Subcontratación en sectores conocimiento-intensivos : El caso de los trabajos informático y bio-informático

La subcontratación en sectores conocimiento-incentivos tiene efectos similares a los de todo proceso de tercerización con el agregado de que la naturaleza del producto muchas veces habilita su realización por razones técnicas y no necesariamente responde o esta ligado a trabajos de baja calificación. En estos proceso de trabajo complejos la subcontratación esta a la orden del día - cualquiera sea el tipo de producto que se realice- y genera los mismos problemas que en el sector industrial. El trabajo informático es resultado de una colaboración social explícita o implícita cuya organización implica la formación de equipos, el trabajo en redes y la realización de proyectos de todo tipo, en un continuum que va desde el desarrollo de software a medida, la consultoría y las simulaciones hasta los videojuegos. En el caso del trabajo informático vinculado a la biotecnología se agregan consideraciones institucionales significativas al estar vinculados al sistema científico público y privado. Para analizar el tema nos apoyamos en numerosas entrevistas en profundidad realizadas a trabajadores del sector de informática y bio-informática, junto con la observación en los lugares de trabajo

Minerals and geochemistry of DSDP Hole 81-552A

The acid insoluble coarse fractions of the glacial-interglacial sequence of Hole 552A in the NE Atlantic are made up of varying amounts of terrigenous detritus, biogenic silica, and pyroclastic material, principally volcanic glass. Volcanic ash content varies significantly over the entire interval, and the three North Atlantic ash horizons of Ruddiman and Glover (1972) can be recognized satisfactorily. The terrigenous detritus is of mixed metamorphic-basaltic type and probably originated on the Greenland landmass

Organic geochemistry of upper Jurassic-Cretaceous sediments at DSDP Hole 71-511

Cretaceous and Jurassic sediments 435 m thick were drilled at Site 511, in the basin province of the Falkland Plateau, during DSDP Leg 71. The calcareous Unit 3 and the clayey zeolitic Unit 4, both of Senonian age, revealed poorly preserved organic matter indicative of oxidized environments. The same characteristics prevailed for the clayey Unit 5 of Turonian to Albian age. Strictly reducing environments existed for black facies along Unit 6 of earliest Albian to Late Jurassic age and allowed the preservation of a rich organic material that is marine in origin. Besides the transition from reducing conditions in Unit 6 to oxidizing conditions in Unit 5, there are 20 meters of sediments in Cores 56-58 where detrital, nonmarine and then marine organic matter, both implying more or less reducing environments, are interlain by poorly preserved material. In the black shales of the bottom Cores 69 and 70, some nonmarine detritus is mixed with the predominantly marine organic material. An immature stage of evolution can be assigned to all of the samples studied. The chapter also undertakes a comparison with contemporaneous lithologies at adjacent Sites 327 and 330 and attempts some reconstruction of the geography of the eastern Falkland Plateau during the Mesozoic.

