A role for the transcriptional repressor ICER in the molecular pathogenesis of type 2 diabetes

AbstractType 2 diabetes (T2D) is a metabolic disease which affects more than 200 millions people worldwide. The progression of this affection reaches nowadays epidemic proportions, owing to the constant augmentation in the frequency of overweight, obesity and sedentary. The pathogenesis of T2D is characterized by reduction in the action of insulin on its target tissues - an alteration referred as insulin resistance - and pancreatic β-cell dysfunction. This latter deterioration is defined by impairment in insulin biosynthesis and secretion, and a loss of β-cell mass by apoptosis. Environmental factors related to T2D, such as chronic elevation in glucose and free fatty acids levels, inflammatory cytokines and pro-atherogenic oxidized low- density lipoproteins (LDL), contribute to the loss of pancreatic β-cell function.In this study, we have demonstrated that the transcription factor Inducible Cyclic AMP Early Repressor (ICER) participates to the progression of both β-cell dysfunction and insulin resistance. The expression of this factor is driven by an alternative promoter and ICER protein represents therefore a truncated product of the Cyclic AMP Response Element Modulator (CREM) family which lacks transactivation domain. Consequently, the transcription factor ICER acts as a passive repressor which reduces expression of genes controlled by the cyclic AMP and Cyclic AMP Response Element Binding protein (CREB) pathway.In insulin-secreting cells, the accumulation of reactive oxygen species caused by environmental factors and notably oxidized LDL - a process known as oxidative stress - induces the transcription factor ICER. This transcriptional repressor hampers the secretory capacity of β-cells by silencing key genes of the exocytotic machinery. In addition, the factor ICER reduces the expression of the scaffold protein Islet Brain 1 (IB 1 ), thereby favouring the activation of the c-Jun N-terminal Kinase (JNK) pathway. This triggering alters in turn insulin biosynthesis and survival capacities of pancreatic β-cells.In the adipose tissue of mice and human subjects suffering from obesity, the transcription factor ICER contributes to the alteration in insulin action. The loss in ICER protein in these tissues induces a constant activation of the CREB pathway and the subsequent expression of the Activating Transcription Factor 3 (ATF3). In turn, this repressor reduces the transcript levels of the glucose transporter GLUT4 and the insulin-sensitizer peptide adiponectin, thereby contributing to the diminution in insulin action.In conclusion, these data shed light on the important role of the transcriptional repressor ICER in the pathogenesis of T2D, which contributes to both alteration in β-cell function and aggravation of insulin resistance. Consequently, a better understanding of the molecular mechanisms responsible for the alterations in ICER levels is required and could lead to develop new therapeutic strategies for the treatment of T2D.RésuméLe diabète de type 2 (DT2) est une maladie métabolique qui affecte plus de 200 millions de personnes dans le monde. La progression de cette affection atteint aujourd'hui des proportions épidémiques imputables à l'augmentation rapide dans les fréquences du surpoids, de l'obésité et de la sédentarité. La pathogenèse du DT2 se caractérise par une diminution de l'action de l'insuline sur ses tissus cibles - un processus nommé insulino-résistance - ainsi qu'une dysfonction des cellules β pancréatiques sécrétrices d'insuline. Cette dernière détérioration se définit par une réduction de la capacité de synthèse et de sécrétion de l'insuline et mène finalement à une perte de la masse de cellules β par apoptose. Des facteurs environnementaux fréquemment associés au DT2, tels l'élévation chronique des taux plasmatiques de glucose et d'acides gras libres, les cytokines pro-inflammatoires et les lipoprotéines de faible densité (LDL) oxydées, contribuent à la perte de fonction des cellules β pancréatiques.Dans cette étude, nous avons démontré que le facteur de transcription « Inducible Cyclic AMP Early Repressor » (ICER) participe à la progression de la dysfonction des cellules β pancréatiques et au développement de Pinsulino-résistance. Son expression étant gouvernée par un promoteur alternatif, la protéine d'ICER représente un produit tronqué de la famille des «Cyclic AMP Response Element Modulator » (CREM), sans domaine de transactivation. Par conséquent, le facteur ICER agit comme un répresseur passif qui réduit l'expression des gènes contrôlés