Avaliação funcional e farmacológica do corpo carotídeo do rato no envelhecimento

Resumo: O corpo carotídeo gera o quimiorreflexo à hipoxia, tendo por objectivo principal a homeostase dos gases do sangue. Esta tese testou a hipótese da função destes quimiossensores não se deteriorar ao longo da idade. In vivo, em ratos anestesiados, foram estudados os efeitos da idade nas respostas cardiorespiratórias a dois tipos de estímulos diferentes: a isquemia carotídea e a manipulação farmacológica de dois neurotransmissores com efeitos opostos nos quimiorreceptores, a adenosina e a dopamina. O modelo de isquemia carotídea corresponde à oclusão bilateral da artéria carótida comum, durante períodos de 5 a 15 s, o que determina um efeito excitatório na ventilação que é abolido pela secção bilateral dos nervos do seio carotídeo. No estudo farmacológico foram analisadas as respostas cardio-respiratórias à adenosina e à dopamina exógenas na presença e na ausência de antagonistas selectivos para os receptores A2A e D2, respectivamente. In vitro, no corpo carotídeo, foi quantificado o efeito de diferentes concentrações de oxigénio no conteúdo do segundo mensageiro comum à activação dos receptores A2A e D2, o cAMP. Em conjunto, estes resultados demonstraram que no rato o controlo da ventilação pelo corpo carotídeo se mantém inalterado ao longo da idade.--------------------- ABSTRACT: The carotid body initiates reflexes aimed principally at the homeostatic maintenance of blood gas tensions. This thesis tested the hypothesis of the function of these quimiossensores not deteriorate through age. In vivo, in anesthetized rats, we studied the effects of age on cardiorespiratory responses to two different types of stimuli: carotid ischemia and pharmacological manipulation of neurotransmitters with two opposite effects on chemoreceptors, adenosine and dopamine. The model of carotid ischemia corresponded to bilateral occlusion of common carotid artery, during periods of 5 to 15 s, which determines an excitatory effect on ventilation that is abolished by bilateral section of carotid sinus nerve. The pharmacological study analyzed the cardiorespiratory responses to exogenous adenosine and dopamine in the presence and absence of selective antagonists for the A2A and D2 receptors, respectively. In vitro, at the carotid body, it was quantified the effect of different concentrations of oxygen in the content of the common second messenger for the activation of A2A and D2 receptors, the cAMP. Together, these results showed that in rats the control of ventilation by carotid body remains unchanged through age.

Natural antioxidants extraction and their incorporation into model pharmaceutical systems

Dissertation to obtain a Master Degree in Biotechnology

Gold nanoparticle to antibody conjugates for diagnosis applications: molecular interactions and immunoassay development

Thesis for the Master degree in Structural and Functional Biochemistry

Sarcosine oxidase composite screen-printed electrode for sarcosine determination in biological samples

XIX Meeting of the Portuguese Electrochemical Society - XVI Iberic Meeting of Electrochemistry

Oriented Tailoring of Plastic Antibodies for Prostate Specific Antigen and Application of the Imprinted Material as Ionophore in Potentiometric Detection

Prostate Specific Antigen (PSA) is the biomarker of choice for screening prostate cancer throughout the population, with PSA values above 10 ng/mL pointing out a high probability of associated cancer1. According to the most recent World Health Organization (WHO) data, prostate cancer is the commonest form of cancer in men in Europe2. Early detection of prostate cancer is thus very important and is currently made by screening PSA in men over 45 years old, combined with other alterations in serum and urine parameters. PSA is a glycoprotein with a molecular mass of approximately 32 kDa consisting of one polypeptide chain, which is produced by the secretory epithelium of human prostate. Currently, the standard methods available for PSA screening are immunoassays like Enzyme-Linked Immunoabsorbent Assay (ELISA). These methods are highly sensitive and specific for the detection of PSA, but they require expensive laboratory facilities and high qualify personal resources. Other highly sensitive and specific methods for the detection of PSA have also become available and are in its majority immunobiosensors1,3-5, relying on antibodies. Less expensive methods producing quicker responses are thus needed, which may be achieved by synthesizing artificial antibodies by means of molecular imprinting techniques. These should also be coupled to simple and low cost devices, such as those of the potentiometric kind, one approach that has been proven successful6. Potentiometric sensors offer the advantage of selectivity and portability for use in point-of-care and have been widely recognized as potential analytical tools in this field. The inherent method is simple, precise, accurate and inexpensive regarding reagent consumption and equipment involved. Thus, this work proposes a new plastic antibody for PSA, designed over the surface of graphene layers extracted from graphite. Charged monomers were used to enable an oriented tailoring of the PSA rebinding sites. Uncharged monomers were used as control. These materials were used as ionophores in conventional solid-contact graphite electrodes. The obtained results showed that the imprinted materials displayed a selective response to PSA. The electrodes with charged monomers showed a more stable and sensitive response, with an average slope of -44.2 mV/decade and a detection limit of 5.8X10-11 mol/L (2 ng/mL). The corresponding non-imprinted sensors showed smaller sensitivity, with average slopes of -24.8 mV/decade. The best sensors were successfully applied to the analysis of serum samples, with percentage recoveries of 106.5% and relatives errors of 6.5%.