Geochemistry of ash from Santorin, Greece

Santorin, am südlichsten Punkt des Kykladenbogens gelegen, ist der einzige noch tätige Vulkan in der südlichen Ägäis. Der Vulkanismus begann vor ca. 1.6 Mio. Jahren. Santorin besteht aus 5 Inseln, die nahezu vollständig aus vulkanischen Gesteinen aufgebaut sind, die im Laufe der Vulkangeschichte aus verschiedenen Eruptionszentren gefördert wurden. Abgesehen von den Laven im N der Hauptinsel Thera, wird der Zentral- und Südteil der Insel in der Hauptsache von den pyroklastischen Förderprodukten des sog. Thera-Vulkans aufgebaut. In der vorliegenden Arbeit waren diese pyroklastischen Serien Ziel der Untersuchungen. Die Ergebnisse daraus können folgendermaßen zusammengefaßt werden: - Die Aufnahme von 14 detaillierten Profilen und deren Korrelierung erbrachte die Einteilung der pyroklastischen Schichten in 5 Haupt-Folgen: T5/1 - Untere Bimsstein-Folge (Bu), T5/2-Mittlere Bimsstein-Folge (Bm), - T5/3, Die Obere Bimsstein-Folge (Bo) wurde dabei nicht weiter berücksichtigt, da sie bereits in zahlreichen Arbeiten untersucht worden ist. - Die als T5/1-3 bezeichneten Serien bestehen aus Aschen, Schlacken, wenigen Bimsstein-Horizonten und untergeordnet Ignimbriten, 'pyroclastic' und 'ash flow'-Ablagerungen, sowie Laharen. Umlagerungen und Bodenhorizonte zeigen die Unterbrechung in der vulkanischen Tätigkeit an. - In den Tg-Folgen konnten jeweils einer oder mehrere Leit-Horizonte gefunden werden, die es ermöglichen die drei Tg-Serien zu unterscheiden und zu korrelieren. - Die Untere Bimsstein-Folge (Bu) wurde in sechs Einheiten unterteilt, die eine Wechselfolge von 'pumice fall' und 'pumice flow'-Ablagerungen bilden. - Mineralogische Untersuchungen zeigen für die 5 Haupt-Folgen nur geringe Unterschiede. Die Bimssteine und Schlacken bestehen überwiegend aus Glas und haben nur wenige Phänokristalle (3-12 Vol.*), wobei der Plagioklas (Andesin-Labradorit) überwiegt; Orthopyroxen (Hypersthen) und Klinopyroxen (diops. Augit) stellen ca. 30% der Einsprengunge. An Akzessorien sind vorhanden: Apatit, Magnetit, Hämatit und sehr selten Hornblende. - Ein Versuch zur Unterscheidung der Gesteine in den einzelnen Schicht-Einheiten war die Bestimmung der Lichtbrechung und der Dichte. Es zeigte sich, daß die Dichte weniger geeignet ist, die Lichtbrechung aber eine schwache Differenzierung widerspiegelt und somit für die Bimssteine und Schlacken, aber auch für die Bimssteine innerhalb des Bu unterschiedliche Werte gefunden wurden - Aus den Korngrößen-Analysen des Asche-Leithorizontes der T5/3-Folge ergaben sich die Lage des Eruptionszentrums und die damals vorherrschende Windrichtung. - Die Oberen Ignimbrite (Ign., im Hangenden der T5/3-Folge) konnten erstmals in 5 Einheiten unterteilt werden. - Die Seltenen Erden-Analysen erbrachten für die einzelnen Folgen in etwa die gleichen SEE-Spektren. - Die geochemischen Untersuchungen von ca. 120 Proben sind in verschiedenen Diagrammen dargestellt. Daraus wird deutlich, daß die T5-Folgen die basischsten Glieder sind. Es handelt sich überwiegend um Quarz-Andesite und Quarz-Latiandesite, während die Bimsstein-Serien (Bu u. Bm) eine quarz-latiandesitische bis rhyodacitische Zusammensetzung haben. Es sind aber alles kalkalkaline Gesteine, die in den Bereich der Kontinentalrand-Andesite gehören. - Es wird angenommen, daß die Gesteine des Thera-Vulkans aus einer Magmakammer stammen. Während Zeiten ± kontinuierlicher, explosiver Tätigkeit wurden die Aschen und Schlacken der T5-Serien gefördert, die gegenüber den Bimsstein-Folgen relativ basisch sind. Während längerer Ruheperioden (Bodenhorizonte am Top der Tc-Folgen) differenzierte die Schmelze in der Magmakammer, vorwiegend durch Kristallfraktionierung. In den paroxysmalen Ausbrüchen wurden dann die sauren, gasreichen Bimssteine des Bu, Bm und Bo gefördert. - Anhand der lithologischen und geochemischen Untersuchungen ließen sich die etwaigen Eruptionszentren, die Ausbruchsmechanismen und der Ablagerungstyp der Schichten herleiten und daraus die Vulkangeschichte rekonstruieren, wie sie in vier Tabellen übersichtlich zusammengefaßt sind. - Schließlich sollen paläomorphologische Karten die einzelnen Stadien des Thera-Vulkans veranschaulichen.