par la voie de l'AMP cyclique et des « Cyclic AMP Response Element Binding protein » (CREB).Dans les cellules sécrétrices d'insuline, l'accumulation de radicaux d'oxygène libres, soutenue par les facteurs environnementaux et notamment les LDL oxydées - un processus appelé stress oxydatif- induit de manière ininterrompue le facteur de transcription ICER. Ainsi activé, ce répresseur transcriptionnel altère la capacité sécrétoire des cellules β en bloquant l'expression de gènes clés de la machinerie d'exocytose. En outre, le facteur ICER favorise l'activation de la cascade de signalisation « c-Jun N- terminal Kinase » (JNK) en réduisant l'expression de la protéine « Islet Brain 1 » (IB1), altérant ainsi les fonctions de biosynthèse de l'insuline et de survie des cellules β pancréatiques.Dans le tissu adipeux des souris et des sujets humains souffrant d'obésité, le facteur de transcription ICER contribue à l'altération de la réponse à l'insuline. La disparition de la protéine ICER dans ces tissus entraîne une activation persistante de la voie de signalisation des CREB et une induction du facteur de transcription « Activating Transcription Factor 3 » (ATF3). A son tour, le répresseur ATF3 inhibe l'expression du transporteur de glucose GLUT4 et du peptide adipocytaire insulino-sensibilisateur adiponectine, contribuant ainsi à la diminution de l'action de l'insuline en conditions d'obésité.En conclusion, à la lumière de ces résultats, le répresseur transcriptionnel ICER apparaît comme un facteur important dans la pathogenèse du DT2, en participant à la perte de fonction des cellules β pancréatiques et à l'aggravation de l'insulino-résistance. Par conséquent, l'étude des mécanismes moléculaires responsables de l'altération des niveaux du facteur ICER pourrait permettre le développement de nouvelles stratégies de traitement du DT2.Résumé didactiqueL'énergie nécessaire au bon fonctionnement de l'organisme est fournie par l'alimentation, notamment sous forme de sucres (glucides). Ceux-ci sont dégradés en glucose, lequel sera distribué aux différents organes par la circulation sanguine. Après un repas, le niveau de glucose sanguin, nommé glycémie, s'élève et favorise la sécrétion d'une hormone appelée insuline par les cellules β du pancréas. L'insuline permet, à son tour, aux organes, tels le foie, les muscles et le tissu adipeux de capter et d'utiliser le glucose ; la glycémie retrouve ainsi son niveau basai.Le diabète de type 2 (DT2) est une maladie métabolique qui affecte plus de 200 millions de personnes dans le monde. Le développement de cette affection est causée par deux processus pathologiques. D'une part, les quantités d'insuline secrétée par les cellules β pancréatiques, ainsi que la survie de ces cellules sont réduites, un phénomène connu sous le nom de dysfonction des cellules β. D'autre part, la sensibilité des tissus à l'insuline se trouve diminuée. Cette dernière altération, l'insulino-résistance, empêche le transport et l'utilisation du glucose par les tissus et mène à une accumulation de ce sucre dans le sang. Cette stagnation de glucose dans le compartiment sanguin est appelée hyperglycémie et favorise l'apparition des complications secondaires du diabète, telles que les maladies cardiovasculaires, l'insuffisance rénale, la cécité et la perte de sensibilité des extrémités.Dans cette étude, nous avons démontré que le facteur ICER qui contrôle spécifiquement l'expression de certains gènes, contribue non seulement à la dysfonction des cellules β, mais aussi au développement de l'insulino-résistance. En effet, dans les cellules β pancréatiques en conditions diabétiques, l'activation du facteur ICER altère la capacité de synthèse et de sécrétion d'insuline et réduit la survie ces cellules.Dans le tissu adipeux des souris et des sujets humains souffrant d'obésité, le facteur ICER contribue à la perte de sensibilité à l'insuline. La disparition d'ICER altère l'expression de la protéine qui capte le glucose, le transoprteur GLUT4, et l'hormone adipocytaire favorisant la sensibilité à l'insuline, nommée adiponectine. Ainsi, la perte d'ICER participe à la réduction de la captation de glucose par le tissue adipeux et au développement de l'insulino-résistance au cours de l'obésité.En conclusion, à la lumière de ces résultats, le facteur ICER apparaît comme un contributeur important à la progression du DT2, en soutenant la dysfonction des cellules β pancréatiques et l'aggravation de l'insulino-résistance. Par conséquent, l'étude des mécanismes responsables de la dérégulation du facteur ICER pourrait permettre le développement de nouvelles stratégies de traitement du DT2.

