Potassium fertilization for pineapple: effects on soil chemical properties and plant nutrition

A field experiment was carried out on an Ultisol located at the city of Agudos (22º30'S; 49º03'W), in the state of São Paulo, Brazil, in order to determine the effects of rates and sources of potassium fertilizer on nutritional status of 'Smooth Cayenne' pineapple and on some soil chemical properties. The experiment was a complete factorial design with four rates (0, 175, 350, and 700 kg ha-1 of K2O) and three combinations of K sources (100% KCl, 100% K2SO4 and 40% K2SO4 + 60% KCl). Soil samples were taken from the depths 0-20 cm, 20-40 cm and 40-60 cm at planting and 14 months after. Nutritional status of pineapple plants was assessed by means of tissue analysis. Soil K availability increased with application of K fertilizer, regardless of K sources. Soil chlorine and Cl concentration in pineapple leaves increased with application of KCl or K2SO4+KCl. Plant uptake of potassium was shaped by soil K availability and by the application rates of K fertilizer, independently of K sources.

Spectroscopic ellipsometry study of the In1-x Gax Asy P1-y / InP Heterojunctions grown by metalorganic chemical-vapor deposition

The dielectric functions of InP, In0.53Ga0.47As, and In0.75Ga0.25As0.5P0.5 epitaxial layers have been measured using a polarization modulation spectroscopic ellipsometer in the 1.5 to 5.3 eV region. The oxide removal procedure has been carefully checked by comparing spectroscopic ellipsometry and x ray photoelectron spectroscopy measurements. These reference data have been used to investigate the structural nature of metalorganic chemical vapor deposition grown In0.53Ga0.47As/InP and In0.75Ga0.25As0.5P0.5/InP heterojunctions, currently used for photodiodes and laser diodes. The sharpness of the interfaces has been systematically compared for the two types of heterojunctions: In1 xGaxAsy/InP and InP/In1 xGaxAsyP1 y. The sharpest interface is obtained for InP growth on In0.75Ga0.25As0.5P0.5 where the interface region is estimated to be (10±10) Å thick. The importance of performing in situ SE measurements is emphasized.

The Classification of Vitreous Seeds in Retinoblastoma and Response to Intravitreal Melphalan.

PURPOSE: To evaluate the clinical characteristics of the 3 classifications of vitreous seeds in retinoblastoma-dust (class 1), spheres (class 2), and clouds (class 3)-and their responses to intravitreal melphalan. DESIGN: Retrospective, bi-institutional cohort study. PARTICIPANTS: A total of 87 patient eyes received 475 intravitreal injections of melphalan (median dose, 30 μg) given weekly, a median of 5 times (range, 1-12 times). METHODS: At presentation, the vitreous seeds were classified into 3 groups: dust, spheres, and clouds. Indirect ophthalmoscopy, fundus photography, ultrasonography, and ultrasonic biomicroscopy were used to evaluate clinical response to weekly intravitreal melphalan injections and time to regression of vitreous seeds. Kaplan-Meier estimates of time to regression and ocular survival, patient survival, and event-free survival (EFS) were calculated and then compared using the Mantel-Cox test of curve. MAIN OUTCOME MEASURES: Time to regression of vitreous seeds, patient survival, ocular survival, and EFS. RESULTS: The difference in time to regression was significantly different for the 3 seed classes (P < 0.0001): the median time to regression was 0.6, 1.7, and 7.7 months for dust, spheres, and clouds, respectively. Eyes with dust received significantly fewer injections and a lower median and cumulative dose of melphalan, whereas eyes with clouds received significantly more injections and a higher median and cumulative dose of melphalan. Overall, the 2-year Kaplan-Meier estimates for ocular survival, patient survival, and EFS (related to target seeds) were 90.4% (95% confidence interval [CI], 79.7-95.6), 100%, and 98.5% (95% CI, 90-99.7), respectively. CONCLUSIONS: The regression and response of vitreous seeds to intravitreal melphalan are different for each seed classification. The vitreous seed classification can be predictive of time to regression, number, median dose, and cumulative dose of intravitreal melphalan injections required.

