Robustness of corroded reinforced concrete structures. A structural performance approach

Structure and Infrastructure Engineering, 1-17

Molecular analysis of the dengue virus type 1 and 2 in Brazil based on sequences of the genomic envelope-nonstructural protein 1 junction region

The genomic sequences of the Envelope-Non-Structural protein 1 junction region (E/NS1) of 84 DEN-1 and 22 DEN-2 isolates from Brazil were determined. Most of these strains were isolated in the period from 1995 to 2001 in endemic and regions of recent dengue transmission in São Paulo State. Sequence data for DEN-1 and DEN-2 utilized in phylogenetic and split decomposition analyses also include sequences deposited in GenBank from different regions of Brazil and of the world. Phylogenetic analyses were done using both maximum likelihood and Bayesian approaches. Results for both DEN-1 and DEN-2 data are ambiguous, and support for most tree bipartitions are generally poor, suggesting that E/NS1 region does not contain enough information for recovering phylogenetic relationships among DEN-1 and DEN-2 sequences used in this study. The network graph generated in the split decomposition analysis of DEN-1 does not show evidence of grouping sequences according to country, region and clades. While the network for DEN-2 also shows ambiguities among DEN-2 sequences, it suggests that Brazilian sequences may belong to distinct subtypes of genotype III.

Crystallization and crystallographic analysis of the apo form of the orange protein (ORP) from desulfovibrio gigas

Acta Crystallographica Section F Structural Biology and Crystallization Communications Volume 65, Part 8

Structural adhesives modified with thermally expandable particles

In this study, the behaviour of two structural adhesives modified with thermally expandable particles (TEPs) was investigated as a preliminary study for further investigations on the potential of TEPs in adhesive joints. Tensile bulk tests were performed to get the tensile properties of the adhesives and TEPs-modified adhesives. In order to determine the expansion temperature of the particles while encapsulated in these particular adhesive systems, the variation of the volume of adhesive samples modified with different TEPs concentration as a function of temperature was measured. Further, the possibility of any chemical interactions between TEPs and adhesives matrix in the TEPs-modified specimens was verified by a Fourier transform infrared spectroscopy analysis. Finally, the fracture surfaces of the unmodified and TEPs-modified specimens, as well as the dispersion and the morphology of the particles, were examined by a scanning electron microscopy analysis. It was found that the stiffness of the TEPs-modified adhesives is not affected by incorporation of TEPs in the adhesives matrix, while the tensile yield strength decreased by increasing the wt% TEPs content. In applications of such particular materials (TEPs-modified adhesives), the temperature should be controlled to stay between 90°C and 120°C in order to obtain the highest expansion ratio. At a lower temperature, not all the particles will expand, and above, the TEPs will deteriorate and as a result the TEPs-modified adhesives will deteriorate.

Biosynthesis-Assisted Structural Elucidation of the Bartolosides, Chlorinated Aromatic Glycolipids from Cyanobacteria

The isolation of the bartolosides, unprecedented cyanobacterial glycolipids featuring aliphatic chains with chlorine substituents and C-glycosyl moieties, is reported. Their chlorinated dialkylresorcinol (DAR) core presented a major structural-elucidation challenge. To overcome this, we discovered the bartoloside (brt) biosynthetic gene cluster and linked it to the natural products through in vitro characterization of the DAR-forming ketosynthase and aromatase. Bioinformatic analysis also revealed a novel potential halogenase. Knowledge of the bartoloside biosynthesis constrained the DAR core structure by defining key pathway intermediates, ultimately allowing us to determine the full structures of the bartolosides. This work illustrates the power of genomics to enable the use of biosynthetic information for structure elucidation.

Reliability analysis of a timber truss system subjected to decay

Assessing the safety of existing timber structures is of paramount importance for taking reliable decisions on repair actions and their extent. The results obtained through semi-probabilistic methods are unrealistic, as the partial safety factors present in codes are calibrated considering the uncertainty present in new structures. In order to overcome these limitations, and also to include the effects of decay in the safety analysis, probabilistic methods, based on Monte-Carlo simulation are applied here to assess the safety of existing timber structures. In particular, the impact of decay on structural safety is analyzed and discussed, using a simple structural model, similar to that used for current semi-probabilistic analysis.

Strength and damage analysis of composite-aluminium adhesively-bonded single-lap joints

