Modified life cycle inventory of aluminium die casting

Aluminium die casting is a process used to transform molten aluminium material into automotive gearbox housings, wheels and electronic components, among many other uses. It is used because it is a very efficient method of achieving near net shape with the required mechanical properties. Life Cycle Assessment (LCA) is a technique used to determine the environmental impacts of a product or process. The Life Cycle Inventory (LCI) is the initial phase of an LCA and describes which emissions will occur and which raw materials are used during the life of a product or during a process. This study has improved the LCI technique by adding in manufacturing and other costs to the ISO standardised methods. Although this is not new, the novel application and allocation methods have been developed independently. The improved technique has then been applied to Aluminium High Pressure Die Casting. In applying the improved LCI to this process, the cost in monetary terms and environmental emissions have been determined for a particular component manufactured by this process. A model has been developed in association with an industry partner so this technique can be repeatedly applied and used in the prediction of costs and emissions. This has been tested with two different products. Following this, specialised LCA software modelling of the aluminium high pressure die casting process was conducted. The variations in the process have shown that each particular component will have different costs and emissions and it is not possible to generalise the process by modelling only one component. This study has concentrated on one process within die casting but the techniques developed can be used across any variations in the die casting process.

Using input-output data in life cycle inventory analysis

The impacts on the environment from human activities are of increasing concern. The need to consider the reduction in energy consumption is of particular interest, especially in the construction and operation of buildings, which accounts for between 30 and 40% of Australia's national energy consumption. Much past and more recent emphasis has been placed on methods for reducing the energy consumed in the operation of buildings. With the energy embodied in these buildings having been shown to account for an equally large proportion of a building's life cycle energy consumption, there is a need to look at ways of reducing the embodied energy of buildings and related products. Life cycle assessment (LCA) is considered to be the most appropriate tool for assessing the life cycle energy consumption of buildings and their products. The life cycle inventory analysis (LCIA) step of a LCA, where an inventory of material and energy inputs is gathered, may currently suffer from several limitations, mainly concerned with the use of incomplete and unreliable data sources and LCIA methods. These traditional methods of LCIA include process-based and input-output-based LCIA. Process-based LCIA uses process specific data, whilst input-output-based LCIA uses data produced from an analysis of the flow of goods and services between sectors of the Australian economy, also known as input-output data. With the incompleteness and unreliability of these two respective methods in mind, hybrid LCIA methods have been developed to minimise the errors associated with traditional LCIA methods, combining both process and input-output data. Hybrid LCIA methods based on process data have shown to be incomplete. Hybrid LCIA methods based on input-output data involve substituting available process data into the input-output model minimising the errors associated with process-based hybrid LCIA methods. However, until now, this LCIA method had not been tested for its level of completeness and reliability. The aim of this study was to assess the reliability and completeness of hybrid life cycle inventory analysis, as applied to the Australian construction industry. A range of case studies were selected in order to apply the input-output-based hybrid LCIA method and evaluate the subsequent results as obtained from each case study. These case studies included buildings: two commercial office buildings, two residential buildings, a recreational building; and building related products: a solar hot water system, a building integrated photovoltaic system and a washing machine. The range of building types and products selected assisted in testing the input-output-based hybrid LCIA method for its applicability across a wide range of product types. The input-output-based hybrid LCIA method was applied to each of the selected case studies in order to obtain their respective embodied energy results. These results were then evaluated with the use of a number of evaluation methods. These evaluation methods included an analysis of the difference between the process-based and input-output-based hybrid LCIA results as an evaluation of the completeness of the process-based LCIA method. The second method of evaluation used was a comparison between equivalent process and input-output values used in the input-output-based hybrid LCIA method as a measure of reliability. It was found that the results from a typical process-based LCIA and process-based hybrid LCIA have a large gap when compared to input-output-based hybrid LCIA results (up to 80%). This gap has shown that the currently available quantity of process data in Australia is insufficient. The comparison between equivalent process-based and input-output-based LCIA values showed that the input-output data does not provide a reliable representation of the equivalent process values, for material energy intensities, material inputs and whole products. Therefore, the use of input-output data to account for inadequate or missing process data is not reliable. However, as there is currently no other method for filling the gaps in traditional process-based LCIA, and as input-output data is considered to be more complete than process data, and the errors may be somewhat lower, using input-output data to fill the gaps in traditional process-based LCIA appears to be better than not using any data at all. The input-output-based hybrid LCIA method evaluated in this study has shown to be the most sophisticated and complete currently available LCIA method for assessing the environmental impacts associated with buildings and building related products. This finding is significant as the construction and operation of buildings accounts for a large proportion of national energy consumption. The use of the input-output-based hybrid LCIA method for products other than those related to the Australian construction industry may be appropriate, especially if the material inputs of the product being assessed are similar to those typically used in the construction industry. The input-output-based hybrid LCIA method has been used to correct some of the errors and limitations associated with previous LCIA methods, without the introduction of any new errors. Improvements in current input-output models are also needed, particularly to account for the inclusion of capital equipment inputs (i.e. the energy required to manufacture the machinery and other equipment used in the production of building materials, products etc.). Although further improvements in the quantity of currently available process data are also needed, this study has shown that with the current available embodied energy data for LCIA, the input-output-based hybrid LCIA appears to provide the most reliable and complete method for use in assessing the environmental impacts of the Australian construction industry.

