Modellizzazione bioeconomica per la gestione dei piccoli pelagici nel Mar Adriatico

Stocks’ overexploitation and socio-economic sustainability are two major issues currently at stake in European fisheries. In this view the European Commission is considering the implementation of management plans as a means to move towards a longer-term perspective on fisheries management, to consider regional differences and to increase stakeholder involvement. Adriatic small pelagic species (anchovies and sardines) are some of the most studied species in the world from a biologic perspective; several economic analysis have also been realised on Italian pelagic fishery; despite that, no complete bioeconomic modelization has been carried out yet considering all biologic, technical and economic issues. Bioeconomic models cannot be considered foolproof tools but are important implements to help decision makers and can supply a fundamental scientific basis for management plans. This research gathers all available information (from biologic, technologic and economic perspectives) in order to carry out a bioeconomic model of the Adriatic pelagic fishery. Different approaches are analyzed and some of them developed to highlight potential divergences in results, characteristics and implications. Growth, production and demand functions are estimated. A formal analysis about interaction and competition between Italian and Croatian fleet is examined proposing different equilibriums for open access, duopoly and a form of cooperative solution. Anyway normative judgments are limited because of poor knowledge of population dynamics and data related to the Croatian fleet.

Simulazione CAD dell'impingement articolare con protesi d'anca convenzionale e a conservazione di collo in funzione dei principali parametri chirurgici e anatomici

Lo scopo del lavoro è quello di verificare tramite software CAD l’influenza dei principali parametri chirurgici e anatomici sul Range Of Motion (ROM). Sono stati costruiti 5 modelli, uno di articolazione sana(Senza Protesi), uno di protesi Convenzionale e tre di protesi Conservative o a Conservazione (Totale, Media e Bassa Conservazione). Per tutti i modelli sono state simulate le rotazioni di base e i cosiddetti movimenti critici, ovvero quei movimenti a rischio di lussazione. Le prove sono state eseguite per teste da 28-,32-,36-,40mm di diametro, e con la coppa orientata di 45° in abduzione e 15° gradi in antiversione prima e successivamente di 45° e 0°. Inoltre, per verificare l’influenza dell’offset sul ROM, sono stati costruiti e simulati i movimenti per altri 5 modelli che non conservassero il vincolo del mantenere l’offset anatomico. Variando il diametro della testa si registrano differenze apprezzabili in termini di ROM solo per i movimenti di Estensione e Abduzione per il modello di Protesi Convenzionale e di Abduzione per il modello a Bassa Conservazione. Variando il livello di resezione del collo si è visto come per i modelli di protesi a Media Conservazione, Bassa Conservazione e Convenzionale si misurano angoli superiori a quello del riferimento tratto dalla Letteratura. Diversamente per il modello di Protesi a Totale Conservazione i valori ottenuti per alcuni movimenti sono inferiori, poiché limitati da un contatto di tipo c-b. Le simulazioni dei movimenti critici confermano la tendenza di un ROM accettabile per i modelli di protesi a Bassa Conservazione e di protesi Convenzionale, i quali forniscono escursioni angolari sempre superiori a quelle prese come riferimento dalla Letteratura. Invece, le protesi a Totale e Media Conservazione forniscono valori inferiori al riferimento per i movimenti di Pivot e Roll, essendo limitati dall’antiversione della coppa (movimenti di ExtraRotazione e contatto c-b). Variando la posizione della coppa a 45°/0° i due movimenti Critici Pivot e Roll migliorano per i modelli a Totale e Media Conservazione, tornando in linea con il riferimento. Riguardo l’offset si nota come più si avvicina a quello anatomico che misura 46,2mm (da 37 a 44mm), più si riscontra un aumento in termini di ROM.

