Abundance and biomass of phytoplankton in the western part of the Black Sea during the R/V Akademik cruise Ak082001 in August 2001

The dataset is composed of 41 samples from 10 stations. The phytoplankton samples were collected by 5l Niskin bottles attached to the CTD system. The sampling depths were selected according to the CTD profile and the in situ fluorometer readings: surface, temperature, salinity and fluorescence gradients and 1 m above the bottom. At some stations phytoplankton net samples (20 µm mesh-size) were collected to assist species biodiversity examination. The samples (1l sea water) were preserved in 4% buffered to pH 8-8.2 with disodiumtetraborate formaldehyde solution and stored in plastic containers. On board at each station few live samples were qualitatively examined under microscope for preliminary analysis of taxonomic composition and dominant species. The taxon-specific phytoplankton abundance samples were concentrated down to 50 cm**3 by slow decantation after storage for 20 days in a cool and dark place. The species identification was done under light microscope OLIMPUS-BS41 connected to a video-interactive image analysis system at magnification of the ocular 10X and objective - 40X. A Sedgwick-Rafter camera (1ml) was used for counting. 400 specimen were counted for each sample, while rare and large species were checked in the whole sample (Manual of phytoplankton, 2005). Species identification was mainly after Carmelo T. (1997) and Fukuyo, Y. (2000). Total phytoplankton abundance was calculated as sum of taxon-specific abundances. Total phytoplankton biomass was calculated as sum of taxon-specific biomasses. The cell biovolume was determined based on morpho-metric measurement of phytoplankton units and the corresponding geometric shapes as described in detail in (Edier, 1979).

Abundance and biomass of phytoplankton in the western part of the Black Sea during Branimir Ormanov cruise BO092000 in September 2000

The samples were concentrated down to 50 cm**3 by slow decantation after storage for 20 days in a cool and dark place. The species identification was done under light microscope OLIMPUS-BS41 connected to a video-interactive image analysis system at magnification of the ocular 10X and objective - 40X. A Sedgwick-Rafter camera (1ml) was used for counting. 400 specimen were counted for each sample, while rare and large species were checked in the whole sample (Manual of phytoplankton, 2005). Species identification was mainly after Carmelo T. (1997) and Fukuyo, Y. (2000). Taxon-specific phytoplankton abundance and biomass were analysed by Moncheva S., B. Parr, 2005. Manual for Phytoplankton Sampling and Analysis in the Black Sea. The cell biovolume was determined based on morpho-metric measurement of phytoplankton units and the corresponding geometric shapes as described in detail in (Edier, 1979).

Dinoflagellate cyst counts of ODP Site 1081, Benguela Upwelling, Miocene-Pliocene

Using the Late Miocene to Pliocene organic-walled dinoflagellate cyst record of ODP Site 1081 we reconstruct and discuss the early upwelling history over the Walvis Ridge with a special focus on the movement of the Angola-Benguela Front (ABF). We suggest that during the Late Miocene the Angola Current flowed southwards over the Walvis Ridge more frequently than today because the ABF was probably located further south as a result of a weaker meridional temperature gradient. A possible strengthening of the meridional gradient during the latest Miocene to early Pliocene in combination with uplift of south-western Africa intensified the upwelling along the coast and increased the upwelling's filaments over the Walvis Ridge. An intermediate period from 6.2 to 5.5 Ma is shown by the dominance of Habibacysta tectata, cysts of a cool-tolerant dinoflagellate known from the northern Atlantic, indicating changing oceanic conditions contemporaneous with the Messinian Salinity Crisis. From 4.3 Ma on, the upwelling signal got stronger again and waters were well-mixed and nutrient-rich. Our results indicate a northward migration of the ABF as early as 7 Ma and the initial stepwise intensification of the BUS.

Dialect features indexing hipster identity on social media: the case of the city of Malaga

Identity is a recurrent research interest in current sociolinguistics and it is also of primary interest in digital discourse studies. Identity construction is closely related to stance and style (Eckert 2008; Jaffe 2009), which are fundamental concepts for understanding the language use and its social meanings in the case of social media users from Malaga. As the specific social meanings of a set of dialect features constitute a style, this style and the social (and technological) context in which the variants are used determine the meanings that are actually associated with each variant. Hence, every variant has its own indexical field covering any number of potential meanings. The Spanish spoken in Malaga, as Andalusian Spanish in general, was in the past often times considered an incorrect, low prestige variety of Spanish which was strongly associated with the poor, rural, backward South of Spain. This southern Spanish variety is easily recognised because of its innovative phonetic features that diverge from the national standard. In this study several of these phonetic dialect features are looked at, which users from Malaga purposefully employ (in a textualised form) on social media for identity construction. This identity construction is analysed through interactional and ethnographic methods: A perception and an imitation task served as key data and were supplemented by answers to a series of open questions. Further data stems from visual, multimodal elements (e.g. images, photos, videos) posted by users from the city of Malaga. The program TAMS Analyzer was used for data codification and analysis. Results show that certain features that in spoken language are considered rural and old-fashioned, acquire new meaning on social media, namely of urbanity and fashion. Moreover, these features, if used online, are associated with hipsters. That is, the “cool” social media index the “coolness” of the dialect features in question and, thus, the mediatisation makes their indexical fields even more multi-layered and dynamic. Social media users from Malaga performatively employ these stylised dialect features to project a hipster identity and certain related stances.

