El problema isostático inverso de Vening Meinesz. Teoría y desarrollo. Aplicación práctica para la determinación de la profundidad de la discontinuidad de Mohorovičić en la Península Ibérica

La discontinuidad de Mohorovičić, más conocida simplemente como “Moho” constituye la superficie de separación entre los materiales rocosos menos densos de la corteza y los materiales rocosos más densos del manto, suponiendo estas capas de densidad constante del orden de 2.67 y 3.27 g/cm3, y es un contorno básico para cualquier estudio geofísico de la corteza terrestre. Los estudios sísmicos y gravimétricos realizados demuestran que la profundidad del Moho es del orden de 30-40 km por debajo de la Península Ibérica y 5-15 km bajo las zonas marinas. Además las distintas técnicas existentes muestran gran correlación en los resultados. Haciendo la suposición de que el campo de gravedad de la Península Ibérica (como le ocurre al 90% de la Tierra) está isostáticamente compensado por la variable profundidad del Moho, suponiendo un contraste de densidad constante entre la corteza y el manto y siguiendo el modelo isostático de Vening Meinesz (1931), se formula el problema isostático inverso para obtener tal profundidad a partir de la anomalía Bouguer de la gravedad calculada gracias a la gravedad observada en la superficie terrestre. La particularidad de este modelo es la compensación isostática regional de la que parte la teoría, que se asemeja a la realidad en mayor medida que otros modelos existentes, como el de Airy-Heiskanen, que ha sido históricamente el más utilizado en trabajos semejantes. Además, su solución está relacionada con el campo de gravedad global para toda la Tierra, por lo que los actuales modelos gravitacionales, la mayoría derivados de observaciones satelitales, deberían ser importantes fuentes de información para nuestra solución. El objetivo de esta tesis es el estudio con detalle de este método, desarrollado por Helmut Moritz en 1990, que desde entonces ha tenido poca evolución y seguidores y que nunca se ha puesto en práctica en la Península Ibérica. Después de tratar su teoría, desarrollo y aspectos computacionales, se está en posición de obtener un modelo digital del Moho para esta zona a fin de poder utilizarse para el estudio de la distribución de masas bajo la superficie terrestre. A partir de los datos del Moho obtenidos por métodos alternativos se hará una comparación. La precisión de ninguno de estos métodos es extremadamente alta (+5 km aproximadamente). No obstante, en aquellas zonas donde exista una discrepancia de datos significaría un área descompensada, con posibles movimientos tectónicos o alto grado de riesgo sísmico, lo que le da a este estudio un valor añadido. ABSTRACT The Mohorovičić discontinuity, simply known as “Moho” constitutes the division between the rocky and less thick materials of the mantle and the heavier ones in the crust, assuming densities of the orders of 2.67 y 3.27 g/cm3 respectively. It is also a basic contour for every geophysical kind of studies about the terrestrial crust. The seismic and previous gravimetric observations done in the study area show that the Moho depth is of the order of 30-40 km beneath the ground and 5-15 km under the ocean basin. Besides, the different techniques show a good correlation in their results. Assuming that the Iberian Peninsula gravity field (as it happens for the 90% of the Earth) is isostatically compensated according to the variable Moho depth, supposing a constant density contrast between crust and mantle, and following the isostatic Vening Meinesz model (1931), the inverse isostatic problem can be formulated from Bouguer gravity anomaly data obtained thanks to the observed gravity at the surface of the Earth. The main difference between this model and other existing ones, such as Airy- Heiskanen’s (pure local compensation and mostly used in these kinds of works) is the approaching to a regional isostatic compensation, much more in accordance with reality. Besides, its solution is related to the global gravity field, and the current gravitational models -mostly satellite derived- should be important data sources in such solution. The aim of this thesis is to study with detail this method, developed by Helmut Moritz in 1990, which hardly ever has it put into practice. Moreover, it has never been used in Iberia. After studying its theory, development and computational aspects, we are able to get a Digital Moho Model of the Iberian Peninsula, in order to study the masses distribution beneath the Earth’s surface. With the depth Moho information obtained from alternative methods, a comparison will be done. Both methods give results with the same order of accuracy, which is not quite high (+ 5 km approximately). Nevertheless, the areas in which a higher difference is observed would mean a disturbance of the compensation, which could show an unbalanced area with possible tectonic movements or potential seismic risk. It will give us an important additive value, which could be used in, at first, non related fields, such as density discrepancies or natural disasters contingency plans.

Massively parallelizable list-mode reconstruction using a Monte Carlo-based elliptical Gaussian model

Purpose: A fully three-dimensional (3D) massively parallelizable list-mode ordered-subsets expectation-maximization (LM-OSEM) reconstruction algorithm has been developed for high-resolution PET cameras. System response probabilities are calculated online from a set of parameters derived from Monte Carlo simulations. The shape of a system response for a given line of response (LOR) has been shown to be asymmetrical around the LOR. This work has been focused on the development of efficient region-search techniques to sample the system response probabilities, which are suitable for asymmetric kernel models, including elliptical Gaussian models that allow for high accuracy and high parallelization efficiency. The novel region-search scheme using variable kernel models is applied in the proposed PET reconstruction algorithm. Methods: A novel region-search technique has been used to sample the probability density function in correspondence with a small dynamic subset of the field of view that constitutes the region of response (ROR). The ROR is identified around the LOR by searching for any voxel within a dynamically calculated contour. The contour condition is currently defined as a fixed threshold over the posterior probability, and arbitrary kernel models can be applied using a numerical approach. The processing of the LORs is distributed in batches among the available computing devices, then, individual LORs are processed within different processing units. In this way, both multicore and multiple many-core processing units can be efficiently exploited. Tests have been conducted with probability models that take into account the noncolinearity, positron range, and crystal penetration effects, that produced tubes of response with varying elliptical sections whose axes were a function of the crystal's thickness and angle of incidence of the given LOR. The algorithm treats the probability model as a 3D scalar field defined within a reference system aligned with the ideal LOR. Results: This new technique provides superior image quality in terms of signal-to-noise ratio as compared with the histogram-mode method based on precomputed system matrices available for a commercial small animal scanner. Reconstruction times can be kept low with the use of multicore, many-core architectures, including multiple graphic processing units. Conclusions: A highly parallelizable LM reconstruction method has been proposed based on Monte Carlo simulations and new parallelization techniques aimed at improving the reconstruction speed and the image signal-to-noise of a given OSEM algorithm. The method has been validated using simulated and real phantoms. A special advantage of the new method is the possibility of defining dynamically the cut-off threshold over the calculated probabilities thus allowing for a direct control on the trade-off between speed and quality during the reconstruction.

