Effect of Solvent-Induced Coil to Helix Conformational Change on the Two-Photon Absorption Spectrum of Poly(3,6-phenanthrene)

This paper investigates the effect of solvent-induced conformational changes of poly(3,6-phenanthrene) on their two-photon absorption (2PA). Such effect was studied employing the wavelength-tunable femtosecond Z-scan technique and modeled using the sum-over-essential states approach. We observed a strong reduction of the 2PA cross-section when the sample was prepared in hexane (poor solvent) in comparison to chloroform (good solvent), which is related to the conformation adopted by the polymer in each case. In chloroform it adopts a random coil conformation, as opposed to the one-handed helix conformation in hexane. Our results pointed out that the coil to helix conformation change decreases the degree of molecular planarity of the polymer pi-conjugated backbone, which is primarily responsible for their optical nonlinearity, contributing to diminishing the effective transition dipole moments and, consequently, the 2PA cross-section. Moreover, by studying the nonlinear response with different light polarization, we showed that, although the solvent-induced conformational change does not alter the molecular symmetry of the polymer, it modifies considerably the direction of the transition dipole moments between the excited states.

Sequential Methyl-Fluorine Exchange Reactions of Siloxide Ions in the Gas Phase

Air Force Office of Scientific Research (AFOSR)

Design of laminated piezocomposite shell transducers with arbitrary fiber orientation using topology optimization approach

Sensor and actuator based on laminated piezocomposite shells have shown increasing demand in the field of smart structures. The distribution of piezoelectric material within material layers affects the performance of these structures; therefore, its amount, shape, size, placement, and polarization should be simultaneously considered in an optimization problem. In addition, previous works suggest the concept of laminated piezocomposite structure that includes fiber-reinforced composite layer can increase the performance of these piezoelectric transducers; however, the design optimization of these devices has not been fully explored yet. Thus, this work aims the development of a methodology using topology optimization techniques for static design of laminated piezocomposite shell structures by considering the optimization of piezoelectric material and polarization distributions together with the optimization of the fiber angle of the composite orthotropic layers, which is free to assume different values along the same composite layer. The finite element model is based on the laminated piezoelectric shell theory, using the degenerate three-dimensional solid approach and first-order shell theory kinematics that accounts for the transverse shear deformation and rotary inertia effects. The topology optimization formulation is implemented by combining the piezoelectric material with penalization and polarization model and the discrete material optimization, where the design variables describe the amount of piezoelectric material and polarization sign at each finite element, with the fiber angles, respectively. Three different objective functions are formulated for the design of actuators, sensors, and energy harvesters. Results of laminated piezocomposite shell transducers are presented to illustrate the method. Copyright (C) 2012 John Wiley & Sons, Ltd.

Fotogrametria na identificação de assimetrias posturais em cadetes e pilotos da academia da força aérea brasileira

OBJETIVO: Identificar se a atividade de treino de voo pode desencadear alterações posturais em cadetes e pilotos da Academia da Força Aérea Brasileira (AFA). MÉTODOS: Os sujeitos foram avaliados por meio de registro fotográfico em vista anterior e lateral direita, tendo como casuística 80 cadetes da AFA, divididos em quatro grupos, 20 em cada, e 15 pilotos do Esquadrão de Demonstração Aérea (EDA), formando o quinto grupo. As fotos foram transferidas para o Software de Avaliação Postural (SAPO), sendo traçados ângulos relacionados ao alinhamento vertical da cabeça (AVC), alinhamento horizontal da cabeça (AHC), alinhamento horizontal dos acrômios (AHA) e alinhamento horizontal das espinhas ilíacas ântero-superiores (AHE). RESULTADOS: Os resultados mostraram que, após comparação das médias das assimetrias posturais entre os grupos, não houve diferença estatisticamente significante em relação aos ângulos AVC, AHC e AHA. No entanto, na variável AHE, observou-se que o grupo de pilotos apresentou valores significativamente menores que os dos cadetes, sugerindo maior estabilidade postural em relação a essa variável. CONCLUSÃO: O AHE foi a única medida que apresentou diferença estatisticamente significate na comparação entre os pilotos e cadetes dos diferentes anos. Quanto aos demais alinhamentos, não houve diferença, podendo atribuir esse fato aos critérios exigentes de ingresso dos cadetes na AFA e a eficiência do treinamento físico realizado periodicamente.

