Taxonomy, Bionomics and Biofouling of Bryozoans from the Coasts of India and the Antarctic Waters

The study of bryozoans, an important group of coelomates in the marine environment is an integral part of faunistic investigations. Bryozones are an ancient, aberrant phylum of microscopic but fascinating and often beautiful animals that build intricate colonies sometimes resembling minicolonies. In this study taxonomy, bionomics and biofouling of bryozoans from the coasts of India and the Antarctic waters. The marine biofouling is found to be hazardous. Bryozoans are microscopic , sessile,colonical coelomates that are permanently fastened in exoskeletal cases or gelatinous material of their own secretion.It is hoped that this work would help the future researchers to devote attention on microbenthos of the continental shelf of India when samples are made available through collections conducted by any ocean going vessel. In the present work an extensive study on the bryozoan foulers that occur at five selected sites of the cochin estury had to be examined and since the hydrographic parameters such as salinity, temperature, pH and dissolved oxygen in the estury,vary greatly from that in the open ocean, a frequent monitoring of these parameters was essential.

Development of Best Practices for Ship Recycling Processes

Ship recycling has been considered as the best means to dispose off an obsolete ship. The current state of art of technology combined with the demands of sustainable developments from the global maritime industrial sector has modified the status of erstwhile ‘ship breaking’ involving ship scrap business to a modern industry undertaking dismantling of ships and recycling/reusing the dismantled products in a supply chain of pre owned product market by following the principles of recycling. Industries will have to formulate a set of best practices and blend them with the engineering activities for producing better quality products, improving the productivity and for achieving improved performances related to sustainable development. Improved performance by industries in a sustainable development perspective is accomplished only by implementing the 4E principles, ie.,. ecofriendliness, engineering efficiency, energy conservation and ergonomics in their core operations. The present study has done a comprehensive investigation into various ship recycling operations for formulating a set of best practices.Being the ultimate life cycle stage of a ship, ship recycling activities incorporate certain commercial procedures well in advance to facilitate the objectives of dismantling and recycling/reusing of various parts of the vessel. Thorough knowledge regarding these background procedures in ship recycling is essential for examining and understanding the industrial business operations associated with it. As a first step, the practices followed in merchant shipping operations regarding the decision on decommissioning have been and made available in the thesis. Brief description about the positioning methods and important preparations for the most feasible ship recycling method ie.,. beach method have been provided as a part of the outline of the background information. Available sources of guidelines, codes and rules & regulations for ship recycling have been compiled and included in the discussion.Very brief summary of practices in major ship recycling destinations has been prepared and listed for providing an overview of the global ship recycling activities. The present status of ship recycling by treating it as a full fledged engineering industry has been brought out to establish the need for looking into the development of the best practices. Major engineering attributes of ship as a unique engineering product and the significant influencing factors on her life cycle stage operations have been studied and added to the information base on ship recycling. Role of ship recycling industry as an important player in global sustainable development efforts has been reviewed by analysing the benefits of ship recycling. A brief synopsis on the state of art of ship recycling in major international ship recycling centres has also been incorporated in the backdrop knowledgebase generation on ship recycling processes.Publications available in this field have been reviewed and classified into five subject categories viz., Infrastructure for recycling yards and methods of dismantling, Rules regarding ship recycling activities, Environmental and safety aspects of ship recycling, Role of naval architects and ship classification societies, Application of information technology and Demand forecasting. The inference from the literature survey have been summarised and recorded. Noticeable observations in the inference include need of creation of a comprehensive knowledgebase on ship recycling and its effective implementation in the industry and the insignificant involvement of naval architects and shipbuilding engineers in ship recycling industry. These two important inferences and the message conveyed by them have been addressed with due importance in the subsequent part of the present study.As a part of the study the importance of demand forecasting in ship recycling has been introduced and presented. A sample input for ship recycling data for implementation of computer based methods of demand forecasting has been presented in this section of the thesis.The interdisciplinary nature of engineering processes involved in ship recycling has been identified as one of the important features of this industry. The present study has identified more than a dozen major stake holders in ship recycling having their own interests and roles. It has also been observed that most of the ship recycling activities is carried out in South East Asian countries where the beach based ship recycling is done in yards without proper infrastructure support. A model of beach based ship recycling has been developed and the roles, responsibilities and the mutual interactions of the elements of the system have been documented as a part of the study Subsequently the need of a generation of a wide knowledgebase on ship recycling activities as pointed out by the literature survey has been addressed. The information base and source of expertise required to build a broad knowledgebase on ship recycling operations have been identified and tabulated. Eleven important ship recycling processes have been identified and a brief sketch of steps involved in these processes have been examined and addressed in detail. Based on these findings, a detailed sequential disassembly process plan of ship recycling has been prepared and charted. After having established the need of best practices in ship recycling initially, the present study here identifies development of a user friendly expert system for ship recycling process as one of the constituents of the proposed best practises. A user friendly expert system has been developed for beach based ship recycling processes and is named as Ship Recycling Recommender (SRR). Two important functions of SRR, first one for the ‘Administrators’, the stake holders at the helm of the ship recycling affairs and second one for the ‘Users’, the stake holders who execute the actual dismantling have been presented by highlighting the steps involved in the execution of the software. The important output generated, ie.,. recommended practices for ship dismantling processes and safe handling information on materials present onboard have been presented with the help of ship recycling reports generated by the expert system. A brief account of necessity of having a ship recycling work content estimation as part of the best practices has been presented in the study. This is supported by a detailed work estimation schedule for the same as one of the appendices.As mentioned earlier, a definite lack of involvement of naval architect has been observed in development of methodologies for improving the status of ship recycling industry. Present study has put forward a holistic approach to review the status of ship recycling not simply as end of life activity of all ‘time expired’ vessels, but as a focal point of integrating all life cycle activities. A new engineering design philosophy targeting sustainable development of marine industrial domain, named design for ship recycling has been identified, formulated and presented. A new model of ship life cycle has been proposed by adding few stages to the traditional life cycle after analysing their critical role in accomplishing clean and safe end of life and partial dismantling of ships. Two applications of design for ship recycling viz, recyclability of ships and her products and allotment of Green Safety Index for ships have been presented as a part of implementation of the philosophy in actual practice.