Vocal tract settings in speakers suffering from obstructive sleep apnea síndrome

Automatic systems based on speech signal analysis for the early dete ction of obstructive sleep apnea (OSA) have achieved fairly high performance rates in recent years. However, a satisfactory explanation of these results has not been available. This presentation aims at explaining via an examination of the long-term spectra of OSA patients and normal control speakers these systems’ ability to discover OSA speakers on the base of all-purpose cepstral coefficients. An in terpretation of the long- term spectra in terms of the underlying tract settings suggests that the speech of OSA patients is characterized by a pharyngeal narrowing that may be captured by acoustic cues of the spectral contour of windowed speech frames. A novel interpretation of long-term spectra in terms of the first principal component of the temporal sequence of short-term amplitude-spectra is also discussed.

Higher-order regularization and morphological techniques for image segmentation

La segmentación de imágenes es un campo importante de la visión computacional y una de las áreas de investigación más activas, con aplicaciones en comprensión de imágenes, detección de objetos, reconocimiento facial, vigilancia de vídeo o procesamiento de imagen médica. La segmentación de imágenes es un problema difícil en general, pero especialmente en entornos científicos y biomédicos, donde las técnicas de adquisición imagen proporcionan imágenes ruidosas. Además, en muchos de estos casos se necesita una precisión casi perfecta. En esta tesis, revisamos y comparamos primero algunas de las técnicas ampliamente usadas para la segmentación de imágenes médicas. Estas técnicas usan clasificadores a nivel de pixel e introducen regularización sobre pares de píxeles que es normalmente insuficiente. Estudiamos las dificultades que presentan para capturar la información de alto nivel sobre los objetos a segmentar. Esta deficiencia da lugar a detecciones erróneas, bordes irregulares, configuraciones con topología errónea y formas inválidas. Para solucionar estos problemas, proponemos un nuevo método de regularización de alto nivel que aprende información topológica y de forma a partir de los datos de entrenamiento de una forma no paramétrica usando potenciales de orden superior. Los potenciales de orden superior se están popularizando en visión por computador, pero la representación exacta de un potencial de orden superior definido sobre muchas variables es computacionalmente inviable. Usamos una representación compacta de los potenciales basada en un conjunto finito de patrones aprendidos de los datos de entrenamiento que, a su vez, depende de las observaciones. Gracias a esta representación, los potenciales de orden superior pueden ser convertidos a potenciales de orden 2 con algunas variables auxiliares añadidas. Experimentos con imágenes reales y sintéticas confirman que nuestro modelo soluciona los errores de aproximaciones más débiles. Incluso con una regularización de alto nivel, una precisión exacta es inalcanzable, y se requeire de edición manual de los resultados de la segmentación automática. La edición manual es tediosa y pesada, y cualquier herramienta de ayuda es muy apreciada. Estas herramientas necesitan ser precisas, pero también lo suficientemente rápidas para ser usadas de forma interactiva. Los contornos activos son una buena solución: son buenos para detecciones precisas de fronteras y, en lugar de buscar una solución global, proporcionan un ajuste fino a resultados que ya existían previamente. Sin embargo, requieren una representación implícita que les permita trabajar con cambios topológicos del contorno, y esto da lugar a ecuaciones en derivadas parciales (EDP) que son costosas de resolver computacionalmente y pueden presentar problemas de estabilidad numérica. Presentamos una aproximación morfológica a la evolución de contornos basada en un nuevo operador morfológico de curvatura que es válido para superficies de cualquier dimensión. Aproximamos la solución numérica de la EDP de la evolución de contorno mediante la aplicación sucesiva de un conjunto de operadores morfológicos aplicados sobre una función de conjuntos de nivel. Estos operadores son muy rápidos, no sufren de problemas de estabilidad numérica y no degradan la función de los conjuntos de nivel, de modo que no hay necesidad de reinicializarlo. Además, su implementación es mucho más sencilla que la de las EDP, ya que no requieren usar sofisticados algoritmos numéricos. Desde un punto de vista teórico, profundizamos en las conexiones entre operadores morfológicos y diferenciales, e introducimos nuevos resultados en este área. Validamos nuestra aproximación proporcionando una implementación morfológica de los contornos geodésicos activos, los contornos activos sin bordes, y los turbopíxeles. En los experimentos realizados, las implementaciones morfológicas convergen a soluciones equivalentes a aquéllas logradas mediante soluciones numéricas tradicionales, pero con ganancias significativas en simplicidad, velocidad y estabilidad. ABSTRACT Image segmentation is an important field in computer vision and one of its most active research areas, with applications in image understanding, object detection, face recognition, video surveillance or medical image processing. Image segmentation is a challenging problem in general, but especially in the biological and medical image fields, where the imaging techniques usually produce cluttered and noisy images and near-perfect accuracy is required in many cases. In this thesis we first review and compare some standard techniques widely used for medical image segmentation. These techniques use pixel-wise classifiers and introduce weak pairwise regularization which is insufficient in many cases. We study their difficulties to capture high-level structural information about the objects to segment. This deficiency leads to many erroneous detections, ragged boundaries, incorrect topological configurations and wrong shapes. To deal with these problems, we propose a new regularization method that learns shape and topological information from training data in a nonparametric way using high-order potentials. High-order potentials are becoming increasingly popular in computer vision. However, the exact representation of a general higher order potential defined over many variables is computationally infeasible. We use a compact representation of the potentials based on a finite set of patterns learned fromtraining data that, in turn, depends on the observations. Thanks to this representation, high-order potentials can be converted into pairwise potentials with some added auxiliary variables and minimized with tree-reweighted message passing (TRW) and belief propagation (BP) techniques. Both synthetic and real experiments confirm that our model fixes the errors of weaker approaches. Even with high-level regularization, perfect accuracy is still unattainable, and human editing of the segmentation results is necessary. The manual edition is tedious and cumbersome, and tools that assist the user are greatly appreciated. These tools need to be precise, but also fast enough to be used in real-time. Active contours are a good solution: they are good for precise boundary detection and, instead of finding a global solution, they provide a fine tuning to previously existing results. However, they require an implicit representation to deal with topological changes of the contour, and this leads to PDEs that are computationally costly to solve and may present numerical stability issues. We present a morphological approach to contour evolution based on a new curvature morphological operator valid for surfaces of any dimension. We approximate the numerical solution of the contour evolution PDE by the successive application of a set of morphological operators defined on a binary level-set. These operators are very fast, do not suffer numerical stability issues, and do not degrade the level set function, so there is no need to reinitialize it. Moreover, their implementation is much easier than their PDE counterpart, since they do not require the use of sophisticated numerical algorithms. From a theoretical point of view, we delve into the connections between differential andmorphological operators, and introduce novel results in this area. We validate the approach providing amorphological implementation of the geodesic active contours, the active contours without borders, and turbopixels. In the experiments conducted, the morphological implementations converge to solutions equivalent to those achieved by traditional numerical solutions, but with significant gains in simplicity, speed, and stability.