Feasibility study of performing high precision gamma spectroscopy of lambda lambda hypernuclei in the PANDA experiment

Hypernuclear physics is currently attracting renewed interest, due tornthe important role of hypernuclei spectroscopy rn(hyperon-hyperon and hyperon-nucleon interactions) rnas a unique toolrnto describe the baryon-baryon interactions in a unified way and to rnunderstand the origin of their short-range.rnrnHypernuclear research will be one of the main topics addressed by the {sc PANDA} experimentrnat the planned Facility for Antiproton and Ion Research {sc FAIR}.rnThanks to the use of stored $overline{p}$ beams, copiousrnproduction of double $Lambda$ hypernuclei is expected at thern{sc PANDA} experiment, which will enable high precision $gamma$rnspectroscopy of such nuclei for the first time.rnAt {sc PANDA} excited states of $Xi^-$ hypernuclei will be usedrnas a basis for the formation of double $Lambda$ hypernuclei.rnFor their detection, a devoted hypernuclear detector setup is planned. This setup consists ofrna primary nuclear target for the production of $Xi^{-}+overline{Xi}$ pairs, a secondary active targetrnfor the hypernuclei formation and the identification of associated decay products and a germanium array detector to perform $gamma$ spectroscopy.rnrnIn the present work, the feasibility of performing high precision $gamma$rnspectroscopy of double $Lambda$ hypernuclei at the {sc PANDA} experiment has been studiedrnby means of a Monte Carlo simulation. For this issue, the designing and simulation of the devoted detector setup as well as of the mechanism to produce double $Lambda$ hypernuclei have been optimizedrntogether with the performance of the whole system. rnIn addition, the production yields of double hypernuclei in excitedrnparticle stable states have been evaluated within a statistical decay model.rnrnA strategy for the unique assignment of various newly observed $gamma$-transitions rnto specific double hypernuclei has been successfully implemented by combining the predicted energy spectra rnof each target with the measurement of two pion momenta from the subsequent weak decays of a double hypernucleus.rn% Indeed, based on these Monte Carlo simulation, the analysis of the statistical decay of $^{13}_{Lambda{}Lambda}$B has been performed. rn% As result, three $gamma$-transitions associated to the double hypernuclei $^{11}_{Lambda{}Lambda}$Bern% and to the single hyperfragments $^{4}_{Lambda}$H and $^{9}_{Lambda}$Be, have been well identified.rnrnFor the background handling a method based on time measurement has also been implemented.rnHowever, the percentage of tagged events related to the production of $Xi^{-}+overline{Xi}$ pairs, variesrnbetween 20% and 30% of the total number of produced events of this type. As a consequence, further considerations have to be made to increase the tagging efficiency by a factor of 2.rnrnThe contribution of the background reactions to the radiation damage on the germanium detectorsrnhas also been studied within the simulation. Additionally, a test to check the degradation of the energyrnresolution of the germanium detectors in the presence of a magnetic field has also been performed.rnNo significant degradation of the energy resolution or in the electronics was observed. A correlationrnbetween rise time and the pulse shape has been used to correct the measured energy. rnrnBased on the present results, one can say that the performance of $gamma$ spectroscopy of double $Lambda$ hypernuclei at the {sc PANDA} experiment seems feasible.rnA further improvement of the statistics is needed for the background rejection studies. Moreover, a more realistic layout of the hypernuclear detectors has been suggested using the results of these studies to accomplish a better balance between the physical and the technical requirements.rn

The Amplifier - v. 2, no. 1

In this issue...Marcus Daly, Student Council, City Reservoir, Butte, Montana, Leonard Mine, Stanolind Oil Company, Air Force, Margaret Rosencrans

The Amplifier - v. 3, no. 4

In this issue...Dr. Van Pelt, Anderson-Carlisle Society, Rose Garden Party, Main Hall, Gordon Parker, Magma Yearbook, Berkley Open Pit, Malmstrom Air Force Base

The Amplifier - v. 4, no. 7

In this issue...Ski Club, Moshe Sheinkin, Dale E. Pickney, Coach Forest 'Frosty' Cox, Air Force, Masquerade Ball, Silver Bow Creek, Butte, Montana

The Amplifier - v. 4, no. 13

In this issue...Wesley Salonen, M-Club, the Anaconda Company, Coach Ed Simonich, Mining Association of Montana, Copper Guards, Engineering Day

Legislative Legacy: Big Changes in Legislative Article of 1972 Constitution -- Jerry Loendorf, Arlyne Reichert & Rich Bechtel “In the Crucible of Change”

