Reproducibility of microhandeness measurements in different surfices

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of light source and immersion media in surface roughness and hardness of a nanofilled composite resin

The study evaluated the influence of light curing units and immersion media on superficial roughness and microhardness of the nanofilled composite resin Supreme XT (3M/ESPE). Light curing units used were: XL 3000 (3M/ESPE), Jet Lite 4000 Plus (JMorita) and Ultralume Led 5 (Ultradent) and immersion media were artificial saliva, Coke®, tea and coffee, totaling 12 experimental groups. Specimens (10mm x 2mm) were immersed in each respective solution for 5 seconds, three times a day, during 60 days and so, were submitted to measure of superficial roughness (Ra) and Vickers hardness. Data were subjected to two-way ANOVA test (p<0.05). Results showed that only the light source factor showed statistically difference for hardness. It was observed that the hardness of the composite resin Filtek Supreme XT (3M/ESPE) was influenced by the light source (p<0.01) independently of the immersion media (p= 0.35) and the Jet Lite 4000 Plus (JMorita) was the light curing unit that presented lower values. In relation to surface roughness, it was noted no-significant statistical difference for light source (p=0.84), when specimens were immersed in different beverages (p=0.35).

Color stability of a nanofilled resin: influence of polishing and finishing and fluoride solutions according to time

Aim: The aim of the study was evaluate the finishing and polishing effect of the color stability of the composite resin Filtek Supreme XT, according to different fluoride solutions and time. Material and Methods: Specimens were prepared (n=140) with half of the samples finished and polished. The experimental groups were divided according to the presence or absence of finishing and polishing and immersion solutions (artificial saliva, sodium fluoride solution at 0.05% - manipulated, Fluordent Reach, Oral B, Fluorgard). The specimens remained in artificial saliva for 24 hours and were subjected to an initial color analysis using a spectrophotometer CIELab system. Then, they were immersed in the experimental solutions for 1 minute a day. The readings of the color change were made after 24 and 48 hours, 7, 14, 21, 30 and 60 days after the first immersion. The three-way mixed Analysis of Variance (ANOVA) ("finishing/polishing", "immersion medium" and “time”) were performed. For multiple comparisons, the Sidak test for repeated measure was used, with a 5% level of significance. Results: The finishing and polishing factor showed significant variability, independently of the immersion media (p<0.001). Cconclusion: Finishing and polishing procedures yielded better color stability to composite resin over time, regardless of the immersion media.

Chemical and morphological features of dental composite resin: influence of light curing units and immersion media

Aims: The study evaluated the influence of light curing units and immersionmedia on superficial morphology and chemistry of the nanofilled composite resin Supreme XT (3M)through the EDX analysis and SEM evaluation. Light curing units with different power densitiesand mode of application used were XL 3000 (480 mW/cm2), Jet Lite 4000 Plus (1230mW/cm2), andUltralume Led 5 (790 mW/cm2) and immersion media were artificial saliva, Coke1, tea and coffee,totaling 12 experimental groups. Specimens (10 mm 3 2 mm) were immersed in each respectivesolution for 5 min, three times a day, during 60 days and stored in artificial saliva at 378C 6 18Cbetween immersion periods. Topography and chemical analysis was qualitative. Findings: Groupsimmersed in artificial saliva, showed homogeneous degradation of matrix and deposition of calciumat the material surface. Regarding coffee, there was a reasonable chemical degradation with loss ofload particles and deposition of ions. For tea, superficial degradation occurred in specific areaswith deposition of calcium, carbon, potassium and phosphorus. For Coke1, excessive matrix degra-dation and loss of load particles with deposition of calcium, sodium, and potassium. Conclusion:Light curing units did not influence the superficial morphology of composite resin tested, but theimmersion beverages did. Coke1affected material’s surface more than did the other tested drinks.Microsc. Res. Tech. 73:176–181, 2010.