Effect of strain and magnetic field on the critical current and electric resistance of the joints between HTS coated conductors

Engineering of devices and systems such as magnets, fault current limiters or cables, based on High Temperature Superconducting wires requires a deep characterization of the possible degradation of their properties by handling at room temperature as well as during the service life thus establishing the limits for building up functional devices and systems. In the present work we report our study regarding the mechanical behavior of spliced joints between commercial HTS coated conductors based on YBCO at room temperature and service temperature, 77 K. Tensile tests under axial stress and the evolution of the critical current and the electric resistance of the joints have been measured. The complete strain contour for the tape and the joint has been obtained by using Digital Image Correlation. Also, tensile tests under external magnetic field have been performed and the effect of the applied field on the critical current and the electric resistance of the joints has been studied. Finally, a preliminary numerical study by means of Finite Element Method (FEM) of the mechanical behavior of the joints between commercial HTS is presented.

Effect of strain and magnetic field on the critical current and electric resistance of the joints between HTS coated conductors

Engineering of devices and systems such as magnets, fault current limiters or cables, based on High Temperature Superconducting wires requires a deep characterization of the possible degradation of their properties by handling at room temperature as well as during the service life thus establishing the limits for building up functional devices and systems. In the present work we report our study regarding the mechanical behavior of spliced joints between commercial HTS coated conductors based on YBCO at room temperature and service temperature, 77 K. Tensile tests under axial stress and the evolution of the critical current and the electric resistance of the joints have been measured. The complete strain contour for the tape and the joints has been obtained by using Digital Image Correlation. Also, tensile tests under external magnetic field have been performed and the effect of the applied field on the critical current and the electric resistance of the joints has been studied. Additionally, fatigue tests under constant cyclic stress and loading-unloading ramps have been carried out in order to evaluate the electromechanical behavior of the joints and the effect of maximum applied stress on the critical current. Finally, a preliminary numerical study by means of the Finite Element Method (FEM) of the electromechanical behavior of the joints between commercial HTS is presented.

Generación de modelos físicos personalizados y segmentación de la pared arterial y el trombo intraluminal en imágenes de aneurismas aórticos abdominales

