Potencial dos solos do Município de Nazaré da Mata (PE) para a cultura de cana-de-açúcar (Saccharum officinarum L.), no manejo com alta tecnologia.

2013

Desenvolvimento de pastas leves utilizando incorporadores de ar para aplicação em poços de petróleo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Integração Lavoura-Pecuária em solo arenoso e clima quente: duas décadas de experiência.

Algumas características da região e da propriedade. Duas décadas de integração lavoura-pecuária: algumas percepções. O modelo de SILP usado na propriedade. Alguns resultados da propriedade. Identificação de alguns desafios do SILP.

Estudo da formulação de pré-misturas secas para a cimentação de poços em terra

An economical solution for cementing oil wells is the use of pre-prepared dry mixtures containing cement and additives. The mixtures may be formulated, prepared and transported to the well where is added water to be pumped.Using this method, becomes dispensable to prepare the cement mixes containing additives in the cementing operation, reducing the possibility of error. In this way, the aim of this work is to study formulations of cement slurries containing solid additives for primary cementing of oil wells onshore for typical depths of 400, 800 and 1,200 meters. The formulations are comprised of Special Class Portland cement, mineral additions and solids chemical additives.The formulated mixtures have density of 1.67 g / cm ³ (14.0 lb / gal). Their optimization were made through the analysis of the rheological parameters, fluid loss results, free water, thickening time, stability test and mechanical properties.The results showed that mixtures are in conformity the specifications for cementing oil wells onshore studied depths

Efeito da adição de microfibras de lã de vidro na tenacidade à ruptura de pastas de cimento para poços de petróleo

Although there are a wide variety of additives that act in fresh state, to adjust the properties of cement, there is also a search by additions that improve the tenacity of the cement in the hardened state. This, in turn, can often be increased by inserting fibers, which act on the deflection of microcracks. This study aimed to use a microfiber glass wool (silica-based) as an additive reinforcing the cement matrix, improving the rupture tenacity, in order to prevent the propagation of microcracks in the cement sheath commonly found in oil wells submitted to high temperatures. The fibers were added at different concentrations, 2 to 5% (BWOC) and varied average sizes, grinding for 90 s, 180 s, 300 s, 600 s. The cement slurries were made with a density of 1,90 g/ cm3 (15,6 lb/gal), using Portland cement CPP- Special Class as the hydraulic binder and 40% silica flour. The characterization of the fiber was made by scanning electron microscopy (SEM), particle size by sieving, X-ray fluorescence (XRF), X-ray diffraction (XRD) and thermogravimetry (TG / DTG). Were performed technological tests set by the API (American Petroleum Institute) by rheology, stability, free water, compressive strength, as well as testing rupture energy, elastic modulus and permeability. The characterization results showed good thermal stability of the microfiber glass wool for application in oil wells submitted to steam injection and, also, that from the particle size data, it was possible to suggest that microfibers milled up to 300 s, are ideal to act as reinforcement to the cement slurries. The rheological parameters, there was committal of plastic viscosity when larger lengths were inserted of microfiber (F90). The values obtained by free water and stability were presented according to API. The mechanical properties, the incorporation of microfiber to the cement slurries gave better rupture tenacity, as compared to reference cement slurries. The values of compressive strength, elastic modulus and permeability have been maintained with respect to the reference cement slurries. Thus, cement slurries reinforced with microfiber glass wool can ensure good application for cementing oil wells submitted to steam injection, which requires control of microcracks, due to the thermal gradients

Influência da adição de cinza do bagaço de cana calcinada em sistemas de pastas para cimentação de poços petrolíferos

