Avaliação do contato pneu-solo em três modelos de pneus agrícolas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produção e qualidade de sementes de cenoura das cultivares Brasília e Carandaí

O presente trabalho teve por objetivo avaliar a produção e a qualidade das sementes obtidas de plantas de cenoura, das cultivares Brasília e Carandaí. O delineamento experimental foi em blocos ao acaso, com quatro repetições e cinco plantas úteis por parcela. Adotou-se o sistema semente-raiz-semente e indução floral por vernalização das raízes, durante 40 dias, a 5 °C. Foram avaliados o número de umbelas, as produções de sementes por planta e por umbela, a massa (g) de mil sementes, a germinação e a primeira contagem de germinação em cada classe de umbela. A cultivar Brasília superou a Carandaí na produção de sementes por planta (52 g), em virtude da maior produção nas umbelas secundárias (38 g), e não diferiu da cultivar Carandaí quanto à produção nas umbelas primárias e terciárias. Nas demais características avaliadas não foram observadas diferenças entre as cultivares. A produção por umbela foi-se reduzindo sucessivamente das primárias (7,5 g por umbela) às secundárias (3,0 g por umbela) e às terciárias (0,5 g por umbela). As sementes das umbelas primárias apresentaram maior massa (média de 2,1 g por mil sementes) em relação às secundárias (1,6 g por mil sementes) que, por sua vez, superaram as terciárias (1,4 g por mil sementes). As sementes das umbelas primárias e secundárias apresentaram maior poder germinativo comparativamemte às terciárias.

Desenvolvimento de uma desfribadeira para obtenção da fibra da folha do abacaxi

In 1998 the first decorticator was developed in the Textile Engineering Laboratory and patented for the purpose of extracting fibres from pineapple leaves, with the financial help from CNPq and BNB. The objective of the present work was to develop an automatic decorticator different from the first one with a semiautomatic system of decortication with automatic feeding of the leaves and collection of the extracted fibres. The system is started through a command system that passes information to two engines, one for starting the beater cylinder and the other for the feeding of the leaves as well as the extraction of the decorticated fibres automatically. This in turn introduces the leaves between a knife and a beater cylinder with twenty blades (the previous one had only 8 blades). These blades are supported by equidistant flanges with a central transmission axis that would help in increasing the number of beatings of the leaves. In the present system the operator has to place the leaves on the rotating endless feeding belt and collect the extracted leaves that are being carried out through another endless belt. The pulp resulted form the extraction is collected in a tray through a collector. The feeding of the leaves as well as the extraction of the fibres is controlled automatically by varying the velocity of the cylinders. The semi-automatic decorticator basically composed of a chassis made out of iron bars (profile L) with 200cm length, 91 cm of height 68 cm of width. The decorticator weighs around 300Kg. It was observed that the increase in the number of blades from 8 to twenty in the beater cylinder reduced the turbulence inside the decorticator, which helped to improve the removal of the fibres without any problems as well as the quality of the fibres. From the studies carried out, from each leaf 2,8 to 4,5% of fibres can be extracted. This gives around 4 to 5 tons of fibres per hectare, which is more than that of cotton production per hectare. This quantity with no doubt could generate jobs to the people not only on the production of the fibres but also on their application in different areas

Seleção de sementes de milho durante a simulação da semeadura com disco perfurado horizontal

Teve-se o objetivo de verificar a possível seleção de sementes de milho - arredondadas e achatadas - no processo de semeadura com disco perfurado horizontal, bem como as conseqüências na distribuição longitudinal. Os registros dos dados deram-se pela avaliação visual de duas pessoas, com contador manual, no final da esteira carpetada em movimento de 1,54 m s-1, com 4,60 m de perspectiva para avaliação. Assim, um sensor registrava o número de orifícios do disco horizontal que devia passar pelo tubo condutor, e os espaçamentos falhos e múltiplos eram computados por pessoas diferentes. Os espaçamentos aceitáveis foram obtidos pela subtração dos espaçamentos falhos e múltiplos do total contabilizado. A medição do comprimento e espessura das sementes foi realizada com auxílio de paquímetro. Não houve alterações significativas nas variáveis estudadas, até a passagem de 55 mil orifícios do disco horizontal pelo tubo condutor; portanto, não houve seleção de sementes de milho durante a simulação do processo de semeadura.