Genotypic classification of patients with Wolfram syndrome: insights into the natural history of the disease and correlation with phenotype

Purpose: Wolfram syndrome is a degenerative, recessive rare disease with an onset in childhood. It is caused by mutations in WFS1 or CISD2 genes. More than 200 different variations in WFS1 have been described in patients with Wolfram syndrome, which complicates the establishment of clear genotype-phenotype correlation. The purpose of this study was to elucidate the role of WFS1 mutations and update the natural history of the disease. Methods: This study analyzed clinical and genetic data of 412 patients with Wolfram syndrome published in the last 15 years. Results: (i) 15% of published patients do not fulfill the current ­inclusion criterion; (ii) genotypic prevalence differences may exist among countries; (iii) diabetes mellitus and optic atrophy might not be the first two clinical features in some patients; (iv) mutations are nonuniformly distributed in WFS1; (v) age at onset of diabetes mellitus, hearing defects, and diabetes insipidus may depend on the patient"s genotypic class; and (vi) disease progression rate might depend on genotypic class. Conclusion: New genotype-phenotype correlations were established, disease progression rate for the general population and for the genotypic classes has been calculated, and new diagnostic criteria have been proposed. The conclusions raised could be important for patient management and counseling as well as for the development of treatments for Wolfram syndrome.

Classification-Based compression of Multispectral Images

The purpose of this thesis is to present a new approach to the lossy compression of multispectral images. Proposed algorithm is based on combination of quantization and clustering. Clustering was investigated for compression of the spatial dimension and the vector quantization was applied for spectral dimension compression. Presenting algo¬rithms proposes to compress multispectral images in two stages. During the first stage we define the classes' etalons, another words to each uniform areas are located inside the image the number of class is given. And if there are the pixels are not yet assigned to some of the clusters then it doing during the second; pass and assign to the closest eta¬lons. Finally a compressed image is represented with a flat index image pointing to a codebook with etalons. The decompression stage is instant too. The proposed method described in this paper has been tested on different satellite multispectral images from different resources. The numerical results and illustrative examples of the method are represented too.

Motorcycle helmets: what about their coating?

In traffic accidents involving motorcycles, paint traces can be transferred from the rider's helmet or smeared onto its surface. These traces are usually in the form of chips or smears and are frequently collected for comparison purposes. This research investigates the physical and chemical characteristics of the coatings found on motorcycles helmets. An evaluation of the similarities between helmet and automotive coating systems was also performed.Twenty-seven helmet coatings from 15 different brands and 22 models were considered. One sample per helmet was collected and observed using optical microscopy. FTIR spectroscopy was then used and seven replicate measurements per layer were carried out to study the variability of each coating system (intravariability). Principal Component Analysis (PCA) and Hierarchical Cluster Analysis (HCA) were also performed on the infrared spectra of the clearcoats and basecoats of the data set. The most common systems were composed of two or three layers, consistently involving a clearcoat and basecoat. The coating systems of helmets with composite shells systematically contained a minimum of three layers. FTIR spectroscopy results showed that acrylic urethane and alkyd urethane were the most frequent binders used for clearcoats and basecoats. A high proportion of the coatings were differentiated (more than 95%) based on microscopic examinations. The chemical and physical characteristics of the coatings allowed the differentiation of all but one pair of helmets of the same brand, model and color. Chemometrics (PCA and HCA) corroborated classification based on visual comparisons of the spectra and allowed the study of the whole data set at once (i.e., all spectra of the same layer). Thus, the intravariability of each helmet and its proximity to the others (intervariability) could be more readily assessed. It was also possible to determine the most discriminative chemical variables based on the study of the PCA loadings. Chemometrics could therefore be used as a complementary decision-making tool when many spectra and replicates have to be taken into account. Similarities between automotive and helmet coating systems were highlighted, in particular with regard to automotive coating systems on plastic substrates (microscopy and FTIR). However, the primer layer of helmet coatings was shown to differ from the automotive primer. If the paint trace contains this layer, the risk of misclassification (i.e., helmet versus vehicle) is reduced. Nevertheless, a paint examiner should pay close attention to these similarities when analyzing paint traces, especially regarding smears or paint chips presenting an incomplete layer system.

Use of the dried blood spot sampling process coupled with fast gas chromatography and negative-ion chemical ionization tandem mass spectrometry: application to fluoxetine, norfluoxetine, reboxetine, and paroxetine analysis.

