Computer-assisted two-dimensional preoperative planning for total hip arthroplasty: clinical evaluation.

The purpose of this study is to clinically validate a new two-dimensional preoperative planning software for cementless total hip arthroplasty (THA). Manual and two-dimensional computer-assisted planning were compared by an independent observer for each of the 30 patients with osteoarthritis who underwent THA. This study showed that there were no statistical differences between the results of both preoperative plans in terms of stem size and neck length (<1 size) and hip rotation center position (<5 mm). Two-dimensional computer-assisted preoperative planning provided successful results comparable to those using the manual procedure, thereby allowing the surgeon to simulate various stem designs easily.

Computer-aided volume measurement of posttraumatic orbits reconstructed with AO titanium mesh plates: accuracy and reliability

PURPOSE: To prospectively evaluate the accuracy and reliability of "freehand" posttraumatic orbital wall reconstruction with AO (Arbeitsgemeinschaft Osteosynthese) titanium mesh plates by using computer-aided volumetric measurement of the bony orbits. METHODS: Bony orbital volume was measured in 12 patients from coronal CT scan slices using OsiriX Medical Image software. After defining the volumetric limits of the orbit, the segmentation of the bony orbital region of interest of each single slice was performed. At the end of the segmentation process, all regions of interest were grouped and the volume was computed. The same procedure was performed on both orbits, and thereafter the volume of the contralateral uninjured orbit was used as a control for comparison. RESULTS: In all patients, the volume data of the reconstructed orbit fitted that of the contralateral uninjured orbit with accuracy to within 1.85 cm3 (7%). CONCLUSIONS: This preliminary study has demonstrated that posttraumatic orbital wall reconstruction using "freehand" bending and placement of AO titanium mesh plates results in a high success rate in re-establishing preoperative bony volume, which closely approximates that of the contralateral uninjured orbit.

Learning through Computer Model Improvisations

It has been convincingly argued that computer simulation modeling differs from traditional science. If we understand simulation modeling as a new way of doing science, the manner in which scientists learn about the world through models must also be considered differently. This article examines how researchers learn about environmental processes through computer simulation modeling. Suggesting a conceptual framework anchored in a performative philosophical approach, we examine two modeling projects undertaken by research teams in England, both aiming to inform flood risk management. One of the modeling teams operated in the research wing of a consultancy firm, the other were university scientists taking part in an interdisciplinary project experimenting with public engagement. We found that in the first context the use of standardized software was critical to the process of improvisation, the obstacles emerging in the process concerned data and were resolved through exploiting affordances for generating, organizing, and combining scientific information in new ways. In the second context, an environmental competency group, obstacles were related to the computer program and affordances emerged in the combination of experience-based knowledge with the scientists' skill enabling a reconfiguration of the mathematical structure of the model, allowing the group to learn about local flooding.

Object-oriented development of client / server application: case study of service control software

Tässä työssä on esitetty sen ohjelmiston kehittämisen prosessi, joka on tarkoitettu annettavien palveluiden valvottavaksi käyttäen prototyyppimallia. Raportti sisältää vaatimusten, kohteisiin suunnatun analyysin ja suunnittelun, realisointiprosessien kuvauksen ja prototyypin testauksen. Ohjelmiston käyttöala – antavien palveluiden valvonta. Vaatimukset sovellukselle analysoitiin ohjelmistomarkkinoiden perusteella sekä ohjelmiston engineeringin periaatteiden mukaisesti. Ohjelmiston prototyyppi on realisoitu käyttäen asiakas-/palvelinhybridimallia sekä ralaatiokantaa. Kehitetty ohjelmisto on tarkoitettu venäläisille tietokonekerhoille, jotka erikoistuvat pelipalvelinten antamiseen.