A Continuous Span Aluminum Girder Concrete Deck Bridge - Part 2 of 2: Fatigue Tests of Aluminum Girders, Final Report, 1997

In 1957, the Iowa State Highway Commission, with financial assistance from the aluminum industry, constructed a 220-ft (67-m) long, four-span continuous, aluminum girder bridge to carry traffic on Clive Road (86th Street) over Interstate 80 near Des Moines, Iowa. The bridge had four, welded I-shape girders that were fabricated in pairs with welded diaphragms between an exterior and an interior girder. The interior diaphragms between the girder pairs were bolted to girder brackets. A composite, reinforced concrete deck served as the roadway surface. The bridge, which had performed successfully for about 35 years of service, was removed in the fall of 1993 to make way for an interchange at the same location. Prior to the bridge demolition, load tests were conducted to monitor girder and diaphragm bending strains and deflections in the northern end span. Fatigue testing of the aluminum girders that were removed from the end spans were conducted by applying constant-amplitude, cyclic loads. These tests established the fatigue strength of an existing, welded, flange-splice detail and added, welded, flange-cover plates and horizontal web plate attachment details. This part, Part 2, of the final report focuses on the fatigue tests of the aluminum girder sections that were removed from the bridge and on the analysis of the experimental data to establish the fatigue strength of full-size specimens. Seventeen fatigue fractures that were classified as Category E weld details developed in the seven girder test specimens. Linear regression analyses of the fatigue test results established both nominal and experimental stress-range versus load cycle relationships (SN curves) for the fatigue strength of fillet-welded connections. The nominal strength SN curve obtained by this research essentially matched the SN curve for Category E aluminum weldments given in the AASHTO LRFD specifications. All of the Category E fatigue fractures that developed in the girder test specimens satisfied the allowable SN relationship specified by the fatigue provisions of the Aluminum Association. The lower-bound strength line that was set at two standard deviations below the least squares regression line through the fatigue fracture data points related well with the Aluminum Association SN curve. The results from the experimental tests of this research have provided additional information regarding behavioral characteristics of full-size, aluminum members and have confirmed that aluminum has the strength properties needed for highway bridge girders.

Integration of Notch 1 and calcineurin/NFAT signaling pathways in keratinocyte growth and differentiation control.

The Notch and Calcineurin/NFAT pathways have both been implicated in control of keratinocyte differentiation. Induction of the p21(WAF1/Cip1) gene by Notch 1 activation in differentiating keratinocytes is associated with direct targeting of the RBP-Jkappa protein to the p21 promoter. We show here that Notch 1 activation functions also through a second Calcineurin-dependent mechanism acting on the p21 TATA box-proximal region. Increased Calcineurin/NFAT activity by Notch signaling involves downregulation of Calcipressin, an endogenous Calcineurin inhibitor, through a HES-1-dependent mechanism. Besides control of the p21 gene, Calcineurin contributes significantly to the transcriptional response of keratinocytes to Notch 1 activation, both in vitro and in vivo. In fact, deletion of the Calcineurin B1 gene in the skin results in a cyclic alopecia phenotype, associated with altered expression of Notch-responsive genes involved in hair follicle structure and/or adhesion to the surrounding mesenchyme. Thus, an important interconnection exists between Notch 1 and Calcineurin-NFAT pathways in keratinocyte growth/differentiation control.

