Análise espacial dos resultados eleitorais em Portugal – Aplicação do Geographically Weighted Regression

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação.

Projeto mecânico de equipamento para fabrico automatizado de vestuário

O fabrico de vestuário é uma atividade que se desenvolve em Portugal há várias décadas. Existem marcas de vestuário com reconhecimento a nível mundial que são de origem portuguesa. Para se conseguir qualidade é necessário inovar e automatizar determinados processos, de forma a aumentar produtividades e reduzir erros devido à mão de obra de tarefas intensivas. Na empresa Portuguesa Henrique Camões, com uma vasta experiência ligada a equipamentos de fabrico têxtil, nasceu a ideia de projetar um protótipo de um equipamento automatizado para o fabrico de colarinhos e punhos, com a finalidade de verificar a sua viabilidade a nível funcional. Este trabalho teve assim por base a necessidade de efetuar um projeto sobre um equipamento capaz de costurar e cortar colarinhos e punhos, a serem aplicados em peças de vestuário. Inicialmente foi efetuado um estudo prévio de levantamento de equipamentos já existentes para fins semelhantes. Foi então necessário idealizar um equipamento capaz de responder às expectativas e exigências por parte do cliente. Após os esboços iniciais, onde foram definidos os tipos de mecanismos e formas de funcionamento dos diferentes sistemas em função dos movimentos e ações pretendidas e a estrutura do equipamento, estes sistemas foram otimizados por forma a se obter como resultado final um equipamento funcional. Foi também projetado o esquema pneumático e Grafcet de funcionamento do equipamento. Como auxiliares do projeto, apresentam-se a lista de componentes e de processos de fabrico, bem como os desenhos de pormenor de todos os componentes integrantes da estrutura. O resultado final é um conjunto de ideias e soluções possíveis de aplicar num equipamento deste tipo. De facto, a solução proposta é uma possibilidade viável para um equipamento automatizado para costura e corte de colarinhos e punhos.

Ponseti Method: Does Age at the Beginning of Treatment Make a Difference?

The Ponseti method is reportedly effective for treating clubfoot in children up to 9 years of age. However, whether age at the beginning of treatment influences the rate of successful correction and the rate of relapse is unknown. We therefore retrospectively reviewed 68 consecutive children with 102 idiopathic clubfeet treated by the Ponseti technique in four Portuguese hospitals. We followed patients a minimum of 30 months (mean, 41.4 months; range, 30–61 months). The patients were divided into two groups according to their age at the beginning of treatment; Group I was younger than 6 months and Group II was older than 6 months. All feet(100%) were initially corrected and no feet required extensive surgery regardless of age at the beginning of treatment. There were no differences between Groups I and II in the number of casts, tenotomies, success in terms of rate of initial correction, rate of recurrence, and rate of tibialis anterior transference. The rate of the Ponseti method in avoiding extensive surgery was 100% in Groups I and II; relapses occurred in 8% of the feet in younger and older children. Level of Evidence: Level II, prognostic study. See the Guidelines for Authors for a complete description of levels of evidence.

The impacts of the Cape Verde self-employed social security scheme

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics

MAC regenerative analysis of wireless Ad-Hoc networks

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

The internationalization process of born global firms in high-tech and low-tech industries: Is there any difference?

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Stops and bonanzas in the EU: Does being part of the Euro Area make a difference?

In this paper, we investigate whether being part of the euro area influences the conditional probability of going through a sudden stop or a bonanza of capital flows. Our sample period is from 1995 until 2014. We identify these two phenomena and we evaluate which push and pull factors help predict the conditional probability of experiencing one of them. We find that most countries had significant capital inflows until 2008 and that there were more sudden stops during the recent financial crisis than in any other moment in our sample. The factors that better help forecast the conditional probability of a sudden stop are global uncertainty (represented by the push factor “Volatility Index”), and the domestic economic activity (pull factors “GDP growth” and “consumer confidence”). An indicator of country risk (pull factor “change in credit rating”) is the most significant one for predicting bonanzas. Ultimately, we find no evidence that being part of the euro area influences the conditional probability of going through a sudden stop or a bonanza.