Business model design: an evaluation of paper-based and computer-aided canvases

In recent years, Business Model Canvas design has evolved from being a paper-based activity to one that involves the use of dedicated computer-aided business model design tools. We propose a set of guidelines to help design more coherent business models. When combined with functionalities offered by CAD tools, they show great potential to improve business model design as an ongoing activity. However, in order to create complex solutions, it is necessary to compare basic business model design tasks, using a CAD system over its paper-based counterpart. To this end, we carried out an experiment to measure user perceptions of both solutions. Performance was evaluated by applying our guidelines to both solutions and then carrying out a comparison of business model designs. Although CAD did not outperform paper-based design, the results are very encouraging for the future of computer-aided business model design.

Evolutionary computing in search-based software engineering

This master’s thesis aims to study and represent from literature how evolutionary algorithms are used to solve different search and optimisation problems in the area of software engineering. Evolutionary algorithms are methods, which imitate the natural evolution process. An artificial evolution process evaluates fitness of each individual, which are solution candidates. The next population of candidate solutions is formed by using the good properties of the current population by applying different mutation and crossover operations. Different kinds of evolutionary algorithm applications related to software engineering were searched in the literature. Applications were classified and represented. Also the necessary basics about evolutionary algorithms were presented. It was concluded, that majority of evolutionary algorithm applications related to software engineering were about software design or testing. For example, there were applications about classifying software production data, project scheduling, static task scheduling related to parallel computing, allocating modules to subsystems, N-version programming, test data generation and generating an integration test order. Many applications were experimental testing rather than ready for real production use. There were also some Computer Aided Software Engineering tools based on evolutionary algorithms.

Interface Implementation for GPRS/PCU Software Testing with Emulators

Jatkuvasti lisääntyvä matkapuhelinten käyttäjien määrä, internetin kehittyminen yleiseksi tiedon ja viihteen lähteeksi on luonut tarpeen palvelulle liikkuvan työaseman liittämiseksi tietokoneverkkoihin. GPRS on uusi teknologia, joka tarjoaa olemassa olevia matka- puhelinverkkoja (esim. NMT ja GSM) nopeamman, tehokkaamman ja taloudellisemman liitynnän pakettidataverkkoihin, kuten internettiin ja intranetteihin. Tämän työn tavoitteena oli toteuttaa GPRS:n paketinohjausyksikön (Packet Control Unit, PCU) testauksessa tarvittavat viestintäajurit työasemaympristöön. Aidot matkapuhelinverkot ovat liian kalliita, eikä niistä saa tarvittavasti lokitulostuksia, jotta niitä voisi käyttää GPRS:n testauksessa ohjelmiston kehityksen alkuvaihessa. Tämän takia PCU-ohjelmiston testaus suoritetaan joustavammassa ja helpommin hallittavassa ympäristössä, joka ei aseta kovia reaaliaikavaatimuksia. Uusi toimintaympäristö ja yhteysmedia vaativat PCU:n ja muiden GPRS-verkon yksiköiden välisistä yhteyksistä huolehtivien ohjelman osien, viestintäajurien uuden toteutuksen. Tämän työn tuloksena syntyivät tarvittavien viestintäajurien työasemaversiot. Työssä tarkastellaan eri tiedonsiirtotapoja ja -protokollia testattavan ohjelmiston vaateiden, toteutetun ajurin ja testauksen kannalta. Työssä esitellään kunkin ajurin toteuttama rajapinta ja toteutuksen aste, eli mitkä toiminnot on toteutettu ja mitä on jätetty pois. Ajureiden rakenne ja toiminta selvitetään siltä osin, kuin se on oleellista ohjelman toiminnan kannalta.

MRI/TRUS fusion software-based targeted biopsy: the new standard of care?

