Influence of the type of coarse lightweight aggregate on properties of Semi-Lightweight Self-Consolidating Concrete

This paper presents studies on the properties of fresh and hardened semilightweight self-consolidating concrete (SLWSCC) mixtures, produced with two types of manufactured coarse lightweight aggregates (LWA) and normal weight sand. The first type, a sintered pulverized fuel ash, was made from an industrial by-product, fly ash, whereas the second one, an expanded clay, was produced from a naturally sourced clay. For all mixtures, normal weight sand was used as a fine fraction of aggregates, and the portland cement was partially replaced with a limestone powder. The SLWSCC was produced with different water presaturation regimes of the LWAs. The desired initial slump-flow spread was set between 700 and 800 mm. The effect of three superplasticizers was evaluated by testing properties of SLWSCC, normal weight SCC, and paste mixtures. Three SCC fresh properties were measured: the slump-flow, the V-funnel flow time, and the J-ring blocking step. Moreover, the slump-flow loss was evaluated. The degree of segregation was assessed in both fresh and hardened states. Additionally, the hardened density and the compressive strengths were tested. All SLWSCC mixtures were produced with a desired range of slump-flow spread and with satisfactory passing ability assessed with the J-ring test. SLWSCCs prepared with the expanded clay LWA were less sensitive to the variation of water presaturation levels and showed lower viscosity than those made with the sintered pulverized fuel ash LWA. Only mixtures containing SP-3 superplasticizer showed acceptable workability loss resistance. The saturated surface-dry density of all of the mixtures varied in a range of 2,025–2,125??kg/m 3 . Mixtures containing 29% of coarse LWAs and 71% of sand (by mass) had 24-h and 28-day compressive strengths above 20 and 40 MPa, respectively, but the mixtures made with the expanded clay were slightly weaker.

Between Order and Modernity: Resurgence Planning in Revolutionary Egypt

Egypt’s Revolution of 1952 presented a major historical change to its political and economic structure, its society, and its institutions. This paper examines how Nasser’s regime operated through the state apparatus to exhibit features of modernity. Under the pretext of modernization, renovating Cairo’s authentic urban fabric was one of the channels that displayed the new ambitions to unveil a centralized system of governance and ideologies of socialism. The paper particularly looks at the city’s resurgence attempts, promoted by upgrading practices that displayed Western ideals of planning. Eventually, the contradictory planning legislative system introduced by the government raised early alarms at the problems encountered in the planning institution that was not only unable to liberate Cairo’s urban districts from its long-rooted decay, but also struggled to implement the regime’s flagship policy of social justice in a context wherein it was much needed.

The relationship between spatial planning and economic competitiveness: the ‘path to economic nirvana’ or a ‘dangerous obsession’?

This paper offers a contribution to contemporary studies of spatial planning. In particular, it problematises the relationship between neoliberal competitiveness and spatial planning. Neoliberal competitiveness is a hegemonic discourse in public policy as it (allegedly) provides the ‘path to economic nirvana’. However, commentators have critiqued its theoretical underpinnings and labelled it a ‘dangerous obsession’ for policy makers. Another set of literatures argues that spatial planning can be understood as a form of ‘neoliberal spatial governance’ and read in a ‘postpolitical’ framework that ‘privileges competitiveness’. Synthesising these debates this paper critically analyses the application and operationalisation of neoliberal competitiveness in Northern Ireland and Belfast. In focusing on this unique case study—a deeply divided society with a turbulent history—the paper takes the debate forward in arguing that rather than offering the ‘path to economic nirvana’ neoliberal competitiveness is a ‘postpolitical strategy’ and represents a ‘dangerous obsession’ for spatial planning.

Accessibility and Health: Towards Walkability Tools for Planning Practice

There is increasing research interest in how we can most effectively intervene in the built environment to change behaviours such as physical activity and improve health. Much of this work has focussed around the concept of walkability and the identification of those attributes of our cities that encourage pedestrian activity, including density, connectivity and the aesthetic of the urban realm (Saelens et al 2003, Frank et al 2010). Much of the existing research has clarified the strength of the relationships between various environmental attributes and the differential impact on different demographic groups (e.g. Panter et al 2011). This has not yet been effectively translated into tools to help integrate the concepts of walkability into decision-making by statutory authorities that can help shape the spatial development and delivery of public services which can support more active lifestyles. A key reason for this has been that standard models for transport planning and accessibility are based on networks of road infrastructure, which provides a weak basis for modelling pedestrian accessibility (Chin et al 2008).

This paper reports the findings of Knowledge Exchange project funded by UK’s Economic and Social Research Council (ES/J010588/1) and partners including Belfast and Derry City Councils and Northern Ireland’s Public Health Agency, the Department of Regional Development and Belfast Healthy Cities, that has attempted to address this problem. This project has mapped city-wide footpath networks and used these to assist partner organisations in developing the evidence base for making decisions on public services based on health impacts and pedestrian access. The paper describes the tool developed, uses a number of examples to highlight its impact on areas of decision-making and evaluates the benefits of further integrating walkability into planning and development practice.

