Variability of the high-velocity outflow in the quasar PDS 456

We present a comparison of two Suzaku X-ray observations of the nearby (z = 0.184), luminous (L ∼ 10 erg s) type I quasar, PDS 456. A new 125 ks Suzaku observation in 2011 caught the quasar during a period of low X-ray flux and with a hard X-ray spectrum, in contrast with a previous 190 ks Suzaku observation in 2007 when the quasar appeared brighter and had a steep (Γ > 2) X-ray spectrum. The 2011 X-ray spectrum contains a pronounced trough near 9 keV in the quasar rest frame, which can be modeled with blueshifted iron K-shell absorption, most likely from the He- and H-like transitions of iron. The absorption trough is observed at a similar rest-frame energy as in the earlier 2007 observation, which appears to confirm the existence of a persistent high-velocity wind in PDS 456, at an outflow velocity of 0.25-0.30c. The spectral variability between 2007 and 2011 can be accounted for by variations in a partial covering absorber, increasing in covering fraction from the brighter 2007 observation to the hard and faint 2011 observation. Overall, the low-flux 2011 observation can be explained if PDS 456 is observed at relatively low inclination angles through a Compton-thick wind, originating from the accretion disk, which significantly attenuates the X-ray flux from the quasar. © 2014. The American Astronomical Society. All rights reserved.

Design Method for Circularly Polarized Fabry-Perot Cavity Antennas

A new class of circularly polarized (CP) Fabry-Perot cavity antennas is introduced that maintain the simplicity of a linearly polarized primary feed and a single cavity structure. The proposed antennas employ a double-sided partially reflective surface (PRS), which allows independent control of the magnitude and phase responses for the reflection and transmission coefficients. In conjunction with an anisotropic high-impedance surface (HIS) ground plane, this arrangement allows for the first time a single cavity antenna to produce a specified gain in CP from a linearly polarized primary source. A design procedure for this class of antennas is introduced. The method exploits a simple ray optics model to calculate the magnitude and phase of the electric field in the cavity upon plane wave excitation. Based on this model, analytical expressions are derived, which enforce the resonance condition for both polarizations at a predetermined PRS reflectivity (and hence predetermined antenna gain) together with a 90 degrees differential phase between them. The validity of the concept is confirmed by means of an example entailing an antenna with gain of approximately 21 dB at 15 GHz. Full-wave simulation results and experimental testing on a fabricated prototype are presented and agree well with the theoretical predictions.

Selective High Impedance Surface Active Region Loading of Archimedean Spiral Antenna

We show that a significant increase in the gain and front-to-back ratio is obtained when different high impedance surface (HIS) sections are placed below the active regions of an Archimedean spiral antenna. The principle of operation is demonstrated at 3, 6, and 9 GHz for an antenna design that employs a ground plane composed of two dissimilar HISs. The unit cells of the HISs are collocated and resonant at the same frequency as the 3- and 6-GHz active regions of the wideband spiral. It is shown that the former HIS must also be designed to resonate at 9 GHz to avoid the generation of a boresight null that occurs because the structure is physically large enough to support higher-order modes. The improvement that is obtained at each of the three frequencies investigated is shown by comparing the predicted and measured radiation patterns for the free space and HIS-backed antenna.

Near Field Enhancement and Subwavelength Imaging Using Resonantly Loaded Apertures

It is demonstrated that the electromagnetic (EM) transmission through a subwavelength or non-resonant aperture in a conductive screen can be dramatically enhanced by loading it with folded metallic strips exhibiting resonant properties. When illuminated by an EM plane wave these loaded apertures enable very tight, subwavelength, collimation of the EM power in the near field zone. We propose planar and quasi-planar resonant insertion geometries that should allow, for the first time, two-dimensional dual-polarization subwavelength field confinement along with ability to focus both electric and magnetic fields. The proposed technique for resonance transmission enhancement and near field confinement forms a basis for a new class of microwave near field imaging probe with subwavelength resolution capable of operating over a wide range of imaging distances (0.05–$0.25lambda$). Measurement results demonstrate the possibility of high contrast (more than 3 dB in amplitude and 40 degrees in phase) near field subwavelength imaging of 2D and 3D resonant and non-resonant metallic and dielectric targets in free space and in moderately lossy layered media.