The advent of multiparametric MRI has made it possible to change the way in which prostate biopsy is done, allowing to direct biopsies to suspicious lesions rather than randomly. The subject of this review relates to a computer-assisted strategy, the MRI/US fusion software-based targeted biopsy, and to its performance compared to the other sampling methods. Different devices with different methods to register MR images to live TRUS are currently in use to allow software-based targeted biopsy. Main clinical indications of MRI/US fusion software-based targeted biopsy are re-biopsy in men with persistent suspicious of prostate cancer after first negative standard biopsy and the follow-up of patients under active surveillance. Some studies have compared MRI/US fusion software-based targeted versus standard biopsy. In men at risk with MRI-suspicious lesion, targeted biopsy consistently detects more men with clinically significant disease as compared to standard biopsy; some studies have also shown decreased detection of insignificant disease. Only two studies directly compared MRI/US fusion software-based targeted biopsy with MRI/US fusion visual targeted biopsy, and the diagnostic ability seems to be in favor of the software approach. To date, no study comparing software-based targeted biopsy against in-bore MRI biopsy is available. The new software-based targeted approach seems to have the characteristics to be added in the standard pathway for achieving accurate risk stratification. Once reproducibility and cost-effectiveness will be verified, the actual issue will be to determine whether MRI/TRUS fusion software-based targeted biopsy represents anadd-on test or a replacement to standard TRUS biopsy.

Validation of a computer-assisted system on classifying lower third molars

Objectives: The present study evaluates the reliability of the Radio Memory® software (Radio Memory; Belo Horizonte,Brasil.) on classifying lower third molars, analyzing intra- and interexaminer agreement of the results. Study Design: An observational, descriptive study of 280 lower third molars was made. The corresponding orthopantomographs were analyzed by two examiners using the Radio Memory® software. The exam was repeated 30 days after the first observation by each examiner. Both intra- and interexaminer agreement were determined using the SPSS v 12.0 software package for Windows (SPSS; Chicago, USA). Results: Intra- and interexaminer agreement was shown for both the Pell & Gregory and the Winter classifications, p<0.01, with 99% significant correlation between variables in all the cases. Conclusions: The use of Radio Memory® software for the classification of lower third molars is shown to be a valid alternative to the conventional method (direct evaluation on the orthopantomograph), for both clinical and investigational applications.

Utilización de software de corrección automática en el campo de las ciencias de la salud

We live in an era of profound changes in university education. The implementation of Bologna plan has led us to raise new teaching methodologies, to review the role of the student, competency assessment, the incorporation of ICT. Unthinkable acts, one or two decade ago. The TIC concept is very broad and is attributed to the media, processes and content usage. Inside the supports and platforms, we stress tools that allow automatic correction of exercises, because they are instruments of great educational value because instantly they assess students and provide instant feedback about the knowledge that they have either as message support or note. If the power of these tools, we add the Internet, using e-learning environment, the results allow us to work, edit, evaluate, resolve doubts, and so on, anywhere, anytime. We present part of a platform and the results of its use in the field of health sciences

Estudi de software lliure en diferents entorns

El software lliure està tenint últimament un pes cada cop més important en les empreses, però encara és el gran desconegut per a molta gent. Des de la seva creació als anys 80 fins ara, hi ha hagut un creixement exponencial de software lliure de gran qualitat, oferint eines per a tot tipus de necessitats, eines ofimàtiques, gestors de correu, sistemes de fitxer, sistemes operatius…. Tot aquest moviment no ha passat desapercebut per a molts usuaris i empreses, que s’han aprofitat d’ell per cobrir les seves necessitats. Pel que fa a les empreses, cada cop n’hi ha més que en petita o gran mesura, utilitzen el software lliure, ja sigui per el seu menor cost d’adquisició, o bé per la seva gran fiabilitat o per que és fàcilment adaptable o per no establir cap lligam tecnològic, en definitiva per tenir més llibertat. En el moment de la creació d’una nova empresa, on es parteix de zero en tota la tecnologia informàtica, és el moment menys costòs d’implementar l’arquitectura informàtica amb software lliure, és quan l’impacte que té sobre l’empresa, usuaris i clients és menor. En les empreses que ja tenen un sistema informàtic, caldrà establir un pla de migració, ja sigui total o parcial. La finalitat d’aquest projecte no és la de dir quin software és millor que l’altre o de dir quin s’ha d’instal•lar, sinó el de donar a conèixer el món del software lliure, mostrar part d’aquest software, fer alguna comparativa de software lliure amb software propietari, donant idees i un conjunt de solucions per a empreses, per què una empresa pugui agafar idees d’implementació d’algunes de les solucions informàtiques exposades o seguir algun dels consells proposats. Actualment ja hi ha moltes empreses que utilitzen software lliure. Algunes només n’utilitzen una petita part en les seves instal•lacions, ja que el fet de que una empresa funcioni al 100% amb software lliure, tot i que n’hi comença ha haver, de moment ho considero una mica arriscat, però que en poc temps, aquest fet serà cada cop més habitual.