Biochemical effects of ethanol on oreochromis mossambicus (Peters)

The present study dealt with the haematological, biochemical and istopathological impacts of different sub lethal concentrations of ethanol on a euryhaline teleost Oreochromis In05.s‘ambicu.5' (Peters).Studies carried out using GC indicated an increase in blood ethanol oncentration of the fish which mainly arose due to fishes entering into a state of hypoxia which explains ethanol production as an ubiquitous “anaerobic” end product, which gets accumulated whenever metabolic demand exceeds the mitochondrial oxidative potential. The very low amount of ethanol detected in the control group ofO mossambicns was mainly due to the activity of microorganisms in the gut ofO. Nzossambicus.Oedcma observed in the present study, is a defense mechanism that reduces the branchial superficial area of the fish which comes in contact with the external milieu. These mechanisms also increase the diffusion barrier to the pollutant. Dilation of the blood vessels is due to increased permeability helping in the free passage of ethanol into the blood stream. Telangiectasis observed explains the state of asphyxia of the fish when subjected to ethanol toxicity indicating acute respiratory distress. Gill aneurysm observed indicates impaired respiratory function. This is related to the rupture of the pillar cells which results in an increased blood flow inside the lamellae, causing dilation of the blood vessel or even aneurysm of gill.The present findings warrant future studies to explore A'T'Pases as possible biomarkers of pollutant exposure in ecotoxicology. This study indicated that O. mossambicus when exposed for 7 and 21 days to ethanol was under tremendous stress and parameters employed in this study can be adapted for future investigations as biomarkers of damage caused by ethanol to aquatic organisms. The present study revealed that O. mossambicus is sensitive to sub lethal concentrations of ethanol.

