The electron-furfural scattering dynamics for 63 energetically open electronic states

We report on integral-, momentum transfer-and differential cross sections for elastic and electronically inelastic electron collisions with furfural (C5H4O2). The calculations were performed with two different theoretical methodologies, the Schwinger multichannel method with pseudopotentials (SMCPP) and the independent atom method with screening corrected additivity rule (IAM-SCAR) that now incorporates a further interference (I) term. The SMCPP with N energetically open electronic states (N-open) at either the static-exchange (N-open ch-SE) or the static-exchange-plus-polarisation (N-open ch-SEP) approximation was employed to calculate the scattering amplitudes at impact energies lying between 5 eV and 50 eV, using a channel coupling scheme that ranges from the 1ch-SEP up to the 63ch-SE level of approximation depending on the energy considered. For elastic scattering, we found very good overall agreement at higher energies among our SMCPP cross sections, our IAM-SCAR+I cross sections and the experimental data for furan (a molecule that differs from furfural only by the substitution of a hydrogen atom in furan with an aldehyde functional group). This is a good indication that our elastic cross sections are converged with respect to the multichannel coupling effect for most of the investigated intermediate energies. However, although the present application represents the most sophisticated calculation performed with the SMCPP method thus far, the inelastic cross sections, even for the low lying energy states, are still not completely converged for intermediate and higher energies. We discuss possible reasons leading to this discrepancy and point out what further steps need to be undertaken in order to improve the agreement between the calculated and measured cross sections. (C) 2016 AIP Publishing LLC.

Avaliação de impacto do Proagro Mais: um estudo de caso

Esta pesquisa avalia o impacto do \"Programa de Garantia da Atividade Agropecuária\" para agricultores familiares, conhecido como Proagro Mais. A relevância do trabalho fundamenta-se no considerável tamanho do Programa dentro do contexto das políticas de gestão de risco agrícola no Brasil. Além disso, é a primeira pesquisa desse tipo na literatura científica do país. A amostra é formada por produtores de milho do Estado do Paraná, tendo como linha base o ano de 2003, uma vez que é o ano anterior ao lançamento do Proagro Mais, e o ano de 2005 como ano de impacto. A base de dados utilizada neste estudo foi fornecida pelo Tribunal de Contas da União (TCU), cujas variáveis relevantes incluem características da cultura e dos agricultores familiares, como área financiada, atividades agrícolas complementares, educação e rendimento esperado. Adicionalmente, a partir de outras fontes públicas, foram adicionadas variáveis meteorológicas e regionais para controlar a localização da fazenda. O objetivo da pesquisa é avaliar o impacto do Proagro Mais sobre o montante de crédito por hectare concedido aos beneficiários do Programa. As metodologias usadas incluem o Propensity Score Matching (PSM), a Diferença das Diferenças (DID) e dois estimadores condicionais do DID com PSM usando dados em painel e repeated cross-section. As estimativas econométricas mostram que o Efeito Médio do Tratamento nos Tratados (EMTT) teve sinal negativo na maioria dos modelos revelando que, após o período de perda de rendimento, o grupo de controle teve um valor médio mais elevado de crédito por hectare do que os beneficiários do Proagro Mais. Os resultados sugerem a existência de mecanismos que poderiam complementar ou substituir o Proagro Mais como instrumento de gestão de risco agrícola, mas também podem sugerir que o Programa avaliado não cubra todos os riscos do setor.