Esta tesis doctoral está encuadrada dentro del marco general de la ingeniería biomédica aplicada al tratamiento de las enfermedades cardiovasculares, enfermedades que provocan alrededor de 1.9 millones (40%) de muertes al año en la Unión Europea. En este contexto surge el proyecto europeo SCATh-Smart Catheterization, cuyo objetivo principal es mejorar los procedimientos de cateterismo aórtico introduciendo nuevas tecnologías de planificación y navegación quirúrgica y minimizando el uso de fluoroscopía. En particular, esta tesis aborda el modelado y diagnóstico de aneurismas aórticos abdominales (AAA) y del trombo intraluminal (TIL), allí donde esté presente, así como la segmentación de estas estructuras en imágenes preoperatorias de RM. Los modelos físicos específicos del paciente, construidos a partir de imágenes médicas preoperatorias, tienen múltiples usos, que van desde la evaluación preoperatoria de estructuras anatómicas a la planificación quirúrgica para el guiado de catéteres. En el diagnóstico y tratamiento de AAA, los modelos físicos son útiles a la hora de evaluar diversas variables biomecánicas y fisiológicas de las estructuras vasculares. Existen múltiples técnicas que requieren de la generación de modelos físicos que representen la anatomía vascular. Una de las principales aplicaciones de los modelos físicos es el análisis de elementos finitos (FE). Las simulaciones de FE para AAA pueden ser específicas para el paciente y permiten modelar estados de estrés complejos, incluyendo los efectos provocados por el TIL. La aplicación de métodos numéricos de análisis tiene como requisito previo la generación de una malla computacional que representa la geometría de interés mediante un conjunto de elementos poliédricos, siendo los hexaédricos los que presentan mejores resultados. En las estructuras vasculares, generar mallas hexaédricas es un proceso especialmente exigente debido a la compleja anatomía 3D ramificada. La mayoría de los AAA se encuentran situados en la bifurcación de la arteria aorta en las arterias iliacas y es necesario modelar de manera fiel dicha bifurcación. En el caso de que la sangre se estanque en el aneurisma provocando un TIL, éste forma una estructura adyacente a la pared aórtica. De este modo, el contorno externo del TIL es el mismo que el contorno interno de la pared, por lo que las mallas resultantes deben reflejar esta particularidad, lo que se denomina como "mallas conformadas". El fin último de este trabajo es modelar las estructuras vasculares de modo que proporcionen nuevas herramientas para un mejor diagnóstico clínico, facilitando medidas de riesgo de rotura de la arteria, presión sistólica o diastólica, etc. Por tanto, el primer objetivo de esta tesis es diseñar un método novedoso y robusto para generar mallas hexaédricas tanto de la pared aórtica como del trombo. Para la identificación de estas estructuras se utilizan imágenes de resonancia magnética (RM). Deben mantenerse sus propiedades de adyacencia utilizando elementos de alta calidad, prestando especial atención al modelado de la bifurcación y a que sean adecuadas para el análisis de FE. El método tiene en cuenta la evolución de la línea central del vaso en el espacio tridimensional y genera la malla directamente a partir de las imágenes segmentadas, sin necesidad de reconstruir superficies triangulares. Con el fin de reducir la intervención del usuario en el proceso de generación de las mallas, es también objetivo de esta tesis desarrollar un método de segmentación semiautomática de las distintas estructuras de interés. Las principales contribuciones de esta tesis doctoral son: 1. El diseño, implementación y evaluación de un algoritmo de generación de mallas hexaédricas conformadas de la pared y el TIL a partir de los contornos segmentados en imágenes de RM. Se ha llevado a cabo una evaluación de calidad que determine su aplicabilidad a métodos de FE. Los resultados demuestran que el algoritmo desarrollado genera mallas conformadas de alta calidad incluso en la región de la bifurcación, que son adecuadas para su uso en métodos de análisis de FE. 2. El diseño, implementación y evaluación de un método de segmentación automático de las estructuras de interés. La luz arterial se segmenta de manera semiautomática utilizando un software disponible a partir de imágenes de RM con contraste. Los resultados de este proceso sirven de inicialización para la segmentación automática de las caras interna y externa de la pared aórtica utilizando métodos basado en modelos de textura y forma a partir de imágenes de RM sin contraste. Los resultados demuestran que el algoritmo desarrollado proporciona segmentaciones fieles de las distintas estructuras de interés. En conclusión, el trabajo realizado en esta tesis doctoral corrobora las hipótesis de investigación postuladas, y pretende servir como aportación para futuros avances en la generación de modelos físicos de geometrías biológicas. ABSTRACT The frame of this PhD Thesis is the biomedical engineering applied to the treatment of cardiovascular diseases, which cause around 1.9 million deaths per year in the European Union and suppose about 40% of deaths per year. In this context appears the European project SCATh-Smart Catheterization. The main objective of this project is creating a platform which improves the navigation of catheters in aortic catheterization minimizing the use of fluoroscopy. In the framework of this project, the specific field of this PhD Thesis is the diagnosis and modeling of abdominal aortic aneurysm (AAAs) and the intraluminal thrombus (ILT) whenever it is present. Patient-specific physical models built from preoperative imaging are becoming increasingly important in the area of minimally invasive surgery. These models can be employed for different purposes, such as the preoperatory evaluation of anatomic structures or the surgical planning for catheter guidance. In the specific case of AAA diagnosis and treatment, physical models are especially useful for evaluating pressures over vascular structures. There are multiple techniques that require the generation of physical models which represent the target anatomy. Finite element (FE) analysis is one the principal applications for physical models. FE simulations for AAA may be patient-specific and allow modeling biomechanical and physiological variables including those produced by ILT, and also the segmentation of those anatomical structures in preoperative MR images. Applying numeric methods requires the generation of a proper computational mesh. These meshes represent the patient anatomy using a set of polyhedral elements, with hexahedral elements providing better results. In the specific case of vascular structures, generating hexahedral meshes is a challenging task due to the complex 3D branching anatomy. Each patient’s aneurysm is unique, characterized by its location and shape, and must be accurately represented for subsequent analyses to be meaningful. Most AAAs are located in the region where the aorta bifurcates into the iliac arteries and it is necessary to model this bifurcation precisely and reliably. If blood stagnates in the aneurysm and forms an ILT, it exists as a conforming structure with the aortic wall, i.e. the ILT’s outer contour is the same as the wall’s inner contour. Therefore, resulting meshes must also be conforming. The main objective of this PhD Thesis is designing a novel and robust method for generating conforming hexahedral meshes for the aortic wall and the thrombus. These meshes are built using largely high-quality elements, especially at the bifurcation, that are suitable for FE analysis of tissue stresses. The method accounts for the evolution of the vessel’s centerline which may develop outside a single plane, and generates the mesh directly from segmented images without the requirement to reconstruct triangular surfaces. In order to reduce the user intervention in the mesh generation process is also a goal of this PhD. Thesis to develop a semiautomatic segmentation method for the structures of interest. The segmentation is performed from magnetic resonance image (MRI) sequences that have tuned to provide high contrast for the arterial tissue against the surrounding soft tissue, so that we determine the required information reliably. The main contributions of this PhD Thesis are: 1. The design, implementation and evaluation of an algorithm for generating hexahedral conforming meshes of the arterial wall and the ILT from the segmented contours. A quality inspection has been applied to the meshes in order to determine their suitability for FE methods. Results show that the developed algorithm generates high quality conforming hexahedral meshes even at the bifurcation region. Thus, these meshes are suitable for FE analysis. 2. The design, implementation and evaluation of a semiautomatic segmentation method for the structures of interest. The lumen is segmented in a semiautomatic way from contrast filled MRI using an available software. The results obtained from this process are used to initialize the automatic segmentation of the internal and external faces of the aortic wall. These segmentations are performed by methods based on texture and shape models from MRI with no contrast. The results show that the algorithm provides faithful segmentations of the structures of interest requiring minimal user intervention. In conclusion, the work undertaken in this PhD. Thesis verifies the investigation hypotheses. It intends to serve as basis for future physical model generation of proper biological anatomies used by numerical methods.

Traffic sign detection and tracking using robust 3D analysis

In this paper we present an innovative technique to tackle the problem of automatic road sign detection and tracking using an on-board stereo camera. It involves a continuous 3D analysis of the road sign during the whole tracking process. Firstly, a color and appearance based model is applied to generate road sign candidates in both stereo images. A sparse disparity map between the left and right images is then created for each candidate by using contour-based and SURF-based matching in the far and short range, respectively. Once the map has been computed, the correspondences are back-projected to generate a cloud of 3D points, and the best-fit plane is computed through RANSAC, ensuring robustness to outliers. Temporal consistency is enforced by means of a Kalman filter, which exploits the intrinsic smoothness of the 3D camera motion in traffic environments. Additionally, the estimation of the plane allows to correct deformations due to perspective, thus easing further sign classification.