The fulcrum upon which were leveraged many of the dramatic progressive changes in Montana that are documented "In the Crucible of Change" series was the lead up to, preparation, writing and adoption of the 1972 Montana Constitution. As Montana citizens exhibited their concern over the dysfunctional state government in MT under its 1889 Constitution, one of the areas that stood out as needing serious change was the Montana Legislature. Meeting for only sixty calendar days every two years, the Legislature regularly tried to carry off the subterfuge of stopping the wall clock at 11:59 PM on the sixtieth day and placing a shroud over it so they could continue to conduct business as if it were still the 60th day. Lawyers hired by the Anaconda Company drafted most bills that legislators wanted to have introduced. Malapportionment, especially in the State Senate where each county had one Senator regardless of their population, created a situation where Petroleum County with 800 residents had one senator while neighboring Yellowstone County with 80,000 people also had one senator -- a 100-1 differential in representation. Reapportionment imposed by rulings of the US Supreme Court in the mid-1960s created great furor in rural Montana to go along with the previous dissatisfaction of the urban centers. Stories of Anaconda Company “thumbs up – thumbs down” control of the votes were prevalent. Committee meeting and votes were done behind closed doors and recorded votes were non-existent except for the nearly meaningless final tally. People were in the dark about the creation of laws that affected their daily lives. It was clear that change in the Legislature had to take the form of change in the Constitution and, because it was not likely that the Legislature would advance Constitutional amendments on the subject, a convention seemed the only remedy. Once that Convention was called and went to work, it became apparent that the Legislative Article provided both opportunity for change and danger that too dramatic a change might sink the whole new document. The activities of the Legislative Committee and the whole Convention when acting upon Legislative issues provides one of the more compelling stories of change. The story of the Legislative Article of the Montana Constitution is discussed in this episode by three major players who were directly involved in the effort: Jerry Loendorf, Arlyne Reichert and Rich Bechtel. Their recollections of the activities surrounding the entire Constitutional Convention and specifically the Legislative Article provide an insider’s perspective of the development of the entire Constitution and the Legislative portion which was of such a high degree of interest to the people of Montana during the important period of progressive change documented “In the Crucible of Change.” Jerry Loendorf, who served as Chair of the Legislative Committee at the 1972 Montana Constitutional Convention, received a BA from Carroll College in 1961 and a JD from the University of Montana Law School in 1964. Upon graduation he served two years as a law clerk for the Montana Supreme Court after which he was for 34 years a partner in the law firm of Harrison, Loendorf & Posten, Duncan. In addition to being a delegate to the Constitutional Convention, Jerry served on the Board of Labor Appeals from 2000 to 2004. He was designated a Montana Special Assistant Attorney General to represent the state in federal court on the challenge to the results of the ratification election of Montana's Constitution in 1972. Jerry served on the Carroll College Board of Directors in the late 1960s and then again as a member of the Board of Trustees of Carroll College from 2001 to 2009. He has served on the Board of Directors of the Rocky Mountain Development Council since 1970 and was on the board of the Helena YMCA from 1981 to 1987. He also served on the board of the Good Samaritan Ministries from 2009 to 2014. On the business side, Jerry was on the Board of Directors of Valley Bank to Helena from 1980 to 2005. He is a member of the American Bar Association, State Bar of Montana, the First Judicial District Bar Association, and the Montana Trial Lawyers Association. Carroll College awarded Jerry the Warren Nelson Award 1994 and the Insignias Award in 2007. At Carroll College, Jerry has funded the following three scholarship endowments: George C and Helen T Loendorf, Gary Turcott, and Fr. William Greytek. Arlyne Reichert, Great Falls Delegate to the Constitutional Convention and former State Legislator, was born in Buffalo, NY in 1926 and attended University of Buffalo in conjunction with Cadet Nurses Training during WWII. She married a Montanan in Great Falls in 1945 and was widowed in 1968. She is mother of five, grandmother of seven, great-grandmother of four. Arlyne was employed by McLaughlin Research Institute in Great Falls for 23 years, serving as Technical Editor of Transplantation Journal in 1967, retiring as Assistant Director in 1989. In addition to being a state legislator (1979 Session) and a delegate to the 1972 Montana Constitutional Convention, she has filled many public roles, including Cascade County Study Commissioner (1974), MT Comprehensive Health Council, US Civil Rights Commission MT Advisory Committee, MT Capitol Restoration Committee, and Great Falls Public Library Trustee. Arlyne has engaged in many non-profit activities including League of Women Voters (State & Local Board Officer – from where her interest in the MT Constitutional change developed), Great Falls Public Radio Association (President & Founder), American Cancer Society (President Great Falls Chapter), Chair of MT Rhodes Scholarship Committee, and Council Member of the National Civic League. She also served a while as a Television Legislative Reporter. Arlyne has been recipient of numerous awards, the National Distinguished Citizens Award from the National Municipal League, two Women of Achievement Awards from Business & Professional Women, the Salute to Women Award by YWCA, Heritage Preservation Award from Cascade County Historical Society and the State of Montana, and the Heroes Award from Humanities Montana. She remains active, serving as Secretary-Treasurer of Preservation Cascade, Inc., and as Board Member of the McLaughlin Research Institute. Her current passion is applied to the preservation/saving of the historic 10th Street Bridge that crosses the Missouri River in Great Falls. Rich Bechtel of Helena was born in Napa, California in 1945 and grew up as an Air Force brat living in such places as Bitberg, Germany, Tripoli, Libya, and Sevilla, Spain. He graduated from Glasgow High School and the University of Montana. Rich was a graduate assistant for noted Montana History professor Professor K. Ross Toole, but dropped out of graduate school to pursue a real life in Montana politics and government. Rich has had a long, varied and colorful career in the public arena. He currently is the Director of the Office of Taxpayer Assistance & Public Outreach for MT’s Department of Revenue. He previously held two positions with the National Wildlife Federation in Washington, DC (Sr. Legislative Representative [1989-91] and Sr. Legislative Representative for Wildlife Policy [2004-2006]). While in Washington DC, he also was Assistant for Senator Lee Metcalf (D-MT), 1974-1976; Federal-State Coordinator for State of Montana, 1976-1989; Director of the Western Governors’ Association Washington Office, 1991-2000; and Director of Federal Affairs for Governor Kitzhaber of Oregon, 2001- 2003. Earlier in Montana Government, between 1971 and 1974, Rich was Research Analyst for MT Blue Ribbon Commission on Postsecondary Education, Legislative Consultant and Bill Drafter for MT Legislative Council, Research Analyst for the MT Constitutional Convention Commission where he provided original research on legislatures, as well as Researcher/Staff for the MT Constitutional Convention Legislative Committee, from where he drafted the various provisions of the Legislative Article and the majority and minority reports on behalf of the Committee members. Rich has represented Montana’s Governor on a trade and cultural mission to Republic of China and participated in US-German Acid Rain Committee sessions in Germany and with European Economic Community environmental officials in Belgium. He is married to Yvonne Seng (Ph.D.) - T’ai Chi apprentice; author and birder.