Planning for Renewable Energy: Lessons from the UK’s Devolved Administrations

The planning system has been put forward as a key element in facilitating the low carbon transition (Bulkeley 2006, While 2008), by reducing carbon footprints through initiatives such as encouraging less-energy intensive development, reducing the need to travel or promoting sustainable forms of transport. It has also played a key role on encouraging a shift to more renewable sources of energy, through establishing the spatial ‘rules’ for its regulation, consenting of specific projects and acting as the key arena for mediating a range of social concerns over the resulting socio-technical shift. Despite having this key facilitative role, planning is also regularly seen as a key impediment to renewables, particularly on-shore wind (Ellis et al 2009). There is however, little known about what makes the ‘best’ approach to planning for renewables and indeed little discussion on how to judge the effectiveness of a planning regime for this issue – is it one that maximises generating capacity, protects or landscapes or biodiversity, or perhaps one that maximises social acceptance of renewable developments?

The UK offers a useful context for exploring these issues, with its four main territories (England, Northern Ireland, Scotland and Wales) having broadly similar institutional arrangements, but autonomy over spatial planning during the period in which renewables expanded across the landscape. Each of these jurisdictions has sought to use their planning system to encourage renewables with subtlety different discourses, regulations and spatial strategies. Such an ‘experiment’ offers some important insight into what ‘works’.

This paper will draw on a two year study funded by the UK’s Economic and Social Research Council (RES-062-23-2526), which has charted the effects of devolved administrations on policy and delivery of renewable energy from 1990 to 2012. Drawing on more than 80 interviews, documentary analysis and secondary data sources it describes the growth of renewable capacity in each jurisdiction, explores the spatial strategies adopted and analyses the way in which the broader institutional frameworks in which planning for renewables has emerged. The paper uses this analysis to consider the lessons that can be drawn from the comparable experience of the devolved administrations in the UK and points to the ways in which we should evaluate the effectiveness of planning regimes for renewable energy.

Evidence and Spatial Planning for Sustainable Development: A Model for Spatially Allocating Material Flows

The aspiration the spatial planning should act as the main coordinating function for the transition to a sustainable society is grounded on the assumption that it is capable of incorporating both a strong evidence base of environmental accounting for policy, coupled with opportunities for open, deliberative decision-making. While there are a number of increasingly sophisticated methods (such as material flow analysis and ecological footprinting) that can be used to longitudinally determine the impact of policy, there are fewer that can provide a robust spatial assessment of sustainability policy. In this paper, we introduce the Spatial Allocation of Material Flow Analysis (SAMFA) model, which uses the concept of socio-economic metabolism to extrapolate the impact of local consumption patterns that may occur as a result of the local spatial planning process at multiple spatial levels. The initial application the SAMFA model is based on County Kildare in the Republic of Ireland, through spatial temporal simulation and visualisation of construction material flows and associated energy use in the housing sector. Thus, while we focus on an Ireland case study, the model is applicable to spatial planning and sustainability research more generally. Through the development and evaluation of alternative scenarios, the model appears to be successful in its prediction of the cumulative resource and energy impacts arising from consumption and development patterns. This leads to some important insights in relation to the differential spatial distribution of disaggregated allocation of material balance and energy use, for example that rural areas have greater resource accumulation (and are therefore in a sense “less sustainable”) than urban areas, confirming that rural housing in Ireland is both more material and energy intensive. This therefore has the potential to identify hotspots of higher material and energy use, which can be addressed through targeted planning initiatives or focussed community engagement. Furthermore, due to the ability of the model to allow manipulation of different policy criteria (increased density, urban conservation etc), it can also act as an effective basis for multi-stakeholder engagement.

Anticipatory Planning Reveals Segmentation of Cortical Motor Output During Action Observation

It has been argued that the variation in brain activity that occurs when observing another person reflects a representation of actions that is indivisible, and which plays out in full once the intent of the actor can be discerned. We used transcranial magnetic stimulation to probe the excitability of corticospinal projections to 2 intrinsic hand muscles while motions to reach and grasp an object were observed. A symbolic cue either faithfully indicated the required final orientation of the object and thus the nature of the grasp that was required, or was in conflict with the movement subsequently displayed. When the cue was veridical, modulation of excitability was in accordance with the functional role of the muscles in the action observed. If however the cue had indicated that the alternative grasp would be required, modulation of output to first dorsal interosseus was consistent with the action specified, rather than the action observed-until the terminal phase of the motion sequence during which the object was seen lifted. Modulation of corticospinal output during observation is thus segmented-it progresses initially in accordance with the action anticipated, and if discrepancies are revealed by visual input, coincides thereafter with that of the action seen.