Industrialization in Indonesia since the 1970s

Introduction: During the period from the latter half of the 1980s until just before the Asian currency crisis in 1997, Indonesia’s economic development had drawn expectations and attention from various quarters, along with Malaysia and Thailand within the same Association of Southeast Asian Nations (ASEAN). In fact, the 1993 report by the World Bank, entitled “East Asian Miracle: Economic Growth and Public Policy,” recognized Indonesia as one of the East Asian economies with the strong economic performance, i.e. sustained economic growth (World Bank [1993]). And it was the manufacturing industry that had been the driving force behind Indonesia’s economic growth during that period. Since the 1997 outbreak of the Asian currency crisis, however, the manufacturing sector in Indonesia has been mired in a situation that rules out the kind of bright prospects it had emanated previously. The Indonesian economy is still in the developing stage, and in accordance with the history of industrial structural changes in other countries, Indonesia’s manufacturing industry can still be expected to serve as the engine of the country’s economic development. But is it really possible in an environment where economic liberalization and globalization are forging ahead? And, what sort of problems have to be dealt with to make it possible? To answer these questions, it is necessary to know the current conditions of Indonesia’s manufacturing sector, and to do that, it becomes important to think back on the history of the country’s industrialization. Thus, this paper is intended to retrace and unlock the track of Indonesia’s industrialization up until the establishment of the manufacturing sector in its present form, with the ultimate goal being to give answers to the above-mentioned questions. Subject to an analysis in this paper is the period from the installment of President Soeharto’s administration onward when industrialization of the modern industrial sector2 moved into high gear. 　　　The composition of this paper is outlined below. Section 1 first shows why it is important to examine import substitution and export orientation, both of which are used as the measures of the analysis in this paper, in tracking the history of the industrialization, and then discuss indicators of import substitution and export orientation as well as statistical data and resources needed to develop those indicators. Section 2 clarifies the status of the manufacturing industry among all industries by looking at the composition ratio of the manufacturing industry in terms of value added, imports and exports. Section 3 to 5 cover three periods between 1971 and 1995 and make an analysis of import substitution, export orientation and changes in the industrial structure for each period. Section 3 analyzes the period from 1971 through 1985, when Indonesia pursued the import substitution policy amid the oil boom. Section 4 covers the period from 1985 through 1990, when the packages of deregulatory measures were announced successively under structural adjustment policies made necessary by the fall in oil prices. Section 5 examines the period from 1990 through 1995, which saw the alternate shifts between the overheating of the economy by sharply rising investment by both domestic and foreign investors in the wake of the liberalization of investment, trade and financial services, and polices to cool down the economy. Section 6, which covers the 1995-1999 period straddling the economic crisis, is designed for an analysis of the changes in production trends before and after the economic crisis as well as the changes in the industrial structure. Section 7, after summing up the history of Indonesia’s industrialization examined in the previous sections, discusses problems found in respective sectors and attempts to present future prospects for the country’s manufacturing industry.

Traditional Building Adaptation to New Requirements: Historic Center of Arequipa, Perú

The traditional buildings in the historic center of the city of Arequipa, Perú, recently declared of human heritage, are of volcanic tuff both in walls and in vaulted roofs on the ground floor. Having been built in the 18th century and up to the beginning of the 20th century, they have suffered many damages from the seismic movements registered in this region. Due to this, many of them have had to be rebuilt. In this presentation, the different changes to adapt the city of Spanish colonial origin to the present tertiary use are analyzed.

Similarities and Differences in Barrel Vaults of Traditional and Stately Houses in the Historic Centre of Arequipa, Perú

The traditional architecture of the centre of the city of Arequipa has been analyzed by comparing floor-plans of houses from the eighteenth and nineteenth centuries in order to explain the reasons behind the arrangement of their constructional elements and the evolution of said elements and floor-plans. The historic centre of Arequipa, a city located in the South of Perú, South America (Latitude 16°23' South, Longitude 71 °31' West), is based on a ground plan from 1540 that was set during the city's Spanish foundation. It was declared Patrimony of the Humanity by UNESCO. The manorial architecture is widely known for its decorated fronts and one-of-a-kind designs, but its differences with respect to the popular architecture are not based exclusively on decorative aspects. Peru's colonial period finished around 1825, but the barrel-vault, construction style continued in Arequipa through 1868, when an earthquake destroyed the city. Thereafter, the vaults were replaced by roofs made of rails, with cinders made out of the lava stone. The stately houses belonged to the founding families who settled around the main square on forty nine blocks that formed a square-grid, street layout. Also belonging to this category are the houses of landlords and traders from post-colonial times.

Aplicaciones de filtrado adaptativo LMS para mejorar la respuesta de acelerómetros

El proyecto, “Aplicaciones de filtrado adaptativo LMS para mejorar la respuesta de acelerómetros”, se realizó con el objetivo de eliminar señales no deseadas de la señal de información procedentes de los acelerómetros para aplicaciones automovilísticas, mediante los algoritmos de los filtros adaptativos LMS. Dicho proyecto, está comprendido en tres áreas para su realización y ejecución, los cuales fueron ejecutados desde el inicio hasta el último día de trabajo. En la primera área de aplicación, diseñamos filtros paso bajo, paso alto, paso banda y paso banda eliminada, en lo que son los filtros de butterworth, filtros Chebyshev, de tipo uno como de tipo dos y filtros elípticos. Con esta primera parte, lo que se quiere es conocer, o en nuestro caso, recordar el entorno de Matlab, en sus distintas ecuaciones prediseñadas que nos ofrece el mencionado entorno, como también nos permite conocer un poco las características de estos filtros. Para posteriormente probar dichos filtros en el DSP. En la segunda etapa, y tras recordar un poco el entorno de Matlab, nos centramos en la elaboración y/o diseño de nuestro filtro adaptativo LMS; experimentado primero con Matlab, para como ya se dijo, entender y comprender el comportamiento del mismo. Cuando ya teníamos claro esta parte, procedimos a “cargar” el código en el DSP, compilarlo y depurarlo, realizando estas últimas acciones gracias al Visual DSP. Resaltaremos que durante esta segunda etapa se empezó a excitar las entradas del sistema, con señales provenientes del Cool Edit Pro, y además para saber cómo se comportaba el filtro adaptativo LMS, se utilizó señales provenientes de un generador de funciones, para obtener de esta manera un desfase entre las dos señales de entrada; aunque también se utilizó el propio Cool Edit Pro para obtener señales desfasadas, pero debido que la fase tres no podíamos usar el mencionado software, realizamos pruebas con el generador de funciones. Finalmente, en la tercera etapa, y tras comprobar el funcionamiento deseado de nuestro filtro adaptativo DSP con señales de entrada simuladas, pasamos a un laboratorio, en donde se utilizó señales provenientes del acelerómetro 4000A, y por supuesto, del generador de funciones; el cual sirvió para la formación de nuestra señal de referencia, que permitirá la eliminación de una de las frecuencias que se emitirá del acelerómetro. Por último, cabe resaltar que pudimos obtener un comportamiento del filtro adaptativo LMS adecuado, y como se esperaba. Realizamos pruebas, con señales de entrada desfasadas, y obtuvimos curiosas respuestas a la salida del sistema, como son que la frecuencia a eliminar, mientras más desfasado estén estas señales, mas se notaba. Solucionando este punto al aumentar el orden del filtro. Finalmente podemos concluir que pese a que los filtros digitales probados en la primera etapa son útiles, para tener una respuesta lo más ideal posible hay que tener en cuenta el orden del filtro, el cual debe ser muy alto para que las frecuencias próximas a la frecuencia de corte, no se atenúen. En cambio, en los filtros adaptativos LMS, si queremos por ejemplo, eliminar una señal de entre tres señales, sólo basta con introducir la frecuencia a eliminar, por una de las entradas del filtro, en concreto la señal de referencia. De esta manera, podemos eliminar una señal de entre estas tres, de manera que las otras dos, no se vean afectadas por el procedimiento. Abstract The project, "LMS adaptive filtering applications to improve the response of accelerometers" was conducted in order to remove unwanted signals from the information signal from the accelerometers for automotive applications using algorithms LMS adaptive filters. The project is comprised of three areas for implementation and execution, which were executed from the beginning until the last day. In the first area of application, we design low pass filters, high pass, band pass and band-stop, as the filters are Butterworth, Chebyshev filters, type one and type two and elliptic filters. In this first part, what we want is to know, or in our case, remember the Matlab environment, art in its various equations offered by the mentioned environment, as well as allows us to understand some of the characteristics of these filters. To further test these filters in the DSP. In the second stage, and recalling some Matlab environment, we focus on the development and design of our LMS adaptive filter; experimented first with Matlab, for as noted above, understand the behavior of the same. When it was clear this part, proceeded to "load" the code in the DSP, compile and debug, making these latest actions by the Visual DSP. Will highlight that during this second stage began to excite the system inputs, with signals from the Cool Edit Pro, and also for how he behaved the LMS adaptive filter was used signals from a function generator, to thereby obtain a gap between the two input signals, but also used Cool Edit Pro himself for phase signals, but due to phase three could not use such software, we test the function generator. Finally, in the third stage, and after checking the desired performance of our DSP adaptive filter with simulated input signals, we went to a laboratory, where we used signals from the accelerometer 4000A, and of course, the function generator, which was used for the formation of our reference signal, enabling the elimination of one of the frequencies to be emitted from the accelerometer. Note that they were able to obtain a behavior of the LMS adaptive filter suitable as expected. We test with outdated input signals, and got curious response to the output of the system, such as the frequency to remove, the more outdated are these signs, but noticeable. Solving this point with increasing the filter order. We can conclude that although proven digital filters in the first stage are useful, to have a perfect answer as possible must be taken into account the order of the filter, which should be very high for frequencies near the frequency cutting, not weakened. In contrast, in the LMS adaptive filters if we for example, remove a signal from among three signals, only enough to eliminate the frequency input on one of the inputs of the filter, namely the reference signal. Thus, we can remove a signal between these three, so that the other two, not affected by the procedure.