Cementing operation is one of the most important stages in the oil well drilling processes and has main function to form hydraulic seal between the various permeable zones traversed by the well. However, several problems may occur with the cement sheath, either during primary cementing or during the well production period. Cements low resistance can cause fissures in the cement sheath and compromise the mechanical integrity of the annular, resulting in contamination of groundwater and producing zones. Several researches show that biomass ash, in particular, those generated by the sugarcane industry have pozzolanic activity and can be added in the composition of the cementing slurries in diverse applications, providing improvements in mechanical properties, revenue and cement durability. Due to the importance of a low cost additive that increases the mechanical properties in a well cementing operations, this study aimed to potentiate the use of sugarcane bagasse ash as pozzolanic material, evaluate the mechanisms of action of this one on cement pastes properties and apply this material in systems slurries aimed to cementing a well with 800 m depth and geothermal gradient of 1.7 °F/100 ft, as much primary cementing operations as squeeze. To do this, the ash beneficiation methods were realized through the processes of grinding, sifting and reburning (calcination) and then characterization by X-ray fluorescence, XRD, TG / DTG, specific surface area, particle size distribution by laser diffraction and mass specific. Moreover, the ash pozzolanic activity added to the cement at concentrations of 0%, 20% and 40% BWOC was evaluated by pozzolanic activity index with lime and with Portland cement. The evaluation of the pozzolanic activity by XRD, TG / DTG and compressive strength confirmed the ash reactivity and indicated that the addition of 20% in the composition of cement slurries produces improvement 34% in the mechanical properties of the slurry cured. Cement slurries properties evaluated by rheological measurements, fluid loss, free fluid, slurry sedimentation, thickening time and sonic strength (UCA) were satisfactory and showed the viability of using the sugarcane ash in cement slurries composition for well cementing

Metodologia para avaliação de cinemática de partículas gasosas em fluidos de viscosidade variável com o tempo e sua aplicação na construção de poços de petróleo

Many challenges have been presented in petroleum industry. One of them is the preventing of fluids influx during drilling and cementing. Gas migration can occur as result of pressure imbalance inside the well when well pressure becomes lower than gas zone pressure and in cementing operation this occurs during cement slurry transition period (solid to fluid). In this work it was developed a methodology to evaluate gas migration during drilling and cementing operations. It was considered gel strength concept and through experimental tests determined gas migration initial time. A mechanistic model was developed to obtain equation that evaluates bubble displacement through the fluid while it gels. Being a time-dependant behavior, dynamic rheological measurements were made to evaluate viscosity along the time. For drilling fluids analyzed it was verified that it is desirable fast and non-progressive gelation in order to reduce gas migration without affect operational window (difference between pore and fracture pressure). For cement slurries analyzed, the most appropriate is that remains fluid for more time below critical gel strength, maintaining hydrostatic pressure above gas zone pressure, and after that gels quickly, reducing gas migration. The model developed simulates previously operational conditions and allow changes in operational and fluids design to obtain a safer condition for well construction

Object grasping and safe manipulation using friction-based sensing.

This project provides a solution for slippage prevention in industrial robotic grippers for the purpose of safe object manipulation. Slippage sensing is performed using novel friction-based sensors, with customisable slippage sensitivity and complemented by an effective slippage prediction strategy. The outcome is a reliable and affordable slippage prevention technology.

Red de Conocimientos Campesinos: hilos de saberes, experiencias y tensiones en Zona Bananera

El conocimiento campesino se ha pensado como un cúmulo de saberes y prácticas tradicionales que las personas que trabajan la tierra han aprendido y transmitido de generación en generación. Pero para el análisis de las relaciones que construyen los campesinos con la tierra, el agua, las semillas, los cultivos, los químicos, las herramientas de trabajo y el dinero, es importante considerar el conocimiento campesino como una red de aprendizajes, saberes, experiencias, prácticas y relaciones territoriales. Aquella red se teje desde múltiples actores tales como funcionarios de instituciones estatales y bancarias, empresarios, familiares, vecinos y amigos, quienes inciden, influyen e intervienen en los recursos que manejan los campesinos. Esta tesis aborda la construcción, reconstrucción y materialización del conocimiento sobre el trabajo en la tierra que han configurado campesinos agricultores en el municipio de Zona Bananera, Magdalena. En las parcelas que poseen dichas personas, han confluido diferentes controles sobre el uso de recursos por parte de empresas bananeras y extractoras de aceite, trabajadores del Instituto Colombiano para la Reforma Agraria INCORA, gobiernos locales y docentes de educación superior. Allí, los campesinos por medio de su conocimiento han apropiado, negociado, disputado y resistido saberes que regulan, restringen y direccionan el manejo de recursos en sus tierras.