Studies on the benthose of the mud bank regions of the Kerala coast

There is very little information on the subtidal bottom fauna of the shelf regions in the seas around India. What little is known is restricted to macro benthos. The paucity of the work on bottom fauna and the importance of mud banks in the fishery of the South West Coast of India has initiated the present study. Attempts have been made to obtain a picture of the bottom fauna of a mud bank region of the Kerala Coast. The difficulties involved in the sampling and analysis, especially the availability of a suitable vessel during the S.W. Monsoon, resulted in the work being restricted mainly to the Narakal mud bank region 6 Km. north of Cochin Detailed sampling is conducted using grab, dredge and to a small extent beam trawl, to assess the qualitative and quantitative nature of the macro benthos. Important species contributing to the fauna are identified and the standing crop estimated for different seasons. The meiobenthos was studied using core samples taken from the grab. Animals were identified to the major taxa. Standing crop of meiobenthos and the quantitative importance of different groups were also studied. The data collected have been interpreted and discussed. As an understanding of the physico-chemical aspects of the environment is essential in order to obtain a true picture of the benthos, attempts were made in this direction. Environmental parameters such as temperature of the sediment, salinity, temperature, and dissolved oxygen in the overlying water were studied .during the period of benthos investigation. Monthly observations on the dissolved inorganic and organic phosphorus in the area of investigation have been made. The physico-chemical nature of the sediment was also studied. Influence of these ecological variables on the bottom fauna is discussed.

Marine Microalgae in the EEZ of India

As the title of the thesis indicates, a detailed analysis of microalgae, the major primary producers and the first link in aquatic food chains, was carried out during this study. Microalgae are either planktonic or benthic. The studies on these microscopic autotrophs are having an upsurge of interest recently due to their variations, adaptations, short generation time and various utilitarian aspects, including food, fodder and fuel. The surface water samples collected during the cruises (cruise nos. 189, 193, 195, 196, 203, 204, 205, 207 and 209) of Fisheries and Oceanographic Research Vessel (FORV) Sagar Sampada (Fig.2.2), conducted during the period from November 2000 to November 2002, are used as samples for microalgal estimation in the EEZ of India. The present research work includes the identification and distributional pattern of planktonic microalgae in the EEZ of India. The blooms encountered during the above mentioned cruises of FORV Sagar Sampada and the blooms of Kerala coast during the period from 2001-2005 are also studied

Echno economic studies on industrial fishing in the upper east coast of India

The present scenario of industrial fishing in India is that most of large trawlers are based at Visakhapatnam and congregate in the potential shrimp ground in the upper East coast of India commonly known as the Sandheads. These are outriggcr vessels operating two or four trawl nets along with a testing trawl called try net. In the early Seventies these vessels were operating on a very high economic return which was evident from the steady increase in number of outriggers over a period of twenty years. Since the total allowable catch has to be shared by all vessels including the increasing fleet, reduction per vessel output is bound to happen. Therefore some of them could not survive the competition and withdrew from the scene. The number of outriggers did not increase subsequently. However, there arose a doubt whether the existing fleet of about 180 vessels are fishing economically or whether there is any scope for further introduction of industrial vessels in the region. This study is focussing to the techno economic aspects of industrial fishing in the upper East coast of India

Pathological changes in Fenneropenaeus indicus experimentally infected with white spot virus and virus morphogenesis