Assessing the validity of impact pathways for child labour and well-being in social life cycle assessment

Background, aim and scope: Assuming that the goal of social life cycle assessment (SLCA) is to assess damage and benefits on its ‘area of protection’ (AoP) as accurately as possible, it follows that the impact pathways, describing the cause effect relationship between indicator and the AoP, should have a consistent theoretical foundation so the inventory results can be associated with a predictable damage or benefit to the AoP. This article uses two concrete examples from the work on SLCA to analyse to what extent this is the case in current practice. One considers whether indicators included in SLCA approaches can validly assess impacts on the well-being of the stakeholder, whereas the other example addresses whether the ‘incidence of child labour’ is a valid measure for impacts on the AoPs.

Materials and methods: The theoretical basis for the impact pathway between the relevant indicators and the AoPs is analysed drawing on research from relevant scientific fields.

Results:   The examples show a lack of valid impact pathways in both examples. The first example shows that depending on the definition of ‘well-being’, the assessment of impacts on well-being of the stakeholder cannot be performed exclusively with the type of indicators which are presently used in SLCA approaches. The second example shows that the mere fact that a child is working tells little about how this may damage or benefit the AoPs, implying that the normally used indicator; ‘incidence of child labour’ lacks validity in relation to predicting damage or benefit on the AoPs of SLCA.

Discussion: New indicators are proposed to mitigate the problem of invalid impact pathways. However, several problems arise relating to difficulties in getting data, the usability of the new indicators in management situations, and, in relation to example one, boundary setting issues.

Conclusions: The article shows that it is possible to assess the validity of the impact pathways in SLCA. It thereby point to the possibility of utilising the same framework that underpins the environmental LCA in this regard. It also shows that in relation to both of the specific examples investigated, the validity of the impact pathways may be improved by adopting other indicators, which does, however, come with a considerable ‘price’.

Recommendations and perspectives: It is argued that there is a need for analysing impact pathways of other impact categories often included in SLCA in order to establish indicators that better reflect actual damage or benefit to the AoPs.

Modelling Australian business cycle fluctuations : a real business cycle approach

Provides a theoretical explanation of Australian macroeconomic fluctuations, identifies the major driving forces and measures the relative importance of different factors. The research shows that technology, the terms of trade and other real factors are the major driving forces behind Australian macroeconomic fluctations.

Drive cycle analysis of the performance of hybrid electric vehicles

 

Power-cycle-library-based control strategy for plug-in hybrid electric vehicles

It has been demonstrated that considering the knowledge of drive cycle as a priori in the PHEV control strategy can improve its performance. The concept of power cycle instead of drive cycle is introduced to consider the effect of noise factors in the prediction of future drivetrain power demand. To minimize the effect of noise factors, a practical solution for developing a power-cycle library is introduced. A control strategy is developed using the predicted power cycle which inherently improves the optimal operation of engine and consequently improves the vehicle performance. Since the control strategy is formed exclusively for each PHEV rather than a preset strategy which is designed by OEM, the effect of different environmental and geographic conditions, driver behavior, aging of battery and other components are considered for each PHEV. Simulation results show that the control strategy based on the driver library of power cycle would improve both vehicle performance and battery health.