Geochemistry and isotopes at DSDP Site 68-503

Nodules occur in the siliceous calcareous ooze and siliceous marl at Site 503 in the eastern equatorial Pacific. They are present below a depth of about 11 meters throughout the green-colored reduced part of the section down to 228 meters, although they are most abundant between 30 and 85 meters. They are cylindrical or barrel-shaped, up to 70 mm long, and usually have an axial channel through them or are hollow. They appear to have formed around and/or within burrows. XRD studies and microprobe analyses show that they are homogeneous and consist of calcian rhododrosite and minor calcite; Mn is present to the extent of about 30%. Isotopic analyses of the carbonate give carbon values which range from -1.2 per mil to -3.8 per mil, and oxygen isotope compositions vary from +4.0 per mil to +6.0 per mil. These values are different from those for marine-derived carbonates as exemplified by the soft sediment filling of a burrow: d13C, -0.26 per mil; d18O, +1.05 per mil. The carbon isotope data indicate that carbonate derived (possibly indirectly) from seawater was mixed with some produced by organic diagenesis to form the nodules. The d18O values suggest that although they formed near the sediment surface, some modification or the introduction of additional diagenetic carbonate occurred during burial.

Organic geochemistry of ODP Leg 135 sediment samples

The average total organic carbon (TOC) content obtained after Rock-Eval/TOC analysis of 156 sediment samples from the eight sites cored during Leg 135 is 0.05%. Hence, the TOC content of Leg 135 sediments is extremely low. The organic matter that is present in these samples is probably mostly reworked and oxidized material. Ten sediment samples were selected for extraction and analysis by gas chromatography and gas chromatography-mass spectrometry. Very low amounts of extractable hydrocarbons were obtained and some aspects of the biomarker distributions suggest that these hydrocarbons are not representative of the organic matter indigenous to the samples. A sample of an oil seep from Pili, Tongatapu was also analyzed. The seep is a biodegraded, mature oil that shows many characteristics in common with previously published analyses of oil seeps from Tongatapu. Biomarker evidence indicates that its source is a mature, marine carbonate of probable Late Cretaceous-Early Tertiary age. The source rock responsible for the Tongatapu oil seeps remains unknown.

Sulphur geochemistry of whole-rock samples from ODP Hole 176-735B

Sulfide petrography plus whole rock contents and isotope ratios of sulfur were measured in a 1.5 km section of oceanic gabbros in order to understand the geochemistry of sulfur cycling during low-temperature seawater alteration of the lower oceanic crust, and to test whether microbial effects may be present. Most samples have low SO4/Sum S values (<= 0.15), have retained igneous globules of pyrrhotite ± chalcopyrite ± pentlandite, and host secondary aggregates of pyrrhotite and pyrite laths in smectite ± iron-oxyhydroxide ± magnetite ± calcite pseudomorphs of olivine and clinopyroxene. Compared to fresh gabbro containing 100-1800 ppm sulfur our data indicate an overall addition of sulfide to the lower crust. Selection of samples altered only at temperatures <= 110 °C constrains microbial sulfate reduction as the only viable mechanism for the observed sulfide addition, which may have been enabled by the production of H2 from oxidation of associated olivine and pyroxene. The wide range in d34Ssulfide values (-1.5 to + 16.3 per mil) and variable additions of sulfide are explained by variable epsilon sulfate-sulfide under open system pathways, with a possible progression into closed system pathways. Some samples underwent oxidation related to seawater penetration along permeable fault horizons and have lost sulfur, have high SO4/Sum S (>= 0.46) and variable d34Ssulfide (0.7 to 16.9 per mil). Negative d34Ssulfate-d34Ssulfide values for the majority of samples indicate kinetic isotope fractionation during oxidation of sulfide minerals. Depth trends in sulfide-sulfur contents and sulfide mineral assemblages indicate a late-stage downward penetration of seawater into the lower 1 km of Hole 735B. Our results show that under appropriate temperature conditions, a subsurface biosphere can persist in the lower oceanic crust and alter its geochemistry.