To demonstrate pathological changes due to white spot virus infection in Fenneropenaeus indicus, a batch of hatchery bred quarantined animals was experimentally infected with the virus. Organs such as gills, foregut, mid-gut, hindgut, nerve, eye, heart, ovary and integument were examined by light and electron microscopy. Histopathological analyses revealed changes hitherto not reported in F. indicus such as lesions to the internal folding of gut resulted in syncytial mass sloughed off into lumen, thickening of hepatopancreatic connective tissue with vacuolization of tubules and necrosis of rectal pads in hindgut. Virus replication was seen in the crystalline tract region of the compound eye and eosinophilic granules infiltrated from its base. In the gill arch, dilation and disintegration of median blood vessel was observed. In the nervous tissues, encapsulation and subsequent atrophy of hypertrophied nuclei of the neurosecretory cells were found. Transmission electron microscopy showed viral replication and morphogenesis in cells of infected tissue. De novo formed vesicles covered the capsid forming a bilayered envelop opened at one end inside the virogenic stroma. Circular vesicles containing nuclear material was found fused with the envelop. Subsequent thickening of the envelop resulted in the fully formed virus. In this study, a correlation was observed between the stages of viral multiplication and the corresponding pathological changes in the cells during the WSV infection. Accordingly, gill and foregut tissues were found highly infected during the onset of clinical signs itself, and are proposed to be used as the tissues for routine disease diagnosis.

Biogeochemical quality assessment of the sediments in Kerala coast

Sediments are the reserve of environmental variation and analysis gives the diverse nature of the environmental chemical pattern. Present attempt provides an insight on the biogeochemistry (BGC) of sediment in selected stations of Kerala coast, India. Sampling along the Kerala coast was done during May – June 2009 in cruise no: 267 of Fishery and Oceanographic Research Vessel, Sagar Sampada. Eleven samples were collected from four stations - Cape, Trivandrum, Kollam and Cochin. Study of organic matter (OM) is significant as it exerts a strong control on the diagenic alterations in the sediment. Samples were analyzed for their Texture; OM- Protein, Carbohydrate, Tannin and lignin, Lipid; Trace metal; Total phosphorus and CHN. Among the eleven analyzed sediment, sample from Cochin station has high clay (>30%) and silt (>40%) content. The rest of the stations showed elevated amount of sand content. Generally the investigation reveals an inverse relation between lipid with other OM- Protein, Carbohydrate, Tannin and lignin. The order of relative distribution of OM were Protein > Carbohydrate > Tannin and Lignin > Lipid. High concentration of trace metal, Fe was found at Kollam and Cochin. Trace metal concentration was directly related to OM distribution. But C/N and Fe/P ratios were inversely related to OM and trace metal.

Investigations on the structural and operational changes of Ring Seine Fishing Systems of Kerala and its Life Cycle Assessment (lCA)

The study covers theFishing capture technology innovation includes the catching of aquatic animal, using any kind of gear techniques, operated from a vessel. Utilization of fishing techniques varies, depending upon the type of fisheries, and can go from a basic and little hook connected to a line to huge and complex mid water trawls or seines operated by large fishing vessels.The size and autonomy of a fishing vessel is largely determined by its ability to handle, process and store fish in good condition on board, and thus these two characteristics have been greatly influenced by the introduction and utilization of ice and refrigeration machinery. Other technological developments especially hydraulic hauling machinery, fish finding electronics and synthetic twines have also had a major impact on the efficiency and profitability of fishing vessels.A wide variety of fishing gears and practices ranging from small-scale artisanal to advanced mechanised systems are used for fish capture in Kerala. Most important among these fishing gears are trawls, seines, lines, gillnets and entangling nets and traps The modern sector was introduced in 1953 at Neendakara, Shakthikulangara region under the initiative of Indo-Norwegian project (INP). The novel facilities introduced in fishing industry by Indo- Norwegian project accordingly are mechanically operated new boats with new fishing nets. Soon after mechanization, motorization programme gained momentum in Kerala especially in Alleppey, Ernakulam and Kollam districts.