Relación entre los riesgos percibidos por los trabajadores en minería subterránea y los accidentes de trabajo y enfermedades laborales

Introducción: La minería es considerada uno de los sectores económicos más importantes por su capacidad para generar recursos en su propio sector y en otros sectores como metalmecánica, agricultura e informática entre otros, y por su contribución al desarrollo socioeconómico sostenible de las poblaciones. Objetivo: Determinar la relación entre los riesgos percibidos por los trabajadores que laboran en minería subterránea en 3 departamentos de Colombia y los Accidentes de Trabajo (AT) y Enfermedades Laborales (EL). Materiales y Métodos: Estudio de corte transversal en 476 trabajadores de minería subterránea. Se incluyeron variables independientes (características sociodemográficas y laborales y percepción del riesgo) y variables dependientes (enfermedad laboral y accidente de trabajo), obtenidas a través de una entrevista directa aplicada por profesionales de la salud previamente capacitados. Para el análisis estadístico se utilizó la Prueba Exacta de Fisher, el Odds Ratio (OR) con el Intervalo de Confianza (IC) del 95%. Resultados: En los trabajadores de minería subterránea en los departamentos de Boyacá, Cundinamarca y Santander, se encontró relación estadística significativa entre la accidentalidad con la percepción de riesgo por iluminación (OR= 2.059, IC= 95%: 1.116, 3.798, p=0.013), percepción de riesgo por movimientos repetitivos (OR= 1.951, IC= 95%: 0.998, 3.815, p=0.034), percepción de riesgo por ruido (OR= 2.275, IC= 95%: 0.974, 5.312, p=0.039) y percepción de riesgo por manejo de cargas (OR= 1.778, IC= 95%: 0.969, 3.264, p=0.041). Conclusión: se encontró que existe una relación significativa entre la percepción de riesgo de los trabajadores de minería subterránea con accidentes de trabajo y que no existe relación entre esta percepción y las enfermedades laborales.

Multiplex PCR para a identificação de cochonilhas farinhentas (Hemiptera Pseudococcidae) presentes na cultura da videira no Brasil.

Uma alta diversidade de espécies de cochonilhas farinhentas (Hemiptera:Pseudococcidae) tem sido observada na cultura da videira. Algumas espécies são inclusive consideradas pragas quarentenárias para outros países. A identificação de cochonilhas farinhentas é um dos fatores limitantes para o manejo destes insetos no campo, em decorrência da grande similaridade morfológica observada entre espécies próximas e da variação morfológica que ocorre em alguns grupos em decorrência do hospedeiro e da temperatura de desenvolvimento. Além disto, a identificação destes insetos baseia-se em características morfológicas presentes apenas em fêmeas adultas, realizada por poucos especialistas. O objetivo deste trabalho foi desenvolver um ?kit? de identificação molecular das principais espécies de cochonilhas farinhentas presentes na cultura da videira no Brasil [(Dysmicoccus brevipes (Cockerell), Phenacoccus solenopsis (Tinsley), Planococcus citri (Risso), Planococcus ficus (Signoret) e Pseudococcus viburni (Signoret)]. Cochonilhas farinhentas foram coletadas na Serra Gaúcha, RS, Vale do São Francisco (Polos Juazeiro- BA e Petrolina-PE) e em cidades produtoras de uvas do Paraná.

Artrópodos-fitófagos em frutíferas nativas e pequenas frutas.

Neste trabalho são apresentadas informações sobre as principais espécies pragas associadas à amoreira-preta, mirtileiro, pitangueira e araçazeiro, sendo dado destaque ao desenvolvimento da mosca-das-frutas sul-americana (Anastrepha fraterculus) nestes hospedeiros, bem como ao estádio fenológico dos frutos susceptível a praga.

Evolução do índice de área foliar e índice SPAD da soja em função da densidade de semeadura.

2016

Desempenho produtivo da soja em resposta a densidades de plantas e níveis de adubação fosfatada e potássica.

2016

Avaliação do sistema de terraços após manutenção e readequação em uma fazenda na região norte do Paraná.

2016