With the need to find an alternative way to mechanical and welding joints, and at the same time to overcome some limitations linked to these traditional techniques, adhesive bonds can be used. Adhesive bonding is a permanent joining process that uses an adhesive to bond the components of a structure. Composite materials reinforced with fibres are becoming increasingly popular in many applications as a result of a number of competitive advantages. In the manufacture of composite structures, although the fabrication techniques reduce to the minimum by means of advanced manufacturing techniques, the use of connections is still required due to the typical size limitations and design, technological and logistical aspects. Moreover, it is known that in many high performance structures, unions between composite materials with other light metals such as aluminium are required, for purposes of structural optimization. This work deals with the experimental and numerical study of single lap joints (SLJ), bonded with a brittle (Nagase Chemtex Denatite XNRH6823) and a ductile adhesive (Nagase Chemtex Denatite XNR6852). These are applied to hybrid joints between aluminium (AL6082-T651) and carbon fibre reinforced plastic (CFRP; Texipreg HS 160 RM) adherends in joints with different overlap lengths (LO) under a tensile loading. The Finite Element (FE) Method is used to perform detailed stress and damage analyses allowing to explain the joints’ behaviour and the use of cohesive zone models (CZM) enables predicting the joint strength and creating a simple and rapid design methodology. The use of numerical methods to simulate the behaviour of the joints can lead to savings of time and resources by optimizing the geometry and material parameters of the joints. The joints’ strength and failure modes were highly dependent on the adhesive, and this behaviour was successfully modelled numerically. Using a brittle adhesive resulted in a negligible maximum load (Pm) improvement with LO. The joints bonded with the ductile adhesive showed a nearly linear improvement of Pm with LO.

An NMR structural study of nickel-substituted rubredoxin

J Biol Inorg Chem (2010) 15:409–420 DOI 10.1007/s00775-009-0613-6

Membrane structural changes support the involvement of mitochondria in the bile salt-induced apoptosis of rat hepatocytes

Clin Sci (Lond). 2002 Nov;103(5):475-85

Integrated study by NMR and X-ray Crystallography on the analysis of the molecular interactions in heme-binding proteins

Dissertação para obtenção do Grau de Doutor em Bioquímica, Especialidade Bioquímica Estrutural

Institutions and firm formation: An empirical analysis of Portuguese municipalities

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics

Structural time series models and the Kalman filter: A concise review

The continued increase in availability of economic data in recent years and, more importantly, the possibility to construct larger frequency time series, have fostered the use (and development) of statistical and econometric techniques to treat them more accurately. This paper presents an exposition of structural time series models by which a time series can be decomposed as the sum of a trend, seasonal and irregular components. In addition to a detailled analysis of univariate speci fications we also address the SUTSE multivariate case and the issue of cointegration. Finally, the recursive estimation and smoothing by means of the Kalman filter algorithm is described taking into account its different stages, from initialisation to parameter s estimation.

STRUCTURE-FUNCTION ANALYSIS OF MULTI-COPPER OXIDASES

Dissertation presented to obtain the Ph.D degree in Biochemistry, Structural Biochemistry

Cohesion decay: quantitative analysis of partial sister chromatid cohesion

Cell division is a highly dynamic process where sister chromatids remain associated with each other from the moment of DNA replication until the later stages of mitosis, giving rise to two daughter cells with equal genomes. The “molecular glue” that links sister DNA molecules is called cohesin, a tripartite ring-like protein complex composed of two Structural Maintenance of Chromosome proteins (Smc1 and Smc3) bridged by a kleisin subunit Rad21/Scc1, that together prevent precocious sister chromatid separation. Accumulating evidence has suggested that cohesion decay may be the cause of segregation errors that underlie certain human pathologies. However it remains to be determined how much cohesin loss abolishes functional sister chromatid cohesion. To answer these questions, we have developed different experimental conditions aiming to titrate the levels of cohesin on mitotic chromosomes in a precise manner. Using these tools, we will determine the minimal amount of cohesin needed to confer functional cohesion. The approaches described here take advantage of a system in Drosophila melanogaster where the Tobacco Etch Virus (TEV) protease can cleave the Rad21 subunit of cohesin leading to precocious sister chromatid separation. Firstly, we tried to express different levels of TEV protease to obtain partial loss of cohesion. However, this approach has failed to produce systematic different levels of sister chromatid separation. Most of the work was therefore focused on a second strategy, for which we established strains with different levels of cohesin sensitive/cohesin resistant to TEV protease. Strains containing different amounts of functional cohesin (TEV resistant) were tested by in vitro cleavage and by in vivo injections in embryos for their ability to promote sister chromatid cohesion. Our results reveal that removal of half of the cohesin complexes does not impair chromosome segregation, implying that chromosome cohesion is less sensitive to cohesin amounts than previously anticipated.

Hepatitis C: sexual or intrafamilial transmission? Epidemiological and phylogenetic analysis of hepatitis C virus in 24 infected couples

The role of sexual or intrafamilial transmission of hepatitis C is controversial. A phylogenetic analysis was performed on the non-structural region 5B of the hepatitis C virus (NS5B-HCV). High percentages of homology (mean of 98.3%) were shown between the couples. Twenty (83.3%) of the 24 men but only two of the women (8.3%) reported having had sexually transmitted diseases during their lives. The risk factors for HCV acquisition were blood transfusion (10 couples), use of illegal injected drugs (17), use of inhalants (15), acupuncture (5) and tattoos (5). The shared use of personal hygiene items included toothbrushes between six couples (25%), razor blades between 16 (66.7%), nail clippers between 21 (87.5%) and manicure pliers between 14 (58.3%). The high degree of similarity of the hepatitis C virus genome supports the hypothesis of hepatitis C virus transmission between these couples. The shared use of personal hygiene items suggests the possibility of intrafamilial transmission of infection.