Equação de predição da exigência de proteína bruta para aves reprodutoras pesadas na fase de produção

O objetivo do presente trabalho foi determinar as exigências de proteína para aves reprodutoras pesadas através do método fatorial. A exigência de proteína bruta para mantença (PBm) foi determinada por intermédio da técnica do balanço de nitrogênio por meio de ensaio de metabolismo com aves submetidas a quatro dietas com níveis decrescentes de proteína, proporcionando balanço positivo, próximo a zero e negativo. Para determinar a exigência de proteína bruta para o ganho de peso (PBg) dois experimentos foram conduzidos, sendo que em um, determinou-se as exigências líquidas de nitrogênio e no outro, a eficiência de utilização do nitrogênio para o ganho, por meio de abates semanais de aves no período de 26 a 33 semanas de idade. A exigência de proteína bruta para produção de ovos (PBo) foi determinada através de análises semanais de proteína bruta dos ovos coletados, no período de 31 a 37 semanas de idade, considerando a eficiência de deposição da proteína no ovo. A exigência e eficiência de utilização da proteína para mantença foram 2.282 mg PB/kg0,75/dia e 60,79%; respectivamente. As exigências de PBg e PBo determinadas foram: 356 mg PB/g e 262 mg PB/g, respectivamente, e as eficiências de utilização do nitrogênio, 40 e 46,80%, respectivamente. A equação de predição elaborada para aves reprodutoras pesadas na fase de produção foi: PB=2,282.P0,75+0,356.G+0,262.MO, onde PB é a exigência de proteína bruta (g/ave/dia), P o peso corporal (kg), G o ganho de peso (g/dia) e MO a massa de ovos (g/dia).

Desempenho produtivo de vacas de quatro grupos genéticos submetidas a diferentes manejos alimentares desmamadas aos 42 ou 63 dias pós-parto

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ferroelectric phase transition in Pb0.60Sr0.40TiO3 thin films

Polycrystalline Pb-0.Sr-60(0).40TiO3 thin films with the tetragonal perovskite structure were grown on platinum-coated silicon substrates by a chemical method. Raman results reveal that A1 (1 TO) symmetry modes, also known as soft modes, persist above the phase transition 14 temperature. This is due to the high structural distortion caused by the substitution effect of Sr2+ for Pb2+ ions. In contrast, the E(1TO) symmetry mode vanishes at 498 K, characterizing the ferroelectric-paraelectric transition phase. However, the Raman spectra, as a function of temperature, reveal that the ferroelectric-paraelectric phase transition may be correlated with a diffuse phase transition. The experimental data obtained from measurements of the dielectric constant as a function of temperature and frequencies showed a classical behavior of ferroelectric phase transition in Pb-0.Sr-60(0).40TiO3 thin films, rather than a relaxor ferroelectric phase transition. (C) 2004 Elsevier B.V. All rights reserved.

Avaliação da vinhaça líquida em substituição à água na terminação de bovinos em confinamento 2. Parâmetros etológicos e perfil metabólico

Fifteen animals from Canchim group and fifteen from Nelore were observed in the following treatments: water (A), molasses soluble + magnesium oxide (V) and molasses soluble + magnesium oxide + sodium bicarbonate (V+B). They were observed during continuous 24 hours every 30 days up to 90 days periods. During the weighting, every 28 days blood samples were collected to determine metabolic outline. Treatments did not affect (P>.05) animal behaviour on metabolic and the obtained mean values were within the normal range. They were, respectively for Canchim and Nelore: Feeding 270 and 223 minutes; Rumination 374 and 356 minutes; Idleness 745 and 863 minutes; Glicose 86 and 88 mg/dl; Urea 10 and 23 mg/dl: Uric acid 1,3 and 1,2 mg/dl; Total protein 7,0 and 6,8 g/dl; Albumin 3,1 and 3,1 g/dl; Creatinin 1,5 and 1,6 mg/dl; Sodium 140 and 142 meq/dl; Potassium 4,2 and 4,3 meq/1 and Calcium 10,0 and 9,8 mg/dl. It was concluded that molasses soluble as a substitute of water has not changed the ethologic parameters neither metabolic outline of both genetic group when in finishing feedlot.

On the hardy space H¹ on products of half-spaces

We show that the Hardy space H¹ anal (R2+ x R2+) can be identified with the class of functions f such that f and all its double and partial Hubert transforms Hk f belong to L¹ (R2). A basic tool used in the proof is the bisubharmonicity of |F|q, where F is a vector field that satisfies a generalized conjugate system of Cauchy-Riemann type.