La barrera del análisis estructural y la representación gráfica en el desarrollo de los proyectos arquitectónicos: el caso de la Ópera de Sidney

En numerosas ocasiones a lo largo de la historia la imaginación de los creadores ha ido por delante de las posibilidades técnicas de cada momento. Así, muchas de estas nuevas ideas han requerido largos periodos de tiempo para materializarse como realidad construida, hasta que el desarrollo tecnológico e industrial hubo alcanzado un grado de madurez suficiente. En el campo de la arquitectura, estas limitaciones técnicas se han ido acotando paulatinamente hasta desembocar en la situación actual en la que cualquier planteamiento formal puede ser representado gráficamente y analizado desde un punto de vista estructural, superádose de este modo la barrera existente históricamente en el tratamiento de las formas. A lo largo del presente tesis doctoral se analiza cómo la formulación del Método de los Elementos Finitos en la década de los cincuenta y las curvas de Bézier en la década de los sesenta del siglo pasado y la posterior generalización de los ordenadores personales y de los programas informáticos asociados (C.A.D. y F.E.M. principalmente) en los estudios de arquitectura e ingeniería a partir de la década de los noventa, posibilitó el desarrollo de cualquier propuesta arquitectónica, por compleja que ésta fuese, provocando una verdadera revolución a nivel formal en el mundo de la arquitectura, especialmente en el campo de la edificación singular o icónica. Se estudia este proceso a través de ocho edificios; cuatro anteriores y otros tantos posteriores a la desaparición de la barrera anteriormente referida, establecida de forma simbólica en la década de los años ochenta del siglo XX: Frontón de Recoletos en Madrid, Edificio Seagram en Nueva York, Habitat ’67 en Montreal, Ópera de Sídney, museo Guggenheim de Bilbao, ampliación del Victoria & Albert Museum en Londres, tanatorio “Meiso no Mori” en Gifu y nueva sede de la CCTV en Pekín. De entre ellos, la Ópera de Sídney, obra del arquitecto danés Jørn Utzon, condensa gran parte de los aspectos relevantes investigados en relación a la influencia que los métodos de representación y análisis estructural ejercen en la concepción y construcción de las obras de arquitectura. Por este motivo y por considerarse un hito de la arquitectura a nivel global se toma como caso de estudio. La idea general del edificio, que data de 1956, se enmarca en una época inmediatamente anterior a la del desarrollo científico y tecnológico anteriormente referido. Esta ausencia de herramientas de diseño disponibles acordes a la complejidad formal de la propuesta planteada condicionó enormente la marcha del proyecto, dilatándose dramáticamente en el tiempo y disparándose su coste hasta el punto de que el propio arquitecto danés fue separado de las obras antes de su conclusión. Además, la solución estructural finalmente construida de las cubiertas dista mucho de la prevista por Utzon inicialmente. Donde él había imaginado unas finas láminas de hormigón flotando sobre el paisaje se materializó una estructura más pesada, formada por costillas pretensadas de hormigón con unas secciones notablemente mayores. La forma también debió ser modificada de modo ostensible respecto a la propuesta inicial. Si este edificio se pretendiese construir en la actualidad, con toda seguridad el curso de los acontecimientos se desarrollaría por senderos muy diferentes. Ante este supuesto, se plantean las siguientes cuestiones: ¿sería posible realizar un análisis estructural de la cubierta laminar planteada por Utzon inicialmente en el concurso con las herramientas disponibles en la actualidad?; ¿sería dicha propuesta viable estructuralmente?. A lo largo de las siguientes páginas se pretende dar respuesta a estas cuestiones, poniendo de relieve el impacto que los ordenadores personales y los programas informáticos asociados han tenido en la manera de concebir y construir edificios. También se han analizado variantes a la solución laminar planteada en la fase de concurso, a través de las cuales, tratando en la medida de lo posible de ajustarse a las sugerencias que Ove Arup y su equipo realizaron a Jørn Utzon a lo largo del dilatado proceso de proyecto, mejorar el comportamiento general de la estructura del edificio. Por último, se ha pretendido partir de cero y plantear, desde una perspectiva contemporánea, posibles enfoques metodológicos aplicables a la búsqueda de soluciones estructurales compatibles con la forma propuesta originalmente por Utzon para las cubiertas de la Ópera de Sídney y que nunca llegó a ser construida (ni analizada), considerando para ello los medios tecnológicos, científicos e industriales disponibles en la actualidad. Abstract On numerous occasions throughout history the imagination of creators has gone well beyond of the technical possibilities of their time. Many new ideas have required a long period to materialize, until the technological and industrial development had time to catch up. In the architecture field, these technical limitations have gradually tightened leading to the current situation in which any formal approach can be represented and analyzed from a structural point of view, thus concluding that the structural analysis and the graphical representation’s barrier in the development of architectural projects has dissappeared. Throughout the following pages it is examined how the development of the Finite Element Method in the fifties and the Bezier curves in the sixties of the last century and the subsequent spread of personal computers and specialized software in the architectural and engineering offices from the nineties, enabled the development of any architectural proposal independently of its complexity. This has caused a revolution at a formal level in architecture, especially in the field of iconic building. This process is analyzed through eight buildings, four of them before and another four after the disappearance of the above mentioned barrier, roughly established in the eighties of the last century: Fronton Recoletos in Madrid, Seagram Building in New York Habitat '67 in Montreal, Sydney Opera House, Guggenheim Museum Bilbao, Victoria & Albert Museum extension in London, Crematorium “Meiso no Mori” in Gifu and the new CCTV headquarters in Beijing. Among them, the Sydney Opera House, designed by Danish architect Jørn Utzon, condenses many of the main aspects previously investigated regarding the impact of representation methods and structural analysis on the design and construction of architectural projects. For this reason and also because it is considered a global architecture milestone, it is selected as a case study. The building’s general idea, which dates from 1956, is framed at a time immediately preceding the above mentioned scientific and technological development. This lack of available design tools in accordance with the proposal’s formal complexity conditioned enormously the project’s progress, leading to a dramatic delay and multiplying the final budget disproportionately to the point that the Danish architect himself was separated from the works before completion. Furthermore, the built structure differs dramatically from the architect’s initial vision. Where Utzon saw a thin concrete shell floating over the landscape a heavier structure was built, consisting of prestressed concrete ribs with a significantly greater size. The geometry also had to be modified. If this building were to built today, the course of events surely would walk very different paths. Given this assumption, a number of questions could then be formulated: Would it be possible to perform a structural analysis of Utzon’s initially proposed competition-free-ways roof’s geometry with the tools available nowadays?; Would this proposal be structurally feasable?. Throughout the following pages it is intended to clarify this issues, highlighting personal computers and associated software’s impact in building design and construction procedures, especially in the field of iconic building. Variants have also been analyzed for the laminar solution proposed in the competition phase, through which, trying as far as possible to comply with the suggestions that Ove Arup and his team did to Jørn Utzon along the lengthy process project, improving the overall performance of the building structure. Finally, we have started from scratch and analyzed, from a contemporary perspective, possible structural solutions compatible with Utzon’s Opera House’s original geometry and vision –proposal that was never built (nor even analyzed)-, taking into consideration the technological, scientific and industrial means currently available.