Reparo de uma restauração classe IV com o uso de resina composta nanoparticulada: quatro anos de acompanhamento

O aprimoramento da odontologia estética restauradora está ligado ao desenvolvimento de materiais e técnicas inovadoras, os quais podem oferecer diversos benefícios, incluindo a integração cromática, policromatismo, forma anatômica, função, adequado contato proximal e aumento da integridade marginal. Em função desses aspectos, as restaurações de resina composta, aplicadas de forma direta, tendem a ganhar maior longevidade. Assim, o objetivo do presente relato de caso é fornecer ao leitor a visão dos desafios restauradores envolvidos no reparo de uma fratura classe IV de um dente incisivo superior, utilizando-se um novo sistema de resina composta híbrida nanoparticulada (FiltekTM Supreme - 3M ESPE). Resultados: com base no referido material e técnica, otimizamos a obtenção de resultados satisfatórios alcançados por meio da utilização adequada do sistema adesivo e resina composta, mantidos com sucesso após o acompanhamento de 4 anos. Conclusão: pode-se concluir que, interagindo técnica adequada de aplicação, princípios adesivos básicos e materiais de qualidade, o clínico pode garantir o sucesso na restauração da forma, função e estética de dentes anteriores.

O dever moral e o valor das ações humanas segundo Kant

The study aims at approaching the duty concept (Sollen) within Kant´s moral philosophy. Taking into account the notion of moral duty as one of the central concepts in (and to) Kant's practical thought, and in an attempt to offer an elucidation of Kant’s quest (and development) by the supreme principle of moral – the fundaments of the moral value´s detaining action, we will investigate: i) what characterizes one action for duty, in Kant’s moral thought and, ii) why exactly, according to Kant, just the action, precisely for duty, is the only action with the genuine value, namely, the moral value.

O lugar e a especificidade da educação na filosofia prática de Kant

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Liberdade de imprensa no Supremo Tribunal Federal: análise comparativa com a Suprema Corte dos Estados Unidos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dental bleaching with a 10% hydrogen peroxide product: a six-month clinical observation

Context: The possibility of bleaching vital teeth with peroxide-based products considerably revolutionized esthetic dentistry. Aim: The aim of this clinical study was to evaluate tooth color change and dental sensitivity after exposure to preloaded film containing a 10% hydrogen peroxide whitening system (Opalescence Trθswhite Supreme). Materials and Methods: A total of 13 volunteers, aged 18 to 25 years, participated in this study. The patients used the whitening system once a day for 60 minutes during the 8-day study. For maxillary incisors and canines, the color change was visually evaluated with the Vita color scale before, immediately, and six months after the treatment. Tooth sensitivity was evaluated during the daily gel applications. All whitening applications were done in office and under the supervision of a dental professional. Statistical Analysis Used: The results were analyzed using the Friedman Test (nonparametric repeated measures ANOVA) at a level of 5%, and Dunn's Multiple Comparison Test at the level of 5%. Results: It was verified that the original mean color values observed at the baseline analysis differed significantly from those observed immediately after bleaching, as well as from those seen in the analysis at six months ( P = 0.001). There was no significant difference between the mean color values observed in the immediate time and in the analysis at six months ( P = 0.474). No tooth sensitivity was observed in any patients. Conclusion: It was concluded that the bleaching technique using the 10% hydrogen peroxide system was effective in a short period of time without tooth sensitivity during applications.

A liberdade de imprensa vista pelo Supremo Tribunal Federal: análise da ADPF n. 130

The present study aims to present and analyze the ruling of the Brazilian Supreme Court in ADPF 130 (Concentrated constitutional review action, Fundamental Precept Infringement, Argüição de Descumprimento de Preceito Fundamental), proposed by Partido Democrático Trabalhista (PDT), which contests the compatibility of statute 5.250/67 with the Federal Constitution of 1988. This work considers that the judicial ruling is different than the approach taken by the Legislative and Executive powers, arguing that there is, in the Judiciary, a peculiar way for ruling, surrounded by mysteries, rites, secrets, pomp and circunstances unintelligible to layman. To reach the proposed goal, Justice Carlos Brito´s report and opinion on ADPF 130 are analyzed. The choice of giving special attention to this opinion, which favors the declaration of unconstitutionality of the 5.250/67 statute, is justified in that it represents agreement with the allegation of disrespect to the constitutional text, as suggested by the Partido Democrático Trabalhista. The arguments put forth by the presiding Justice on his ruling will also be the object of consideration, as well as some possible consequences of the ruling.

