Concrete Pavement Joint Sawing, Cleaning, and Sealing, November 2004

Proper storage practices are critical to protect materials from intermingling, contamination, or degradation, and to maintain consistent aggregate gradation throughout a project. Concrete Paving Workforce Reference no.3

Spectral efficiency in reference-signal-assisted low-power wireless communication

Expressions relating spectral efficiency, power and Doppler spectrum are derived for low-power Rayleighfaded wireless channels with proper complex signaling. Noside information on the state of the channel is assumed at the receiver. Rather, periodic reference signals are postulated inaccordance with the functioning of most wireless systems. In contrast with most previous studies, which relied on block-fading channel models, a continuous-fading model is adopted. This embeds the Doppler spectrum directly in thederived expressions thereby imbuing them with practical significance.

Regulated Materials Facility Revenue Bond Funds, Iowa State University of Science and Technology, Independent Auditor's Reports, Financial Statements, June 30, 2005

State University Audit Report

Metodologia del treball en neologia: criteris, materials i processos

L'Observatori de Neologia, dirigit per la Dra. M. Teresa Cabré, neix com a grup de recerca l'any 1988 a la Universitat de Barcelona i des de 1994 s'incorpora com a projecte a l'Institut Universitari de Lingüística Aplicada de la Universitat Pompeu Fabra. L'Observatori de Neologia analitza el fenomen de l'aparició de paraules noves o neologismes en l'ús, tant pel que fa al català com al castellà. Actualment compta amb una base de dades de més de 82.000 ocurrències per al català i de més de 60.000 ocurrències per al castellà procedents de textos escrits i orals de mitjans de comunicació.Aquest volum recull la metodologia establerta des de l’inici del projecte pels membres fundadors de l’Observatori de Neologia - tot i que revisada i actualitzada al llarg dels anys. Aquesta metodologia guia tots els treballs de detecció, selecció, tractament i emmagatzemament de les dades que es duen a terme a l’Observatori.

Five-Year Denosumab Treatment of Postmenopausal Women with Osteoporosis: Results from the first two Years of the Freedom Trial Extension