Discovery of a low-mass brown dwarf companion of the young nearby star G196-3.

A substellar-mass object in orbit at about 300 astronomical units from the young low-mass star G 196-3 was detected by direct imaging. Optical and infrared photometry and low- and intermediate-resolution spectroscopy of the faint companion, hereafter referred to as G 196-3B, confirm its cool atmosphere ?15 Jupiter masses. The separation and allow its mass to be estimated at 25?10 between the objects and their mass ratio suggest the fragmentation of a collapsing cloud as the most likely origin for G 196-3B, but alternatively it could have originated from a protoplanetary disc that has been dissipated. Whatever the formation process was, the young age of the primary star (about 100 million years) demonstrates that substellar companions can form on short time scales.

Evaluación del potencial fotovoltaico del Campus Sur de la Universidad Politécnica de Madrid

El presente proyecto engloba el estudio del potencial fotovoltaico del Campus Sur de la Universidad Politécnica de Madrid. Este estudio se divide en tres partes. En primer lugar, se calcula la productividad del campus. En segundo lugar, se diseña la disposición de los generadores fotovoltaicos en los terrenos disponibles. Como paso final, se realiza un estudio económico de distintos supuestos. Para realizar los cálculos de productividad, se utiliza IESPRO, un programa desarrollado en Matlab©, junto con una aplicación complementaria desarrollada en el mismo lenguaje. Gracias a estos dos software es posible obtener una estimación muy realista de la energía anual generada. El aprovechamiento del terreno se estudia con la ayuda del software libre Sketchup©. Gracias a esta aplicación, es posible la reconstrucción del Campus Sur en 3D. Dicha reconstrucción incluye edificaciones y vegetación, facilitando la distribución de los generadores fotovoltaicos en todas las zonas, pudiendo evitar zonas con sombreado o no aptas para la instalación, y maximizando la utilización del terreno. El conjunto de los análisis anteriores permiten determinar el rendimiento energético del Campus Sur en sus distintas configuraciones, es decir, únicamente instalando generadores fotovoltaicos en las azoteas de los edificios, o la instalación en todo el terreno disponible, el cual incluye las azoteas y los descampados. Este rendimiento energético, comparado con el consumo anual de todo el campus, permite estimar el coste financiero de llevar a cabo la instalación y su rentabilidad, todo ello detallado en el estudio económico. El estudio económico se basa en dos supuestos, el primero de ellos, únicamente tiene en cuenta la instalación en las azoteas de los edificios. El segundo estudio, incluye los descampados y las azoteas. Con estos dos estudios se puede verificar la viabilidad del proyecto, facilitando datos concretos sobre las ventajas de cada uno de ellos. ABSTRACT. The aim of this work is to study the photovoltaic potential in the South Campus of the Polytechnic University of Madrid. The work has been divided into three parts. The first one is focused on the calculus of the solar harvesting productivity of the South Campus. The second part is centered in the development of the complete photovoltaic system layout design, taking into account the available placement. In the third part, an economic study considering several different scenarios is carried out. In order to calculate the solar productivity, the MATLAB based software tool IESPRO together with a complementary application developed in MATLAB as well, have been used. These programs allow to obtain an accurate estimation of the generated annual energy. The land use is studied with the help of free software SketchUp. With this application, it is possible to rebuild the South Campus in 3D. This reconstruction includes: buildings and vegetation, facilitating the distribution of photovoltaic generators in all areas, to avoid shaded or unsuitable areas for the installation, and maximizing land use. All the above analysis allow determining the energy efficiency of the South Campus for two different configurations, i.e., installing solar photovoltaic arrays only on the roofs of the buildings, or installing solar photovoltaic arrays throughout the land available, including vacant lots and rooftops. The facilities final cost and the cost effectiveness are estimated by comparing the energy efficiency with the South Campus total consumption. This study is based on two different scenarios: the first one considers the solar arrays installation in the buildings roofs, and the second one includes in the layout the vacant lots and rooftops. These studies allow verifying the feasibility of the project, and provide specific information related to the advantages and drawbacks of each scenario.