Diseño e implementación de un módulo para la anotación de imágenes médicas

Se comenzó el trabajo recabando información sobre los distintos enfoques que se le había dado a la anotación a lo largo del tiempo, desde anotación de imágenes a mano, pasando por anotación de imágenes utilizando características de bajo nivel, como color y textura, hasta la anotación automática. Tras entrar en materia, se procedió a estudiar artículos relativos a los diferentes algoritmos utilizados para la anotación automática de imágenes. Dado que la anotación automática es un campo bastante abierto, hay un gran numero de enfoques. Teniendo las características de las imágenes en particular en las que se iba a centrar el proyecto, se fueron descartando los poco idoneos, bien por un coste computacional elevado, o porque estaba centrado en un tipo diferente de imágenes, entre otras cosas. Finalmente, se encontró un algoritmo basado en formas (Active Shape Model) que se consideró que podría funcionar adecuadamente. Básicamente, los diferentes objetos de la imagen son identicados a partir de un contorno base generado a partir de imágenes de muestra, siendo modicado automáticamente para cubrir la zona deseada. Dado que las imágenes usadas son todas muy similares en composición, se cree que puede funcionar bien. Se partió de una implementación del algoritmo programada en MATLAB. Para empezar, se obtuvieron una serie de radiografías del tórax ya anotadas. Las imágenes contenían datos de contorno para ambos pulmones, las dos clavículas y el corazón. El primer paso fue la creación de una serie de scripts en MATLAB que permitieran: - Leer y transformar las imágenes recibidas en RAW, para adaptarlas al tamaño y la posición de los contornos anotados - Leer los archivos de texto con los datos de los puntos del contorno y transformarlos en variables de MATLAB - Unir la imagen transformada con los puntos y guardarla en un formato que la implementación del algoritmo entendiera. Tras conseguir los ficheros necesarios, se procedió a crear un modelo para cada órgano utilizando para el entrenamiento una pequeña parte de las imágenes. El modelo obtenido se probó con varias imágenes de las restantes. Sin embargo, se encontro bastante variación dependiendo de la imagen utilizada y el órgano detectado. ---ABSTRACT---The project was started by procuring information about the diferent approaches to image annotation over time, from manual image anotation to automatic annotation. The next step was to study several articles about the diferent algorithms used for automatic image annotation. Given that automatic annotation is an open field, there is a great number of approaches. Taking into account the features of the images that would be used, the less suitable algorithms were rejected. Eventually, a shape-based algorithm (Active Shape Model) was found. Basically, the diferent objects in the image are identified from a base contour, which is generated from training images. Then this contour is automatically modified to cover the desired area. Given that all the images that would be used are similar in object placement, the algorithm would probably work nicely. The work started from a MATLAB implementation of the algorithm. To begin with, a set of chest radiographs already annotated were obtained. These images came with contour data for both lungs, both clavicles and the heart. The first step was the creation of a series of MATLAB scripts to join the RAW images with the annotation data and transform them into a format that the algorithm could read. After obtaining the necessary files, a model for each organ was created using part of the images for training. The trained model was tested on several of the reimaining images. However, there was much variation in the results from one image to another. Generally, lungs were detected pretty accurately, whereas clavicles and the heart gave more problems. To improve the method, a new model was trained using half of the available images. With this model, a significant inprovement of the results can be seen.

Diseño y ejecución de voladuras en la mina Aguablanca

Este proyecto tiene por objeto definir el diseño y ejecución de voladuras-tipo, que han sido llevadas a cabo en la mina Aguablanca (Badajoz),tanto de contorno como de producción. El diseño teórico de los diferentes parámetros (malla, consumo específico y cantidad de explosivo) necesarios para la ejecución de las voladuras se han llevado a cabo siguiendo la metodología de diferentes manuales sobre perforación y voladura y han sido ajustados a las necesidades reales del proyecto con el fin de mejorar los resultados de fragmentación, desplazamiento, esponjamiento y proyecciones de las voladuras. Los resultados obtenidos inicialmente en los cálculos teóricos de diseño de los distintos tipos de voladura no conducían a resultados óptimos. Para optimizar los resultados se han tenido que modificar algunos de los parámetros anteriormente mencionados. El Técnico debe tener capacidad para aplicar variaciones día a día que permitan mejorar los resultados obtenidos inicialmente en el cálculo teórico. ABSTRACT The project shows the design and implementation of contour and production blasts in the Mine Aguablanca (Badajoz, Spain). The explosive initial design of the blasts, including drilling pattern, powder factor and explosive charging pattern has been done following well known drilling and blasting calculations methods. As the initial theoretical values can lead to non-optimal results, the blast design has been modified by trial and error tests to achieve the desire rock fragmentation, swelling and minimize fly rocks. A good Blasting Technician must be able to adapt and modify, every day if needed, theoretical methodologies in order to cover the mining production necessitie.

A new approach for the glotis segmentation using Snakes

The present work describes a new methodology for the automatic detection of the glottal space from laryngeal images based on active contour models (snakes). In order to obtain an appropriate image for the use of snakes based techniques, the proposed algorithm combines a pre-processing stage including some traditional techniques (thresholding and median filter) with more sophisticated ones such as anisotropic filtering. The value selected for the thresholding was fixed to the 85% of the maximum peak of the image histogram, and the anisotropic filter permits to distinguish two intensity levels, one corresponding to the background and the other one to the foreground (glottis). The initialization carried out is based on the magnitude obtained using the Gradient Vector Flow field, ensuring an automatic process for the selection of the initial contour. The performance of the algorithm is tested using the Pratt coefficient and compared against a manual segmentation. The results obtained suggest that this method provided results comparable with other techniques such as the proposed in (Osma-Ruiz et al., 2008).

Accessibility instruments for planning practice: bridging the gap between academic research and decision-making.

One of the core objectives of urban planning practice is to provide spatial equity in terms of opportunities and use of public space and facilities. Accessibility is the element that serves this purpose as a concept linking the reciprocal relationship between transport and land use, thus shaping individual potential mobility to reach the desired destinations. Accessibility concepts are increasingly acknowledged as fundamental to understand the functioning of cities and urban regions. Indeed, by introducing them in planning practice, better solutions can be achieved in terms of spatial equity. The COST Action TU1002 "Accessibility instruments for planning practice" was specifically designed to address the gap between scientific research in measuring and modelling accessibility, and the current use of indicators of accessibility in urban planning practice. This paper shows the full process of introducing an easily understandable measure of accessibility to planning practitioners in Madrid, which is one of the case studies of the above-mentioned COST action. Changes in accessibility after the opening of a new metro line using contour measures were analyzed and then presented to a selection of urban planners and practitioners in Madrid as part of a workshop to evaluate the usefulness of this tool for planning practice. Isochrone maps were confirmed as an effective tool, as their utility can be supplemented by other indicators, and being GIS-based, it can be easily computed (when compared with transport models) and integrated with other datasets.