Ruolo dei glicosaminoglicani su struttura e funzione dei crimps nei tendini e nei legamenti

The biomechanical roles of both tendons and ligaments are fulfilled by extracellular matrix of these tissues. In particular, tension is mainly transmitted and resisted by fibrous proteins (collagen, elastin), whereas compressive load is absorbed by water-soluble glycosaminoglycans (GAGs). GAGs spanning the interfibrillar spaces and interacting with fibrils also seem to play a part in transmitting and resisting tensile stresses. Apart from different functional roles and collagen array, tendons and ligaments share the same basic structure showing periodic undulations of collagen fibers or crimps. Each crimp is composed of many knots of each single fibril or fibrillar crimps. Fibrillar and fiber crimps act as shock absorbers during the initial elongation of both tendons and ligaments and assist the elastic recoil of fibrils and fibers when the tensile stress is removed. The aim of this thesis was to evaluate whether GAGs directly affect the 3D microstructural integrity of fibrillar crimp and fiber crimps in both tendons and ligaments. Achilles tendons and medial collateral ligaments of the knee from eight female Sprague-Dawley rats (90 days old) were digested with chondroitinase ABC to remove GAGs and observed under a scanning electron microscope (SEM). In addition, isolated fibrils from these tissues obtained by mechanical homogenization were analyzed by a transmission electron microscope (TEM). Both samples digested with chondroitinase ABC or mechanically disrupted still showed crimps and fibrillar crimps comparable to tissues with a normal GAGs content. All fibrils in the fibrillar crimp region always twisted leftwards, thus changing their running plane, and then sharply bent, changing their course on a new plane. These data suggest that GAGs do not affect structural integrity or fibrillar crimps functions that seem mainly related to the local fibril leftward twisting and the alternating handedness of collagen from a molecular to a supramolecular level.

Indicatori per la valutazione della presa in carico dei pazienti con disturbi mentali

Secondo la definizione dell’Organizzazione Mondiale della Sanità (OMS) “la salute mentale è la base per un corretto sviluppo emotivo, psicologico, intellettuale e sociale degli individui e allo stesso tempo ha effetti favorevoli sull’ambiente in cui le persone vivono e sul luogo di lavoro, generando crescita economica e sviluppo sociale”. In tutti i paesi la frequenza dei disturbi mentali è in aumento, con conseguente incremento dei costi sociali ed economici. Circa il 14 % della popolazione adulta a livello mondiale è colpita da un disturbo mentale o di comportamento, con picchi di oltre il 20% negli Stati Uniti. Negli ultimi anni le politiche sanitarie si sono orientate sempre più verso la ricerca di soluzioni per l’organizzazione dei servizi di salute mentale, favorendo un approccio territoriale piuttosto che ospedaliero, che ha portato in alcuni paesi ad una netta riduzione di posti letto riservati a malati psichiatrici. Fondamentale quindi l’istituzione di percorsi integrati che soddisfino i bisogni di salute mentale dei pazienti, garantiscano la continuità assistenziale e perseguano un miglioramento della qualità della vita dei pazienti e dei loro familiari. Obiettivo di questa tesi è la proposta di un set di indicatori per la salute mentale che avranno l’obiettivo di monitorare tutte le fasi del percorso assistenziale. A tale scopo, sarà necessario collegare i diversi flussi di informazioni: schede di dimissione ospedaliera, specialistica ambulatoriale, prestazioni farmaceutiche effettuate in distribuzione diretta o per conto, prestazioni dei dipartimenti di salute mentale, registro di mortalità, anagrafe.

Metodi biomolecolari per il follow up dei pazienti HIV positivi

As proviral human immunodeficiency virus type 1 (HIV-1) DNA can replenish and revive viral infection upon attivation, its analysis, in addition to RNA viral load, could be considered a useful marker during the follow-up of infected individuals, to evaluate reservoir status, especially in HAART-treated patients when RNA viral load is undetectable by current techniques and the antiretroviral efficacy of new, more potent therapeutic regimens. Standardized methods for the measurement of the two most significant forms of proviral DNA, total and non-integrated, are currently lacking, despite the widespread of molecular biology techniques. In this study, total and 2-LTR HIV-1 DNA proviral load, in addition to RNA viral load, CD4 cell count and serological parameters, were determined by quantitative analysis in peripheral blood mononuclear cells (PBMC) in naïve or subsequently HAART-treated patients with acute HIV-1 infection in order to establish the role of these two DNA proviral forms in the course of HIV infection. The study demonstrated that HAART-treated individuals show a significant decrease in both total and 2-LTR circular HIV-1 DNA proviral load compared with naïve patients: these findings confirm that HIV-1 reservoir decay correlates with therapeutic effectiveness. The persistence of small amounts of 2-LTR HIV-1 DNA form, which is considered to be a molecular determinant of infectivity, in PBMC from some patients demonstrates that a small rate of replication is retained even when HAART is substantially effective: HAART could not eradicate completely the infection because HIV is able to replicate at low levels. Plasma-based viral RNA assays may fail to demonstrate the full extent of viral activity. In conclusion, the availability of a new standardized assay to determine DNA proviral load will be important in assessing the true extent of virological suppression suggesting that its quantification may be an important parameter in monitoring HIV infection.

