Software for pattern recognition of the larvae of Aedes aegypti and Aedes albopictus

Software for pattern recognition of the larvae of mosquitoes Aedes aegypti and Aedes albopictus, biological vectors of dengue and yellow fever, has been developed. Rapid field identification of larva using a digital camera linked to a laptop computer equipped with this software may greatly help prevention campaigns.

Dynamic adaptation of interaction models for stateful web services

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

Constraint-based modelling of mixed microbial populations: Application to polyhydroxyalkanoates production

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

Formação em Gestão, Tradução, Localização e Testes de Projetos de Software

Relatório de Estágio apresentado para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Tradução – Especialização em Inglês

How enterprise 2,0 firms take advantage of emergent social software platforms to manage knowledge

This research aims to provide a better understanding on how firms stimulate knowledge sharing through the utilization of collaboration tools, in particular Emergent Social Software Platforms (ESSPs). It focuses on the distinctive applications of ESSPs and on the initiatives contributing to maximize its advantages. In the first part of the research, I have itemized all types of existing collaboration tools and classify them in different categories according to their capabilities, objectives and according to their faculty for promoting knowledge sharing. In the second part, and based on an exploratory case study at Cisco Systems, I have identified the main applications of an existing enterprise social software platform named Webex Social. By combining a qualitative and quantitative approach, as well as combining data collected from survey’s results and from the analysis of the company’s documents, I am expecting to maximize the outcome of this investigation and reduce the risk of bias. Although effects cannot be universalized based on one single case study, some utilization patterns have been underlined from the data collected and potential trends in managing knowledge have been observed. The results of the research have also enabled identifying most of the constraints experienced by the users of the firm’s social software platform. Utterly, this research should provide a primary framework for firms planning to create or implement a social software platform and for firms willing to increase adoption levels and to promote the overall participation of users. It highlights the common traps that should be avoided by developers when designing a social software platform and the capabilities that it should inherently carry to support an effective knowledge management strategy.

Criação de software para análise do batimento ciliar em peixe-zebra

O peixe-zebra é utilizado como modelo vertebrado para estudos in vivo de diversas patologias de origem genética. Neste trabalho pretendeu-se estudar a discinesia ciliar primária através do estudo in vivo do organizador da esquerda-direita destes peixes, conhecido por vesícula de Kupffer. Em particular, após análise de sequências de imagens captadas a alta velocidade, avaliou-se o com-portamento dinâmico de cílios normais e comparou-se com o de cílios com alte-rações genéticas com o objectivo de melhor compreender os processos que in-fluenciam a localização assimétrica dos órgãos internos, associados a esta doen-ça. De vídeos obtidos por microscopia de alta velocidade do interior da vesí-cula de Kupffer foram analisados 32 cílios, sendo 8 normais e os restantes cílios pertencentes a três alterações genéticas diferentes: subexpressão de Pkd2, so-brexpressão de Arl13b e mutação no gene deltaD. Para cada cílio calculou-se a frequência de batimento e caracterizou-se quantitativamente o movimento. Esta última análise teve como base a segmentação manual do cílio em quatro pontos definindo a base, o meio e a ponta. De seguida, estudou-se a dinâmica de cada uma das rectas constituídas por estas três estruturas ao longo do tempo. Com recurso à análise estatística ANOVA podemos comprovar diferenças no movi-mento entre os cílios alterados quando comparados com os normais. A análise da frequência demonstrou que todos os cílios estudados possu-em uma frequência média 34,9 Hz. Demonstrou-se ainda que, quando compa-rados com cílios normais, os cílios Pkd2 possuem um movimento 60% mais rí-gido, os Alr13b são caracterizados por amplitudes angulares 26% superiores no seu movimento e, por fim, a relação entre as amplitudes base/meio é 23% supe-rior nos cílios Delta D. Para implementar estes estudos, desenvolveu-se uma ferramenta baseada num plugin para ImageJ conjuntamente com códigos em R, que poderá vir a ser utilizada em investigações da discinesia ciliar primária em peixes-zebra.