Ornithokinin (avian bradykinin) from the skin of the Chinese bamboo odorous frog, Odorrana versabilis

One of the most widespread and abundant families of pharmacologically active peptides in amphibian defensive skin secretions is the bradykinins and related peptides. Despite retaining certain primary structural attributes that assign them to this peptide family, bradykinins and related peptides are unique among amphibian skin peptides in that they exhibit a wide range of primary structural variations, post-translational modifications and/or N-terminal or C-terminal extensions. Initially it was believed that their high degree of primary structural heterogeneity was reflective of random gene mutations within species, but latterly, there is an increasing body of evidence that the spectrum of structural modifications found within this peptide family is reflective of the vertebrate predator spectrum of individual species. Here we report the discovery of ornithokinin (avian bradykinin – Thr6, Leu8-bradykinin) in the skin secretion of the Chinese bamboo odorous frog, Odorrana versabilis. Molecular cloning of its biosynthetic precursor-encoding cDNA from a skin secretion-derived cDNA library revealed a deduced open-reading frame of 86 amino acid residues, encoding a single copy of ornithokinin towards its C-terminus. The domain architecture of this ornithokinin precursor protein was consistent with that of a typical amphibian skin peptide and quite different to that of the ornithokininogen from chicken plasma. Ornithokinin was reported to induce hypotension in the chicken and to contract the chicken oviduct but to have no obvious effect on the rat uterus. However, in this study, synthetic ornithokinin was found to contract the rat ileum (EC50 = 539 nM) and to increase contraction frequency in the rat uterus (EC50 = 1.87 μM).

Dichloridobis(picolinohydrazide)cadmium(II)

The title compound, [CdCl2(C6H7N3O)(2)], was obtained unintentionally as a product of an attempted reaction of CdCl2 center dot 2.5H(2)O and picolinic acid hydrazide, in order to obtain a cadmium(II) complex analogous to a 15-metallacrown-5 complex of the formula [MCu5L5]X-n, with M = a central metal ion, L = picolinic acid hydrazide and X = Cl- , but with cadmium the only metal present. The coordination geometry around the Cd-II atom can be considered as distorted octahedral, with two bidentate picolinic acid hydrazide ligands, each coordinating through their carbonyl O atom and amino N atom, and two chloride anions. In the crystal structure, intermolecular N-H center dot center dot center dot Cl and N-H center dot center dot center dot N hydrogen bonds link the molecules into a two-dimensional network parallel to the ( 100) plane. The pyridine rings of adjacent networks are involved in pi-pi stacking interactions, the minimum distance between the ring centroids being 3.693 (2) angstrom.

Poly[mercury(II)-di-mu-chloro-mu-pyrazine-kappa N-2 : N ']

In [HgCl2(Pyp)](n) (Pyp = pyrazine, C4H4N2), chloride-bridged HgCl4/2 strands are connected into layers by pyrazine molecules. The Hg atom is on a site of symmetry 2/m, the unique Cl atom is on a mirror plane, the unique N atom is on a twofold rotation axis, and the unique C and H atoms are in general positions.

Bis(tetraethylammonium) octabromo-trimercurate(II), (Et4N)(2)[Hg3Br8]

The structure of (Et4N)(2)[Hg3Br8] contains isolated dinuclear [Hg2Br6](2-) anions and neutral HgBr2 molecules. Charge balance is achieved by ordered [Et4N](+) cations. The formula may therefore be written as (Et4N)(2)[Hg2Br6][HgBr2]. The N atoms of the (Et4N)(+) ions lie on a (4) over bar axis along [001] and, whereas one of the mercury(II) ions is placed on a mirror plane perpendicular to the c axis, the second one is located on a special position of site symmetry 2/m.