Studio di metodi di preparazione e caratterizzazione di nanostrutture per la funzionalizzazione di materiali ceramici

This thesis was carried out in the context of a co-tutoring program between Centro Ceramico Bologna (Italy) and Instituto di Tecnologia Ceramica, Castellón de la Plana (Spain). The subject of the thesis is the synthesis of silver nanoparticles and at their likely decorative application in the productive process of porcelain ceramic tiles. Silver nanoparticles were chosen as a case study, because metal nanoparticles are thermally stable, and they have non-linear optical properties when nano-structured, and therefore they develop saturated colours. The nanoparticles were synthesized by chemical reduction in aqueous solution, a method chosen because of its reduced working steps and energy costs. Besides such a synthesis method uses non-expensive and non-toxic raw material. By adopting this synthesis technique, it was also possible to control the dimension and the final shape of the nanoparticles. Several syntheses were carried out during the research work, modifying the molecular weight of the reducing agent and/or the firing temperature, in order to evaluate the influence such parameters have on the Ag-nanoparticles formation. The syntheses were monitored with the use of UV-Vis spectroscopy and the average dimension as well as the morphology of the nanoparticles was analysed by SEM. From the spectroscopic data obtained from each synthesis, a kinetic study was completed, relating the progress of the reaction to the two variables (ie temperature and molecular weight of the reducing agent). The aim was finding equations that allow the establishing of a relationship between the operating conditions during the synthesis and the characteristics of the final product. The next step was finding the best method of synthesis for the decorative application. For such a purpose the amount of nanoparticles, their average particle size, the shape and the agglomeration are considered. An aqueous suspension containing the nanoparticles is then sprayed over the fired ceramic tiles and they are subsequently thermally treated in conditions similar to the industrial one. The colorimetric parameters of the obtained ceramic tiles were studied and the method proved successful, giving the ceramic tiles stable and intense colours.

Salute e sicurezza sul lavoro: significati e problemi della valutazione dei rischi da stress lavoro-correlato nelle aziende sanitarie

Work environment changes bring new risks, in particular an increase in certain diseases and illnesses caused by stress. The European Agreement of October 2004 defines stress as “a state accompanied by physical, psychological or social dysfunctions, due to the fact that people do not feel able to overcome the gap in relation to requests or expectations for them”. A new strategy aims to reduce accidents and occupational illnesses through a series of actions at European level. The approaches to prevent work related stress must specifically aim to face up organizational and social aspects, to provide training to managers and employees on management of stress, to reduce the impact and to develop suitable systems for rehabilitation and return to work for those who suffered health problems. The enterprises will have to carry out the obligations laid down by legislation, adopting detection systems customised on their size and on their specific interests. Currently manifold tools and methodologies are proposed from different subjects as employer associations, advisors for safety, psychologists etc., but none of these has been identified as a model to follow. After the reconstruction of the theoretical framework where the theme is placed in, the thesis, through a background analysis done by collecting the comments of experts who are involved in the management of occupational safety and the examination of a concrete assessment of work-related stress risk, carried out at a local health authority of Emilia-Romagna region, aims to highlight the main sociological implications related to the emergence of these new risks.

Changes in tumor stiffness for early prediction of tumor response to sorafenib: a proof-of-concept study with elastosonography in an animal model of Hepatocellular Carcinoma (HCC)