DISTRIBUTION OF DIFFERENT FIBER TYPES OF M-EXTENSOR CARPI RADIALIS LONGUS OF THE RAT

As revealed by the NADH-diaphorase and myosine ATPase, the M. extensor carpi radialis longus of the rat possesses at least 3 main kinds of fibres, with different distribution on the superficial and deep portions of the muscle. The superficial portion revealed that 67.68 % are FG (fast-twitch-glycolytic) fibres, 14.72 % are FOG (fast-twitch-oxidative) fibres and 17.60 % are SO (slow-twitch-glycolytic) fibres. Already the deep portion revealed that 71.29 % are SO (slow-twitch-glycolytic) fibres, 17.46 % are FOG (fast-twitch-oxidative-glycolytic) fibres and 11.25 % are FG (fast-twitch-glycolytic) fibres. The miosine ATPase reaction was used to demonstrate contracting characteristics. These findings suggest that the movements of fast contraction of the M. extensor carpi radialis longus are predominant.

Morphological analysis of pits formed on Al 2024-T3 in chloride aqueous solution

It has been used a new image analysis method, based on segmentation by shape parameters, for pits morphology examination from Al 2024 aluminum-copper alloy in chloride aqueous solution. Corrosion behavior of this alloys in naturally aerated 3.5% NaCl solution has been investigated through open circuit potential measurements. Afterwards, pits have been characterized by image analysis taking density and size measurements right from corroded surfaces. Morphological investigation has been conducted for profiles, cut orthogonally from mean surface planes, and observed through light microscopy. Image analysis data could demonstrate that pits are wider than deep, evoluting for conical, quasi-conical or irregular shapes. Most pits have presented a quasi-conical morphology, but the wider ones have evoluted to an irregular shape influenced by sub-surface microstructure. Image analysis based on shape segmentation could enhance the differences on morphological behavior. (C) 2004 Elsevier B.V. All rights reserved.

Annealing effects on optical properties of natural alexandrite

Natural alexandrite (BeAl2O4:Cr3+) crystals are investigated as regards the effects of annealing on their optical properties. Optical absorption spectra are measured from the ultraviolet (190 nm) to the near infrared (900 nm), for a sample subjected to consecutive annealing processes, where time and temperature are varied. Besides this, luminescence spectra are simultaneously obtained for this sample, excited with a Kr+ laser source, tuned on an ultraviolet multi-line mode (337.5, 350.7 and 356.4 nm). We observe from absorption as well as from emission data that annealing mainly influences the distribution of Cr3+ and Fe3+ ions, located on sites of a mirror plane (C-s symmetry), which are responsible for the optical properties of alexandrite. The results obtained lead to the conclusion that annealing induces a modification of the population of Cr3+ on C-s sites as well as on sites located on an inversion plane (C-i). Annealing could improve the optical properties of this material, as regards its application as a tunable laser.

Inversion polymorphism in laboratory strains and natural samples of Drosophila sturtevanti (saltans group, sturtevanti subgroup)

Drosophila sturtevanti (37 strains) showed eighteen inversions, five new and thirteen previously described. Among these strains, 24 were maintained for seven to 21 years under laboratory conditions, eight for less than 1 year, and six were natural samples analysed in the first generation after collection. Flies from natural samples were the most polymorphic in the number of different inversions as well as in the frequency of flies bearing heterozygous inversions. In all cases, chromosome III presented the greatest number of inversions, and most of them occurred in strains from the Amazonian region. The data obtained were consistent with the hypothesis that the inversion variability of a species is proportional to the variability of its habitats.

Reproductive compatibility and chromosome pairing in the Drosophila buzzatii complex

Fertility (percentage of fertile crosses) and the degree of synapsis in salivary gland chromosomes in isofemale lines of Drosophila buzzatii, D. serido, D. koepferae and D. seriema were analysed. D. buzzatii was completely sterile in intercrosses with strains from the other species except for D. koepferae. The other species intercrossed to a greater or lesser degree, but also differed between crossing directions. Homologous pairing in salivary gland preparations of strains and hybrids conformed with the data on fertility. The lowest degree of synapsis was present in hybrids between D. koepferae and D. buzzatii, D. seriema and D. koepferae and D. koepferae and D. serido. These species also exhibited the lowest degree of reproductive compatibility. Hybrids between D. seriema and D. serido showed an intermediate degree of synapsis (pairing absent in the proximal and distal chromosome ends), as well as fertility greater than that found in the other interspecific crosses. Results of the fertility of crosses involving strains of a single species, compared with data in the literature, indicated that intraspecific divergence occurred in D. serido and D. koepferae.

