Uranium distribution and radon exhalation from Brazilian dimension stones

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Some possible evolutionary scenarios suggested by Cl-36 measurements in Guarani aquifer groundwaters

The Guarani aquifer underlies 1.2 M km(2) in the Parana sedimentary basin of South America and is an important source of water for industry, agriculture, and domestic supplies. To determine the sustainability of this aquifer we need to understand the dynamics of the groundwater system. This paper describes the first Cl-36 measurements on aquifer groundwaters and some measurements on South American rainwaters, thought to be indicative of the recharge water. The results are compared to previous work in the region, including other radioisotope analyses. A simple model is developed, incorporating radioactive decay, allowing scenarios to be developed for mixing different waters at different mixing rates. Thus, mixing scenarios consistent with other hydrogeological and hydrogeochemical data could be assessed. A model that mixes fresh recharging waters with formational waters, that contain elevated chloride levels, but low (in situ) Cl-36 levels, can explain most of the results presented here. The expectation that rainwater samples would provide a good end-member for modelling recharge proved problematic, however. As a consequence, it is suggested that either: the recharge waters are not sourced from the same locations as the rains; that the current rainfall and fallout conditions were significantly different in the past; or that the low levels of chloride in rainfall may have allowed some contamination of the samples by old (Cl-36-free) chloride during the recharge process. (c) 2008 Elsevier Ltd. All rights reserved.

Radionuclide concentrations in raw and purified phosphoric acids from Brazil and their processing wastes: implications for radiation exposures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Direct Determination of Phosphite in Fertilizers by Amperometric Titration

Amperometric titration using two Pt microelectrodes for the determination of phosphite in fertilizers based on the oxidation of analyte by iodine is proposed. The influence of pH, buffer composition, temperature, and foreign species on the end point and titration time was investigated. For titrations carried out at 70 degrees C using the pH 6.8 phosphate buffer, samples containing ca. 0.4% (m/v) P(2)O(5) could be titrated with 0.050 mol L(-1) iodine titrant, and the end point determined by extrapolating the linear portions of the plot to their intersection coincided with the end point identified by spectrophotometry. Accuracy was checked for phosphite determination in five fertilizer samples. Results were in agreement at the 95% confidence level (paired t test) with spectrophotometry. Recoveries of phosphite added to fertilizer samples ranged from 97% to 102% regardless of the amount of spiking in several determinations. The relative standard deviation (n = 10) was 1.0% for a diluted sample containing 0.050 mol L(-1) Na(2)HPO(3).

Método titrimétrico para determinar fosfito em amostras agroindustriais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Standartization of broth microdilution method for Mycobacterium tuberculosis

Indirect drug susceptibility tests of Mycobacterium tuberculosis was done to investigate the accuracy and feasibility of a broth microdilution method (BMM) for determining minimal inhibitory concentrations of conventional drugs against M. tuberculosis. Test drugs included isoniazid (H), rifampicin (R), ethambutol (E), streptomycin (S) and pyrazinamide (Z). Fifty isolates of M. tuberculosis from patients who had never received drug therapy, and H37Rv strain for control, were evaluated in the system. When comparing this method with the gold standard proportional method in Lowenstein-Jensen medium, sensitivity of 100% for all drugs and specifities of 91, 100, 96, 98 and 85% were observed respectively for H, R, E, S and Z. The BMM was read faster (14-20 days) than the proportional method (20-28 days). The microdilution method evaluated allows the testing of multiple drugs in multiple concentrations. It is easy to perform and does not require special equipment or expensive supplies. In contrast to radiometric method it does not use radioactive material.