McCoy cell line as a possible model containing CD4+ receptors for the study of HIV-1 replication

Several studies have recently shown the use of recombinant rabies virus as potential vector-viral vaccine for HIV-1. The sequence homology between gp 120 and rabies virus glycoprotein has been reported. The McCoy cell line has therefore been used to show CD4+ or CD4+ like receptors. Samples of HIV-1 were isolated, when plasma of HIV-1 positive patients was inoculated in the McCoy cell line. The virus infection was then studied during successive virus passages. The proteins released in the extra cellular medium were checked for protein activity, by exposure to SDS Electrophoresis and blotting to nitro-cellulose filter, then reacting with sera of HIV positive and negative patients. Successive passages were performed, and showed viral replication, membrane permeabilization, the syncytium formation, and the cellular lysis (cytopathic effect). Flow cytometry analysis shows clear evidence that CD4+ receptors are present in this cell line, which enhances the likelihood of easy isolation and replication of HIV. The results observed allow the use of this cell line as a possible model for isolating HIV, as well as for carrying out studies of the dynamics of viral infection in several situations, including exposure to drugs in pharmacological studies, and possibly studies and analyses of the immune response in vaccine therapies.

Label-free human chorionic gonadotropin detection at picogram levels using oriented antibodies bound to graphene screen-printed electrodes

Human chorionic gonadotropin (hCG) is a key diagnostic marker of pregnancy and an important biomarker for cancers in the prostate, ovaries and bladder and therefore of great importance in diagnosis. For this purpose, a new immunosensor of screen-printed electrodes (SPEs) is presented here. The device was fabricated by introducing a polyaniline (PANI) conductive layer, via in situ electropolymerization of aniline, onto a screen-printed graphene support. The PANI-coated graphene acts as the working electrode of a three terminal electrochemical sensor. The working electrode is functionalised with anti-hCG, by means of a simple process that enabled oriented antibody binding to the PANI layer. The antibody was attached to PANI following activation of the –COOH group at the Fc terminal. Functionalisation of the electrode was analysed and optimized using Electrochemical Impedance Spectroscopy (EIS). Chemical modification of the surface was characterised using Fourier transform infrared, and Raman spectroscopy with confocal microscopy. The graphene–SPE–PANI devices displayed linear responses to hCG in EIS assays from 0.001 to 50 ng mL−1 in real urine, with a detection limit of 0.286 pg mL−1. High selectivity was observed with respect to the presence of the constituent components of urine (urea, creatinine, magnesium chloride, calcium chloride, sodium dihydrogen phosphate, ammonium chloride, potassium sulphate and sodium chloride) at their normal levels, with a negligible sensor response to these chemicals. Successful detection of hCG was also achieved in spiked samples of real urine from a pregnant woman. The immunosensor developed is a promising tool for point-of-care detection of hCG, due to its excellent detection capability, simplicity of fabrication, low-cost, high sensitivity and selectivity.

Novel biosensing device for point-of-care applications with plastic antibodies grown on Au-Screen Printed Electrodes

A gold screen printed electrode (Au-SPE) was modified by merging Molecular Imprinting and Self-Assembly Monolayer techniques for fast screening cardiac biomarkers in point-of-care (POC). For this purpose, Myoglobin (Myo) was selected as target analyte and its plastic antibody imprinted over a glutaraldehyde (Glu)/cysteamine (Cys) layer on the gold-surface. The imprinting effect was produced by growing a reticulated polymer of acrylamide (AAM) and N,N′-methylenebisacrylamide (NNMBA) around the Myo template, covalently attached to the biosensing surface. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) studies were carried out in all chemical modification steps to confirm the surface changes in the Au-SPE. The analytical features of the resulting biosensor were studied by different electrochemical techniques, including EIS, square wave voltammetry (SWV) and potentiometry. The limits of detection ranged from 0.13 to 8 μg/mL. Only potentiometry assays showed limits of detection including the cut-off Myo levels. Quantitative information was also produced for Myo concentrations ≥0.2 μg/mL. The linear response of the biosensing device showed an anionic slope of ~70 mV per decade molar concentration up to 0.3 μg/mL. The interference of coexisting species was tested and good selectivity was observed. The biosensor was successfully applied to biological fluids.