Modelação não linear de estruturas metálicas e mistas em situação de incêndio no software OpenSees

Os incêndios em edifícios representam um fenómeno que pode ter consequências devastadoras quando não controlado, não só em termos de perdas de vidas humanas, como em termos económicos. No passado, a ocorrência de incêndios de grandes dimensões mostrou os efeitos do fogo descontrolado nos edifícios, assim como a ineficiência dos meios de segurança ativa ao fogo. Nas últimas duas décadas, estas questões motivaram o estudo e compreensão da ação dos incêndios nas estruturas dos edifícios. Neste trabalho estuda-se a modelação da ação do fogo em estruturas metálicas e mistas, com o objetivo de contribuir para a sua melhor caracterização. A presente tese foca-se na validação e compreensão da implementação de análises termo-mecânicas a estruturas mistas no software de elementos finitos OpenSees (Open System for Earthquake Engineering Simulation), contribuindo assim para futuros estudos, não só de análises de estruturas mistas sujeitas a incêndio, mas também de análises de estruturas mistas sujeitas a eventos consecutivos, como sismo seguido de incêndio. Neste trabalho é feita uma breve descrição do fenómeno fogo, assim como dos processos inerentes à dinâmica de um incêndio que constituem uma fonte de incerteza para a modelação de cenários de incêndio num edifício. Posto isto, são abordados alguns modelos de incêndios presentes nos Eurocódigos, assim como o recente modelo de fogos móveis(“Travelling fires”). São realizados exemplos de aplicação no software e dois casos de estudo. O primeiro consiste na modelação de dois ensaios ao fogo realizados na Alemanha em 1986 em estruturas metálicas à escala 1/4. O segundo consiste na modelação de um ensaio ao fogo a uma viga de betão armado simplesmente apoiada, realizado no Instituto Superior Técnico em 2010. Os modelos numéricos desenvolvidos no OpenSees contabilizam as não linearidades físicas e geométricas, com elementos finitos de plasticidade distribuída e com uma formulação baseada em deslocamentos. Os resultados numéricos são então comparados com os experimentais, de modo a validar as análises termo-mecânicas no OpenSees.

A solution for estimates in software development projects

The Corporate world is becoming more and more competitive. This leads organisations to adapt to this reality, by adopting more efficient processes, which result in a decrease in cost as well as an increase of product quality. One of these processes consists in making proposals to clients, which necessarily include a cost estimation of the project. This estimation is the main focus of this project. In particular, one of the goals is to evaluate which estimation models fit the Altran Portugal software factory the most, the organization where the fieldwork of this thesis will be carried out. There is no broad agreement about which is the type of estimation model more suitable to be used in software projects. Concerning contexts where there is plenty of objective information available to be used as input to an estimation model, model-based methods usually yield better results than the expert judgment. However, what happens more frequently is not having this volume and quality of information, which has a negative impact in the model-based methods performance, favouring the usage of expert judgement. In practice, most organisations use expert judgment, making themselves dependent on the expert. A common problem found is that the performance of the expert’s estimation depends on his previous experience with identical projects. This means that when new types of projects arrive, the estimation will have an unpredictable accuracy. Moreover, different experts will make different estimates, based on their individual experience. As a result, the company will not directly attain a continuous growing knowledge about how the estimate should be carried. Estimation models depend on the input information collected from previous projects, the size of the project database and the resources available. Altran currently does not store the input information from previous projects in a systematic way. It has a small project database and a team of experts. Our work is targeted to companies that operate in similar contexts. We start by gathering information from the organisation in order to identify which estimation approaches can be applied considering the organization’s context. A gap analysis is used to understand what type of information the company would have to collect so that other approaches would become available. Based on our assessment, in our opinion, expert judgment is the most adequate approach for Altran Portugal, in the current context. We analysed past development and evolution projects from Altran Portugal and assessed their estimates. This resulted in the identification of common estimation deviations, errors, and patterns, which lead to the proposal of metrics to help estimators produce estimates leveraging past projects quantitative and qualitative information in a convenient way. This dissertation aims to contribute to more realistic estimates, by identifying shortcomings in the current estimation process and supporting the self-improvement of the process, by gathering as much relevant information as possible from each finished project.

Planning and verification of multipath routing protocols

Conventionally the problem of the best path in a network refers to the shortest path problem. However, for the vast majority of networks present nowadays this solution has some limitations which directly affect their proper functioning, as well as an inefficient use of their potentialities. Problems at the level of large networks where graphs of high complexity are commonly present as well as the appearing of new services and their respective requirements, are intrinsically related to the inability of this solution. In order to overcome the needs present in these networks, a new approach to the problem of the best path must be explored. One solution that has aroused more interest in the scientific community considers the use of multiple paths between two network nodes, where they can all now be considered as the best path between those nodes. Therefore, the routing will be discontinued only by minimizing one metric, where only one path between nodes is chosen, and shall be made by the selection of one of many paths, thereby allowing the use of a greater diversity of the present paths (obviously, if the network consents). The establishment of multi-path routing in a given network has several advantages for its operation. Its use may well improve the distribution of network traffic, improve recovery time to failure, or it can still offer a greater control of the network by its administrator. These factors still have greater relevance when networks have large dimensions, as well as when their constitution is of high complexity, such as the Internet, where multiple networks managed by different entities are interconnected. A large part of the growing need to use multipath protocols is associated to the routing made based on policies. Therefore, paths with different characteristics can be considered with equal level of preference, and thus be part of the solution for the best way problem. To perform multi-path routing using protocols based only on the destination address has some limitations but it is possible. Concepts of graph theory of algebraic structures can be used to describe how the routes are calculated and classified, enabling to model the routing problem. This thesis studies and analyzes multi-path routing protocols from the known literature and derives a new algebraic condition which allows the correct operation of these protocols without any network restriction. It also develops a range of software tools that allows the planning and the respective verification/validation of new protocols models according to the study made.