Background and aims: Sorafenib is the reference therapy for advanced Hepatocellular Carcinoma (HCC). No method exists to predict in the very early period subsequent individual response. Starting from the clinical experience in humans that subcutaneous metastases may rapidly change consistency under sorafenib and that elastosonography a new ultrasound based technique allows assessment of tissue stiffness, we investigated the role of elastonography in the very early prediction of tumor response to sorafenib in a HCC animal model. Methods: HCC (Huh7 cells) subcutaneous xenografting in mice was utilized. Mice were randomized to vehicle or treatment with sorafenib when tumor size was 5-10 mm. Elastosonography (Mylab 70XVG, Esaote, Genova, Italy) of the whole tumor mass on a sagittal plane with a 10 MHz linear transducer was performed at different time points from treatment start (day 0, +2, +4, +7 and +14) until mice were sacrified (day +14), with the operator blind to treatment. In order to overcome variability in absolute elasticity measurement when assessing changes over time, values were expressed in arbitrary units as relative stiffness of the tumor tissue in comparison to the stiffness of a standard reference stand-off pad lying on the skin over the tumor. Results: Sor-treated mice showed a smaller tumor size increase at day +14 in comparison to vehicle-treated (tumor volume increase +192.76% vs +747.56%, p=0.06). Among Sor-treated tumors, 6 mice showed a better response to treatment than the other 4 (increase in volume +177% vs +553%, p=0.011). At day +2, median tumor elasticity increased in Sor-treated group (+6.69%, range –30.17-+58.51%), while decreased in the vehicle group (-3.19%, range –53.32-+37.94%) leading to a significant difference in absolute values (p=0.034). From this time point onward, elasticity decreased in both groups, with similar speed over time, not being statistically different anymore. In Sor-treated mice all 6 best responders at day 14 showed an increase in elasticity at day +2 (ranging from +3.30% to +58.51%) in comparison to baseline, whereas 3 of the 4 poorer responders showed a decrease. Interestingly, these 3 tumours showed elasticity values higher than responder tumours at day 0. Conclusions: Elastosonography appears a promising non-invasive new technique for the early prediction of HCC tumor response to sorafenib. Indeed, we proved that responder tumours are characterized by an early increase in elasticity. The possibility to distinguish a priori between responders and non responders based on the higher elasticity of the latter needs to be validated in ad-hoc experiments as well as a confirmation of our results in humans is warranted.

Metodologia di validazione dell'affidabilità e della sicurezza dei sistemi e prodotti industriali

Il rapido progresso della tecnologia, lo sviluppo di prodotti altamente sofisticati, la forte competizione globale e l’aumento delle aspettative dei clienti hanno messo nuove pressioni sui produttori per garantire la commercializzazione di beni caratterizzati da una qualità sempre crescente. Sono gli stessi clienti che da anni si aspettano di trovare sul mercato prodotti contraddistinti da un livello estremo di affidabilità e sicurezza. Tutti siamo consapevoli della necessità per un prodotto di essere quanto più sicuro ed affidabile possibile; ma, nonostante siano passati oramai 30 anni di studi e ricerche, quando cerchiamo di quantificare ingegneristicamente queste caratteristiche riconducibili genericamente al termine qualità, oppure quando vogliamo provare a calcolare i benefici concreti che l’attenzione a questi fattori quali affidabilità e sicurezza producono su un business, allora le discordanze restano forti. E le discordanze restano evidenti anche quando si tratta di definire quali siano gli “strumenti più idonei” da utilizzare per migliorare l’affidabilità e la sicurezza di un prodotto o processo. Sebbene lo stato dell’arte internazionale proponga un numero significativo di metodologie per il miglioramento della qualità, tutte in continuo perfezionamento, tuttavia molti di questi strumenti della “Total Quality” non sono concretamente applicabili nella maggior parte delle realtà industriale da noi incontrate. La non applicabilità di queste tecniche non riguarda solo la dimensione più limitata delle aziende italiane rispetto a quelle americane e giapponesi dove sono nati e stati sviluppati questi strumenti, oppure alla poca possibilità di effettuare investimenti massicci in R&D, ma è collegata anche alla difficoltà che una azienda italiana avrebbe di sfruttare opportunamente i risultati sui propri territori e propri mercati. Questo lavoro si propone di sviluppare una metodologia semplice e organica per stimare i livelli di affidabilità e di sicurezza raggiunti dai sistemi produttivi e dai prodotti industriali. Si pone inoltre di andare al di là del semplice sviluppo di una metodologia teorica, per quanto rigorosa e completa, ma di applicare in forma integrata alcuni dei suoi strumenti a casi concreti di elevata valenza industriale. Questa metodologia come anche, più in generale, tutti gli strumenti di miglioramento di affidabilità qui presentati, interessano potenzialmente una vasta gamma di campi produttivi, ma si prestano con particolare efficacia in quei settori dove coesistono elevate produzioni e fortissime esigenze qualitative dei prodotti. Di conseguenza, per la validazione ed applicazione ci si è rivolti al settore dell’automotive, che da sempre risulta particolarmente sensibile ai problemi di miglioramento di affidabilità e sicurezza. Questa scelta ha portato a conclusioni la cui validità va al di là di valori puramente tecnici, per toccare aspetti non secondari di “spendibilità” sul mercato dei risultati ed ha investito aziende di primissimo piano sul panorama industriale italiano.