Molecular Cloning of a Novel Tryptophyllin Peptide from the Skin of the Orange-Legged Monkey Frog, Phyllomedusa hypochondrialis

Tryptophyllins are a group of small (4–14 amino acids), heterogenous peptides, mostly from the skins of hylid frogs from the genera, Phyllomedusa and Litoria. To date, more than forty TPHs have been discovered in species from these two genera. Here, we describe the identification of a novel tryptophyllin type 3 peptide, PhT-3, from the extracts of skin of the orange-legged monkey frog, Phyllomedusa hypochondrialis, and molecular cloning of its precursor-encoding cDNA from a cDNA library constructed from the same skin sample. Full primary structural characterization was achieved using a combination of direct Edman degradation, mass spectrometry and deduction from cloned skin-derived cDNA. The open-reading frame of the precursor cDNA was found to consist of 63 amino acid residues. The mature peptide arising from this precursor contains a post-translationally modified N-terminal pyroglutamate (pGlu) residue, formed from acid-mediated cyclization of an N-terminal Gln (Q) residue, and with the structure: pGlu-Asp-Lys-Pro-Phe-Trp-Pro-Pro-Pro-Ile-Tyr-Pro-Met. Pharmacological assessment of a synthetic replicate of this peptide on phenylephrine preconstricted rat tail artery segments, revealed a reduction in relaxation induced by bradykinin. PhT-3 was also found to mediate antiproliferative effects on human prostate cancer cell lines.

Corrosion resistant fibre reinforced polymer (FRP) reinforcement for bridge deck slabs

This paper discusses the beneficial influence of compressive membrane action in fibre reinforced polymer (FRP)reinforced in-plane restrained slabs in bridge deck slabs and the improved service performance when archingaction occurs. Bridge deck slabs that are exposed to extreme environmental conditions can experience severecorrosion damage. Expansive corrosion in steel reinforcement significantly reduces the design life and durabilityof concrete structures; for example, on one short section of the M1 in Northern Ireland, nearly £1 million was spent last year on the maintenance and repair of bridges due to corrosion. Corrosion-resistant compositereinforcement such as basalt fibre reinforced polymer (BFRP) and glass fibre reinforced polymer (GFRP) provides adurable alternative to reinforcing steel. In this research, two BFRP reinforced slabs and two GFRP reinforced slabswere constructed using high-strength concrete with a target cube compressive strength of 65 N/mm2. The slabsrepresented typical full-scale dimensions of a real bridge deck slab 475 mm wide by 1425 mm long and 150 mmdeep. The service and ultimate behaviour of the slabs are discussed and the results are compared with the relevantdesign guidelines.

Dissidents with an innovation cause? Non-institutionalized actors ’ online social knowledge sharing, solution-finding tensions and technology management innovation

Purpose
– Traditionally, most studies focus on institutionalized management-driven actors to understand technology management innovation. The purpose of this paper is to argue that there is a need for research to study the nature and role of dissident non-institutionalized actors’ (i.e. outsourced web designers and rapid application software developers). The authors propose that through online social knowledge sharing, non-institutionalized actors’ solution-finding tensions enable technology management innovation.

Design/methodology/approach
– A synthesis of the literature and an analysis of the data (21 interviews) provided insights in three areas of solution-finding tensions enabling management innovation. The authors frame the analysis on the peripherally deviant work and the nature of the ways that dissident non-institutionalized actors deviate from their clients (understood as the firm) original contracted objectives.

Findings
– The findings provide insights into the productive role of solution-finding tensions in enabling opportunities for management service innovation. Furthermore, deviant practices that leverage non-institutionalized actors’ online social knowledge to fulfill customers’ requirements are not interpreted negatively, but as a positive willingness to proactively explore alternative paths.

Research limitations/implications
– The findings demonstrate the importance of dissident non-institutionalized actors in technology management innovation. However, this work is based on a single country (USA) and additional research is needed to validate and generalize the findings in other cultural and institutional settings.

Originality/value
– This paper provides new insights into the perceptions of dissident non-institutionalized actors in the practice of IT managerial decision making. The work departs from, but also extends, the previous literature, demonstrating that peripherally deviant work in solution-finding practice creates tensions, enabling management innovation between IT providers and users.

Stability of 71 degrees stripe domains in epitaxial BiFeO3 films upon repeated electrical switching

The 71 degrees stripe domain patterns of epitaxial BiFeO3 thin films are frequently being explored to achieve new functional properties, dissimilar from the BiFeO3 bulk properties. We show that in-plane switching and out-of-plane switching of these domains behave very differently. In the in-plane configuration the domains are very stable, whereas in the out-of-plane configuration the domains change their size and patterns, depending on the applied switching voltage frequency.