Organische Mikro- und Nanodrähte auf Basis von Perylendiimiden

Diese Arbeit thematisiert die optimierte Darstellung von organischen Mikro- und Nanodrähten, Untersuchungen bezüglich deren molekularen Aufbaus und die anwendungsorientierte Charakterisierung der Eigenschaften. Mikro- und Nanodrähte haben in den letzten Jahren im Zuge der Miniaturisierung von Technologien an weitreichendem Interesse gewonnen. Solche eindimensionalen Strukturen, deren Durchmesser im Bereich weniger zehn Nanometer bis zu einigen wenigen Mikrometern liegt, sind Gegenstand intensiver Forschung. Neben anorganischen Ausgangssubstanzen zur Erzeugung von Mikro- und Nanodrähten haben organische Funktionsmaterialien aufgrund ihrer einfachen und kostengünstigen Verarbeitbarkeit sowie ihrer interessanten elektrischen und optischen Eigenschaften an Bedeutung gewonnen. Eine wichtige Materialklasse ist in diesem Zusammenhang die Verbindungsklasse der n-halbleitenden Perylentetracarbonsäurediimide (kurz Perylendiimide). Dem erfolgreichen Einsatz von eindimensionalen Strukturen als miniaturisierte Bausteine geht die optimierte und kontrollierte Herstellung voraus. Im Rahmen der Doktorarbeit wurde die neue Methode der Drahterzeugung „Trocknen unter Lösungsmittelatmosphäre“ entwickelt, welche auf Selbstassemblierung der Substanzmoleküle aus Lösung basiert und unter dem Einfluss von Lösungsmitteldampf direkt auf einem vorgegebenen Substrat stattfindet. Im Gegensatz zu literaturbekannten Methoden ist kein Transfer der Drähte aus einem Reaktionsgefäß nötig und damit verbundene Beschädigungen der Strukturen werden vermieden. Während herkömmliche Methoden in einer unkontrolliert großen Menge von ineinander verwundenen Drähten resultieren, erlaubt die substratbasierte Technik die Bildung voneinander separierter Einzelfasern und somit beispielsweise den Einsatz in Einzelstrukturbauteilen. Die erhaltenen Fasern sind morphologisch sehr gleichmäßig und weisen bei Längen von bis zu 5 mm bemerkenswert hohe Aspektverhältnisse von über 10000 auf. Darüber hinaus kann durch das direkte Drahtwachstum auf dem Substrat über den Einsatz von vorstrukturierten Oberflächen und Wachstumsmasken gerichtetes, lokal beschränktes Drahtwachstum erzielt werden und damit aktive Kontrolle auf Richtung und Wachstumsbereich der makroskopisch nicht handhabbaren Objekte ausgeübt werden. Um das Drahtwachstum auch hinsichtlich der Materialauswahl, d. h. der eingesetzten Ausgangsmaterialien zur Drahterzeugung und somit der resultierenden Eigenschaften der gebildeten Strukturen aktiv kontrollieren zu können, wird der Einfluss unterschiedlicher Parameter auf die Morphologie der Selbstassemblierungsprodukte am Beispiel unterschiedlicher Derivate betrachtet. So stellt sich zum einen die Art der eingesetzten Lösungsmittel in flüssiger und gasförmiger Phase beim Trocknen unter Lösungsmittelatmosphäre als wichtiger Faktor heraus. Beide Lösungsmittel dienen als Interaktionspartner für die Moleküle des funktionellen Drahtmaterials im Selbstassemblierungsprozess. Spezifische Wechselwirkungen zwischen Perylendiimid-Molekülen untereinander und mit Lösungsmittel-Molekülen bestimmen dabei die äußere Form der erhaltenen Strukturen. Ein weiterer wichtiger Faktor ist die Molekülstruktur des verwendeten funktionellen Perylendiimids. Es wird der Einfluss einer Bay-Substitution bzw. einer unsymmetrischen Imid-Substitution auf die Morphologie der erhaltenen Strukturen herausgestellt. Für das detaillierte Verständnis des Zusammenhanges zwischen Molekülstruktur und nötigen Wachstumsbedingungen für die Bildung von eindimensionalen Strukturen zum einen, aber auch die resultierenden Eigenschaften der erhaltenen Aggregationsprodukte zum anderen, sind Informationen über den molekularen Aufbau von großer Bedeutung. Im Rahmen der Doktorarbeit konnte ein molekular hoch geordneter, kristalliner Aufbau der Drähte nachgewiesen werden. Durch Kombination unterschiedlicher Messmethoden ist es gelungen, die molekulare Anordnung in Strukturen aus einem Spirobifluoren-substituierten Derivat in Form einer verkippten Molekülstapelung entlang der Drahtlängsrichtung zu bestimmen. Um mögliche Anwendungsbereiche der erzeugten Drähte aufzuzeigen, wurden diese hinsichtlich ihrer elektrischen und optischen Eigenschaften analysiert. Neben dem potentiellen Einsatz im Bereich von Filteranwendungen und Sensoren, sind vor allem die halbleitenden und optisch wellenleitenden Eigenschaften hervorzuheben. Es konnten organische Transistoren auf der Basis von Einzeldrähten mit im Vergleich zu Dünnschichtbauteilen erhöhten Ladungsträgerbeweglichkeiten präpariert werden. Darüber hinaus wurden die erzeugten eindimensionalen Strukturen als aktive optische Wellenleiter charakterisiert. Die im Rahmen der Dissertation erarbeiteten Kenntnisse bezüglich der Bildung von eindimensionalen Strukturen durch Selbstassemblierung, des Drahtaufbaus und erster anwendungsorientierter Charakterisierung stellen eine Basis zur Weiterentwicklung solcher miniaturisierter Bausteine für unterschiedlichste Anwendungen dar. Die neu entwickelte Methode des Trocknens unter Lösungsmittelatmosphäre ist nicht auf den Einsatz von Perylendiimiden beschränkt, sondern kann auf andere Substanzklassen ausgeweitet werden. Dies eröffnet breite Möglichkeiten der Materialauswahl und somit der Einsatzmöglichkeiten der erhaltenen Strukturen.