Il conflitto tra libertà del mercato interno comunitario e diritti fondamentali nel diritto dell'Unione Europea: la posizione della Corte di Giustizia di Lussemburgo quale garante dei diritti fondamentali

Come indica il titolo, questa ricerca studia il conflitto tra libertà fondamentali del mercato interno dell’Unione europea e dei diritti fondamentali e la posizione della Corte in quanto garante dei diritti nella risoluzione di tali conflitti. La Trattazione considera non solo la Giurisprudenza della Corte di Giustizia, che risolve i conflitti tra libertà del mercato e diritti fondamentali; ma anche l'ordinamento europeo, e il suo rapporto con il diritto nazionale, considerando anche la giurisprudenza delle corti costituzionali e supreme degli Stati membri. L’analisi è svolta in una introduzione; in tre capitoli (Capitolo 1, “Integrazione economica e protezzione dei diritti fondamentali”; Capitlo 2, “Conflitto tra libertà fondamentali di mercato e diritti fondamentali”; Capitolo 3, “La tutela dei diritti fondamentali negli stati membri come limiti all’integrazione europea”) e nelle successive conclusioni.

Detailed study of the seismotectonic setting in the Lucanian Apennines and surrounding areas (Southern Italy)

In this research work I analyzed the instrumental seismicity of Southern Italy in the area including the Lucanian Apennines and Bradano foredeep, making use of the most recent seismological database available so far. I examined the seismicity occurred during the period between 2001 and 2006, considering 514 events with magnitudes M ≥ 2.0. In the first part of the work, P- and S-wave arrival times, recorded by the Italian National Seismic Network (RSNC) operated by the Istituto Nazionale di Geofisica e Vulcanologia (INGV), were re-picked along with those of the SAPTEX temporary array (2001–2004). For some events located in the Upper Val d'Agri, I also used data from the Eni-Agip oil company seismic network. I computed the VP/VS ratio obtaining a value of 1.83 and I carried out an analysis for the one-dimensional (1D) velocity model that approximates the seismic structure of the study area. After this preliminary analysis, making use of the records obtained in the SeSCAL experiment, I incremented the database by handpicking new arrival times. My final dataset consists of 15,666 P- and 9228 S-arrival times associated to 1047 earthquakes with magnitude ML ≥ 1.5. I computed 162 fault-plane solutions and composite focal mechanisms for closely located events. I investigated stress field orientation inverting focal mechanism belonging to the Lucanian Apennine and the Pollino Range, both areas characterized by more concentrated background seismicity. Moreover, I applied the double difference technique (DD) to improve the earthquake locations. Considering these results and different datasets available in the literature, I carried out a detailed analysis of single sub-areas and of a swarm (November 2008) recorded by SeSCAL array. The relocated seismicity appears more concentrated within the upper crust and it is mostly clustered along the Lucanian Apennine chain. In particular, two well-defined clusters were located in the Potentino and in the Abriola-Pietrapertosa sector (central Lucanian region). Their hypocentral depths are slightly deeper than those observed beneath the chain. I suggest that these two seismic features are representative of the transition from the inner portion of the chain with NE-SW extension to the external margin characterized by dextral strike-slip kinematics. In the easternmost part of the study area, below the Bradano foredeep and the Apulia foreland, the seismicity is generally deeper and more scattered and is associated to the Murge uplift and to the small structures present in the area. I also observed a small structure NE-SW oriented in the Abriola-Pietrapertosa area (activated with a swarm in November 2008) that could be considered to act as a barrier to the propagation of a potential rupture of an active NW-SE striking faults system. Focal mechanisms computed in this study are in large part normal and strike-slip solutions and their tensional axes (T-axes) have a generalized NE-SW orientation. Thanks to denser coverage of seismic stations and the detailed analysis, this study is a further contribution to the comprehension of the seismogenesis and state of stress of the Southern Apennines region, giving important contributions to seismotectonic zoning and seismic hazard assessment.