Systematic investigation of projectile fragmentation using beams of unstable B and C isotopes

Background: Models describing nuclear fragmentation and fragmentation fission deliver important input for planning nuclear physics experiments and future radioactive ion beam facilities. These models are usually benchmarked against data from stable beam experiments. In the future, two-step fragmentation reactions with exotic nuclei as stepping stones are a promising tool for reaching the most neutron-rich nuclei, creating a need for models to describe also these reactions. Purpose: We want to extend the presently available data on fragmentation reactions towards the light exotic region on the nuclear chart. Furthermore, we want to improve the understanding of projectile fragmentation especially for unstable isotopes. Method: We have measured projectile fragments from (10,12-18C) and B10-15 isotopes colliding with a carbon target. These measurements were all performed within one experiment, which gives rise to a very consistent data set. We compare our data to model calculations. Results: One-proton removal cross sections with different final neutron numbers (1 pxn) for relativistic C-10,C-12-18 and B10-15 isotopes impinging on a carbon target. Comparing model calculations to the data, we find that the EPAX code is not able to describe the data satisfactorily. Using ABRABLA07 on the other hand, we find that the average excitation energy per abraded nucleon needs to be decreased from 27 MeV to 8.1 MeV. With that decrease ABRABLA07 describes the data surprisingly well. Conclusions: Extending the available data towards light unstable nuclei with a consistent set of new data has allowed a systematic investigation of the role of the excitation energy induced in projectile fragmentation. Most striking is the apparent mass dependence of the average excitation energy per abraded nucleon. Nevertheless, this parameter, which has been related to final-state interactions, requires further study.

Recolonization of mortars by endolithic organisms on the walls of San Roque church in Campeche (Mexico): A case of tertiary bioreceptivity

San Roque church (Campeche, Mexico) was built at the end of the 17th century with a micritic limestone and lime mortar in baroque style. In 2005 the church exhibited heavy biodeterioration associated with the development of extensive dark green phototrophic-based biofilms. Several cyanobacteria belonging to the order Chroococcales and lichenized fungi (Toninia nordlandica, Lobaria quercizans, Lecanora subcarnea, Cystocoleus ebeneus) were predominant in the dark biofilm samples, as revealed by DNA-based molecular techniques. In 2009, a cleaning and restoration intervention was adopted; however, after few months, microbial recolonization started to be noticeable on the painted church walls, representing an early phototrophic-based recolonization. According to molecular analysis, scanning electron microscopy observations and digital image analysis of cross sections, new phototrophic-based colonization, composed of cyanobacteria and bryophytes, developed mainly beneath the restored mortars. The intrinsic properties of the mortars, the tropical climate of Campeche and the absence of a biocide treatment in the restoration protocol influenced the recolonization of the church façades and enhanced the overall rate of deterioration in a short-term period.

Health inequality between immigrants and natives in Spain: the loss of the healthy immigrant effect in times of economic crisis

Background: The immigrant population living in Spain grew exponentially in the early 2000s but has been particularly affected by the economic crisis. This study aims to analyse health inequalities between immigrants born in middle- or low-income countries and natives in Spain, in 2006 and 2012, taking into account gender, year of arrival and socioeconomic exposures. Methods: Study of trends using two cross-sections, the 2006 and 2012 editions of the Spanish National Health Survey, including residents in Spain aged 15–64 years (20 810 natives and 2950 immigrants in 2006, 14 291 natives and 2448 immigrants in 2012). Fair/poor self-rated health, poor mental health (GHQ-12 > 2), chronic activity limitation and use of psychotropic drugs were compared between natives and immigrants who arrived in Spain before 2006, adjusting robust Poisson regression models for age and socioeconomic variables to obtain prevalence ratios (PR) and 95% confidence interval (CI). Results: Inequalities in poor self-rated health between immigrants and natives tend to increase among women (age-adjusted PR2006 = 1.39; 95% CI: 1.24–1.56, PR2012 = 1.56; 95% CI: 1.33–1.82). Among men, there is a new onset of inequalities in poor mental health (PR2006 = 1.10; 95% CI: 0.86–1.40, PR2012 = 1.34; 95% CI: 1.06–1.69) and an equalization of the previously lower use of psychotropic drugs (PR2006 = 0.22; 95% CI: 0.11–0.43, PR2012 = 1.20; 95% CI: 0.73–2.01). Conclusions: Between 2006 and 2012, immigrants who arrived in Spain before 2006 appeared to worsen their health status when compared with natives. The loss of the healthy immigrant effect in the context of a worse impact of the economic crisis on immigrants appears as potential explanation. Employment, social protection and re-universalization of healthcare would prevent further deterioration of immigrants’ health status.