Artificial antibodies for troponin T by its imprinting on the surface of multiwalled carbon nanotubes: Its use as sensory surfaces

A novel artificial antibody for troponin T (TnT) was synthesized by molecular imprint (MI) on the surface of multiwalled carbon nanotubes (MWCNT). This was done by attaching TnT to the MWCNT surface, and filling the vacant spaces by polymerizing under mild conditions acrylamide (monomer) in N,N′-methylenebisacrylamide (cross-linker) and ammonium persulphate (initiator). After removing the template, the obtained biomaterial was able to rebind TnT and discriminate it among other interfering species. Stereochemical recognition of TnT was confirmed by the non-rebinding ability displayed by non-imprinted (NI) materials, obtained by imprinting without a template. SEM and FTIR analysis confirmed the surface modification of the MWCNT. The ability of this biomaterial to rebind TnT was confirmed by including it as electroactive compound in a PVC/plasticizer mixture coating a wire of silver, gold or titanium. Anionic slopes of 50 mV decade−1 were obtained for the gold wire coated with MI-based membranes dipped in HEPES buffer of pH 7. The limit of detection was 0.16 μg mL−1. Neither the NI-MWCNT nor the MWCNT showed the ability to recognize the template. Good selectivity was observed against creatinine, sucrose, fructose, myoglobin, sodium glutamate, thiamine and urea. The sensor was tested successfully on serum samples. It is expected that this work opens new horizons on the design of new artificial antibodies for complex protein structures.

Myoglobin-biomimetic electroactive materials made by surface molecular imprinting on silica beads and their use as ionophores in polymeric membranes for potentiometric transduction

Myoglobin (Mb) is among the cardiac biomarkers playing a major role in urgent diagnosis of cardiovascular diseases. Its monitoring in point-of-care is therefore fundamental. Pursuing this goal, a novel biomimetic ionophore for the potentiometric transduction of Mb is presented. It was synthesized by surface molecular imprinting (SMI) with the purpose of developing highly efficient sensor layers for near-stereochemical recognition of Mb. The template (Mb) was imprinted on a silane surface that was covalently attached to silica beads by means of self-assembled monolayers. First the silica was modified with an external layer of aldehyde groups. Then, Mb was attached by reaction with its amine groups (on the external surface) and subsequent formation of imine bonds. The vacant places surrounding Mb were filled by polymerization of the silane monomers 3-aminopropyltrimethoxysilane (APTMS) and propyltrimethoxysilane (PTMS). Finally, the template was removed by imine cleavage after treatment with oxalic acid. The results materials were finely dispersed in plasticized PVC selective membranes and used as ionophores in potentiometric transduction. The best analytical features were found in HEPES buffer of pH 4. Under this condition, the limits of detection were of 1.3 × 10−6 mol/L for a linear response after 8.0 × 10−7 mol/L with an anionic slope of −65.9 mV/decade. The imprinting effect was tested by preparing non-imprinted (NI) particles and employing these materials as ionophores. The resulting membranes showed no ability to detect Mb. Good selectivity was observed towards creatinine, sacarose, fructose, galactose, sodium glutamate, and alanine. The analytical application was conducted successfully and showed accurate and precise results.

Synthesis of an antibody-like material for the detection of Albumin

6th Graduate Student Symposium on Molecular Imprinting

A novel antibody-like material for breast cancer antigen CA15-3, used to track breast cancer by potentiometric transduction

This work presents the development of a low cost sensor device for the diagnosis of breast cancer in point-of-care, made with new synthetic biomimetic materials inside plasticized poly(vinyl chloride), PVC, membranes, for subsequent potentiometric detection. This concept was applied to target a conventional biomarker in breast cancer: Breast Cancer Antigen (CA15-3). The new biomimetic material was obtained by molecularly-imprinted technology. In this, a plastic antibody was obtained by polymerizing around the biomarker that acted as an obstacle to the growth of the polymeric matrix. The imprinted polymer was specifically synthetized by electropolymerization on an FTO conductive glass, by using cyclic voltammetry, including 40 cycles within -0.2 and 1.0 V. The reaction used for the polymerization included monomer (pyrrol, 5.0×10-3 mol/L) and protein (CA15-3, 100U/mL), all prepared in phosphate buffer saline (PBS), with a pH of 7.2 and 1% of ethylene glycol. The biomarker was removed from the imprinted sites by proteolytic action of proteinase K. The biomimetic material was employed in the construction of potentiometric sensors and tested with regard to its affinity and selectivity for binding CA15-3, by checking the analytical performance of the obtained electrodes. For this purpose, the biomimetic material was dispersed in plasticized PVC membranes, including or not a lipophilic ionic additive, and applied on a solid conductive support of graphite. The analytical behaviour was evaluated in buffer and in synthetic serum, with regard to linear range, limit of detection, repeatability, and reproducibility. This antibody-like material was tested in synthetic serum, and good results were obtained. The best devices were able to detect 5 times less CA15-3 than that required in clinical use. Selectivity assays were also performed, showing that the various serum components did not interfere with this biomarker. Overall, the potentiometric-based methods showed several advantages compared to other methods reported in the literature. The analytical process was simple, providing fast responses for a reduced amount of analyte, with low cost and feasible miniaturization. It also allowed the detection of a wide range of concentrations, diminishing the required efforts in previous sample pre-treating stages.