Development of principle culture medium formulations for Saccharomyces cerevisiae

Saccharomyces cerevisiae as well as other microorganisms are frequently used in industry with the purpose of obtain different kind of products that can be applied in several areas (research investigation, pharmaceutical compounds, etc.). In order to obtain high yields for the desired product, it is necessary to make an adequate medium supplementation during the growth of the microorganisms. The higher yields are typically reached by using complex media, however the exact formulation of these media is not known. Moreover, it is difficult to control the exact composition of complex media, leading to batch-to-batch variations. So, to overcome this problem, some industries choose to use defined media, with a defined and known chemical composition. However these kind of media, many times, do not reach the same high yields that are obtained by using complex media. In order to obtain similar yield with defined media the addition of many different compounds has to be tested experimentally. Therefore, the industries use a set of empirical methods with which it is tried to formulate defined media that can reach the same high yields as complex media. In this thesis, a defined medium for Saccharomyces cerevisiae was developed using a rational design approach. In this approach a given metabolic network of Saccharomyces cerevisiae is divided into a several unique and not further decomposable sub networks of metabolic reactions that work coherently in steady state, so called elementary flux modes. The EFMtool algorithm was used in order to calculate the EFM’s for two Saccharomyces cerevisiae metabolic networks (amino acids supplemented metabolic network; amino acids non-supplemented metabolic network). For the supplemented metabolic network 1352172 EFM’s were calculated and then divided into: 1306854 EFM’s producing biomass, and 18582 EFM’s exclusively producing CO2 (cellular respiration). For the non-supplemented network 635 EFM’s were calculated and then divided into: 215 EFM’s producing biomass; 420 EFM’s producing exclusively CO2. The EFM’s of each group were normalized by the respective glucose consumption value. After that, the EFMs’ of the supplemented network were grouped again into: 30 clusters for the 1306854 EFMs producing biomass and, 20 clusters for the 18582 EFM’s producing CO2. For the non-supplemented metabolic network the respective EFM’s of each metabolic function were grouped into 10 clusters. After the clustering step, the concentrations of the other medium compounds were calculated by considering a reasonable glucose amount and by accounting for the proportionality between the compounds concentrations and the glucose ratios. The approach adopted/developed in this thesis may allow a faster and more economical way for media development.

A CMMI-compliant requirements management and development process

Requirements Engineering has been acknowledged an essential discipline for Software Quality. Poorly-defined processes for eliciting, analyzing, specifying and validating requirements can lead to unclear issues or misunderstandings on business needs and project’s scope. These typically result in customers’ non-satisfaction with either the products’ quality or the increase of the project’s budget and duration. Maturity models allow an organization to measure the quality of its processes and improve them according to an evolutionary path based on levels. The Capability Maturity Model Integration (CMMI) addresses the aforementioned Requirements Engineering issues. CMMI defines a set of best practices for process improvement that are divided into several process areas. Requirements Management and Requirements Development are the process areas concerned with Requirements Engineering maturity. Altran Portugal is a consulting company concerned with the quality of its software. In 2012, the Solution Center department has developed and applied successfully a set of processes aligned with CMMI-DEV v1.3, what granted them a Level 2 maturity certification. For 2015, they defined an organizational goal of addressing CMMI-DEV maturity level 3. This MSc dissertation is part of this organization effort. In particular, it is concerned with the required process areas that address the activities of Requirements Engineering. Our main goal is to contribute for the development of Altran’s internal engineering processes to conform to the guidelines of the Requirements Development process area. Throughout this dissertation, we started with an evaluation method based on CMMI and conducted a compliance assessment of Altran’s current processes. This allowed demonstrating their alignment with the CMMI Requirements Management process area and to highlight the improvements needed to conform to the Requirements Development process area. Based on the study of alternative solutions for the gaps found, we proposed a new Requirements Management and Development process that was later validated using three different approaches. The main contribution of this dissertation is the new process developed for Altran Portugal. However, given that studies on these topics are not abundant in the literature, we also expect to contribute with useful evidences to the existing body of knowledge with a survey on CMMI and requirements engineering trends. Most importantly, we hope that the implementation of the proposed processes’ improvements will minimize the risks of mishandled requirements, increasing Altran’s performance and taking them one step further to the desired maturity level.

