which means that the estimate converges robustly within an ϵ-bound of the true state. Conditions for the existence of this observer are first derived. Then, by utilising an extended Lyapunov-Krasovskii functional and the free-weighting matrix technique, a sufficient condition for ϵ-convergence of the observer error system is given. This condition is presented in terms of linear matrix inequalities with two parameters needed to be tuned, so that it can be efficiently solved by incorporating a two-dimensional search method into convex optimisation algorithms to obtain the smallest possible value for ϵ. Three numerical examples, including the well-known single-link flexible joint robotic system, are given to illustrate the feasibility and effectiveness of our results.

Stochastic stability of nonlinear discrete-time Markovian jump systems with time-varying delay and partially unknown transition rates

This paper is concerned with stochastic stability of a class of nonlinear discrete-time Markovian jump systems with interval time-varying delay and partially unknown transition probabilities. A new weighted summation inequality is first derived. We then employ the newly derived inequality to establish delay-dependent conditions which guarantee the stochastic stability of the system. These conditions are derived in terms of tractable matrix inequalities which can be computationally solved by various convex optimized algorithms. Numerical examples are provided to illustrate the effectiveness of the obtained results.

A new physarum network based genetic algorithm for bandwidth-delay constrained least-cost multicast routing

Bandwidth-delay constrained least-cost multicast routing is a typical NP-complete problem. Although some swarm-based intelligent algorithms (e.g., genetic algorithm (GA)) are proposed to solve this problem, the shortcomings of local search affect the computational effectiveness. Taking the ability of building a robust network of Physarum network model (PN), a new hybrid algorithm, Physarum network-based genetic algorithm (named as PNGA), is proposed in this paper. In PNGA, an updating strategy based on PN is used for improving the crossover operator of traditional GA, in which the same parts of parent chromosomes are reserved and the new offspring by the Physarum network model is generated. In order to estimate the effectiveness of our proposed optimized strategy, some typical genetic algorithms and the proposed PNGA are compared for solving multicast routing. The experiments show that PNGA has more efficient than original GA. More importantly, the PNGA is more robustness that is very important for solving the multicast routing problem.

Inter-cycle variability of ignition delay in an ethanol fumigated common rail diesel engine

An experimental study has been performed to investigate the ignition delay of a modern heavy-duty common-rail diesel engine run with fumigated ethanol substitutions up to 40% on an energy basis. The ignition delay was determined through the use of statistical modelling in a Bayesian framework this framework allows for the accurate determination of the start of combustion from single consecutive cycles and does not require any differentiation of the in-cylinder pressure signal. At full load the ignition delay has been shown to decrease with increasing ethanol substitutions and evidence of combustion with high ethanol substitutions prior to diesel injection have also been shown experimentally and by modelling. Whereas, at half load increasing ethanol substitutions have increased the ignition delay. A threshold absolute air to fuel ratio (mole basis) of above ~110 for consistent operation has been determined from the inter-cycle variability of the ignition delay, a result that agrees well with previous research of other in-cylinder parameters and further highlights the correlation between the air to fuel ratio and inter-cycle variability. Numerical modelling to investigate the sensitivity of ethanol combustion has also been performed. It has been shown that ethanol combustion is sensitive to the initial air temperature around the feasible operating conditions of the engine. Moreover, a negative temperature coefficient region of approximately 900{1050 K (the approximate temperature at fuel injection) has been shown with for n-heptane and n-heptane/ethanol blends in the numerical modelling. A consequence of this is that the dominate effect influencing the ignition delay under increasing ethanol substitutions may rather be from an increase in chemical reactions and not from in-cylinder temperature. Further investigation revealed that the chemical reactions at low ethanol substitutions are different compared to the high (> 20%) ethanol substitutions.

Towards power consumption-delay tradeoff by workload allocation in cloud-fog computing

Fog computing, characterized by extending cloud computing to the edge of the network, has recently received considerable attention. The fog is not a substitute but a powerful complement to the cloud. It is worthy of studying the interplay and cooperation between the edge (fog) and the core (cloud). To address this issue, we study the tradeoff between power consumption and delay in a cloud-fog computing system. Specifically, we first mathematically formulate the workload allocation problem. After that, we develop an approximate solution to decompose the primal problem into three subproblems of corresponding subsystems, which can be independently solved. Finally, based on extensive simulations and numerical results, we show that by sacrificing modest computation resources to save communication bandwidth and reduce transmission latency, fog computing can significantly improve the performance of cloud computing.

Theoretical study of quantum capacitance and associated delay in armchair-edge graphene nanoribbons

This work presents a comprehensive investigation of the quantum capacitance and the associated effects on the carrier transit delay in armchair-edge graphene nanoribbons (A-GNRs) based on semi-analytical method. We emphasize on the realistic analysis of bandgap with taking edge effects into account by means of modified tight binding (TB) model. The results show that the edge effects have significant influence in defining the bandgap which is a necessary input in the accurate analyses of capacitance. The quantum capacitance is discussed in both nondegenerate (low gate voltage) and degenerate (high gate voltage) regimes. We observe that the classical capacitance limits the total gate (external) capacitance in the degenerate regime, whereas, quantum capacitance limits the external gate capacitance in the nondegenerate regime. The influence of gate capacitances on the gate delay is studied extensively to demonstrate the optimization of switching time. Moreover, the high-field behavior of a GNR is studied in the degenerate and nondegenerate regimes. We find that a smaller intrinsic capacitance appears in the channel due to high velocity carrier, which limits the quantum capacitance and thus limit the gate delay. Such detail analysis of GNRs considering a realistic model would be useful for the optimized design of GNR-based nanoelectronic devices.

Functional observer-based fault detection of time-delay systems via an LMI approach

This paper presents a novel residual generator that uses minimum-order functional observers to trigger actuator and component faults in time-delay systems. We first present a fault detection scheme and derive existence conditions of the residual generator and functional observer. The observer and residual parameters are then systematically determined via solving some coupled generalized Sylvester matrix equations. To deal with the time-delay issue, a stabilizability condition expressed in terms of linear matrix inequality (LMI) is derived to ensure the time-delay observer error system converges to zero with a prescribed convergence rate. Our design approach has the advantage that the designed fault detection scheme has lower order than existing results in the literature. Two numerical examples are given to illustrate the effectiveness of our results.