Resonancias de los paradigmas científicos en las arquitecturas de la Escuela de Madrid

Los años cincuenta y sesenta son los años de la incorporación definitiva de la arquitectura española al panorama internacional. Entre los arquitectos que protagonizan ese salto sin retorno, se encuentra el grupo de aquellos que unos años más tarde serán denominados por Juan Daniel Fullaondo como Escuela de Madrid. Carlos Flores, en su libro Arquitectura Española Contemporánea 1880-1950, se refiere a esos arquitectos como aquellos que se aplicaban a la difícil tarea de restablecer en España un tipo de arquitectura que conectaba con las teorías, soluciones y lenguajes establecidos por Europa durante las primeras décadas del siglo XX. Sigfried Giedion plantea en Espacio, Tiempo y Arquitectura el origen de una nueva tradición, surgida a partir de la revolución óptica de principios de siglo. Con tradición se refiere a una nueva cultura, que abarca la interrelación de las diferentes actividades del hombre: la similitud de los métodos que se usan en la arquitectura, la construcción, la pintura, el urbanismo o la ciencia. Esa novedad, fundamentada en su independencia y desvinculación con el periodo anterior, se inscribe dentro del esquema evolutivo que Thomas Kuhn plantea en su texto La Estructura de la Revoluciones Científicas, conforme a periodos no acumulativos. Kuhn habla del surgimiento de anomalías en cada periodo, origen de las crisis de pensamiento cuya explicación precisará un necesario cambio paradigmático. En la ciencia, en el campo de la óptica Thomas Young demuestra a principios del siglo XIX la naturaleza ondulatoria de la luz con su experimento de doble rendija; en el electromagnetismo se produce el salto conceptual que supone la postulación de la existencia del campo eléctrico por parte de Michael Faraday, y en termodinámica la consideración apuntada por Planck de que la radiación de la energía de produce de forma discreta, a través de cuantos. En las artes plásticas, paralelamente, Gleizes y Metzinger, en su recopilación de logros cubistas recogida en Sobre el Cubismo, hablan de la evolución sufrida durante el siglo XIX por la pintura: desde el idealismo de principios de siglo, para pasando por el realismo y la representación impresionista de la realidad, concluir prescindiendo de la perspectiva clásica. También la matemática, una vez desarrolladas por Gauss o Lobachevsky y Bolyai geometrías coherentes que incumplen el quinto postulado de Euclides, terminará dando validez a través de Riemann a los espacios ambiente en los que habitan dichas geometrías, desvinculando la relación directa entre espacio geométrico –el espacio ambiente al que da lugar un tipo de geometría- y el espacio físico. Capi Corrales refleja en su libro Contando el Espacio, cómo hasta la teoría de la relatividad y el cubismo, las geometrías no euclídeas no se hicieron notorias también fuera del campo de las matemáticas. El origen de la nueva tradición con la que Giedion se refiere a la nueva cultura de la modernidad coincide con los saltos paradigmáticos que suponen la teoría de la relatividad en las ciencias y el cubismo en las artes plásticas. Ambas se prolongan durante las primeras décadas hasta la teoría cuántica y la abstracción absoluta, barreras que los dos principales precursores de la relatividad y el cubismo, Einstein y Picasso, nunca llegan a franquear. En ese sentido Giedion habla también, además del origen, de su desarrollo, e incorpora las aportaciones periféricas en la arquitectura de Brasil, Japón o Finlandia, incluyendo por tanto la revisión orgánica propugnada por Zevi como parte de esa nueva tradición, quedando abierta a la incorporación tardía de nuevas aportaciones al desarrollo de esa cultura de la modernidad. Eliminado el concepto de la estética trascendental de Kant del tiempo como una referencia absoluta, y asumido el valor constante de la velocidad de la luz, para la teoría de la relatividad no existe una simultaneidad auténtica. Queda así fijada la velocidad de la luz como uno de los límites del universo, y la equivalencia entre masa y energía. En el cubismo la simultaneidad espacial viene motivada por la eliminación del punto de vista preferente, cuyo resultado es la multiplicidad descriptiva de la realidad, que se visualiza en la descomposición en planos, tanto del objeto como del espacio, y la consecuente continuidad entre fondo y figura que en arquitectura se refleja en la continuidad entre edificio y territorio. Sin la consideración de un punto de vista absoluto, no existe una forma auténtica. El cubismo, y su posterior desarrollo por las vanguardias plásticas, hacen uso de la geometría como mecanismo de recomposición de la figura y el espacio, adoptando mecanismos de penetración, superposición y transparencia. Gyorgy Kepes indica en El Lenguaje de la Visión que la descomposición cubista del objeto implica la sucesiva autonomía de los planos, hasta convertirse en elementos constituyentes. Algo que refleja las axonometrías arquitectónicas de Van Doesburg y que culmina con los espacios propuestos por Mies van der Rohe en sus primeros proyectos europeos. Estos mecanismos, encuentran eco en los primeros planteamientos de Javier Carvajal: en la ampliación del Panteón de españoles del cementerio de Campo Verano, un recinto virtual reconstruido mentalmente a partir del uso de tres únicos planos; o en el Pabellón de Nueva York, que organiza su planta baja desde el recorrido, introduciendo el parámetro temporal como una dimensión más. Al uso diferenciado del plano como elemento constituyente, Carvajal incorpora su plegado y su disposición conformando envolventes como mecanismo de cualificación espacial y formal, potenciando la prolongación entre arquitectura y territorio. Una continuidad que quedará culminada en las dos viviendas unifamiliares construidas en Somosaguas. La descomposición volumétrica conduce a unos niveles de abstracción que hace precisa la incorporación de elementos de la memoria -fuentes, patios, celosías…- a modo de red de señales, como las que Picasso y Braque introducen en sus cuadros para permitir su interpretación. Braque insiste en el interés por el espacio que rodea a los objetos. Una búsqueda de la tactilidad del espacio contraria a la perspectiva que aleja el objeto del observador, y que en los jardines de las viviendas de Somosaguas parece emanar de su propia materialidad. Un espacio táctil alejado del espacio geométrico y que Braque identifica con el espacio representativo en el que Poincaré, en La Ciencia y la Hipótesis, ubica nuestras sensaciones. Desdibujar los límites del objeto prolonga el espacio indefinidamente. Con el paso en el arte griego del mito al logos, se abre paso a la matemática como herramienta de comprensión de la naturaleza hasta el siglo XIX. Leon Lederman, en Simetría y la Belleza del Universo, apunta a que una de las mayores contribuciones de la teoría de Einstein es hacer cambiar el modo de pensar la naturaleza, orientándolo hacia la búsqueda de los principios de simetría que subyacen bajo las leyes físicas. Considerando que la simetría es la invariancia de un