Quantitative analysis of morphological changes in yeast colonies growing on solid medium: the eccentricity and Fourier indices

The colony shape of four yeast species growing on agar medium wasmeasured for 116 days by image analysis. Initially, all the colonies are circular, with regular edges. The loss of circularity can be quantitatively estimated by the eccentricity index, Ei, calculated as the ratio between their orthogonal vertical and horizontal diameters. Ei can increase from 1 (complete circularity) to a maximum of 1.17–1.30, depending on the species. One colony inhibits its neighbour only when it has reached a threshold area. Then, Ei of the inhibited colony increases proportionally to the area of the inhibitory colony. The initial distance between colonies affects those threshold values but not the proportionality, Ei/area; this inhibition affects the shape but not the total surface of the colony. The appearance of irregularities in the edges is associated, in all the species, not with age but with nutrient exhaustion. The edge irregularity can be quantified by the Fourier index, Fi, calculated by the minimum number of Fourier coefficients that are needed to describe the colony contour with 99% fitness. An ad hoc function has been developed in Matlab v. 7.0 to automate the computation of the Fourier coefficients. In young colonies, Fi has a value between 2 (circumference) and 3 (ellipse). These values are maintained in mature colonies of Debaryomyces, but can reach values up to 14 in Saccharomyces.All the species studied showed the inhibition of growth in facing colony edges, but only three species showed edge irregularities associated with substrate exhaustion. Copyright © 2014 John Wiley & Sons, Ltd.

Paisaje de energías: conocimiento estético en el enfoque ambiental del proyecto

Desde hace ya varias décadas la praxis de la ecología ha venido reconociendo la necesidad de estudiar los múltiples sistemas de interacción del ser humano, como especie viva, y su entorno. Entidades espaciales como el paisaje geográfico son empleadas para delimitar sistemas territoriales operados por la sociedad, precisando campos concretos de su acción física, biológica y cultural. La ecología aborda así el conocimiento científico del territorio como asentamiento humano, rastrea sus patrones espaciales y analiza su compleja estructura funcional. En ese contexto, la transferencia de herramientas e instrumentos desde la ecología al ámbito proyectivo posee ya un bagaje de más de cinco décadas. Cada vez con más frecuencia el proyecto emplea parámetros, inventarios, fórmulas, indicadores y tecnologías que tratan de dar una respuesta ambientalmente adecuada a los condicionantes de contorno, por ejemplo aprovechando las condiciones climáticas en la optimización energética o proponiendo programas de usos del suelo que eviten perturbaciones en ecosistemas de interés. Con todo, en el momento presente surgen voces que, ante el dominio indiscutible de los enfoques netamente deterministas, tratan de recordar que los principios del pensamiento ecológico van más allá del mero control cuantitativo de los procesos biofísicos. Recuerdan que la etología demostró a principios del XX que el ser humano, como ser consciente, inviste una relación de intimidad con su entorno que supera tales perspectivas: a través de la correspondencia entre percepción y significación, entre lo físico y lo psíquico, entre interioridad y exterioridad, las personas abrazan la plenitud de aquello que les rodea en un acto de profunda conciliación afectiva. De tal ligadura de intimidad depende, sí o sí, y en toda su profundidad, la aceptación humana del entorno construido. A través de la noción de ambiente [Umwelt] se demuestra que la relación del hombre con su entorno es inseparable, bidireccional y coordinada y, por lo tanto, desde una posición coherente, la experiencia del espacio puede ser examinada a partir de la reciprocidad que constituyen, en continuidad, la persona y el lugar. De esta forma, la tesis dirige su objetivo principal a explorar y considerar, desde el proyecto, el significado y la influencia de la experiencia ambiental del espacio construido en la vida humana. Es más que probable que buena parte de los problemas de desafección del hombre con los paisajes transformados de su contemporaneidad tenga que ver con que tanto las intensidades de la experiencia y percepción humana, como la potestad interpretativa de sus productos culturales, incluyendo la arquitectura, han sido fuertemente reducidas. Ante este problema, la investigación toma como hipótesis la oportunidad que ofrece el pensamiento ecológico de reformular la experiencia estética como un acto de conocimiento, como un evento donde se da el encuentro físico y se construyen significados, donde se sancionan valores sociales y se mira hacia el futuro. Se ha de señalar que la presente tesis doctoral arranca en el Laboratorio de Paisaje del Grupo de Investigación Paisaje Cultural de la Universidad Politécnica de Madrid dirigido por Concha Lapayese y Darío Gazapo, y por tanto hace suyos para el estado del arte los principales conceptos e ideas bajo los que el trabajo teórico y práctico del grupo se viene orientando desde hace años: la consideración del paisaje como acontecimiento; la oscilación de la interpretación entre un paisaje específico y un paisaje genérico en un mundo globalizado; el reconocimiento de la experiencia estética del paisaje como una toma de conciencia social; y en definitiva, la reivindicación de la interioridad en el proyecto contemporáneo. La investigación profundiza en una línea de oportunidad que se abre al promover lo que se ha llamado un conocimiento por lo sentido como estrategia ambiental que permite contrarrestar mitos profundamente arraigados en las estructuras sociales. El primer paso en ese recorrido sería explorar ecológicamente el aporte de la experiencia estética; esto es, su consideración como forma de conocimiento específico. Resultaría pertinente impulsar la idea de la inmersión en el paisaje como fenómeno experiencial, sensual y corporal, y enfrentar, desde ahí, el problema de la aceptación social de lo nuevo y lo trasformado de acuerdo con el momento actual. La exploración sobre la afectividad en el ambiente no es, en cualquier caso, un asunto nuevo. Sin pretensiones de historiografía, dos momentos del siglo XX concentran el interés de la investigación. La primera se corresponde fundamentalmente con la segunda década del siglo, en relación a una serie de influencias que desde los avances científicos determinaron singulares aventuras del arte más experimental. La segunda se posiciona en el entorno de 1970, época en la que es conocido el interés que despertaron las cuestiones ambientales. En ambos casos se han estudiado aportaciones que desvelan conceptos determinantes en la definición de la experiencia estética como un evento de adquisición de conocimiento por lo sentido. Es conveniente adelantar el rol de centralidad que para la investigación tiene el concepto de energía, tal como el propio título subraya. La energía como realidad material y sensible es el sustrato que permite navegar por el principio de unidad