Objectives : The FREEDOM trial1 open-label extension is designed to evaluate the long-term efficacy and safety of denosumab for up to 10 years. We report the results from the first 2 years of the extension, representing up to 5 years of denosumab exposure.Materials/Methods : Postmenopausal women enrolled in the extension previously completed FREEDOM. During the extension, all women receive denosumab (60 mg) every 6 months and calcium and vitamin D daily. For the FREEDOM denosumab group, the data reflect 5 years of denosumab treatment (long-term group). For the FREEDOM placebo group, the data reflect 2 years of denosumab treatment (de novo group). P-values are descriptive.Results : There were 4550 (70.2%) FREEDOM women enrolled in the extension (2343 long-term; 2207 de novo). During the 4th and 5th years of denosumab treatment, the long-term group had further 1.9% and 1.7% increases in lumbar spine BMD and further 0.7% and 0.6% increases in total hip BMD (all P<0.0001 compared with extension baseline). Total BMD increases with 5-year denosumab treatment were 13.7% (lumbar spine) and 7.0% (total hip). In the de novo group, BMD increased during the first 2 years of denosumab treatment by 7.9% (lumbar spine) and 4.1% (total hip) (all P<0.0001 compared with extension baseline). After denosumab administration, serum CTX was rapidly and maximally reduced in both groups with the characteristic attenuation observed at the end of the dosing interval, as previously reported.2 Incidences of new vertebral and nonvertebral fractures were low and below rates observed in the FREEDOM placebo group. Adverse event reports were similar for both groups: in the long-term group, 83.4% reported AEs and 18.9% were serious. In the de novo group, the percentages were 82.8% and 19.4%, respectively. In FREEDOM, the respective percentages were 92.8% and 25.8% in the denosumab group and 93.1% and 25.1% in the placebo group. Two subjects in the de novo group had AEs adjudicated to ONJ which healed without further complications ; one resolved within the 6-month dosing interval and denosumab was continued. There were no atypical femoral fractures.Conclusions : Denosumab treatment for 5 years was well-tolerated and continued to significantly reduce CTX and significantly increase BMD. Reference: 1)Cummings;NEJM;2009;361:756, 2)Eastell;JBMR;2010; doi-10.1002/jbmr.251 Disclosure of Interest: This study was funded by Amgen; S Papapoulos: Consulting fees from Amgen, Merck, Novartis, Procter & Gamble, GSK, and Wyeth; R Chapurlat: Research grants and/or consulting fees from Amgen, Merck, Novartis, sanofi-aventis, Roche, Servier, and Warner Chilcott;ML Brandi: Research grants and/or consulting fees from Amgen, Eli Lily, GSK, MSD, NPS, Nycomed, Roche, Servier, and Stroder; JP Brown: Research grants and/or consulting or speaking fees from Abott, Amgen, Bristol Myers Squibb, Eli Lilly, Pfizer, Roche, Novartis, Merck, and Warner Chilcott; E Czerwinski: Research grants from Amgen, Astrazeneca, Danone Research, Eli Lilly, Merck Sharp & Dohme, Merck Serono, Novartis, Pfizer, Roche, SantoSolve AS, and Servier; N Daizadeh, A Grauer, C Libanati: Employed by Amgen and own Amgen stocks or stock options; M-A Krieg, D Mellstrom, H Resch: None; S Radominski: Research grants from Amgen, Pfizer, Novartis, Bristol-Myers Squibb, Roche, and Aventis; Z Man: Lecture fees and/or consulting fees from Merck, Novartis, Roche, and sanofi-aventis. Novartis steering committee member; JA Roman: Research grants from Roche; J-Y Reginster: Research grants, consulting fees, and/or lecture fees from Amgen, Analis, Bristol Myers Squibb, Ebewee Pharma, Genevrier, GSK, IBSA, Lilly, Merck Sharp & Dhome, Negma, Novartis, Novo-Nordisk, Nycomed, NPS, Roche, Rottapharm, Servier, Teijin, Teva, Theramex, UCB, Wyeth, and Zodiac; C Roux: Research grants and/or consulting fees from Amgen, MSD, Novartis, Servier, and Roche; SR Cummings: Research grants and/or consulting fees from Amgen, Eli Lilly, Novartis, and Merck; HG Bone: Research grants and/or consulting or speaking fees from Amgen, Eli Lilly, Merck, Nordic Bioscience, Novartis, Takeda, and Zelos

Can fisheries-induced evolution shift reference points for fisheries management?

Biological reference points are important tools for fisheries management. Reference points are not static, but may change when a population's environment or the population itself changes. Fisheries-induced evolution is one mechanism that can alter population characteristics, leading to "shifting" reference points by modifying the underlying biological processes or by changing the perception of a fishery system. The former causes changes in "true" reference points, whereas the latter is caused by changes in the yardsticks used to quantify a system's status. Unaccounted shifts of either kind imply that reference points gradually lose their intended meaning. This can lead to increased precaution, which is safe, but potentially costly. Shifts can also occur in more perilous directions, such that actual risks are greater than anticipated. Our qualitative analysis suggests that all commonly used reference points are susceptible to shifting through fisheries-induced evolution, including the limit and "precautionary" reference points for spawning-stock biomass, Blim and Bpa, and the target reference point for fishing mortality, F0.1. Our findings call for increased awareness of fisheries-induced changes and highlight the value of always basing reference points on adequately updated information, to capture all changes in the biological processes that drive fish population dynamics.

Wear of two artificial tooth materials in vivo: a 12-month pilot study.