Avaliação das previsões do atraso zenital troposférico para a América do Sul, obtidas usando modelo de previsão numérica de tempo com alta resolução espacial

A Center for Weather Forecast and Climatic Studies of National Institute for Space Research (CPTEC/INPE) has provided to the Brazilian Geodetic community, since 2004, an alternative to correct the GNSS observables from the tropospheric refraction. Numerical Weather Prediction (NWP) Model is used to generate Zenital Tropospheric Delay (ZTD). For the version 1, it was developed a model with horizontal resolution of 100 km, which was updated with Eta model, with resolution of 20 km. This paper provides the most significative details of the current version, as well an evaluation of its quality, using for such ZTD estimates from GPS data collect at RBMC. Comparing to the old version, considerable improvement could be observed from the new model, mainly in Brasilia and Curitiba, reaching up to 55% improvement. When all stations were used in the quality control, almost null bias and RMS of about 4 to 5 cm could be observed.

Sandfly fauna in an area endemic for visceral leishmaniasis in Aracaju, State of Sergipe, Northeast Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Mutagenic activity promoted by amentoflavone and methanolic extract of Byrsonima crassa Niedenzu

Byrsonima crassa is a plant pertaining to the Brazilian central savannah-like belt of vegetation and popularly used for the treatment of gastric dysfunctions and diarrhoea. The methanol extract contains catechin, tannins, terpenes and flavonoids; both mutagenic potential and antioxidant properties have been ascribed to flavonoids. The mutagenicity of some flavonoids is believed to be associated with the formation of reactive oxygen species and seems to depend on the number and position of hydroxyl groups. In the present study the mutagenic activity of the methanol, chloroform and 80% aqueous methanol extracts, as well as acetate and aqueous sub-fractions, of this medicinal plant were evaluated by Salmonella typhimurium assay, using strains 100, TA98, TA102 and TA97a, and in mouse reticulocytes. The results showed mutagenic activity of the methanolic extract in the TA98 strain without S9, but no mutagenicity to mouse cells in any of the extracts. The acetate fraction showed strong signs of mutagenicity without S9, suggesting that in this enriched fraction were concentrated the compounds that induced mutagenic activity. The aqueous fraction showed no mutagenic activity. The TLC and HSCCC analyses of the acetate fraction with some standard compounds permitted the isolation of the quercetin-3-O-beta-D-galactopyranoside, quercetin-3-O-alpha-L-arabinopyranoside, amentoflavone, methyl gallate and (+)-catechin, of which only the amentoflavone exhibited positive mutagenicity to TA98 (+S9, -S9). (c) 2006 Elsevier B.V.. All rights reserved.

Crescimento de filmes nanométricos monocristalinos de Fe/MgO(100) por "SPUTTERING" DC

The research behind this master dissertation started with the installation of a DC sputtering system, from its first stage, the adaptation of a refrigerating system, passing by the introduction of a heating system for the chamber using a thermal belt, until the deposition of a series of Fe/MgO(100) single crystal nanometric film samples. The deposition rates of some materials such as Fe, Py and Cu were investigated through an Atomic Force Microscope (AFM). For the single crystal samples, five of them have the same growth parameters and a thickness of 250Å, except for the temperature, which varies from fifty degrees from one to another, from 100ºC to 300ºC. Three other samples also have the same deposition parameters and a temperature of 300ºC, but with thickness of 62,5Å, 150Å, and 250Å. Magneto-optical Kerr Effect (MOKE) of the magnetic curves measurements and Ferromagnetic Resonance (FMR) were made to in order to study the influence of the temperature and thickness on the sample s magnetic properties. In the present dissertation we discuss such techniques, and the experimental results are interpreted using phenomenological models, by simulation, and discussed from a physical point of view, taking into account the system s free magnetic energy terms. The results show the growth of the cubic anisotropy field (Hac) as the sample s deposition temperature increases, presenting an asymptotic behavior, similar to the characteristic charging curve of a capacitor in a RC circuit. A similar behavior was also observed for the Hac due to the increase in the samples thicknesses. The 250˚A sample, growth at 300°C, presented a Hac field close to the Fe bulk value

Secular dynamics and family identification among highly inclined asteroids in the Euphrosyne region

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The stable archipelago in the region of the Pallas and Hansa dynamical families

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

On the stability of the satellites of asteroid 87 Sylvia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Exploring S-type orbits in the Pluto-Charon binary system

This work generates, through a sample of numerical simulations of the restricted three-body problem, diagrams of semimajor axis and eccentricity which defines stable and unstable zones for particles in S-type orbits around Pluto and Charon. Since we consider initial conditions with 0 <= e <= 0.99, we found several new stable regions. We also identified the nature of each one of these newly found stable regions. They are all associated to families of periodic orbits derived from the planar circular restricted three-body problem. We have shown that a possible eccentricity of the Pluto-Charon system slightly reduces, but does not destroy, any of the stable regions.

Gravitational effects of Nix and Hydra in the external region of the Pluto-Charon system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dynamical erosion of asteroid groups in the region of the Pallas family

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Chaotic diffusion caused by close encounters with several massive asteroids The (4) Vesta case

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)