epistemológica que subyace al pensamiento ecológico. Sus continuas referencias simbólicas, físicas y metafóricas entre los artistas estudiados no son un mero recurso iconográfico: mantienen inherente el principio de continuidad ambiental en el cual el ser humano y la inmensidad del cosmos navegan indisociables. Un discurso unificado y consistente sobre los aportes de la experiencia estética enfocada como forma de conocimiento por lo sentido hila la lectura histórica, conceptual y práctica de toda la investigación. Con ello se alcanza a hilvanar un diagrama conceptual, modelo de análisis proyectivo, que recoge ideas científicas, filosóficas y proyectivas. De alguna manera, el diagrama trata de dibujar, desde los principios del pensamiento ecológico, la correlación de continuidad que, vacilante, tensa, sutil y frágil se desplaza incesante e irresuelta entre interioridad y exterioridad. ABSTRACT Over the last few decades ecological practice has come to acknowledge a need for studying the multiple systems of interaction between the human being - inasmuch as it is a living species - and its environment. Spatial entities such as the geographic notion of landscape have been used to delimitate the territorial systems operated by society and to describe in detail specific fields of its physical, biological and cultural action. Ecology has thus managed to address the scientific knowledge of the territory as a human settlement, tracking its spatial patterns and analysing its complex functional structure. In this context, the transfer of tools and instruments from the field of ecology to that of design has a tradition already going back more than fifty years. Increasingly more often, design makes use of parameters, inventories, formulas, indicators and technologies to give an environmentally sound response to contour conditions: for instance, taking advantage of the local climate for the optimisation of energy consumption or proposing land uses that avoid disturbing valuable ecosystems. Yet in the present day some voices have arisen that, against the uncontested domination of purely positivistic approaches, are trying to draw attention to the fact that the principles of ecological thought go beyond mere quantitative control of biophysical processes. They point out that, in the early 20th century, ethology proved that the human being, as a conscious entity, invests itself into a relationship of intimacy with its environment that surpasses such perspectives: through the correspondences between perception and signification, between physical and psychological or between inside and outside, people embrace the entirety of their surroundings in an action of deep affective conciliation. It is on this link of intimacy that - fully and unquestionably - human acceptance of the built environment depends. Through the notion of environment [Umwelt] it can be proven that the relationship between the human being and its environment is inseparable, bidirectional and coordinated; and that, therefore, from a coherent position the experience of space can be examined through the reciprocity constituted continuously by person and place. Thus, the main goal in this thesis is to explore and acknowledge, from the standpoint of design, the meaning and influence of the environmental experience in human life. It is extremely likely that many of the issues with mankind’s alienation from the transformed landscapes of the present day arise from the fact that both the intensity of human perception and experience and the interpretive capacity of its cultural products –including architecture - have been greatly reduced. Facing this issue, research has taken as hypothesis the opportunity offered by ecological thought of reformulating aesthetic experience as an act of knowledge – as an event where physical encounter takes place and meanings are constructed; where social values are sanctioned and the path towards the future is drawn. This notwithstanding, the present thesis began in the Landscape Laboratory of the Technical University of Madrid Cultural Landscape Research Group (GIPC-UPM), led by Concha Lapayese and Darío Gazapo; and has therefore appropriated for its state of the art the main concepts and ideas that have been orienting the practical and theoretical work of the latter: the understanding of landscape as an event, the oscillation of interpretation between a specific and a generic landscape within a globalised world; the acknowledgement of the aesthetic experience of landscape as a way of acquiring social awareness; and, all in all, a vindication of interiority in contemporary design. An exploration has been made of the line of opportunity that is opened when promoting what has been termed knowledge through the senses as an environmental strategy allowing to counter myths deeply rooted in social structures. The first step in this path would be an ecological exploration of the contribution of the aesthetic experience; that is, its consideration as a type of specific knowledge. It would be pertinent to further the idea of immersion into the landscape as an experiential, sensual and corporeal phenomenon and, from that point, to face the issue of social acceptance of what is new and transformed according to the values of the present day. The exploration of affectivity in the environment is not, at any rate, a new topic. Without aspiring to make a history of it, we can mark two points in the 20th century that have concentrated the interest of this research. The first coincides with the second decade of the century and relates to a number of influences that, arising from scientific progress, determined the singular adventures of the more experimental tendencies in art. The second is centred around 1970: a period in which the interest drawn by environmental matters is well known. In both cases, contributions have been studied that reveal crucial concepts in defining the aesthetic experience as an event for the acquisition of knowledge through the senses. It is necessary to highlight the role of centrality that the concept of energy has throughout this research, as is evident even in its title. Energy as a material, sensitive reality is the substrate making it possible to navigate through the principle of epistemological unity underlying ecological thought. The continuous symbolic, physical and metaphorical references to it among the artists studied here are not a mere iconographic source: they remind of the inherency of the principle of environmental continuity within which the human being and the immensity of cosmos travel indissociably. A unified, consistent discourse on the contributions of the aesthetic experience addressed as knowledge through the senses weaves together the historic, conceptual and practical reading of the whole research. With it, a conceptual diagram is constructed – a model of design analysis – gathering together scientific, philosophical and design ideas. Somehow, the diagram tries to draw from the principles of ecological thought the correlation of continuity that, vacillating, tense, subtle and fragile, shifts incessantly and unresolved between interiority and exteriority.