STATEMENT OF PROBLEM: Wear of methacrylate artificial teeth resulting in vertical loss is a problem for both dentists and patients. PURPOSE: The purpose of this study was to quantify wear of artificial teeth in vivo and to relate it to subject and tooth variables. MATERIAL AND METHODS: Twenty-eight subjects treated with complete dentures received 2 artificial tooth materials (polymethyl methacrylate (PMMA)/double-cross linked PMMA fillers; 35%/59% (SR Antaris DCL, SR Postaris DCL); experimental 48%/46%). At baseline and after 12 months, impressions of the dentures were poured with improved stone. After laser scanning, the casts were superimposed and matched. Maximal vertical loss (mm) and volumetric loss (mm(3)) were calculated for each tooth and log-transformed to reduce variability. Volumetric loss was related to the occlusally active surface area. Linear mixed models were used to study the influence of the factors jaw, tooth, and material on adjusted (residual) wear values (alpha=.05). RESULTS: Due to drop outs (n=5) and unmatchable casts (n=3), 69% of all teeth were analyzed. Volumetric loss had a strong linear relationship to surface area (P<.001); this was less pronounced for vertical loss (P=.004). The factor showing the highest influence was the subject. Wear was tooth dependent (increasing from incisors to molars). However, these differences diminished once the wear rates were adjusted for occlusal area, and only a few remained significant (anterior versus posterior maxillary teeth). Another influencing factor was the age of the subject. CONCLUSIONS: Clinical wear of artificial teeth is higher than previously measured or expected. The presented method of analyzing wear of artificial teeth using a laser-scanning device seemed suitable.

Analysis of LEDGF/p75 expression regulation

Background To replicate, retroviruses must insert DNA copies of their RNA genomes into the host genome. This integration process is catalyzed by the viral integrase protein. The site of viral integration has been shown to be non-random and retrovirus-specific. LEDGF/p75, a splice variant encoded by PSIP1 gene and described as a general transcription coactivator, was identified as a tethering factor binding both to chromatin and to lentiviral integrases, thereby affecting integration efficiency as well as integration site selection. LEDGF/p75 is still a poorly characterized protein, and its cellular endogenous function has yet to be fully determined. In order to start unveiling the roles of LEDGF/p75 in the cell, we started to investigate the mechanisms involved in the regulation of LEDGF/p75. Materials and methods To identify PSIP1 minimal promoter and associated regulatory elements, we cloned a region starting 5 kb upstream the transcription start site (TSS, +1 reference position) to the ATG start codon (+816), as well as systematic truncations, in a plasmid containing the firefly luciferase reporter gene. These constructs were co-transfected into HEK293 cells with a plasmid encoding the Renilla luciferase under the pTK promoter as an internal control for transfection efficiency. Both luciferase activities were assessed by luminescence as an indicator of promoter activity. Results Luciferase assays identified regions -76 to +1 and +1 to +94 as two independent minimal promoters showing respectively a 3.7x and 2.3x increase in luciferase activity. These two independent minimal promoters worked synergistically increasing luciferase activity up to 16.3x as compared to background. Moreover, we identified five regulatory blocks which modulated luciferase activity depending on the DNA region tested, three enhancers (- 2007 to -1159, -284 to -171 and +94 to +644) and two silencers (-171 to -76 and +796 to +816). However, the silencing effect of the region -171 to -76 is dependent on the presence of the +94 to +644 region, ruling out the enhancer activity of the latter. Computational analysis of PSIP1 promoter revealed the absence of TATA box and initiator (INR) sequences, classifying this promoter as nonconventional. TATA-less and INR-less promoters are characterized by multiple Sp1 binding sites, involved in the recruitment of the RNA pol II complex. Consistent with this, PSIP1 promoter contains multiple putative Sp1 binding sequences in regions -76 to +1 and +1 to +94.

Reference intervals for common carotid intima-media thickness measured with echotracking: relation with risk factors.