Desenvolupament d'un sistema de transferència de software per una placa entrenadora

El departament d’electrònica i telecomunicacions de la Universitat de Vic ha dissenyat un conjunt de plaques entrenadores amb finalitat educativa. Perquè els alumnes puguin utilitzar aquestes plaques com a eina d’estudi, és necessari disposar d’un sistema de gravació econòmic i còmode. La major part dels programadors, en aquest cas, no compleixen amb aquests requeriments. L’objectiu d’aquest projecte és dissenyar un sistema de programació que utilitzi la comunicació sèrie i que no requereixi d'un hardware ni software específics. D’aquesta manera, obtenim una placa autònoma i un programador gratuït, de muntatge ràpid i simple d’utilitzar. El sistema de gravació dissenyat s’ha dividit en tres blocs. Per una banda, un programa que anomenem “programador” encarregat de transferir codi de programa des de l’ordinador al microcontrolador de la placa entrenadora. Per altra banda, un programa anomenat “bootloader”, situat al microcontrolador, permet rebre aquest codi de programa i emmagatzemar-lo a les direccions de memòria de programa corresponents. Com a tercer bloc, s’implementa un protocol de comunicació i un sistema de control d’errors per tal d’assegurar una correcta comunicació entre el “programador” i el “bootloader”. Els objectius d’aquest projecte s’han complert i per les proves realitzades, el sistema de programació ha funcionat correctament.

Polarímetro virtual: desenvolvimento, utilização e avaliação de um software educacional

Optical activity is the ability of chiral substances to rotate the plane of plane-polarized light and is measured using an instrument called a polarimeter. An educational software application to explore, both interactively and visually, the concepts related to polarimetry to facilitate their understanding was developed. The software was field-tested and a questionnaire evaluating the graphics interface, usability and the software as an educational tool, was answered by students. The results characterized the computer application developed as an auxiliary tool for assisting teachers in lectures and students in the learning process.

Ressonância: desenvolvimento, utilização e avaliação de um software educacional

Resonance is a useful concept that shows how electrons are shared between two or more atoms and allows a prediction of the chemical reactivity and relative stability of reagents, intermediates, and products. An educational software that enables interactive exploration of the concepts related to resonance and thereby facilitates its understanding was developed. The software was field-tested, and an evaluation questionnaire concerning the software as an educational tool was answered by the students and professors involved in the test. The results led to the conclusion that the developed computer application can be characterized as an auxiliary tool that assists teachers in their lectures and students in their learning process.

MODELING A COMPUTER APPLICATION FOR MANAGEMENT OF MAINTENANCE ACTIVITIES OF UNPAVED ROADS

ABSTRACTThis study presents a contribution to the modeling of a computer application employing a method of serviceability performance for unpaved roads, aiming the management of maintenance/restoration activities of the primary surface layer. The proposed methodology consisted of field inspections during dry (April to September) and rainy (October to March) periods, during which objective evaluations were performed to survey of defects and their densities and degrees of severity. To aid the functional classification of analyzed road sections and the determination of the defect with major influence on the serviceability of these roads, the method of serviceability performance proposed by Silva (2009)was implemented in the Visual Basic for Applications (VBA) language in Microsoft Excel software. With the use of the computer application proposed it was possible to identify among the defects analyzed in field, through the index of serviceability of the sampling unit per defect type (ISUdef), which one had the greatest influence on determining the relative serviceability index per road section (IST). The results allow us to conclude that the computer application Road achieved satisfactory results, since the objective evaluation criteria applied to road sections denotes consistency regarding their serviceability.