Time and energy constraints in demanding phases of the annual cycle : an example of time limitation in refuelling migratory swans

The daily metabolizable energy intake of an animal is potentially limited by either the available feeding time or by its capacity to process energy. Animals are generally considered not to be time-limited but rather to be energy-processing-limited. This is concluded from the common observation that an animal's feeding time per day increases with a decrease in food density. We argue that such changes in feeding time are in theory also expected when no constraints are operating. Thus, a study of the constraints on energy intakes of free-living animals should be performed during demanding phases of the year. As an example, we collected data on time and energy budgets of Bewick's swan (Cygnus columbianus bewickii) refuelling during migration on fennel pondweed (Potamogeton pectinatus) tubers in two years differing two-fold in tuber biomass density. As predicted by time limitation, the feeding time (defined as the time with the head submerged) did not change in response to a change in food biomass density, both within and between years (averaging 12.2 h d⁻¹). Contrary to energy-processing limitation, and again in line with time limitation, the daily metabolizable energy intake varied, being greater in the year with high than in the year with low food densities. We conclude that more studies are needed of animals operating under demanding conditions before it can be assessed whether free-living animals are generally energy-processing- or time-limited.

Seasonal winds drive water temperature cycle and migration patterns of Southern Australian giant crab Pseudocarcinus gigas

The giant crab Pseudocarcinus gigas occurs along the continental shelf break of southern Australia. During the summer alongshore winds cause cooler water to upwell onto the shelf, and the crabs move from deeper water onto the shelf where there is more food. The combination of a preferred thermal niche and a depth-stratified food supply defines the favorable foraging environments that enhance the growth of P. gigas. Climate change is expected to cause a southerly shift of the austral subtropical high-pressure belt, and modelers have predicted more upwelling-favorable winds. The associated increase in the circulation of cooler water across the shelf is likely to provide P. gigas with an increased access to benthic food resources and their growth rate may increase in some regions.

Textural fractography of fatigue failures under variable cycle loading

A new concept of counting time at fatigue processes is proposed, aimed to reach fractographic compatibility in cases of different loading sequences. Values of cycle effectivity are summarized to give the new reference time. The improvement is shown in application - textural fractography of three specimens loaded by constant cycle, constant cycle with periodic overloading, and a random block, respectively. In contrast to the conventional crack growth rate, the reference crack growth rate is related to common morphologic features of all fracture surfaces.

Cell cycle sensing of oxidative stress in saccharomyces cerevisiae by oxidation of a specific cysteine residue in the transcription factor Swi6p

Yeast cells begin to bud and enter S phase when growth conditions are favourable during G1 phase. When subjected to some oxidative stresses, cells delay entry at G1 allowing repair of cellular damage. Hence, oxidative stress sensing is coordinated with the regulation of cell cycle. We identified a novel function of the cell-cycle regulator of Saccharomyces cerevisiae, Swi6p, as a redox sensor through its cysteine residue at position 404. When alanine was substituted at this position, the resultant mutant, C404A, was sensitive to several reactive oxygen species and oxidants including linoleic acid hydroperoxide, the superoxide anion and diamide. This mutant lost the ability to arrest in G1 phase upon treatment with lipid hydroperoxide. The Cys404 residue of Swi6p in wild-type cells was oxidised to a sulfenic acid when cells were subjected to linoleic acid hydroperoxide. Mutation of Cys404 to Ala abolished the down-regulation of expression of the G1 cyclin genes CLN1, CLN2, PCL1 and PCL2 that occurred when cells of the wild type were exposed to the lipid hydroperoxide. In conclusion, oxidative stress signaling for cell-cycle regulation occurs through oxidation of the G1/S-speicific transcription factor Swi6p and consequently leads to suppression of the expression of G1-cyclins and delay in cells entering the cell cycle.