An accelerated method of developing DBT projects using CDIO partner institutions as parallel processors

The cycle of the academic year impacts on efforts to refine and improve major group design-build-test (DBT) projects since the time to run and evaluate projects is generally a full calendar year. By definition these major projects have a high degree of complexity since they act as the vehicle for the application of a range of technical knowledge and skills. There is also often an extensive list of desired learning outcomes which extends to include professional skills and attributes such as communication and team working. It is contended that student project definition and operation, like any other designed product, requires a number of iterations to achieve optimisation. The problem however is that if this cycle takes four or more years then by the time a project’s operational structure is fine tuned it is quite possible that the project theme is no longer relevant. The majority of the students will also inevitably experience a sub-optimal project experience over the 5 year development period. It would be much better if the ratio were flipped so that in 1 year an optimised project definition could be achieved which had sufficient longevity that it could run in the same efficient manner for 4 further years. An increased number of parallel investigators would also enable more varied and adventurous project concepts to be examined than a single institution could undertake alone in the same time frame.
This work-in-progress paper describes a parallel processing methodology for the accelerated definition of new student DBT project concepts. This methodology has been devised and implemented by a number of CDIO partner institutions in the UK & Ireland region. An agreed project theme was operated in parallel in one academic year with the objective of replacing a multi-year iterative cycle. Additionally the close collaboration and peer learning derived from the interaction between the coordinating academics facilitated the development of faculty teaching skills in line with CDIO standard 10.

Masks as methodology and the phenomenological turn: issues of interpretation

The purposes of this chapter are to argue for (i) the heuristic value of the concept of mask and masking in research which has its basis in psychodynamic theory but relating it to socio-cultural theory as means to understanding self-experience (ii) the value of creating and performing masks as one valuable methodological ‘embodied’ form in social and educational research that represent individuals’ richly textured self-other constructions and allow for the interrogation of any simplistic dichotomies associated with notions of ‘inside’ ‘outside’ categories (iii) exploring possibilities and dilemmas of interpretation within this frame

The student experience in Objective Structured Clinical Examinations (OSCEs): phenomenological analysis

Background and purpose
The dominant psychometric discourse of OSCEs may lead to unexpected problems, such as a checklist-based student performance1 which under emphasises the clinical relationship with student and standardised patient (SP). Such encounters can be dehumanising for SPs2 and have implications for what students learn about relational skills through the assessment process. In this study we explore medical students’ experiences of undertaking OSCEs using a phenomenological frame.
Methodology
Interpretative phenomenological analysis is a form of qualitative methodology which has strong resonance with existentialism and focuses on the lived experience without significant reference to external political or discursive
forces.
Six 4th year undergraduate medical students from Queen’s University Belfast were recruited in December 2013. Maximum variation sampling was used. Students were interviewed by a researcher in the week prior to the
OSCE and then again in the week following the OSCE in Jan 2014. Interviews were minimally structured in order to be open to respondents, rather than adhering to a fixed topic guide, but focussed on participants’ experiences, thoughts and feelings about taking part in OSCEs. Interviews were audio-recorded and
transcribed. Students were also asked to complete a short diary entry in the days prior to the OSCEs and another immediately following. Diary entries were written, emailed or audio-recorded at student’s preference.
Results
Transcripts are currently being analysed by interpretative phenomenological analysis. Preliminary analysis has demonstrated the significance of students’ relationships within the OSCE triad (student, SP and examiner); the effect of the immediate examination environment; realism versus roleplay; students’ perceptions of the purpose of assessment; and coping mechanisms.
Full results will be available by the time of the conference.
Conclusion and Discussion
Understanding the student experience in OSCEs is a crucial step in understanding the complex construction of relationships within the OSCE triad. The focus in OSCEs is typically on standardisation and reliability, but in exploring social interactions we may refocus attention on their inherent potential for learning and effects on both students and patients.
References
1. Hodges B. Medical education and the maintenance of incompetence. Med Teach 2006;28(8):690-6
2. Johnston JL, Lundy G, McCullough M, Gormley GJ. The view from over there: reframing the OSCE through the experience of standardised patient
raters. Med Educ 2013;47(9):899-909