AIMS: Common carotid artery intima-media thickness (CCIMT) is widely used as a surrogate marker of atherosclerosis, given its predictive association with cardiovascular disease (CVD). The interpretation of CCIMT values has been hampered by the absence of reference values, however. We therefore aimed to establish reference intervals of CCIMT, obtained using the probably most accurate method at present (i.e. echotracking), to help interpretation of these measures. METHODS AND RESULTS: We combined CCIMT data obtained by echotracking on 24 871 individuals (53% men; age range 15-101 years) from 24 research centres worldwide. Individuals without CVD, cardiovascular risk factors (CV-RFs), and BP-, lipid-, and/or glucose-lowering medication constituted a healthy sub-population (n = 4234) used to establish sex-specific equations for percentiles of CCIMT across age. With these equations, we generated CCIMT Z-scores in different reference sub-populations, thereby allowing for a standardized comparison between observed and predicted ('normal') values from individuals of the same age and sex. In the sub-population without CVD and treatment (n = 14 609), and in men and women, respectively, CCIMT Z-scores were independently associated with systolic blood pressure [standardized βs 0.19 (95% CI: 0.16-0.22) and 0.18 (0.15-0.21)], smoking [0.25 (0.19-0.31) and 0.11 (0.04-0.18)], diabetes [0.19 (0.05-0.33) and 0.19 (0.02-0.36)], total-to-HDL cholesterol ratio [0.07 (0.04-0.10) and 0.05 (0.02-0.09)], and body mass index [0.14 (0.12-0.17) and 0.07 (0.04-0.10)]. CONCLUSION: We estimated age- and sex-specific percentiles of CCIMT in a healthy population and assessed the association of CV-RFs with CCIMT Z-scores, which enables comparison of IMT values for (patient) groups with different cardiovascular risk profiles, helping interpretation of such measures obtained both in research and clinical settings.

Dual-wavelength digital holographic microscopy with sub-nanometer axial accuracy

We present dual-wavelength Digital Holographic Microscopy (DHM) measurements on a certified 8.9 nm high Chromium thin step sample and demonstrate sub-nanometer axial accuracy. We introduce a modified DHM Reference Calibrated Hologram (RCH) reconstruction algorithm taking into account amplitude contributions. By combining this with a temporal averaging procedure and a specific dual-wavelength DHM arrangement, it is shown that specimen topography can be measured with an accuracy, defined as the axial standard deviation, reduced to at least 0.9 nm. Indeed, it is reported that averaging each of the two wavefronts recorded with real-time dual-wavelength DHM can provide up to 30% spatial noise reduction for the given configuration, thanks to their non-correlated nature. ©2008 COPYRIGHT SPIE

Materials and Mix Optimization Procedures for PCC Pavements, March 2006

Severe environmental conditions, coupled with the routine use of deicing chemicals and increasing traffic volume, tend to place extreme demands on portland cement concrete (PCC) pavements. In most instances, engineers have been able to specify and build PCC pavements that met these challenges. However, there have also been reports of premature deterioration that could not be specifically attributed to a single cause. Modern concrete mixtures have evolved to become very complex chemical systems. The complexity can be attributed to both the number of ingredients used in any given mixture and the various types and sources of the ingredients supplied to any given project. Local environmental conditions can also influence the outcome of paving projects. This research project investigated important variables that impact the homogeneity and rheology of concrete mixtures. The project consisted of a field study and a laboratory study. The field study collected information from six different projects in Iowa. The information that was collected during the field study documented cementitious material properties, plastic concrete properties, and hardened concrete properties. The laboratory study was used to develop baseline mixture variability information for the field study. It also investigated plastic concrete properties using various new devices to evaluate rheology and mixing efficiency. In addition, the lab study evaluated a strategy for the optimization of mortar and concrete mixtures containing supplementary cementitious materials. The results of the field studies indicated that the quality management concrete (QMC) mixtures being placed in the state generally exhibited good uniformity and good to excellent workability. Hardened concrete properties (compressive strength and hardened air content) were also satisfactory. The uniformity of the raw cementitious materials that were used on the projects could not be monitored as closely as was desired by the investigators; however, the information that was gathered indicated that the bulk chemical composition of most materials streams was reasonably uniform. Specific minerals phases in the cementitious materials were less uniform than the bulk chemical composition. The results of the laboratory study indicated that ternary mixtures show significant promise for improving the performance of concrete mixtures. The lab study also verified the results from prior projects that have indicated that bassanite is typically the major sulfate phase that is present in Iowa cements. This causes the cements to exhibit premature stiffening problems (false set) in laboratory testing. Fly ash helps to reduce the impact of premature stiffening because it behaves like a low-range water reducer in most instances. The premature stiffening problem can also be alleviated by increasing the water–cement ratio of the mixture and providing a remix cycle for the mixture.