Fabrication of Controlled Release Devices Using Supercritical Antisolvent Method

In this study, the supercritical antisolvent with enhanced mass transfer method (SASEM) is used to fabricate micro and nanoparticles of biocompatible and biodegradable polymer PLGA (poly DL lactide co glycolic acid). This process may be extended to the encapsulation of drugs in these micro and nanoparticles for controlled release purposes. Conventional supercritical antisolvent (SAS) process involves spraying a solution (organic solvent + dissolved polymer) into supercritical fluid (CO[subscript 2]), which acts as an antisolvent. The high rate of mass transfer between organic solvent and supercritical CO[subscript 2] results in supersaturation of the polymer in the spray droplet and precipitation of the polymer as micro or nanoparticles occurs. In the SASEM method, ultrasonic vibration is used to atomize the solution entering the high pressure with supercritical CO[subscript 2]. At the same time, the ultrasonic vibration generated turbulence in the high pressure vessel, leading to better mass transfer between the organic solvent and the supercritical CO₂. In this study, two organic solvents, acetone and dichloromethane (DCM) were used in the SASEM process. Phase Doppler Particle Analyzer (PDPA) was used to study the ultrasonic atomization of liquid using the ultrasonic probe for the SASEM process. Scanning Electron Microscopy (SEM) was used to study the size and morphology of the polymer particles collected at the end of the process.