Carnitine tailored Sensors on Surface Molecular Imprinting based on Graphene layers

III Jornadas de Electroquímica e Inovação (Electroquímica e Nanomateriais), na Universidade de Trás-os-Montes e Alto Douro, Vila Real, 16 a 17 de Setembro de 2013

Host-Tailored Sensors for Carnitine Potentiometric Measurements based on Surface Molecular Imprinting

Graduate Student Symposium on Molecular Imprinting 2013, na Queen’s University, Belfast, United Kingdom, 15 a 17 de Agosto de 2013

Teste de Inclinação em Idosos com Síncope de Causa Desconhecida: Experiência da Estimulação Farmacológica com Nitroglicerina

Está demonstrado o papel do teste de inclinação na avaliação de doentes com síncope de causa não esclarecida. Nos idosos, a prevalência de episódios sincopais aumenta, associa-se a pior prognóstico e, frequentemente, implica o recurso a múltiplos exames de diagnóstico. Objectivos: Avaliar a utilidade do teste de inclinação com recurso a nitroglicerina sub-lingual como agente provocativo em idosos com síncope de etiologia desconhecida. Métodos: Foram estudados 46 doentes consecutivos com > 65 anos (56,5% do sexo feminino; 74 ± 6 anos) por síncope de etiologia não esclarecida. Em 25 doentes(54%) não havia evidência de patologia cardíaca, tendo os restantes cardiopatia hipertensiva (14 doentes) ou isquémica (7 doentes). O protocolo incluiu massagem do seio carotídeo em decúbito a após ortostatismo passivo. O teste de inclinação foi efectuado sob monitorização contínua do electrocardiograma e tensão arterial, com inclinação a 70º durante 20 minutos. Na ausência de síncope, administrou-se 500 mcg de nitroglicerina sub-lingual com monitorização por mais 20 minutos. O teste de inclinação foi considerado positivo quando houve reprodução da sintomatologia acompanhada de bradicardia e/ou hipotensão arterial (respostas cardio-inibitória, vasodepressora ou mista). Considerou-se haver hipotensão ortostática nos casos com queda da tensão arterial sistólica > 20 mmHg ou da tensão arterial diastólica > 10 mmHg nos 3 minutos após ortostatismo; nos doentes com sintomas associados à descida gradual, paralela, da tensão arterial sistólica e diastólica durante o teste de inclinação passivo, admitiu-se um perfil do tipo disautonómico; nos doentes com descida gradual da tensão arterial após nitroglicerina, considerou-se haver resposta exagerada aos nitratos. Resultados: Ocorreu reprodução de sintomas em 34 doentes (73,9%): 19,6% no teste de inclinação passivo (resposta neurocardiogénica vasodepressora – 3 doentes, hipersensibilidade do seio carotídeo – 1 doente, hipotensão ortostática – 1 doente, perfil disautonómico – 4 doentes) e 54,3% após nitroglicerina (resposta neurocardiogénica vasodepressora – 12 doentes, mista – 5 doentes , cardio-inibitória – 2 doentes e resposta exagerada aos nitratos – 6 doentes). A síncope foi neurocardiogénica em 47,8% (teste passivo – 13,6%, pós-nitroglicerina – 86,4%). Em 16,2% dos doentes submetidos a nitroglicerina ocorreu resposta exagerada aos nitratos. Não se registaram complicações durante o exame. Conclusões: O teste de inclinação em idosos com síncope de etiologia não esclarecida: 1. contribui para o diagnóstico diferencial no estudo etiológico da síncope, 2. quando potenciado pela nitroglicerina associa-se a um aumento significativo do número de respostas positivas, e permite identificar um número considerável de doentes com resposta exagerada aos nitratos.