A regulação constitucional da Comunicação Social e a efetivação de suas normas

The media received from Brazilian Constitution an extensive regulatory role, however, despite the constitutional requirement, until these days, over twenty years after its promulgation, the Brazilian Congress hasn’t regulated all constitutional rules for the sector. In addition, some rules related to the media that were produced before and after the Constitution were expurgated by Brazilian Supreme Court decisions. This text is part of ongoing research that aims to present the constitutional regulation of the media and the development/implementation of these legal standards through decisions of the Supreme Court.

Desenvolvimento de modelo auto-regressivo para previsão em pronto-atendimento

The 1988 constitution makes an life is a supreme good when increased health as the fundamental condition requiring that all ill patient has the right to be treated in a public hospital (CF, art. 196). In this sense, the goal of this work is to generate a weekly forecast of hospital care by means of an advanced prediction model. It is expected that the model of self-regressivas seasonal moving averages SARIMA generate reliable and adherent to issue forecasts analyzed, thus enabling better resource allocation and more efficient hospital management

Desenvolvimento de modelo auto-regressivo para previsão em pronto-atendimento

The 1988 constitution makes an life is a supreme good when increased health as the fundamental condition requiring that all ill patient has the right to be treated in a public hospital (CF, art. 196). In this sense, the goal of this work is to generate a weekly forecast of hospital care by means of an advanced prediction model. It is expected that the model of self-regressivas seasonal moving averages SARIMA generate reliable and adherent to issue forecasts analyzed, thus enabling better resource allocation and more efficient hospital management

Chemical and morphological features of nanofilled composite resin: Influence of finishing and polishing procedures and fluoride solutions

This study evaluated the influence of finishing and polishing procedures and different fluoride solutions on superficial morphology and chemistry of the nanofilled composite resin Supreme XT (3M) through the EDX analysis and SEM evaluation. Circular specimens (n = 30) of 10 mm diameter and 2 mm thickness were prepared, with half of the sample assays finished and polished with Super-Snap (R) sandpaper. The experimental groups were divided according to the presence or absence of finishing and polishing and solutions (artificial saliva, 0.05% of manipulated sodium fluoride solution, Fluordent Reach, Oral B, Fluorgard). Specimens were immersed in each respective solution for 1 min per day, during 60 days and stored in artificial saliva at 37 +/- 1 degrees C between immersion periods. Topography and chemical analysis was qualitative. It was observed that specimens submitted to finishing and polishing procedures had lower superficial degradation. Fluoride solutions promoted superficial alterations on specimens, being the highest degradation obtained with Fluordent Reach. It can be concluded that finishing and polishing procedures and the immersion media influence the superficial morphology of composite resin tested; the Fluordent Reach was the fluoride solution that most affected the material's surface. Microsc. Res. Tech. 2011., (c) 2011 Wiley Periodicals, Inc.

The filler content of the dental composite resins and their influence on different properties

The purpose of this study was to compare the inorganic content and morphology of one nanofilled and one nanohybrid composite with one universal microhybrid composite. The Vickers hardness, degree of conversion and scanning electron microscope of the materials light-cured using LED unit were also investigated. One nanofilled (Filtek (TM) Supreme XT), one nanohybrid (TPH (R) 3) and one universal microhybrid (Filtek (TM) Z-250) composite resins at color A2 were used in this study. The samples were made in a metallic mould (4 mm in diameter and 2 mm in thickness). Their filler weight content was measured by thermogravimetric analysis (TG). The morphology of the filler particles was determined using scanning electron microscope equipped with a field emission gun (SEM-FEG). Vickers hardness and degree of conversion using FT-IR spectroscopy were measured. Filtek (TM) Z-250 (microhybrid) composite resin shows higher degree of conversion and hardness than those of Filtek (TM) Supreme XT (nanofilled) and TPH (R) 3 (nanohybrid) composites, respectively. The TPH3 (R) (nanohybrid) composite exhibits by far the lowest mechanical property. Nanofilled composite resins show mechanical properties at least as good as those of universal hybrids and could thus be used for the same clinical indications as well as for anterior restorations due to their high aesthetic properties. Microsc. Res. Tech. 75:758765, 2012. (C) 2011 Wiley Periodicals, Inc