Genética molecular do hipotireoidismo congênito

O hipotireoidismo congênito (HC) ocorre, mundialmente, em 1/3000-4000 neonatos e pode ser classificado em permanente ou transitório. O HC primário é responsável pela maioria dos afetados, enquanto o secundário e terciário são raros. Nos países iodo-suficientes, a disgenesia tireóidea (DT) é a causa mais freqüente de HC. Os defeitos hereditários da síntese hormonal ocorrem em minoria de crianças portadoras de HC. Fatores ambientais, genéticos e auto-imunes concorrem na etiologia do HC, mas na maioria dos casos de DT a causa é obscura. Atribui-se aos genes envolvidos na ontogenia da glândula tireóidea, como os fatores de transcrição TITF1, TITF2, PAX-8 e receptor de TSH (TSHR), função patogenética na DT. Até o momento não foi descrita anormalidade no gene TITF1 como causa de HC, enquanto foram identificadas mutações no PAX-8 em cinco recém-nascidos com DT. Embora não envolvidas na DT, mutações inativadoras do TSHR podem produzir espectro de defeitos congênitos oscilando entre hipertirotropinemia com eutireoidismo e hipotireoidismo com hipoplasia glandular. A clonagem dos genes envolvidos na biossíntese dos hormônios tireóideos, como o da tireoperoxidase (TPO) e tireoglobulina (Tg), permitiu a identificação de mutações responsáveis por alguns casos de bócio e hipotireoidismo decorrente de defeito de incorporação de iodeto ou anormalidades na síntese de Tg. Recentemente, foi demonstrada a base molecular do defeito de transporte ativo de iodeto e da síndrome de Pendred, respectivamente, devidas a mutações no gene NIS (simportador de sódio e iodeto) e no gene PDS (pendrina). em conclusão, grande parte dos pacientes com HC e DT não tem esclarecida, ainda, a causa molecular desta síndrome.

Efeitos da pentoxifilina sobre a viabilidade in vitro dos espermatozóides de eqüinos, após o resfriamento a 5ºC

O objetivo deste trabalho foi avaliar, in vitro, o efeito da adição de 1 mg pentoxifilina por mL de amostras seminais diluídas em meio Kenney, e resfriadas a 5º C, de garanhões normospérmicos, sobre os seguintes parâmetros: taxas de motilidade total e motilidade progressiva, velocidade espermática ao longo da trajetória real, índice retilíneo, taxa de linearidade, velocidade progressiva, taxa de viabilidade e taxa de integridade da membrana plasmática. Foram avaliados 20 ejaculados de quatro garanhões, com o auxílio do Hamilton Thorn Research (Animal Version 12.0 L, EUA), em câmara de Makler. A taxa de viabilidade foi realizada por coloração de eosina e microscopia de contraste e a taxa de integridade de membrana, por coloração com fluorocromos, iodeto de propídio e diacetato de carboxifluoresceina e microscopia de fluorescência. As análises foram realizadas aos 30, 60, e 120 minutos de incubação a 37º C, após 12, 24 e 48 horas de resfriamento a 5ºC. A pentoxifilina incrementou significativamente, em relação ao grupo controle, os parâmetros espermáticos relacionados à motilidade dos espermatozóides e de integridade da membrana plasmática, durante todo o período de incubação, da seguinte forma: taxa de motilidade total em 8,2%; motilidade progressiva em 4,7%; velocidade real em 23,1 mm/s; taxa de espermatozóides com velocidade rápida em 7,4%; taxa de viabilidade em 4,7%; e integridade da membrana plasmática em 3,5 % do tratado. Quanto aos parâmetros índice de retilinidade e linearidade, não foi observada diferença significativa entre os grupos. Os resultados obtidos nas condições deste experimento indicam que a adição de pentoxifilina ao ejaculado resfriado de garanhões, até 48 horas após o resfriamento, pode ser benéfica à qualidade dos espermatozóides para uso na inseminação artificial.