Measurements of π±, K±, K0s, Λ and proton production in proton–carbon interactions at 31 GeV/c with the NA61/SHINE spectrometer at the CERN SPS

Measurements of hadron production in p+C interactions at 31 GeV/c are performed using the NA61/SHINE spectrometer at the CERN SPS. The analysis is based on the full set of data collected in 2009 using a graphite target with a thickness of 4% of a nuclear interaction length. Inelastic and production cross sections as well as spectra of π±, K±, p, K0s and Λ are measured with high precision. These measurements are essential for improved calculations of the initial neutrino fluxes in the T2K long-baseline neutrino oscillation experiment in Japan. A comparison of the NA61/SHINE measurements with predictions of several hadroproduction models is presented.

Fault development and interaction in distributed strike-slip shear zones: an experimental approach

Analogue model experiments using both brittle and viscous materials were performed to investigate the development and interaction of strike-slip faults in zones of distributed shear deformation. At low strain, bulk dextral shear deformation of an initial rectangular model is dominantly accommodated by left-stepping, en echelon strike-slip faults (Riedel shears, R) that form in response to the regional (bulk) stress field. Push-up zones form in the area of interaction between adjacent left-stepping Riedel shears. In cross sections, faults bounding push-up zones have an arcuate shape or merge at depth. Adjacent left-stepping R shears merge by sideways propagation or link by short synthetic shears that strike subparallel to the bulk shear direction. Coalescence of en echelon R shears results in major, through-going faults zones (master faults). Several parallel master faults develop due to the distributed nature of deformation. Spacing between master faults is related to the thickness of the brittle layers overlying the basal viscous layer. Master faults control to a large extent the subsequent fault pattern. With increasing strain, relatively short antithetic and synthetic faults develop mostly between old, but still active master faults. The orientation and evolution of the new faults indicate local modifications of the stress field. In experiments lacking lateral borders, closely spaced parallel antithetic faults (cross faults) define blocks that undergo clockwise rotation about a vertical axis with continuing deformation. Fault development and fault interaction at different stages of shear strain in our models show similarities with natural examples that have undergone distributed shear.

Analysis of analogue models by helical X-ray computed tomography

The aim of analogue model experiments in geology is to simulate structures in nature under specific imposed boundary conditions using materials whose rheological properties are similar to those of rocks in nature. In the late 1980s, X-ray computed tomography (CT) was first applied to the analysis of such models. In early studies only a limited number of cross-sectional slices could be recorded because of the time involved in CT data acquisition, the long cooling periods for the X-ray source and computational capacity. Technological improvements presently allow an almost unlimited number of closely spaced serial cross-sections to be acquired and calculated. Computer visualization software allows a full 3D analysis of every recorded stage. Such analyses are especially valuable when trying to understand complex geological structures, commonly with lateral changes in 3D geometry. Periodic acquisition of volumetric data sets in the course of the experiment makes it possible to carry out a 4D analysis of the model, i.e. 3D analysis through time. Examples are shown of 4D analysis of analogue models that tested the influence of lateral rheological changes on the structures obtained in contractional and extensional settings.

Shell preservation of Limacina inflata in surface sediments of the Central and South Atlantic