On the Condition Monitoring of Induction machines

The research of condition monitoring of electric motors has been wide for several decades. The research and development at universities and in industry has provided means for the predictive condition monitoring. Many different devices and systems are developed and are widely used in industry, transportation and in civil engineering. In addition, many methods are developed and reported in scientific arenas in order to improve existing methods for the automatic analysis of faults. The methods, however, are not widely used as a part of condition monitoring systems. The main reasons are, firstly, that many methods are presented in scientific papers but their performance in different conditions is not evaluated, secondly, the methods include parameters that are so case specific that the implementation of a systemusing such methods would be far from straightforward. In this thesis, some of these methods are evaluated theoretically and tested with simulations and with a drive in a laboratory. A new automatic analysis method for the bearing fault detection is introduced. In the first part of this work the generation of the bearing fault originating signal is explained and its influence into the stator current is concerned with qualitative and quantitative estimation. The verification of the feasibility of the stator current measurement as a bearing fault indicatoris experimentally tested with the running 15 kW induction motor. The second part of this work concentrates on the bearing fault analysis using the vibration measurement signal. The performance of the micromachined silicon accelerometer chip in conjunction with the envelope spectrum analysis of the cyclic bearing faultis experimentally tested. Furthermore, different methods for the creation of feature extractors for the bearing fault classification are researched and an automatic fault classifier using multivariate statistical discrimination and fuzzy logic is introduced. It is often important that the on-line condition monitoring system is integrated with the industrial communications infrastructure. Two types of a sensor solutions are tested in the thesis: the first one is a sensor withcalculation capacity for example for the production of the envelope spectra; the other one can collect the measurement data in memory and another device can read the data via field bus. The data communications requirements highly depend onthe type of the sensor solution selected. If the data is already analysed in the sensor the data communications are needed only for the results but in the other case, all measurement data need to be transferred. The complexity of the classification method can be great if the data is analysed at the management level computer, but if the analysis is made in sensor itself, the analyses must be simple due to the restricted calculation and memory capacity.

Effective notch method assessment of misalignment for fatigue loaded welds

 The objective of this thesis work was to assess axial misalignment in fatigue loaded welds using the effective notch method. As a result, the fatigue behaviour of non-load carrying cruciform fillet welded joint under cyclic tensile loading has been studied. Various degrees of axial misalignment have been found in one series of non-load carrying cruciform fillet welded joints used in a laboratory investigation. As a result, it was important to carry out a comprehensive investigation since axial misalignment forms part of thequality of fatigue loaded structure and can reduce the fatigue strength. To extend the study, the correlation between fatigue strength and stress ratio, as well as stress concentration factor, were also studied. Moreover, a closer investigation of place of crack initiation and its dependence on weld sequence and imperfections of test specimen (angular distortion) was studied. For the fatigue class calculations, FEM (finite element method) and the effectivenotch approach are used. The addressed variable is the axial misalignment whichis introduce by modeling the entire joint. Fracture mechanics based calculations are also used and quantitatively compared with effective notch and experimental results.

Statistical variation of weld profiles and their expected influence on fatigue strength

The general objective of this study was to conduct astatistical analysis on the variation of the weld profiles and their influence on the fatigue strength of the joint. Weld quality with respect to its fatigue strength is of importance which is the main concept behind this thesis. The intention of this study was to establish the influence of weld geometric parameters on the weld quality and fatigue strength. The effect of local geometrical variations of non-load carrying cruciform fillet welded joint under tensile loading wasstudied in this thesis work. Linear Elastic Fracture Mechanics was used to calculate fatigue strength of the cruciform fillet welded joints in as-welded condition and under cyclic tensile loading, for a range of weld geometries. With extreme value statistical analysis and LEFM, an attempt was made to relate the variation of the cruciform weld profiles such as weld angle and weld toe radius to respective FAT classes.

Glucagon-like peptide-1 increases beta-cell glucose competence and proliferation by translational induction of insulin-like growth factor-1 receptor expression.

Glucagon-like peptide-1 (GLP-1) protects beta-cells against apoptosis, increases their glucose competence, and induces their proliferation. We previously demonstrated that the anti-apoptotic effect was mediated by an increase in insulin-like growth factor-1 receptor (IGF-1R) expression and signaling, which was dependent on autocrine secretion of insulin-like growth factor 2 (IGF-2). Here, we further investigated how GLP-1 induces IGF-1R expression and whether the IGF-2/IGF-1R autocrine loop is also involved in mediating GLP-1-increase in glucose competence and proliferation. We show that GLP-1 up-regulated IGF-1R expression by a protein kinase A-dependent translational control mechanism, whereas isobutylmethylxanthine, which led to higher intracellular accumulation of cAMP than GLP-1, increased both IGF-1R transcription and translation. We then demonstrated, using MIN6 cells and primary islets, that the glucose competence of these cells was dependent on the level of IGF-1R expression and on IGF-2 secretion. We showed that GLP-1-induced primary beta-cell proliferation was suppressed by Igf-1r gene inactivation and by IGF-2 immunoneutralization or knockdown. Together our data show that regulation of beta-cell number and function by GLP-1 depends on the cAMP/protein kinase A mediated-induction of IGF-1R expression and the increased activity of an IGF-2/IGF-1R autocrine loop.