Geochemistry of Lau Backarc Basin sediments

Major and minor (Mn, Sr, Ba, V, Cr, Ni, Co, Zn, Cu, Zr, Y, Sc) elements and mineralogic compositions were determined on bulk sediments collected during Ocean Drilling Program Leg 135. Three classes of sediment samples from holes drilled in the Lau Basin are discriminated by mineralogy and major element data. Samples labeled Class 1 are significantly enriched in biogenic calcite and occur predominantly in the northern part of the basin (Sites 834-835), whereas those of Class 3 are mostly enriched in volcanogenic material and are predominant in the central part of the basin (Sites 836-839). The minor element composition records the effects of the hydrothermal activity on the sediments. In the northern area of the basin (Sites 834-835), sedimentation is characterized by higher accumulation rates of the carbonate and hydrothermal fractions. These sediments are probably reworked predominantly, transported in the water column, and then settled locally. Thus, ponded sediments are probably responsible to this high accumulation rates. Diagenetic processes altered the volcanic material to a grade corresponding to the stability of phillipsite. In the central area of the basin (Sites 836-839), sedimentation is characterized by the action of bottom currents preferentially reworking the carbonate and hydrothermal fractions. Volcanogenic accumulation rates are greater at these sites than in the northern Lau Basin. Alteration of volcanic material is more important deeper in the holes and records authigenesis of clay rich in Fe-Mg, most likely smectite. Locally, clay minerals have apparently incorporated Cr and other ore-forming elements.

Organic geochemistry of sediments of the Gulf of California

The effects of intrusive thermal stress have been studied on a number of Pleistocene sediment samples obtained from Leg 64 of the DSDP-IPOD program in the Gulf of California. Samples were selected from Sites 477, 478 and 481 where the organic matter was subjected to thermal stress from sill intrusions. For comparison purposes, samples from Sites 474 and 479 were selected as representative of unaltered material. The GC and GC-MS data show that lipids of the thermally unaltered samples were derived from microbial and terrestrial higher-plant detritus. Samples from sill proximities were found to contain thermally-derived distillates and those adjacent to sills contained essentially no lipids. Curie point pyrolysis combined with GC and GC-MS was used to show that kerogens from the unaltered samples reflected their predominantly autochthonous microbial origin. Pyrograms of the altered kerogens were much less complex than the unaltered samples, reflecting the thermal effects. The kerogens adjacent to the sills produce little or no pyrolysis products since these intrusions into unconsolidated, wet sediments resulted in in situ pyrolysis of the organic matter. Examination of the kerogens by ESR showed that spin density and line width pass through a maximum during the course of alteration but ESR g-values show no correlation with maturity. Stable carbon isotope (d13C) values of kerogens decrease by 1-1.5 per mil near the sills at Sites 477 and 481 and the atomic N/C decreases slightly with proximity to a smaller sill at Site 478. Differences in maturation behavior between Site 477 and 481 and Site 478 are attributed to dissimilarities in thermal stress and to chemical and isotopic heterogeneity of Guaymas Basin protokerogen.

(Table 1) Geochemistry of basalts of Nauru Basin

Leg 61 of the Deep Sea Drilling Project (DSDP) was concerned with drilling a single continuously cored multiple re-entry hole at site 462 in the Central Nauru Basin (Fig. 1). Preliminary results of this drilling, which penetrated more than 1 km beneath the sea floor, were presented earlier. One major result was the discovery of a late Cretaceous off-ridge volcanic/intrusive complex of basaltic composition and great thickness (>500 m). We now present trace element abundance data for these basalts. Results of the drilling provide further support for a relatively long-lived thermal and magmatic event in the late Cretaceous resulting in voluminous and widespread magmatism in the central and western Pacific consistent with earlier suggestions. The trace element data show that most of the rocks produced during this event have trace element characteristics intermediate between those of normal and transitional mid-ocean ridge basalts (N- and T-type MORB) and different from Hawaiian basalts. These results indicate that basalts which are depleted in light rare earth elements (LREE) relative to the heavy REE may, in certain conditions, be erupted as voluminous intra-plate eruptions far from active ridge crests.

Mineralogy and geochemistry of weathered serpentinites in DSDP Leg 84 sediments

At Sites 566, 567, and 570 of Leg 84, ophiolitic serpentinite basement was covered by a sequence of serpentinitic mud that was formed by weathering of the serpentinites under sea- or pore-water conditions. Several mineralogical processes were observed: (1) The serpentinitic mud that consists mainly of chrysotile was formed from the lizardite component of the serpentinites by alteration. (2) Slightly trioctahedral smectites containing nonexpandable mica layers, trioctahedral smectites containing nonexpandable chlorite layers, and swelling chlorites were presumably formed from detrital chlorite and/or serpentine. (3) The occurrence of tremolite, chlorite, analcime, and talc can be attributed to reworking of gabbroic ophiolite rocks. (4) Dolomite, aragonite, and Mg-calcite, all authigenic, occur in the serpentinitic mud.