Pulsiones del espacio : Oteiza y la aproximación a la arquitectura como vacío activo

Este trabajo se centra en el estudio de las investigaciones de Jorge Oteiza en torno a la funcionalidad estética del espacio, en especial, en la actividad artística que desarrolló en el año 1958, un año decisivo en la vida del escultor en el que dio por finalizado su proceso de experimentación sobre la naturaleza espacial de la estatua. En este desenlace tuvo un papel fundamental la relación funcional que planteó, a la hora de retomar su trabajo después de su triunfo en la IV Bienal de São Paulo de 1957, entre la escultura y la arquitectura. La primera, entendida como organismo puramente espacial, debía de responder a las condiciones de su mundo circundante, el espacio arquitectónico. Su función: acondicionarlo estéticamente para satisfacer las necesidades espirituales del habitante. Siguiendo el canon estético que para la escultura acababa de anunciar en Brasil, la desocupación espacial (la liberación de la energía espacial de la estatua, el rompimiento de la neutralidad del espacio libre) no se trataba de embellecer superficialmente la arquitectura sino de activar su vacío interior. Oteiza, que siempre estuvo muy interesado por la arquitectura y que había colaborado con anterioridad en numerosas ocasiones con los mejores arquitectos del país, fue durante este año cuando profundizó de manera más sistemática (teórica y prácticamente) sobre la relación arte-arquitectura. De hecho, él mismo nombraba como el último trabajo de su línea de experimentación en escultura a su propuesta para el concurso del Monumento a José Batlle en Montevideo, que junto al arquitecto Roberto Puig acabaron a finales de año. En el proyecto se planteaba a escala urbana, y como ejemplo concreto, el modelo teórico de integración arquitectura + (arte=0) que había elaborado los meses anteriores, la integración vacía. En el texto explicativo que acompañaba al proyecto (un texto que desbordaba los límites de una memoria al uso) demandaba la necesidad de la toma de conciencia estética del espacio, como acto de libertad individual, y declaraba el fin del rol de espectador del hombre frente a la obra de arte, reclamando su participación activa en la misma. Para él, la noción del espacio estético no era una condición innata en el hombre, se descubría, se aprendía, evolucionaba y se olvidaba (una vez convertido en hábito). Frente a la ceguera de la sensibilidad espacial del hombre, proponía la educación de la percepción espacial, condicionar emocionalmente la reflexión espontánea ante el juego espacial de las formas en la naturaleza y el espectáculo natural de la ciudad. Aprender a leer el lenguaje emocional del espacio, a pensar visualmente. La obra de arte era así un catalizador espiritual del contorno del mundo, modificador de la vida espacial circundante que corregía hábitos visuales y condicionaba estímulos y reflejos. Desde una resonancia afectiva con la definición psicológica del término (como energía psíquica profunda que invita o incita a pasar a la acción), a diferencia del instinto, la pulsión (siendo la fuente de toda conducta espontánea) es susceptible de ser modificada por la experiencia, por la educación, por la cultura, por el deseo. Es desde esta aproximación en términos de energía desde la que se propone la noción pulsiones del espacio como fórmula (reversible) entre la energía espacial liberada en el proceso de desocupación definido por Oteiza y caracterizadora de la obra como vacío activo (en escultura, en arquitectura), y la energía psíquica profunda que invita o incita a la toma de posesión del espacio (la voluntad espacial absoluta con la que Oteiza definía su modelo de arte=0, cero como expresión formal). Si el hombre modifica su entorno al mismo tiempo que es condicionado por él, es indispensable una conciencia estética del espacio que le enseñe, de entre todas las posibilidades que este le ofrece, qué es lo que necesita (qué es lo que le falta), para tomar posesión de él, para un efectivo ser o existir en el espacio. Es desde esta caracterización como energía por lo que las pulsiones del espacio se sitúan entre el hombre y su entorno (construido) y permiten la transformación entre energía espacial y energía psíquica; entre su hábitat y sus hábitos. Por estas mismas fechas, Oteiza definía una casa como un conjunto articulado de vacíos activos, como una obra de plástica pura que no es arte sino en función del habitante. Es este habitante, educado en la toma de conciencia estética del espacio, el que participando activamente en la interpretación de los espacios previstos por el arquitecto, sintiendo y movido por las pulsiones del espacio, hará uso adecuado de la arquitectura; pasando de un arte como objeto a un arte como comportamiento, transformará su habitar en un arte, el arte de habitar. ABSTRACT This work focuses on the study of Jorge Oteiza’s investigations on the aesthetic functionality of space, especially on his artistic activity developed in 1958, a decisive year in the life of the sculptor, in which he gave end to his process of experimentation on the spatial nature of the statue. In this outcome it was fundamental the functional relationship that he propounded, at the time of returning to work after his triumph in the IV Bienal de São Paulo in 1957, between sculpture and architecture. The first, understood as a purely spatial organism, should respond to the conditions of its environment (umwelt), the architectonic space. Its function: set it up aesthetically to meet the spiritual needs of the inhabitant. Following the aesthetic canon that he had just announced in Brazil for sculpture, the spatial disoccupation (the liberation of the spatial energy of the statue, the breaking of the neutrality of the free space) the aim was not to superficially beautify architecture but to activate its inner void. Oteiza, who had always been very interested in architecture and who had previously collaborated on numerous occasions with the best architects in the country, was in this year when he deepened in a more systematic way (theoretically and practically) about the art-architecture relationship. In fact, he named as the last work of his line of experimentation in sculpture to his proposal for the competition of the Monument to José Batlle in Montevideo, which, developed together with the architect Roberto Puig, was ended at the end of the year. The project proposed on an urban scale, and as a concrete example, the theoretical model of integration architecture + (art = 0) which he had elaborated the previous months, the empty integration. In the explanatory text accompanying the project (a text that exceeded the normal extents of a competition statement) he demanded the need of the aesthetic awareness of space, as an act of individual freedom, and it declared the end of the role of man as passive spectator in front of the work of art, claiming his actively participation in it. For him, the notion of the aesthetic space was not an inborn condition in man; first it was discovered, then learned, evolved and finally forgotten (once converted into a habit). To counteract blindness of the spatial sensitivity of man, he proposed the education of spatial perception, to emotionally influence the spontaneous reflection in front of the spatial game of forms in nature and the natural spectacle of the city. Learn to read the emotional language of space, to think visually. The work of art was thus a spiritual catalyst of the world’s contour, a modifier of the surrounding spatial life that corrected visual habits and conditioned stimuli and reflexes. From an emotional resonance with the psychological definition of the term (such as deep psychic power that invites or urges action), as opposed to instinct, drive (being the source of all spontaneous behavior) is likely to be modified by experience, by education, by culture, by desire. It is from this approach in terms of energy from which the notion drives of space is proposed, as a (reversible) formula between the spatial energy released in the process of disoccupation defined by Oteiza and characterizing of the work as a charged void (in sculpture, in architecture), and the deep psychic energy that invites or encourages the taking possession of the space (the absolute spatial will with which Oteiza defined its model of Art = 0, zero as a formal expression). If man changes his environment at the same time that is conditioned by it, it is essential an aesthetic awareness of space that shows him, among all the possibilities that it offers, what he needs (what is what he lacks), in order to take possession of it, for an effective being or existing in space. It is this characterization as energy by what drives of space lie between man and his (built) environment and allow the transformation between spatial and psychological energy; between his habitat and his habits. Around this same time, Oteiza defined a House as an articulated set of charged voids, as a work of pure plastic that is not art but according to the inhabitant. It is this inhabitant, educated in aesthetic awareness of space, who actively participating in the interpretation of the spaces provided by the architect, feeling and moved by the drives of the space, will make proper use of the architecture; from an art as object to an art as behavior, he will transform his inhabitation into an art, the art of inhabitation.