Empirical evidence on the difference between the effective and the statutory tax rates for listed groups in Germany

The difference between the statutory and effective tax rate for listed groups is a complex variable influenced by a variety of factors. This paper aims to analyze whether this difference exists for listed groups in the German market and tests which factors have an impact on it. Thus the sample consists of 130 corporations listed in the three major German stock indices. The findings suggest that the companies that pay less than the statutory rate clearly outweigh the ones that pay more, and that the income earned from associated companies has a significant impact on this difference.

EFFECT – Efficient finite element code

The theme of this dissertation is the finite element method applied to mechanical structures. A new finite element program is developed that, besides executing different types of structural analysis, also allows the calculation of the derivatives of structural performances using the continuum method of design sensitivities analysis, with the purpose of allowing, in combination with the mathematical programming algorithms found in the commercial software MATLAB, to solve structural optimization problems. The program is called EFFECT – Efficient Finite Element Code. The object-oriented programming paradigm and specifically the C ++ programming language are used for program development. The main objective of this dissertation is to design EFFECT so that it can constitute, in this stage of development, the foundation for a program with analysis capacities similar to other open source finite element programs. In this first stage, 6 elements are implemented for linear analysis: 2-dimensional truss (Truss2D), 3-dimensional truss (Truss3D), 2-dimensional beam (Beam2D), 3-dimensional beam (Beam3D), triangular shell element (Shell3Node) and quadrilateral shell element (Shell4Node). The shell elements combine two distinct elements, one for simulating the membrane behavior and the other to simulate the plate bending behavior. The non-linear analysis capability is also developed, combining the corotational formulation with the Newton-Raphson iterative method, but at this stage is only avaiable to solve problems modeled with Beam2D elements subject to large displacements and rotations, called nonlinear geometric problems. The design sensitivity analysis capability is implemented in two elements, Truss2D and Beam2D, where are included the procedures and the analytic expressions for calculating derivatives of displacements, stress and volume performances with respect to 5 different design variables types. Finally, a set of test examples were created to validate the accuracy and consistency of the result obtained from EFFECT, by comparing them with results published in the literature or obtained with the ANSYS commercial finite element code.

Cryptococcosis in Atlántico, Colombia: an approximation of the prevalence of this mycosis and the distribution of the etiological agent in the environment

ABSTRACTINTRODUCTION:Cryptococcosis is an invasive disease acquired by inhalation of infectious propagules from the environment. Currently, compulsory notification of the spread of this disease is not required in Colombia. However, reporting of human immunodeficiency virus (HIV)/acquired immune deficiency syndrome cases to the National Surveillance System has suggested that there is a growing population at risk of contracting cryptococcosis. Few studies have described the occurrence of cryptococcosis in Colombia. Therefore, in this study, we examined the pathology of this disease in Atlántico, Colombia and determined the distributions of Cryptococcus neoformans and Cryptococcus gattii in the environment.METHODS:Clinical samples/isolates were gathered from cases of cryptococcosis previously diagnosed at health institutions in Atlántico, and surveys were completed by clinicians. The environmental study considered 32 sampling points and three tree species, i.e., Quickstick ( Gliricidia sepium ), Almond ( Terminalia catappa ), and Pink trumpet ( Tabebuia rosea ). Environmental and clinical samples/isolates were analyzed for phenotypic and genotypic confirmation.RESULTS:From 1997-2014, 41 cases of cryptococcosis were reported. The mean patient age was 40.5 years (range: 18-63 years); 76% were men, and 78% were HIV positive. Isolation was possible in 38 cases ( C. neoformans , molecular type VNI in 37 cases and C. gattii , molecular type VGI in one case). In 2012-2014, 2,068 environmental samples were analyzed with a positivity of 0.4% ( C. neoformans , molecular type VNI) in Almond and Pink trumpet trees.CONCLUSIONS:Cryptococcus neoformans , molecular type VNI had a higher prevalence than C. gattii and was associated with human exposure and the pathogenesis of cryptococcosis in this geographical region.