objeto o un sistema frente a una transformación y que las leyes físicas son las mismas en cualquier punto del espacio, el espacio de nuestro universo posee una simetría traslacional continua. En la ocupación del espacio de las primeras propuestas de Corrales y Molezún aparecen estructuras subyacentes que responden a enlosetados: paralelogramos sometidos a transformaciones continuas, que la naturaleza identifica tridimensionalmente con los grupos cristalográficos. Las plantas del museo de Arte Contemporáneo de la Castellana, la residencia de Miraflores, el pabellón de Bruselas o la torre Peugeot pertenecen a este grupo. La arquitectura como proceso de ocupación continua del territorio y de su trasposición al plano de cubierta, se materializa en líneas estructurales coincidentes con la estructura matemática de sus simetrías de traslación cuya posibilidad de prolongación infinita queda potenciada por el uso de la envolvente transparente. Junto a esta transparencia literal, inherente al material, Colin Rowe y Robert Slutzky nos alertan sobre otra transparencia inherente a la estructura: la transparencia fenomenal, ilustrada por los cuadros de Juan Gris, y cuya intuición aparece reflejada en la casa Huarte en Puerta de Hierro de Madrid. Corrales y Molezún insisten en una lectura de su volumetría alejada de la frontalidad, en la que los contornos de sus cubiertas inclinadas y las visuales tangenciales sugeridas por la organización de sus recorridos introducen una estructura diagonal que se superpone al entendimiento ortogonal de su planta, dibujando una intrincada red de líneas quebradas que permiten al espacio fluctuar entre las secuencia volumétrica propuesta. Los datos relativos al contenido energético de la luz y el concepto de átomo parten de la consideración de la emisión de energía en cuantos realizada por Planck, y concluyen con una circunstancia paradójica: la doble naturaleza de la luz -demostrada por la explicación de Einstein del efecto fotoeléctrico- y la doble naturaleza de la materia -asumida por Bohr y demostrada por el efecto Compton-. Schrödinger y Heisenberg formularán finalmente la ecuación universal del movimiento que rige en las ondas de materia, y cuya representación matemática es lo que se conoce como función de onda. El objeto es así identificado con su función de onda. Su ondulatoriedad expresará la probabilidad de encontrarse en un lugar determinado. Gyorgy Kepes subraya la necesidad de simplificar el lenguaje para pasar de la objetividad que aún permanece en la pintura cubista a la abstracción total del espacio. Y es así como los artistas plásticos reducen los objetos a simples formas geométricas, haciendo aflorar a la vez, las fuerzas plásticas que los tensionan o equilibran, en un proceso que acaba por eliminar cualquier atisbo de materia. Robert Rosenblum en La Pintura Moderna y la Tradición del Romanticismo Nórdico habla de cómo ese rechazo de la materia en favor de un vacío casi impalpable, campos luminosos de color denso que difunden un sereno resplandor y parecen engendrar las energías elementales de la luz natural, está directamente vinculado a la relación con la naturaleza que establece el romanticismo nórdico. La expresión de la energía de la naturaleza concentrada en un vacío que ya había sido motivo de reflexión para Michael Faraday en su postulación del concepto de campo eléctrico. Sáenz de Oíza incide en la expresión de la condición material de la energía en su propuesta junto a José Luis Romany para la capilla en el Camino de Santiago. La evocación de diferentes fuerzas electromagnéticas, las únicas junto a las gravitatorias susceptibles de ser experimentadas por el hombre, aparecerán visualizadas también en el carácter emergente de algunas de sus obras: el Santuario de Aránzazu o Torres Blancas; pero también en la naturaleza fluyente de sus contornos, la dispersión perimetral de los espacios -el umbral como centro del universoo la configuración del límite como respuesta a las tensiones germinales de la naturaleza. Miguel Fisac, a la vuelta de su viaje a los países nórdicos, aborda una simplificación lingüística orientada hacia la adecuación funcional de los espacios. En el Instituto de Daimiel, el Instituto de formación del profesorado o los complejos para los Padres Dominicos en Valladolid o Alcobendas, organiza progresivamente la arquitectura en diferentes volúmenes funcionales, incidiendo de un modo paralelo en la manifestación de los vínculos que se establecen entre dichos volúmenes como una visualización de las fuerzas que los tensionan y equilibran. En ellos la prolongación de la realidad física más allá de los límites de la envolvente ya es algo más que una simple intuición. Un proceso en el que el tratamiento de la luz como un material de construcción más, tendrá un especial protagonismo. En la iglesia de la Coronación, la iluminación del muro curvo escenifica la condición ondulatoria de la luz, manifestándose como si de un patrón de interferencia se tratara. Frente a la disolución de lo material, el espacio se manifiesta aquí como un medio denso, alejado de la tradicional noción de vacío. Una doble naturaleza, onda y partícula, que será intuido también por Fisac en la materia a través de su uso comprometido del hormigón como único material de construcción. Richard Feynmann nos alerta de la ocupación del espacio por multitud de fuerzas electromagnéticas que, al igual que la luz, precisan de receptores específicos para captar su presencia. Sus célebres diagramas suponen además la visualización definitiva de los procesos subatómicos. Al igual que la abstracción absoluta en las artes plásticas, esas representaciones diagramáticas no son asimilables a imágenes obtenidas de nuestra experiencia. Una intuición plasmada en el uso del diagrama, que irán adquiriendo progresivamente los dibujos de Alejandro de la Sota. La sección del gimnasio Maravillas recoge los trazos de sus principales elementos constructivos: estructura, cerramientos, compartimentaciones…, pero también, y con la misma intensidad, los de las fuerzas que generan su espacio, considerando así su condición de elementos constituyentes. El vacío, nos deja claro Sota, es el lugar donde habitan dichas tensiones. La posterior simplificación de las formas acompañadas de la obsesión por su aligeramiento, la casi desaparición de la envolvente, incide en aquella idea con la que Paul Klee define la actividad del artista en su Teoría del Arte Moderno, y en la que se transmite el distanciamiento hacia lo aparente: No se trata de reproducir lo visible, se trata de volver visible. Así, en Bankunión y Aviaco, como en tantos otros proyectos, frente al objetivo de la forma, Sota plantea el límite como la acotación de un ámbito de actuación. Su propia representación aséptica y diagramática transmite la renuncia a una especificidad espacial. Gilles Deleuze expresa ese posicionamiento en Pintura, el Concepto de Diagrama: el diagrama como la posibilidad de cuadros infinitos, o la posibilidad infinita de cuadros. Aparece así una concepción probabilística del espacio en la que frente a la renuncia por la forma, la tendencia al