Over 300 surface sediment samples from the Central and South Atlantic Ocean and the Caribbean Sea were investigated for the preservation state of the aragonitic test of Limacina inflata. Results are displayed in spatial distribution maps and are plotted against cross-sections of vertical water mass configurations, illustrating the relationship between preservation state, saturation state of the overlying waters, and overall water mass distribution. The microscopic investigation of L. inflata (adults) yielded the Limacina dissolution index (LDX), and revealed three regional dissolution patterns. In the western Atlantic Ocean, sedimentary preservation states correspond to saturation states in the overlying waters. Poor preservation is found within intermediate water masses of southern origin (i.e. Antarctic intermediate water (AAIW), upper circumpolar water (UCDW)), which are distinctly aragonite-corrosive, whereas good preservation is observed within the surface waters above and within the upper North Atlantic deep water (UNADW) beneath the AAIW. In the eastern Atlantic Ocean, in particular along the African continental margin, the LDX fails in most cases (i.e. less than 10 tests of L. inflata per sample were found). This is most probably due to extensive "metabolic" aragonite dissolution at the sediment-water interface combined with a reduced abundance of L. inflata in the surface waters. In the Caribbean Sea, a more complex preservation pattern is observed because of the interaction between different water masses, which invade the Caribbean basins through several channels, and varying input of bank-derived fine aragonite and magnesian calcite material. The solubility of aragonite increases with increasing pressure, but aragonite dissolution in the sediments does not simply increase with water depth. Worse preservation is found in intermediate water depths following an S-shaped curve. As a result, two aragonite lysoclines are observed, one above the other. In four depth transects, we show that the western Atlantic and Caribbean LDX records resemble surficial calcium carbonate data and delta13C and carbonate ion concentration profiles in the water column. Moreover, preservation of L. inflata within AAIW and UCDW improves significantly to the north, whereas carbonate corrosiveness diminishes due to increased mixing of AAIW and UNADW. The close relationship between LDX values and aragonite contents in the sediments shows much promise for the quantification of the aragonite loss under the influence of different water masses. LDX failure and uncertainties may be attributed to (1) aragonite dissolution due to bottom water corrosiveness, (2) aragonite dissolution due to additional CO2 release into the bottom water by the degradation of organic matter based on an enhanced supply of organic matter into the sediment, (3) variations in the distribution of L. inflata and hence a lack of supply into the sediment, (4) dilution of the sediments and hence a lack of tests of L. inflata, or (5) redeposition of sediment particles.

The half-life of Be¹⁰ /

Includes bibliographical references.

Nuclear data for low-power research reactors /

The atomic energy authorities of Canada, the United Kingdom, and the United States have agreed to the public release of certain information on low-power research reactors, including those nuclear properties of uranium of importance to the design and operation of such reactors. The following report is the officially released data.

Scientific report : RF Project 464 /

1. The determination and interpretation of electronic collision cross sections -- 2. An electron spectrometer for the study of inelastic collision cross sections -- 3. The inelastic scattering of electrons by helium -- 4. Inelastic collision cross sections of carbon monoxide -- 5. An electron impact study of nitrogen in the kinetic energy range 400 to 600 volts -- 6. Electronic collision cross sections and oscillator strengths for oxygen in the Schumann-Runge region -- 7. Electronic collision cross sections for oxygen at excitation energies above 10 volts -- 8. Electronic collsion cross sections for nitrogen at excitation energies from 10 to 80 electron volts -- 9. Additional collision cross sections for helium, especially in the ionized continuum -- 10. A collision cross section study of CO₂, with a theoretical study of two transitions -- 11. Further developments in the theory and use of the electron spectrometer -- 12. Electronic collision cross sections of water vapor.

Selected reference material, United States atomic energy program.

v. 1. Research reactors.--v. 2. Reactor handbook: physics.--v. 3. Reactor handbook: engineering.--v. 4. Reactor handbook: materials.--v. 5. Neutron cross sections.--v. 6. Chemical processing and equipment.--v. 7. Eight-year isotope summary.--v. 8. Information sources.

Proceedings.

Cover title: Peaceful uses of atomic energy.

Design for garden pool; grounds of Mr. J.A. Allison

Black and red ink on tracing paper. Plan and detailed cross-sections of pool and drainage details with measurements and materials specified. Signed. 72 cm. x 51 cm. Scale: 1/2 " = 1'. [Marion College] [from photographic copy by Lance Burgharrdt]