Caracterização do óleo das sementes de Pachira aquatica Aublet para aproveitamento alimentar

Os frutos de Pachira aquatica Aublet apresentam sementes comestíveis com características organolépticas muito apreciadas pelas populações amazônicas, sendo pouco utilizados em outras regiões. Este trabalho teve como objetivo caracterizar as sementes quanto à composição centesimal e determinar as características físico-químicas e perfil de ácidos graxos. A determinação da composição centesimal das sementes (teores de umidade, lipídios, proteínas, cinzas e carboidratos) e análises do óleo extraído das mesmas (ácidos graxos livres, índices de peróxido, iodo, refração, saponificação, ponto de fusão e perfil de ácidos graxos) foram realizadas seguindo metodologia oficial. O teor de óleo nas sementes 38,39% demonstrou que estas têm potencial para aproveitamento industrial. Das características físico-químicas analisadas, o óleo extraído das sementes apresentou 39,2% de ácidos graxos livres (expresso em % ácido oleico), índice de iodo de 27,4 g I2.100 g-1, índice de saponificação de 208,0 mg.KOH g-1, índice de refração (40 °C) de 1,4569 e ponto de fusão de 41,9 °C. Quanto à composição de ácidos graxos do óleo predominaram os ácidos palmítico (44,93%), oleico (39,27%) e linoleico (11,35%). Tal fato favorece o uso deste óleo como matéria-prima para as indústrias alimentícia, farmacêutica e de cosméticos.

THE USE OF AMPPD AS AN ALTERNATIVE SUBSTRATE FOR AP-MEDIATED DETECTION OF NONRADIOLABELED DNA PROBES IN EUCALYPTUS-SALIGNA

We present a non-radioactive alternative to Southern's (J. Mol. Biol. 98: 503-517, 1975) DNA-DNA hybridization technique. The use of AMPPD - Disodium 3-(4-Methoxyspiro {1,2-dioxetane-3,2'tricyclo[3.3.1.1(3,7)]decan}-4-yl)phyenyl phosphate as an alternative substrate for AP-mediated detection of digoxigenin-11 dUTP-labeled probes made possible the simple and nonhazardous reuse of blots. We used 0.8 % agarose gels containing 30 mug per lane of Eucalyptus saligna DNA, digested with Eco RI, electrophoresed and blotted on to nylon membranes (Hybond-N, Amersham, UK), using the Southern blotting procedure, and UV irradiated for one minute for DNA fixation. The hybridizations were carried out overnight with digoxigenin labeled random inserts of E. saligna DNA by using the Genius Kit (Boehringer Mannheim). Detection of the DNA-DNA hybrids was performed in the presence of 0.5% blocking agent and the substrates NBT/BCIP were replaced by 0.26 mM AMPPD in the final alkaline assay buffer (50 mul/cm2). After membrane incubation for five minutes at room temperature in a sealed plastic bag, the AMPPD solution was retrieved and stored at 4-degrees-C for reuse. A Kodak X-BRAF QA-S film was pressed firmly onto the bag containing the wet membrane, exposed for two to six hours and then developed. After use, the probes were stripped off and the blots reutilized, three times so far, with the same results.

In vitro susceptibility testing of Microsporum gypseum isolated from healthy cattle and soil samples against itraconazole, terbinafine, fluconazole and topical veterinarian drugs

The present study evaluated in vitro susceptibility testing of dermatophytes isolates from healthy cattle and soil samples against three antifungal agents and three topical veterinarian drugs. Itraconazole and terbinafine showed a higher in vitro fungicidal activity than fluconazole. The veterinarian drugs LEPECID (R) and iodine 5% were more active in vitro than the UNGUENTO (R) spray. All drugs showed fungicidal activity against Microsporum gypseum, and they may be considered as efficient agents for the topical treatment of dermatophytoses in cattle.

Er3+ as marker for order-disorder determination in the PbTiO3 system

Er3+ ions were added to the PbTiO3 network using the polymeric precursor method to characterize the order-disorder transformation found in this material by means of experimental and theoretical approach. The disordered and ordered material structures were studied by photoluminescence measurements, X-ray diffraction (XRD) and U-V-visible spectroscopy. The Er3+ ions served as a marker to identify the structural short-range order beginning in the PbTiO3 matrix. From photoluminescence results it was concluded that disordered PbTiO3 powders have a certain short range order in the network that are undetected by XRD measurements. The electronic structures were calculated by the ab initio periodic method in DFT level with the non-local B3LYP hybrid approximation for the Ti atom site interpretation using density of states (DOS) results. This analysis enabled understanding that Ti atom sphere coordination can create possible states for radioactive return and trap of electron-holes pair. (c) 2007 Elsevier B.V. All rights reserved.