Qualitative structure-metabolism relationships in the hydrolysis of carbamates.

The aims of this review were 1) to compile a large number of reliable literature data on the metabolic hydrolysis of medicinal carbamates and 2) to extract from such data a qualitative relation between molecular structure and lability to metabolic hydrolysis. The compounds were classified according to the nature of their substituents (R³OCONR&supl;R²), and a metabolic lability score was calculated for each class. A trend emerged, such that the metabolic lability of carbamates decreased (i.e., their metabolic stability increased), in the following series: Aryl-OCO-NHAlkyl >> Alkyl-OCO-NHAlkyl ~ Alkyl-OCO-N(Alkyl)? ? Alkyl-OCO-N(endocyclic) ? Aryl-OCO-N(Alkyl)? ~ Aryl-OCO-N(endocyclic) ? Alkyl-OCO-NHAryl ~ Alkyl-OCO-NHAcyl?>> Alkyl-OCO-NH? > Cyclic carbamates. This trend should prove useful in the design of carbamates as drugs or prodrugs.

Cellular mechanisms underlying the regulation of dendritic development by hepatocyte growth factor.

Acquisition of a mature dendritic morphology is critical for neural information processing. In particular, hepatocyte growth factor (HGF) controls dendritic arborization during brain development. However, the cellular mechanisms underlying the effects of HGF on dendritic growth remain elusive. Here, we show that HGF increases dendritic length and branching of rat cortical neurons through activation of the mitogen-activated protein kinase (MAPK) signaling pathway. Activation of MAPK by HGF leads to the rapid and transient phosphorylation of cAMP response element-binding protein (CREB), a key step necessary for the control of dendritic development by HGF. In addition to CREB phosphorylation, regulation of dendritic growth by HGF requires the interaction between CREB and CREB-regulated transcription coactivator 1 (CRTC1), as expression of a mutated form of CREB unable to bind CRTC1 completely abolished the effects of HGF on dendritic morphology. Treatment of cortical neurons with HGF in combination with brain-derived neurotrophic factor (BDNF), a member of the neurotrophin family that regulates dendritic development via similar mechanisms, showed additive effects on MAPK activation, CREB phosphorylation and dendritic growth. Collectively, these results support the conclusion that regulation of cortical dendritic morphology by HGF is mediated by activation of the MAPK pathway, phosphorylation of CREB and interaction of CREB with CRTC1.

Blood-Borne Circadian Signal Stimulates Daily Oscillations in Actin Dynamics and SRF Activity.

In peripheral tissues circadian gene expression can be driven either by local oscillators or by cyclic systemic cues controlled by the master clock in the brain's suprachiasmatic nucleus. In the latter case, systemic signals can activate immediate early transcription factors (IETFs) and thereby control rhythmic transcription. In order to identify IETFs induced by diurnal blood-borne signals, we developed an unbiased experimental strategy, dubbed Synthetic TAndem Repeat PROMoter (STAR-PROM) screening. This technique relies on the observation that most transcription factor binding sites exist at a relatively high frequency in random DNA sequences. Using STAR-PROM we identified serum response factor (SRF) as an IETF responding to oscillating signaling proteins present in human and rodent sera. Our data suggest that in mouse liver SRF is regulated via dramatic diurnal changes of actin dynamics, leading to the rhythmic translocation of the SRF coactivator Myocardin-related transcription factor-B (MRTF-B) into the nucleus.