Novo Software para análise do epitélio nasal humano

A discinesia ciliar primária (DCP) resulta de disfunção ciliar no ser humano, estando associada a um conjunto de sintomas muito diversificados. É uma doença respiratória rara caracterizada por infecções respiratórias, situs inversus, infertilidade e hidrocefalia. Em Portugal não existe nenhum centro de diagnóstico da doença. Mas a inten-ção de criar um surgiu, seguindo o método de centros de diagnóstico para DCP utilizado noutros países. Este diagnóstico consiste em recolher amostras dos cílios do nariz, através do método de escovagem nasal e obter a gravação do batimento das células ciliadas por uma câmara de alta velocidade acoplada a um microscópio com objectivas de alta resolução. É possível estudar a DCP através da análise do comportamento físico dos cílios, e, para uma melhor abordagem, foi desenvolvido um programa executável, em C#, para análise destas amostras. Este, após a escolha de uma zona de interesse da sequência de imagens pelo utilizador (ROI), detecta as frequências do bati-mento ciliar, indicando uma lista com as percentagens das frequências obtidas e cria um mapa de frequências do ROI. A ferramenta permite ainda calcular o comprimento do cílio e realizar um estudo do movimento do mesmo, algo que ainda não foi abordado por outros programas. O código desenvolvido permitirá, assim, obter um diagnóstico de DCP em Por-tugal, rápido e nalguns casos com um melhor desempenho do que a inspecção visual seguida noutros centros de diagnóstico.

Plataforma online de partilha e comparação de software para análise de imagens da retina

Nesta Tese foi desenvolvida uma plataforma online multiutilizador, que tem como objetivo principal comparar algoritmos de análise de imagens para de-terminar o seu grau de eficácia. Um exemplo de aplicação é a comparação de algoritmos de análise de imagens da retina para deteção de drusas. A compa-ração é feita considerando um dos algoritmos como referência padrão e sobre o este são avaliados os restantes. O funcionamento da plataforma é semelhante à de um fórum, onde é possível a um utilizador criar tópicos publicando imagens e seu descritivo. Após a cria-ção do tópico qualquer utilizador pode visualizar o mesmo, dando a hipótese de comentar ou de acrescentar imagens processadas com os seus próprios al-goritmos de análise. Com o aumento de imagens processadas, obtém-se uma base de dados de algoritmos de análise de imagens sobre a qual é possível avaliar o seu grau de eficácia. A plataforma pretende também criar comunidades onde os utilizadores pos-sam interagir uns com os outros comentando sobre os tópicos, contribuindo assim para o melhoramento dos algoritmos. Deste modo, além de uma base de dados que qualquer utilizador pode usar, obtém-se uma fonte de informação disponibilizada por outros profissionais da área.

SDAR: a package for plotting and analyzing stratigraphy data in R

Stratigraphic Columns (SC) are the most useful and common ways to represent the eld descriptions (e.g., grain size, thickness of rock packages, and fossil and lithological components) of rock sequences and well logs. In these representations the width of SC vary according to the grain size (i.e., the wider the strata, the coarser the rocks (Miall 1990; Tucker 2011)), and the thickness of each layer is represented at the vertical axis of the diagram. Typically these representations are drawn 'manually' using vector graphic editors (e.g., Adobe Illustrator®, CorelDRAW®, Inskape). Nowadays there are various software which automatically plot SCs, but there are not versatile open-source tools and it is very di cult to both store and analyse stratigraphic information. This document presents Stratigraphic Data Analysis in R (SDAR), an analytical package1 designed for both plotting and facilitate the analysis of Stratigraphic Data in R (R Core Team 2014). SDAR, uses simple stratigraphic data and takes advantage of the exible plotting tools available in R to produce detailed SCs. The main bene ts of SDAR are: (i) used to generate accurate and complete SC plot including multiple features (e.g., sedimentary structures, samples, fossil content, color, structural data, contacts between beds), (ii) developed in a free software environment for statistical computing and graphics, (iii) run on a wide variety of platforms (i.e., UNIX, Windows, and MacOS), (iv) both plotting and analysing functions can be executed directly on R's command-line interface (CLI), consequently this feature enables users to integrate SDAR's functions with several others add-on packages available for R from The Comprehensive R Archive Network (CRAN).