The objective of this work was to combine the advantages of the dried blood spot (DBS) sampling process with the highly sensitive and selective negative-ion chemical ionization tandem mass spectrometry (NICI-MS-MS) to analyze for recent antidepressants including fluoxetine, norfluoxetine, reboxetine, and paroxetine from micro whole blood samples (i.e., 10 microL). Before analysis, DBS samples were punched out, and antidepressants were simultaneously extracted and derivatized in a single step by use of pentafluoropropionic acid anhydride and 0.02% triethylamine in butyl chloride for 30 min at 60 degrees C under ultrasonication. Derivatives were then separated on a gas chromatograph coupled with a triple-quadrupole mass spectrometer operating in negative selected reaction monitoring mode for a total run time of 5 min. To establish the validity of the method, trueness, precision, and selectivity were determined on the basis of the guidelines of the "Société Française des Sciences et des Techniques Pharmaceutiques" (SFSTP). The assay was found to be linear in the concentration ranges 1 to 500 ng mL(-1) for fluoxetine and norfluoxetine and 20 to 500 ng mL(-1) for reboxetine and paroxetine. Despite the small sampling volume, the limit of detection was estimated at 20 pg mL(-1) for all the analytes. The stability of DBS was also evaluated at -20 degrees C, 4 degrees C, 25 degrees C, and 40 degrees C for up to 30 days. Furthermore, the method was successfully applied to a pharmacokinetic investigation performed on a healthy volunteer after oral administration of a single 40-mg dose of fluoxetine. Thus, this validated DBS method combines an extractive-derivative single step with a fast and sensitive GC-NICI-MS-MS technique. Using microliter blood samples, this procedure offers a patient-friendly tool in many biomedical fields such as checking treatment adherence, therapeutic drug monitoring, toxicological analyses, or pharmacokinetic studies.

Työturvallisuus- ja työterveysriskien arviointi Vianor Oy:ssä

Tämän diplomityön tavoitteena oli kehittää Vianor Oy:lle soveltuva työterveys- ja työturvallisuusriskien arviointimalli ja sen jälkeen tehdä se viidessä toimipaikassa. Tämän lisäksi selvitettiin kaikki käytössä olevat kemikaalit sekä arvioitiin niiden käytön terveys-, turvallisuus-, ja ympäristövaikutuksia käyttöturvallisuustiedotteiden tietojen perusteella. Aluksi tutustuttiin rengasalaan liittyviin vaaroihin kirjallisuuden ja aikaisemmin sattuneiden tapaturmien avulla. Tämän jälkeen tutustuttiin työterveys- ja työturvallisuusriskien arvioinnin periaatteisiin sekä jo olemassa oleviin menetelmiin. Näiden perusteella laadittiin Vianor Oy:lle soveltuva riskien arviointimalli. Kemikaalien osalta tutustuttiin kemikaalien terveys-, turvallisuus- ja ympäristövaaroihin. Tämän jälkeen tehtiin malli, jonka avulla kemikaalit voidaan luokitella vaarallisuuden mukaan käyttöturvallisuustiedotteiden tietojen avulla. Toimipaikkoja pyydettiin selvittämään kaikki käytössä olevat kemikaalit. Toimipaikkojen käytössä olevien kemikaalien valikoimaa yhtenäistettiin ja kemikaalien käyttöturvallisuustiedotteet siirrettiin sisäiseen intranettiin. Lopuksi laadittiin joidenkin työterveys- ja työturvallisuusriskien hallitsemiseksi menettelytapoja ja mietittiin toimenpiteitä työturvallisuuden jatkuvalle parantamiselle. Työterveys- ja työturvallisuusriskien arviointi päätettiin käyttää yhtenä työturvallisuuden kehittämisen välineen ja tehdä se jokaisessa Vianor Oy:n toimipaikassa. Joidenkin kemikaalien osalta suoritetaan tarkempi vaaranarviointi.

A survey of transposable element classification systems--a call for a fundamental update to meet the challenge of their diversity and complexity.

The increase of publicly available sequencing data has allowed for rapid progress in our understanding of genome composition. As new information becomes available we should constantly be updating and reanalyzing existing and newly acquired data. In this report we focus on transposable elements (TEs) which make up a significant portion of nearly all sequenced genomes. Our ability to accurately identify and classify these sequences is critical to understanding their impact on host genomes. At the same time, as we demonstrate in this report, problems with existing classification schemes have led to significant misunderstandings of the evolution of both TE sequences and their host genomes. In a pioneering publication Finnegan (1989) proposed classifying all TE sequences into two classes based on transposition mechanisms and structural features: the retrotransposons (class I) and the DNA transposons (class II). We have retraced how ideas regarding TE classification and annotation in both prokaryotic and eukaryotic scientific communities have changed over time. This has led us to observe that: (1) a number of TEs have convergent structural features and/or transposition mechanisms that have led to misleading conclusions regarding their classification, (2) the evolution of TEs is similar to that of viruses by having several unrelated origins, (3) there might be at least 8 classes and 12 orders of TEs including 10 novel orders. In an effort to address these classification issues we propose: (1) the outline of a universal TE classification, (2) a set of methods and classification rules that could be used by all scientific communities involved in the study of TEs, and (3) a 5-year schedule for the establishment of an International Committee for Taxonomy of Transposable Elements (ICTTE).

