Multimodal approach in the use of clinical scoring, morphological MRI and biochemical T2-mapping and diffusion-weighted imaging in their ability to assess differences between cartilage repair tissue after microfracture therapy and matrix-associated autologous chondrocyte transplantation: a pilot study

OBJECTIVE: The aim of the present pilot study is to show initial results of a multimodal approach using clinical scoring, morphological magnetic resonance imaging (MRI) and biochemical T2-relaxation and diffusion-weighted imaging (DWI) in their ability to assess differences between cartilage repair tissue after microfracture therapy (MFX) and matrix-associated autologous chondrocyte transplantation (MACT). METHOD: Twenty patients were cross-sectionally evaluated at different post-operative intervals from 12 to 63 months after MFX and 12-59 months after MACT. The two groups were matched by age (MFX: 36.0+/-10.4 years; MACT: 35.1+/-7.7 years) and post-operative interval (MFX: 32.6+/-16.7 months; MACT: 31.7+/-18.3 months). After clinical evaluation using the Lysholm score, 3T-MRI was performed obtaining the MR observation of cartilage repair tissue (MOCART) score as well as T2-mapping and DWI for multi-parametric MRI. Quantitative T2-relaxation was achieved using a multi-echo spin-echo sequence; semi-quantitative diffusion-quotient (signal intensity without diffusion-weighting divided by signal intensity with diffusion weighting) was prepared by a partially balanced, steady-state gradient-echo pulse sequence. RESULTS: No differences in Lysholm (P=0.420) or MOCART (P=0.209) score were observed between MFX and MACT. T2-mapping showed lower T2 values after MFX compared to MACT (P=0.039). DWI distinguished between healthy cartilage and cartilage repair tissue in both procedures (MFX: P=0.001; MACT: P=0.007). Correlations were found between the Lysholm and the MOCART score (Pearson: 0.484; P=0.031), between the Lysholm score and DWI (Pearson:-0.557; P=0.011) and a trend between the Lysholm score and T2 (Person: 0.304; P=0.193). CONCLUSION: Using T2-mapping and DWI, additional information could be gained compared to clinical scoring or morphological MRI. In combination clinical, MR-morphological and MR-biochemical parameters can be seen as a promising multimodal tool in the follow-up of cartilage repair.

Declaration on the Three-Step Test: Where do we go from here?

The “Declaration on a balanced interpretation of the ‘Three-Step Test’” as such cannot solve the problem of lacking limitations; however, it emphasizes that the existing international legislation does not prohibit further amendments to copyright law. Nations that dispose of the political will are in a position to introduce new limitations. In addition, further international agreements focusing on new limitations may be negotiated among those countries that are ready to do so.

The Right to Be Forgotten More Than a Pandora’s Box?

Recently, political voices have stressed the need to introduce a right to be forgotten as new human right. Individuals should have the right to make potentially damaging information disappear after a certain time has elapsed. Such new right, however, can come in conflict with the principle of free speech. Therefore, its scope needs to be evaluated in the light of appropriate data protection rules. Insofar, a more user-centered approach is to be realized. “Delete” can not be a value as such, but must be balanced within a new legal framework.

EU Commission: Comments on the “Opinion of European Academics on Anti-Counterfeiting Trade Agreement”

The “Opinion of European Academics on Anti-Counterfeiting Trade Agreement” (ACTA) of February 11, 2011, was published in 2 JIPITEC 65 (2011). Signed by more than 25 law professors and academics from across Europe who specialize in the field, this opinion addressed the following concern: Although it is uncontested that the infringement of intellectual property rights, especially in the Internet, prejudices the legitimate interests of right holders, it is still very controversial in Europe and abroad whether the enforcement standards of ACTA are balanced. The European Commission, DG Trade, has now published a document with detailed comments on the Opinion. The comments, which are also available on the website of the European Commission [http://trade.ec.europa.eu/doclib/ html/147853.htm], are republished here with the kind permission of the European Commission.