An Assessment ofFatigue Strength of Load Carrying Welded Joints with Lack of Penetration

On yleisesti tiedossa, että väsyttävän kuormituksen alaisena olevat hitsatut rakenteet rikkoutuvat juuri hitsausliitoksista. Täyden tunkeuman hitsausliitoksia sisältävien rakenteiden asiantunteva suunnittelu janykyaikaiset valmistusmenetelmät ovat lähes eliminoineet väsymisvauriot hitsatuissa rakenteissa. Väsymislujuuden parantaminen tiukalla täyden tunkeuman vaatimuksella on kuitenkin epätaloudellinen ratkaisu. Täyden tunkeuman hitsausliitoksille asetettavien laatuvaatimuksien on määriteltävä selkeät tarkastusohjeet ja hylkäämisperusteet. Tämän diplomityön tarkoituksena oli tutkia geometristen muuttujien vaikutusta kuormaa kantavien hitsausliitosten väsymislujuuteen. Huomio kiinnitettiin pääasiassa suunnittelumuuttujiin, joilla on vaikutusta väsymisvaurioiden syntymiseen hitsauksen juuren puolella. Nykyiset määräykset ja standardit, jotka perustuvat kokeellisiin tuloksiin; antavat melko yleisiä ohjeita hitsausliitosten väsymismitoituksesta. Tämän vuoksi muodostettiin kokonaan uudet parametriset yhtälöt sallitun nimellisen jännityksen kynnysarvon vaihteluvälin, ¿¿th, laskemiseksi, jotta vältettäisiin hitsausliitosten juuren puoleiset väsymisvauriot. Lisäksi, jokaiselle liitostyypille laskettiin hitsin juuren puolen väsymisluokat (FAT), joita verrattiin olemassa olevilla mitoitusohjeilla saavutettuihin tuloksiin. Täydentäviksi referensseiksi suoritettiin useita kolmiulotteisia (3D) analyysejä. Julkaistuja kokeellisiin tuloksiin perustuvia tietoja käytettiin apuna hitsausliitosten väsymiskäyttäytymisen ymmärtämiseksi ja materiaalivakioiden määrittämiseksi. Kuormaa kantavien vajaatunkeumaisten hitsausliitosten väsymislujuus määritettiin käyttämällä elementtimenetelmää. Suurimman pääjännityksen kriteeriä hyödynnettiin murtumiskäyttäytymisen ennakoimiseksi. Valitulle hitsatulle materiaalille ja koeolosuhteille murtumiskäyttäytymistä mallinnettiin särön kasvunopeudella da/dN ja jännitysintensiteettikertoimen vaihteluvälillä, 'K. Paris:n yhtälön numeerinen integrointi suoritettiin FRANC2D/L tietokoneohjelmalla. Saatujen tulosten perusteella voidaan laskea FAT tutkittavassa tapauksessa. ¿¿th laskettiin alkusärön jännitysintensiteettikertoimen vaihteluvälin ja kynnysjännitysintensiteettikertoimen, 'Kth, perusteella. ¿Kth arvoa pienemmällä vaihteluvälillä särö ei kasva. Analyyseissäoletuksena oli hitsattu jälkikäsittelemätön liitos, jossa oli valmis alkusärö hitsin juuressa. Analyysien tulokset ovat hyödyllisiä suunnittelijoille, jotka tekevät päätöksiä koskien geometrisiä parametreja, joilla on vaikutusta hitsausliitosten väsymislujuuteen.

Anchoring of both PKA and 14-3-3 inhibits the Rho-GEF activity of the AKAP-Lbc signaling complex.

A-kinase anchoring proteins (AKAPs) target the cAMP-regulated protein kinase (PKA) to its physiological substrates. We recently identified a novel anchoring protein, called AKAP-Lbc, which functions as a PKA-targeting protein as well as a guanine nucleotide exchange factor (GEF) for RhoA. We demonstrated that AKAP-Lbc Rho-GEF activity is stimulated by the alpha subunit of the heterotrimeric G protein G12. Here, we identified 14-3-3 as a novel regulatory protein interacting with AKAP-Lbc. Elevation of the cellular concentration of cAMP activates the PKA holoenzyme anchored to AKAP-Lbc, which phosphorylates the anchoring protein on the serine 1565. This phosphorylation event induces the recruitment of 14-3-3, which inhibits the Rho-GEF activity of AKAP-Lbc. AKAP-Lbc mutants that fail to interact with PKA or with 14-3-3 show a higher basal Rho-GEF activity as compared to the wild-type protein. This suggests that, under basal conditions, 14-3-3 maintains AKAP-Lbc in an inactive state. Therefore, while it is known that AKAP-Lbc activity can be stimulated by Galpha12, in this study we demonstrated that it is inhibited by the anchoring of both PKA and 14-3-3.