Adherencia a criterios de pertinencia de revascularización coronaria del colegio americano de cardiología, servicio de hemodinamia Fundación Cardioinfantil- Bogotá 2011

Titulo: Adherencia a criterios de pertinencia de revascularización coronaria del colegio americano de cardiología 2009, en el servicio de hemodinámica de la fundación cardioinfantil Bogotá 2011. Introducción: La enfermedad cardiovascular es la principal causa de morbimortalidad a nivel mundial, teniendo mayor prevalencia enfermedad coronaria. Existen guías especificas para el manejo de esta enfermedad sin embargo su aplicación se entorpece por factores diversos. Este estudio quiere evaluar la adherencia, en el laboratorio de hemodinamia de la Fundación Cardioinfantil, a las guías de pertinencia de intervencionismo coronario de la ACCF (American college of cardiology foundation). Objetivo General: Evaluar el nivel de adherencia a criterios de pertinencia de revascularización coronaria del colegio americano de cardiología 2009, en el servicio de hemodinámia de la fundación cardioinfantil Bogotá 2011. Métodos: Se revisaron 200 historias clínicas pacientes con diagnóstico de síndrome coronario agudo, llevados a intervención coronaria, según características de pacientes , intervención, y nivel de adherencia se clasifico la intervención como apropiada, incierta e inadecuada . Resultados: De la población analizada, el 71% (n=142) de las intervenciones fueron clasificados como apropiadas, 20% (N=40) como inapropiadas y 8,5% (n=17) como inciertas. Los desenlaces y complicaciones no tuvieron asociación estadísticamente significativa (p> 0,005) con la adherencia a los criterios de pertinencia. Conclusiones: Respecto a la literatura existente el número de intervenciones inapropiadas es mayor en la FCI, comparado con estudios practicados en América Latina y Norte América, sin embargo una adherencia del 80 %, ubica a esta institución en un adecuado nivel de adherencia.

Implementation of global make to inventory strategy at BASF SE

La optimización y armonización son factores clave para tener un buen desempeño en la industria química. BASF ha desarrollado un proyecto llamada acelerador. El objetivo de este proyecto ha sido la armonización y la integración de los procesos de la cadena de suministro a nivel mundial. El proceso básico de manejo de inventarios se quedó fuera del proyecto y debía ser analizado. El departamento de manejo de inventarios en BASF SE ha estado desarrollando su propia estrategia para la definición de procesos globales de manufactura. En este trabajo se presentará un informe de las fases de la formulación de la estrategia y establecer algunas pautas para la fase de implementación que está teniendo lugar en 2012 y 2013.

The Digital Dream Team - Digital Divide (Group 4)

This vessel contains the poster and artefact link for The Digital Dream Teams' project

Sensibilidad y especificidad del ecocardiograma transtorácico para el diagnóstico de enfermedad coronaria

Introducción: La enfermedad coronaria es la principal causa de muerte en Colombia y el mundo en personas mayores de 45 años (1, 2). Con la variación en los perfiles epidemiológicos se espera que aumente su prevalencia y costo, disminuyendo la mortalidad. En el estudio diagnóstico de enfermedad coronaria, se realizan múltiples pruebas paraclínicas, dentro de estas, el ecocardiograma es muy utilizado y sus recomendaciones de uso se basan en estudios de hace más de 10 años (3). Metodología: Se realizó un estudio de prueba diagnóstica para determinar las características operativas del ecocardiograma transtorácico para el diagnóstico de enfermedad coronaria frente al cateterismo cardiaco en pacientes con dolor torácico. Resultados: Se analizaron 290 pacientes con una edad promedio de 67 años y 68% hombres; el 74.1% tenía hipertensión arterial y el 24.5% de diabetes mellitus. En el 61% de los pacientes se evidenció enfermedad coronaria por angiografía. La sensibilidad del ecocardiograma transtorácico para enfermedad coronaria fue del 70%, especificidad del 55%, valor predictivo negativo del 54% y valor predictivo positivo del 71%; con una efectividad del 65% y una capacidad predictora del 60.6% (p=0.02). Discusión: La anatomía coronaria fue similar a la descrita previamente, siendo las lesiones multivaso presente en un 41% y la lesión de un vaso fue del 22% (4, 5). Teniendo en cuenta la sensibilidad del 70% y especificidad del 55%, la facilidad de acceso, características no invasivas y el bajo costo; nos permiten recomendar utilizarlo como guía diagnóstica en el contexto del dolor torácico en el servicio de urgencias.