aligeramiento, y lo difuso de su definición – ideas claras, definición borrosa, en palabras de Llinás referidas al modo de operar de Sota-, la insistente atención a algunos elementos como escaleras, protecciones o miradores parece trasmitir la idea de que la arquitectura queda condensada en aquellos acontecimientos que delatan su condición dinámica, transitoria. Primando la relación frente al objeto, el vínculo frente a lo tangible. English summary. The fifties and sixties were the years of the final incorporation of Spanish architecture to the international scene. Among the architects who star that no return leap, is the group of those who a few years later will be named by Juan Daniel Fullaondo as Escuela de Madrid. Carlos Flores, in his book Arquitectura Española Contemporánea 1880-1950, refers to those architects as those that applied to the difficult task of restoring in Spain an architecture that connected with theories, solutions and established languages in Europe during the first decades of the twentieth century. Sigfried Giedion proposes in Space, Time and Architecture, the origin of a new tradition, arising from the optical revolution at the beginning of the century. With tradition he refers to a new culture, covering the interplay of different human activities: the similarity of the methods used in architecture, building, painting, urban planning or science. This new feature, based on its independence and detachment from the previous period, is part of the evolutionary scheme that Thomas Kuhn proposes in his text The Structure of Scientific Revolutions, according to non-accumulative periods. Kuhn talks about the emergence of anomalies in each period, origin of thought crisis whose explanation will require a paradigm shift needed. In science, in the field of optical Thomas Young demonstrates at the early nineteenth century the wave nature of light with its double-slit experiment , in electromagnetism the postulation of the existence of the electric field by Michael Faraday involves a conceptual leap, and in thermodynamic, the consideration pointed by Planck about quantum energy radiation. In the arts, in a parallel process, Gleizes and Metzinger , in his collection of cubism achievements on their book Du Cubisme, speak of evolution occurring during the nineteenth century by the painting: from the idealism of beginning of the century, going for realism and impressionist representation of reality, and finishing regardless of the classical perspective . Mathematics also, once developed by Gauss and Lobachevsky and Bolyai consistent geometries that violate Euclid's fifth postulate , will end validating Riemann’s ambient spaces in which these geometries inhabit, decoupling the direct relationship between geometric space -the space environment that results in a type of geometry- , and physical space. Capi Corrales reflectes in his book Contando el Espacio, that non-Euclidean geometries were not noticeable outside the field of mathematics until the theory of relativity and cubism. The origin of the new tradition that Giedion relates to the new culture of modernity coincides with paradigmatic leaps pointed by the theory of relativity in science and Cubism in the visual arts. Both are extended during the first decades until quantum theory and absolute abstraction, barriers that the two main precursors of relativity and cubism, Einstein and Picasso never overcome. In that sense Giedion speaks about the origin, but also the development, and incorporates peripheral inputs from Brazil, Japan and Finland architecture, thus including organic revision advocated by Zevi as part of this new tradition, being open to the late addition of new contributions to the development of that culture of modernity. Removed the concept of Kant's transcendental aesthetics, of time as an absolute reference, and assumed the constant value of the speed of light, theory of relativity says there is no authentic concurrency. It is thus fixed the speed of light as one of the limits of the universe, and the equivalence of mass and energy. In cubism, spatial simultaneity results from the elimination of preferential points of view, resulting in the multiplicity descriptive of reality, which is displayed in decomposition levels, both the object and the space, and the resulting continuity between figure and background that architecture is reflected in the continuity between building and land. Without the consideration of an absolute point of view, there isn’t an authentic shape. Cubism, and its subsequent development by the vanguard arts, make use of geometry as a means of rebuilding the figure and space, taking penetration mechanisms, overlapping and transparency. Gyorgy Kepes suggest in Languaje of Vision, that cubist decomposition of the object involves successive planes autonomy, to become constituent elements. Something that reflects the Van Doesburg’s architectural axonometrics and culminates with the spaces proposed by Mies van der Rohe in his first European projects. These mechanisms are reflected in the first approaches by Javier Carvajal: the extension of Spanish Pantheon in Campo Verano Cemetery, virtual enclosure mentally reconstructed from 24 the use of only three planes, or in the Spanish Pavilion of New York, which organizes its ground floor from the tour, introducing the time parameter as an additional dimension. Carvajal adds to the differential use of the plane as a constituent, Carvajal incorporates its folding and forming enclosures available as a mechanism for spatial and formal qualification, promoting the extension between architecture and territory. A continuity that will be completed in the two houses built in Somosaguas. Volumetric decomposition, as the fragmentation achieved in the last cubist experiences, needs the incorporation of elements of memory - fountains, patios, shutters...- as a network of signals, such as those introduced by Picasso and Braque in their paintings to allow their interpretation. Braque insists in his interest in the space surrounding the objects. A search of the tactility of space contrary to the perspective, which moves the observer away from the object, and that in the gardens of Somosaguas seems to emanate from its own materiality. A tactile space away from the geometric space and Braque identified with the representative space in which Poincaré in La Science et l´hypothèse, located our feelings. To blur those boundaries of the object extends the space indefinitely. With the passage in Greek art from myth to logos, it opens up to mathematics as a tool for understanding the nature until the nineteenth century. Leon Lederman, in Symmetry and beautiful Universe, suggests that one of the greatest contributions of Einstein's theory is to change the mindset of nature, namely the search for symmetry principles that underlie physical laws. Considering that symmetry is the invariance of an object or system from a transformation and that physical laws are the same at any point in space, the space of our universe has a continuous translational symmetry. In the space occupation of the first