Regulated Materials Facility Revenue Bond Funds, Iowa State University of Science and Technology, Independent Auditor's Report, Basic Financial Statement and Supplementary Information, June 30, 2006

State University Audit Report

Recognition judgments and the performance of the recognition heuristic depend on the size of the reference class

In a series of three experiments, participants made inferences about which one of a pair of two objects scored higher on a criterion. The first experiment was designed to contrast the prediction of Probabilistic Mental Model theory (Gigerenzer, Hoffrage, & Kleinbölting, 1991) concerning sampling procedure with the hard-easy effect. The experiment failed to support the theory's prediction that a particular pair of randomly sampled item sets would differ in percentage correct; but the observation that German participants performed practically as well on comparisons between U.S. cities (many of which they did not even recognize) than on comparisons between German cities (about which they knew much more) ultimately led to the formulation of the recognition heuristic. Experiment 2 was a second, this time successful, attempt to unconfound item difficulty and sampling procedure. In Experiment 3, participants' knowledge and recognition of each city was elicited, and how often this could be used to make an inference was manipulated. Choices were consistent with the recognition heuristic in about 80% of the cases when it discriminated and people had no additional knowledge about the recognized city (and in about 90% when they had such knowledge). The frequency with which the heuristic could be used affected the percentage correct, mean confidence, and overconfidence as predicted. The size of the reference class, which was also manipulated, modified these effects in meaningful and theoretically important ways.

Iowa Certified Nursing Assistants Wage and Benefit Survey

Iowa Certified Nursing Assistants Wage and Benefit Survey

Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load.

OBJECTIVES: (1) To evaluate the changes in surface roughness and gloss after simulated toothbrushing of 9 composite materials and 2 ceramic materials in relation to brushing time and load in vitro; (2) to assess the relationship between surface gloss and surface roughness. METHODS: Eight flat specimens of composite materials (microfilled: Adoro, Filtek Supreme, Heliomolar; microhybrid: Four Seasons, Tetric EvoCeram; hybrid: Compoglass F, Targis, Tetric Ceram; macrohybrid: Grandio), two ceramic materials (IPS d.SIGN and IPS Empress polished) were fabricated according to the manufacturer's instructions and optimally polished with up to 4000 grit SiC. The specimens were subjected to a toothbrushing (TB) simulation device (Willytec) with rotating movements, toothpaste slurry and at three different loads (100g/250g/350g). At hourly intervals from 1h to 10h TB, mean surface roughness Ra was measured with an optical sensor and the surface gloss (Gl) with a glossmeter. Statistical analysis was performed for log-transformed Ra data applying two-way ANOVA to evaluate the interaction between load and material and load and brushing time. RESULTS: There was a significant interaction between material and load as well as between load and brushing time (p<0.0001). The microhybrid and hybrid materials demonstrated more surface deterioration with higher loads, whereas with the microfilled resins Heliomolar and Adoro it was vice versa. For ceramic materials, no or little deterioration was observed over time and independent of the load. The ceramic materials and 3 of the composite materials (roughness) showed no further deterioration after 5h of toothbrushing. Mean surface gloss was the parameter which discriminated best between the materials, followed by mean surface roughness Ra. There was a strong correlation between surface gloss and surface roughness for all the materials except the ceramics. The evaluation of the deterioration curves of individual specimens revealed a more or less synchronous course suspecting hinting specific external conditions and not showing the true variability in relation to the tested material. SIGNIFICANCE: The surface roughness and gloss of dental materials changes with brushing time and load and thus results in different material rankings. Apart from Grandio, the hybrid composite resins were more prone to surface changes than microfilled composites. The deterioration potential of a composite material can be quickly assessed by measuring surface gloss. For this purpose, a brushing time of 10h (=72,000 strokes) is needed. In further comparative studies, specimens of different materials should be tested in one series to estimate the true variability.