Geographic weighted regression: applicability to epidemiological studies of leprosy

Abstract: INTRODUCTION: Geographic information systems (GIS) enable public health data to be analyzed in terms of geographical variability and the relationship between risk factors and diseases. This study discusses the application of the geographic weighted regression (GWR) model to health data to improve the understanding of spatially varying social and clinical factors that potentially impact leprosy prevalence. METHODS: This ecological study used data from leprosy case records from 1998-2006, aggregated by neighborhood in the Duque de Caxias municipality in the State of Rio de Janeiro, Brazil. In the GWR model, the associations between the log of the leprosy detection rate and social and clinical factors were analyzed. RESULTS: Maps of the estimated coefficients by neighborhood confirmed the heterogeneous spatial relationships between the leprosy detection rates and the predictors. The proportion of households with piped water was associated with higher detection rates, mainly in the northeast of the municipality. Indeterminate forms were strongly associated with higher detections rates in the south, where access to health services was more established. CONCLUSIONS: GWR proved a useful tool for epidemiological analysis of leprosy in a local area, such as Duque de Caxias. Epidemiological analysis using the maps of the GWR model offered the advantage of visualizing the problem in sub-regions and identifying any spatial dependence in the local study area.

Breastfeeding: making the difference in the development, health and nutrition of term and preterm newborns

Breastfeeding is the natural and safe way of feeding small infants, providing nutritional, immunological, psychological and economic recognized and unquestionable advantages. These qualities are especially important in premature infants, because of their vulnerability. Despite highly desirable, there is, in general, little success in breastfeeding preterm infants, especially in special care neonatal units. There are evidences that a high supportive hospital environment, with an interdisciplinary team, makes possible to these infants to be breastfed. In this article, the authors present an up-to-date review about the components of human milk and its unique characteristics, as well as describes aspects that make the breast milk particularly suitable for feeding the premature newborn.

Damage propagation in composite Materials meso-mechanical models

Composite materials have a complex behavior, which is difficult to predict under different types of loads. In the course of this dissertation a methodology was developed to predict failure and damage propagation of composite material specimens. This methodology uses finite element numerical models created with Ansys and Matlab softwares. The methodology is able to perform an incremental-iterative analysis, which increases, gradually, the load applied to the specimen. Several structural failure phenomena are considered, such as fiber and/or matrix failure, delamination or shear plasticity. Failure criteria based on element stresses were implemented and a procedure to reduce the stiffness of the failed elements was prepared. The material used in this dissertation consist of a spread tow carbon fabric with a 0°/90° arrangement and the main numerical model analyzed is a 26-plies specimen under compression loads. Numerical results were compared with the results of specimens tested experimentally, whose mechanical properties are unknown, knowing only the geometry of the specimen. The material properties of the numerical model were adjusted in the course of this dissertation, in order to find the lowest difference between the numerical and experimental results with an error lower than 5% (it was performed the numerical model identification based on the experimental results).

Comparison of different numerical methods for the solution of the time-fractional reaction-diffusion equation with variable diffusion coefficient

In this work we perform a comparison of two different numerical schemes for the solution of the time-fractional diffusion equation with variable diffusion coefficient and a nonlinear source term. The two methods are the implicit numerical scheme presented in [M.L. Morgado, M. Rebelo, Numerical approximation of distributed order reaction- diffusion equations, Journal of Computational and Applied Mathematics 275 (2015) 216-227] that is adapted to our type of equation, and a colocation method where Chebyshev polynomials are used to reduce the fractional differential equation to a system of ordinary differential equations