proposals by Corrales and Molezún underlying structures appear that match enlosetados: parallelograms under continuous transformations, which nature identifies tridimensionally with the crystallographic groups. Plants in the Contemporary Art Museum in La Castellana, the residence in Miraflores, the Brussels pavilion or the Peugeot tower belong to this group. The architecture as a process of continuous occupation of the territory and of its transposition to the deck, embodied in structural lines coincide with the mathematical structure of the translational symmetry and infinite extension whose possibility is enhanced by the use of the transparent cover. Alongside this literal transparency inherent to the material, Colin Rowe and Robert Slutzky alert us another transparency inherent in the structure: phenomenal transparency, illustrated by the Juan Gris’ works, and whose intuition is reflected in the Huarte’s house in Puerta de Hierro in Madrid. Corrales and Molezún insist on a reading of its volume away from the frontal, in which the outline of their inclined roofs and tangential visual suggested by the organization of his circulations introduce a diagonal structure which overlaps the orthogonal understanding of its plant, drawing an intricate web of broken lines that allow the space fluctuate between the volumetric sequence proposal. Information concerning to the energy mean of light and the concept of atom start from the consideration by Plank about the energy emission, and conclude with a paradoxical situation: the dual nature of light - demonstrated by the explanation of Einstein's photoelectric effect-, and the dual nature of matter -assumed by Bohr and demonstrated by the Compton effect-. Finally, Schrödinger and Heisenberg will formulate the universal movement equation governing in undulatory matter, whose mathematical representation is what is known as a wave function. The object is thus identified with its wave function. Its undulatory expression speaks about the probability of being found in a certain place. Gyorgy Kepes emphasizess the need to simplify the language to move from the objectivity that still remains in the cubist painting to the total abstraction of the space. And this is how artists reduced the objects to simple geometric shapes, making emerge at a time, the plastic forces that tense or balance them, in a process that eventually eliminate any trace of matter. Robert Rosenblum in Modern Painting and the Northern Romantic Tradition. Friedrich to Rothko talks about how this rejection of matter in an almost impalpable vacuum: dense color light fields that broadcast a serene glow and seem to generate the elemental energies of natural light is directly linked to the relationship with nature that sets the northern romanticism. An expression of the power of nature concentrated in a vacuum which had been reason for thought by Michael Faraday in his application of the concept of electric field. Saenz de Oíza touches upon the material expression of the energy in its proposal with Jose Luis Romany to the chapel on the Camino de Santiago. The presence of electromagnetic forces, the only ones with the gravitational one capable of being experienced by the man will also visualize in the emerging nature of some of his works: the sanctuary of Aránzazu or Torres Blancas, but also in the flowing nature of its contours, and the inclusion of interest in the realization of space fluctuating boundary: the threshold as the center of the universe. Miguel Fisac, back from his trip to the Northern Countries, starts on a linguistic simplification oriented to the functional adequacy of spaces. In the Daimiel Institute, in the Institute to Teacher Formation or in the complex to the Dominican Fathers in Valladolid or Alcobendas, progressively organized into different functional volumes architecture, focusing in a parallel way in the manifestation of the links established between these volumes as a visualization of the forces that tense and balance them. The prolongation of the physical reality beyond the limits of the envelope is already something more than a simple intuition. A process in which the treatment of light as a construction material, have a special role. In the Coronation church, curved wall lighting dramatizes the undulatory condition of the light, manifesting as if an interference pattern is involved. Versus the dissolution of the material, the space is expressed here as a dense atmosphere, away from the traditional notion of the vacuum. A dual nature, wave and particle, which is also sensed by Fisac in his committed use of concrete as a unique construction material. Richard Feynman alerts us to the occupation of space by many electromagnetic forces, which like the light, require specific receptors to capture their presence. His famous diagrams also involve the final visualization of atomic processes. As absolute abstraction in the visual arts, these representations are not assimilated to images obtained from our experience. A diagrammatic nature, abstracted from figuration, which will obtein the pictures of Alejandro de la Sota. The section of Maravillas gym collects traces of its main building blocks: structure, enclosures... but also, and with the same intensity, of the forces that generate their space as constituent elements. Sota makes it clear: the vacuum is where inhabit these tensions. The subsequent simplification of forms, accompanied by the obsession with his lightening, the near disappearance of the envelope, touches upon that idea which Paul Klee defines the activity of the artist in his Modern Art Theory, the spacing out to the apparent: it is not to reproduce the visible, it is to turn visible. Thus, in Bankunión and Aviaco, as in many other projects, against the shape, raises the limit as the dimension of a scope. His own aseptic and diagrammatic representation transmits waiver to a spatial specificity that Gilles Deleuze clearly expressed in Painting. The Concept Diagram: The diagram as the possibility of infinite pictures, or infinite possibility of the picture. Thus appears the probabilistic concept of space in which, opposite to the diffuse of its definition -clear ideas, diffuse definition, as Llinas said- the insistent attention to some elements like stairs, guards or lookouts seems to concentrate the architecture in its dynamic condition, transitional. The relationship opposite the object, the link opposite the tangible.

Great roof marquee in the new railway station for high speed trains of Málaga

The new railway station of María Zambrano for AVE (Spanish high-speed trains) located in Malaga, has been inaugurated in November 2006, just on the site of the former railway station. The new railway station with an investment of 134.7 million Euros occupies a surface of 51.377 m2, five times the surface of the former station. The enclosure is the biggest intermodal transport and commercial center of Spain which comprises a parking of 21,000 m2 for 1,300 parking places, one commercial area and a hotel of 35 m height, with a total extension constructed of approximately 100,000 m2.