Not for Designers: On the Inadequacies of EU Design Law and How to Fix It

Design rights represent an interesting example of how the EU legislature has successfully regulated an otherwise heterogeneous field of law. Yet this type of protection is not for all. The tools created by EU intervention have been drafted paying much more attention to the industry sector rather than to designers themselves. In particular, modern, digitally based, individual or small-sized, 3D printing, open designers and their needs are largely neglected by such legislation. There is obviously nothing wrong in drafting legal tools around the needs of an industrial sector with an important role in the EU economy, on the contrary, this is a legitimate and good decision of industrial policy. However, good legislation should be fair, balanced, and (technologically) neutral in order to offer suitable solutions to all the players in the market, and all the citizens in the society, without discriminating the smallest or the newest: the cost would be to stifle innovation. The use of printing machinery to manufacture physical objects created digitally thanks to computer programs such as Computer-Aided Design (CAD) software has been in place for quite a few years, and it is actually the standard in many industrial fields, from aeronautics to home furniture. The change in recent years that has the potential to be a paradigm-shifting factor is a combination between the opularization of such technologies (price, size, usability, quality) and the diffusion of a culture based on access to and reuse of knowledge. We will call this blend Open Design. It is probably still too early, however, to say whether 3D printing will be used in the future to refer to a major event in human history, or instead will be relegated to a lonely Wikipedia entry similarly to ³Betamax² (copyright scholars are familiar with it for other reasons). It is not too early, however, to develop a legal analysis that will hopefully contribute to clarifying the major issues found in current EU design law structure, why many modern open designers will probably find better protection in copyright, and whether they can successfully rely on open licenses to achieve their goals. With regard to the latter point, we will use Creative Commons (CC) licenses to test our hypothesis due to their unique characteristic to be modular, i.e. to have different license elements (clauses) that licensors can choose in order to adapt the license to their own needs.”

Enforcing Copyright Infringements Online: In Search of Balanced Private International Law Rules

Enforcement of copyright online and fighting online “piracy” is a high priority on the EU agenda. Private international law questions have recently become some of the most challenging issues in this area. Internet service providers are still uncertain how the Brussels I Regulation (Recast) provisions would apply in EU-wide copyright infringement cases and in which country they can be sued for copyright violations. Meanwhile, because of the territorial approach that still underlies EU copyright law, right holders are unable to acquire EU-wide relief for copyright infringements online. This article first discusses the recent CJEU rulings in the Pinckney and Hejduk cases and argues that the “access approach” that the Court adopted for solving jurisdiction questions could be quite reasonable if it is applied with additional legal measures at the level of substantive law, such as the targeting doctrine. Secondly, the article explores the alternatives to the currently established lex loci protectionis rule that would enable right holders to get EU-wide remedies under a single applicable law. In particular, the analysis focuses on the special applicable law rule for ubiquitous copyright infringements, as suggested by the CLIP Group, and other international proposals.

EU Copyright Law, Lobbying and Transparency of Policy-Making: The cases of sound recordings term extension and orphan works provisions

The objective of this paper is to discuss EU lobbying in the area of copyright. Legislation needs to regulate the legal position of various different stakeholders in a balanced manner. However, a number of EU copyright provisions brought into effect over recent years were highly controversial and have led to suggestions that powerful lobbying forces may have had some influence. This article investigates the effects of lobbying on copyright law-making in Europe. A specific comparative and multi-faceted analysis is provided of the legislative process for two recently adopted directives: 2011/77/EU which extends the term of protection of sound recordings and 2012/28/EU which introduces certain permitted uses of orphan works (some references are also made to the ACTA case). Firstly, a short presentation is given of the legal bases for the EU consultation process and lobbying. Next, an analysis is provided of the two cases, taking into consideration the policy-making procedures (with special focus on how the consultation process was handled), the legal solutions proposed and adopted and the various stakeholders’ claims. Lastly, it asks why some interest groups were successful and some others failed (the analysis identifies two types of factor for the effectiveness of lobbying: those resulting from stakeholders’ actions and those connected with the consultation process).

The Role of Small and Medium-sized Centers for Territorial Development in Switzerland

This paper describes the role of small and medium-sized urban centers in Switzerland. Switzerland is a highly urbanized country where small and medium-sized urban centers play an important role in ensuring a balanced national urban system. Besides the four largest metropolitan regions （Zurich, Geneva, Basel and Bern）, small and medium-sized towns function as central places for a wider, often extensive hinterland. They provide opportunities for living and working and they connect rural and mountain regions to national and international networks. Using secondary statistics and a case study, the paper shows that small and medium-sized urban centers are home to significant concentrations of export-oriented industries. Firms in these value-adding secondary sectors are rooted in these places and benefit from strong local embeddedness while also being oriented towards global markets. Small and medium-sized urban centers also profit from their strong local identities. While these places face various challenges, they function as important pillars in creating a balanced regional development pattern. Swiss regional development policy follows the goal of polycentric spatial development and it employs various instruments that aim to ensure a balanced urban system.

Peri-implant soft tissue conditioning with provisional restorations in the esthetic zone: the dynamic compression technique

An optimal esthetic implant restoration is a combination of a visually pleasing prosthesis and surrounding peri-implant soft tissue architecture. This article introduces a clinical method, the dynamic compression technique, of conditioning soft tissues around bone-level implants with provisional restorations in the esthetic zone. The technique has several goals: to establish an adequate emergence profile; to recreate a balanced mucosa course and level in harmony with the gingiva of the adjacent teeth, including papilla height/width, localization of the mucosal zenith and the tissue profile's triangular shape; as well as to establish an accurate proximal contact area with the adjacent tooth/implant crown.