Chemical, physico-chemical and sensory characterization of mixed açai (Euterpe oleracea) and cocoa´s honey (Theobroma cacao) jellies

Four formulations of mixed açaí (Euterpe oleracea) (A) and cocoa´s honey (Theobroma cacao) (CH) jellies were prepared according to the following proportions: T1 (40% A:60% CH), T2 (50% A:50% CH), T3 (60% A: 40% CH) and T4 (100% A - control). All formulations were prepared using a rate 60:40 (w/w) of sucrose and pulp, plus 0.5% pectin and the products reached to average of 65% soluble solids content. The jellies were analyzed by chemical and physicochemical (titratable acidity, pH, soluble solid content, dry matter, total protein, lipids, vitamin C and calories) and sensory characteristics; also were evaluated levels of P, K, Ca, Mg, Fe, Zn, Cu and Mn. It was used a hedonic scale of 7 points to evaluate the attributes: overall impression, spreadability, brightness, flavor, texture and color, and also was verified the purchase intention score. The titratable acidity and pH ranged from 0.46 to 0.64% and 3.35 to 3.64, respectively, that are within the range found at most fruit jellies. The soluble solids content ranged between 65.2 and 65.5 ºBrix. The sensory acceptance results showed that all treatments (T1, T2, T3 and T4) presented means of sensory attributes above 4, demonstrating good acceptance of the product, but the treatment T1 presented the higher scores for the evaluated attributes. Cocoa´s honey added a positive influence on the attributes of color, texture and spreadability.

Text Classification and Indexing in IP Networks

Internet on elektronisen postin perusrakenne ja ollut tärkeä tiedonlähde akateemisille käyttäjille jo pitkään. Siitä on tullut merkittävä tietolähde kaupallisille yrityksille niiden pyrkiessä pitämään yhteyttä asiakkaisiinsa ja seuraamaan kilpailijoitansa. WWW:n kasvu sekä määrällisesti että sen moninaisuus on luonut kasvavan kysynnän kehittyneille tiedonhallintapalveluille. Tällaisia palveluja ovet ryhmittely ja luokittelu, tiedon löytäminen ja suodattaminen sekä lähteiden käytön personointi ja seuranta. Vaikka WWW:stä saatavan tieteellisen ja kaupallisesti arvokkaan tiedon määrä on huomattavasti kasvanut viime vuosina sen etsiminen ja löytyminen on edelleen tavanomaisen Internet hakukoneen varassa. Tietojen hakuun kohdistuvien kasvavien ja muuttuvien tarpeiden tyydyttämisestä on tullut monimutkainen tehtävä Internet hakukoneille. Luokittelu ja indeksointi ovat merkittävä osa luotettavan ja täsmällisen tiedon etsimisessä ja löytämisessä. Tämä diplomityö esittelee luokittelussa ja indeksoinnissa käytettävät yleisimmät menetelmät ja niitä käyttäviä sovelluksia ja projekteja, joissa tiedon hakuun liittyvät ongelmat on pyritty ratkaisemaan.

Repeatability, correlation and path analysis of physical and chemical characteristics of peach fruits

This study aimed to determine the number of measurements necessary to evaluate physical and chemical characteristics of peach fruits, study the relationships between them and their direct and indirect effects on the content of ascorbic acid and total carotenoids. The characteristics skin and pulp color, fruit weight, suture, equatorial and polar diameters, firmness, soluble solids (SS), titratable acidity (TA), SS/TA ratio, ascorbic acid and total carotenoids were evaluated in 39 cultivars of peach and 3 cultivars of nectarine from the orchard of the Universidade Federal de Viçosa. The repeatability coefficient was estimated by ANOVA and CPCOR. Phenotypic correlation coefficients (rf) were estimated and, after the multicollinearity diagnostics, they were unfolded to direct and indirect effects of the explanatory variables on the response variable using path analysis. There was agreement on the magnitude of repeatability coefficients obtained by the two methods; however, they varied among the 14 characteristics. The highest correlations were found between FW, SD, ED and PD. Seven fruits are sufficient to evaluate the physical and chemical characteristics of peach with a correlation coefficient of 90%. The characteristics considered in the path diagrams (b* skin, hº skin, b* pulp, hº pulp, ED, PD, FIR, SS, SS/AT and TC) are not the main determinants of the ascorbic acid. The yellow hue of the pulp (hº pulp) has the potential to be used in indirect selection for total carotenoids.