Sulfation of intrinsic glycoproteins of the rabbit vitreous

The experiments reported here were designed to characterize the intrinsic vitreous glycoproteins and to understand the process of their sulfation. Rabbits were injected intravitreally with S-35-sodium sulfate and killed at several time intervals after injection. In another series of experiments, rabbits were injected either with S-35-sodium sulfate, H-3-fucose or H-3-tyrosine, associated or not associated with tunicamycin administration. Vitreous from the control eyes was also digested with N-glycosidase.. Furthermore, ciliary bodies, the putative source of the intrinsic vitreous glycoproteins, were incubated with S-35-sodium sulfate in the presence or absence of the protein synthesis inhibitor cycloheximide, and the culture media recovered for analysis. These and the vitreous samples of the other experiments were processed for sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and fluorography. Except for serum albumin, practically all polypeptide bands of the vitreous and culture media were labeled with radioactive sulfate and were shown to undergo renewal. The experiments using tunicamycin or enzyme treatment suggest that radioactive sulfate was incorporated not only into the carbohydrate side chains of the glycoproteins but also into the amino acid tyrosine of the polypeptide backbone of these glycoproteins. (C) 1998 Academic Press.

Effect of sodium hypochlorite and five intracanal medications on Candida albicans in root canals

The aim of this study was to evaluate the effect of 1% sodium hypochlorite and five intracanals medications on Candida albicans harvested inside root canals. The contaminated canals were irrigated with sterile saline solution and then treated as follows: (i) filled with Calen paste (calcium hydroxide/glycol polyethylene paste); (ii) filled with camphorated paramonochloro phenol (CPMC); (iii) filled with 2% iodine-iodate solution; (iv) filled with tricresol formalin; (v) filled with Calen and CPMC pastes; (vi) irrigation with 1% sodium hypochlorite and filled with no intracanal medication; and (vii) no intracanal medication was used. Canal access and the apical foramen were then sealed with Cavit and the roots were stored in a humid chamber at 37 +/- 1 degreesC for 14 days. The canals were reinstrumented and irrigated with sterile saline solution. Sterile paper points were used to transfer the root canal contents to test tubes containing sterile saline solution. Part of the suspension was harvested in Sabouraud dextrose agar with chloramphenicol and incubated at 37 +/- 1 degreesC for 48 h, CPMC was effective in 100% of the samples followed in decreasing order of effectiveness by calcium hydroxide with CPMC (70% effective), 1% sodium hypochlorite (70% effective) (p < 0.05), tricresol formalin (60% effective), 2% iodine-iodate solution (50% effective), calcium hydroxide paste (30% effective), and saline + no intracanal medication.

Determination of iodide and idoxuridine at a glutaraldehyde-cross-linked poly-L-lysine modified glassy carbon electrode

The detection limit (about 0.017 mu g mL(-1)) for voltammetric determination of iodide (peak at +0.87 V vs. Ag/AgCl at pH 2) at a glutaraldehyde-cross-linked poly-L-lysine modified glassy carbon electrode involving oxidation to iodine was found to be several orders of magnitude lower than that for the voltammetric determination on a bare glassy carbon electrode. This method was applied successfully to the determination of iodide in two medicinal formulations. Idoxuridine was determined indirectly at the same electrode by accumulating it first at -0.8 V vs. Ag/AgCl. At this potential the C-I bond in the adsorbed idoxuridine is reduced giving iodide, which is then determined at the modified electrode. The method was successfully applied to the determination of idoxuridine in a urine sample.