The Amplifier - v. 6, no. 14

In this issue...Copper Lounge, Union Pacific Railway, Air Force, Circle K Club, Petroleum Engineers, Montana Power Company, Historical Geology Field Trip, Lime Spur Quarry

The Amplifier - v. 7, no. 4

In this issue...Maimstrom Air Force Base, Newman Club, Coach Ed Simonich, Harvest Ball, glaciers, New York Stock Exchange, Montana Power, Christmas, Bill Tiddy

The Amplifier - v. 7, no. 7

In this issue...Len Waters, Circle K Club, Max Kert, Air Force, Stanley Eugene Bosch, Wesley Club, Engineer's week, toboggan party, Butte Central, Anaconda High School

The Amplifier - v. 9, no. 7

In this issue...United States Air Force Academy, ASARCO, Butte Civic Orchestra, International club, IT Club, Montana Oil and Gas Conservation Commision

Evaluation of different types of enamel conditioning before application of a fissure sealant

The aim of the study was to compare fissure sealant quality after mechanical conditioning of erbium-doped yttrium aluminium garnet (Er:YAG) laser or air abrasion prior to chemical conditioning of phosphoric acid etching or of a self-etch adhesive. Twenty-five permanent molars were initially divided into three groups: control group (n = 5), phosphoric acid etching; test group 1 (n = 10), air abrasion; and test group 2, (n = 10) Er:YAG laser. After mechanical conditioning, the test group teeth were sectioned buccolingually and the occlusal surface of one half tooth (equal to one sample) was acid etched, while a self-etch adhesive was applied on the other half. The fissure system of each sample was sealed, thermo-cycled and immersed in 5% methylene dye for 24 h. Each sample was sectioned buccolingually, and one slice was analysed microscopically. Using specialized software microleakage, unfilled margin, sealant failure and unfilled area proportions were calculated. A nonparametric ANOVA model was applied to compare the Er:YAG treatment with that of air abrasion and the self-etch adhesive with phosphoric acid (α = 0.05). Test groups were compared to the control group using Wilcoxon rank sum tests (α = 0.05). The control group displayed significantly lower microleakage but higher unfilled area proportions than the Er:YAG laser + self-etch adhesive group and displayed significantly higher unfilled margin and unfilled area proportions than the air-abrasion + self-etch adhesive group. There was no statistically significant difference in the quality of sealants applied in fissures treated with either Er:YAG laser or air abrasion prior to phosphoric acid etching, nor in the quality of sealants applied in fissures treated with either self-etch adhesive or phosphoric acid following Er:YAG or air-abrasion treatment.