Cytogenetic studies on holocentric chromosomes of five species of triatomines (Heteroptera: Reduviidae)

The chromosome number and meiotic cycle of triatomines were investigated. All five species presented the same diploid chromosome number, 2n = 22 (20A + XY in the male). Phylogenetic relationships based on chromosomal evidence and C-banded karyotypes in the subfamily are discussed. It is suggested that differences in DNA content are mainly due to variations in the amount of C-heterochromatin, which may be interpreted as loss and/or gain of C-regions. This interpretation is supported by the presence of meiotic and mitotic chromocentres which facilitate the transfer of C-positive material.

Analysis of the Stayability in Milk Buffaloes using Survival Models

In this study the trait Stayability (SA) was evaluated according to the year of cull after first calvin, i.e., SA 1 to 6 for 1 to 6 years from first calving in lactating females from bubaline milk herds spread in nine farms located in São Paulo state. Informations were used regarding 1027 lactating Murrah breed buffaloes. The statistical analyses were made using LIFEREG (SAS, 1999) procedure. The SA was evaluated using the fixed effects: farm production, birth year, calving season (Season 1- April to September and Season 2 October - March) and class of milk yield at 270 days. The age at first calving (AFC) was considered as a random effect. The mean observed for total milk yield was 1458.75Kg. Calving Season 2 encloses 65.6% of births. The means of cull age, in months, and the percentage of SA were, respectively: 10.69 e 69% (SA1), 19.30 e 63% (SA2), 26.4 e 54% (SA3), 33.15 e 42% (SA4), 38.53 e 36% (SA5) e 42.65 e 26% (SA6). It is verified that most of culls happens after the first lactation, among the sixth and eleventh month after first calving. It was observed that the factors: farm production, birth year and class of milk yield at 270 days affected significantly all SAs. Factors like calving season and the age at first calving (AFC) were only significant for SAL Being significant the factor AFC in level of 1% and factor time in 10%. For other SAs these factors were not statistically significant.

Radioprotection of beta-carotene evaluated on mouse somatic and germ cells

In the present paper, the protective effect of beta-carotene was evaluated after whole body exposure of mice to 2 Gy of X-rays. Splenocytes, reticulocytes, bone marrow cells and spermatids were evaluated for the frequency of micronuclei (MN) induced by X-rays. Mice were treated (gavage) with beta-carotene (10, 25 and 50 mg/kg b.w.) for 5 consecutive days and, 4 h after the last treatment, the animals were irradiated. The results obtained showed different frequencies of X-ray-induced-MN between different cell populations analysed and also different response of these cells to the beta-carotene treatment. The radioprotective effect of beta-carotene was observed in splenocytes, reticulocytes, and spermatids but not in bone marrow cells. No dose-response relationship for beta-carotene was detected. The time of sampling, the sensitivity of the cells as well as the antioxidant activity of beta-carotene are discussed as important factors for the radioprotective action of this provitamin.

Improvement of the corrosion resistance of polysiloxane hybrid coatings by cerium doping

Polysiloxane hybrid films were deposited on stainless steel by dip-coating using a sol prepared by hydrolytic co-polycondensation of tetraethoxysilane (TEOS) and 3-methacryloxy propyltrimethoxysilane (MPTS), followed by radical polymerization of methacrylic moieties. The TEOS/MPTS ratio was chosen equal to 2 and the Ce/Si ratio varied between 0.01 and 0.1. The effects of cerium concentration and valence (Ce(III) and Ce (IV)) on the structural features of polysiloxane films were studied by X-ray photoelectron spectroscopy (XPS) and (29)Si nuclear magnetic resonance (NMR). The corrosion protection of stainless steel by the hybrid coatings was investigated by XPS, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization curves, after immersion in saline and acid solutions. The NMR results have shown for Ce(IV) doped films a high degree of polycondensation of up to 89%. Electrochemical analysis has evidenced that hybrid films with the lowest Ce concentration act as an efficient diffusion barrier by increasing the corrosion resistance and reducing the current densities up to 3 orders of magnitude compared to bare stainless steel. The analysis of structural effects induced by Ce(III) and Ce(IV) species, performed by XPS, indicates that the improved corrosion protection of Ce(IV) doped films might be mainly related to the enhanced polymerization of siloxane groups. (C) 2010 Elsevier B.V. All rights reserved.