The innovation imperative: The relationships between team climate, innovation, and performance in research and development teams

A team’s climate for innovation has been shown to be important for innovation in management and work teams. This article investigates the relationship of team climate with project team innovation and performance in research and development organizations. It is argued that the relationship between team climate and innovation will be stronger for research teams than development teams as research teams have greater scope for creating novel and innovative ideas. A sample of 193 scientists and technologists in 20 research teams and 18 development teams were measured on their team’s climate for innovation, team performance, and six indicators of innovation. Research and development teams showed similar ratings for team climate and for measures of innovation. However, the relationships between team climate and individual and team innovation were stronger for research teams than development teams. These findings are significant for fostering innovativeness and innovation in knowledge work teams.

Performance dispersion for evidence-based classification of stationary throwers

Background There is a need for better understanding of the dispersion of classification-related variable to develop an evidence-based classification of athletes with a disability participating in stationary throwing events. Objectives The purposes of this study are (A) to describe tools designed to comprehend and represent the dispersion of the performance between successive classes, and (B) to present this dispersion for the elite male and female stationary shot-putters who participated in Beijing 2008 Paralympic Games. Study design Retrospective study Methods This study analysed a total of 479 attempts performed by 114 male and female stationary shot-putters in three F30s (F32-F34) and six F50s (F52-F58) classes during the course of eight events during Beijing 2008 Paralympic Games. Results The average differences of best performance were 1.46±0.46 m for males between F54 and F58 classes as well as 1.06±1.18 m for females between F55 and F58 classes. The results demonstrated a linear relationship between best performance and classification while revealing two male Gold Medallists in F33 and F52 classes were outliers. Conclusions This study confirms the benefits of the comparative matrices, performance continuum and dispersion plots to comprehend classification-related variables. The work presented here represents a stepping stone into biomechanical analyses of stationary throwers, particularly on the eve of the London 2012 Paralympic Games where new evidences could be gathered.

Biomechanical analyses of the performance of Paralympians: From foundation to elite level

Biomechanical analysis of sport performance provides an objective method of determining performance of a particular sporting technique. In particular, it aims to add to the understanding of the mechanisms influencing performance, characterization of athletes, and provide insights into injury predisposition. Whilst the performance in sport of able-bodied athletes is well recognised in the literature, less information and understanding is known on the complexity, constraints and demands placed on the body of an individual with a disability. This paper provides a dialogue that outlines scientific issues of performance analysis of multi-level athletes with a disability, including Paralympians. Four integrated themes are explored the first of which focuses on how biomechanics can contribute to the understanding of sport performance in athletes with a disability and how it may be used as an evidence-based tool. This latter point questions the potential for a possible cultural shift led by emergence of user-friendly instruments. The second theme briefly discusses the role of reliability of sport performance and addresses the debate of two-dimensional and three-dimensional analysis. The third theme address key biomechanical parameters and provides guidance to clinicians, and coaches on the approaches adopted using biomechanical/sport performance analysis for an athlete with a disability starting out, to the emerging and elite Paralympian. For completeness of this discourse, the final theme is based on the controversial issues on the role of assisted devices and the inclusion of Paralympians into able-bodied sport is also presented. All combined, this dialogue highlights the intricate relationship between biomechanics and training of individuals with a disability. Furthermore, it illustrates the complexity of modern training of athletes which can only lead to a better appreciation of the performances to be delivered in the London 2012 Paralympic Games

A rare view: Barbara Hatley’s new book documents a career-long study of, and passion for performance in Central Java

Javanese Performances on an Indonesian Stage: Contesting Culture, Embracing Change, is Barbara Hatley’s first book about the performing arts in Indonesia, a topic that piqued her interest while undergoing a masters program at Yale University in the late 1960s. In this sense, it is a landmark study, for Hatley has since become very well known in Indonesianist circles, especially among those with an interest in matters of culture, popular and elite. Until recently, her writings on Indonesian performing arts have only been available in the form of journal articles and book chapters...

Professional indemnity insurance, performance and pre-emptive negligence: The impact of ‘non-claims’

As part of Australian licensing requirements professional valuers are required to maintain a level of professional indemnity insurance. A core feature of any insurance cover is that the insured has an obligation to notify their insurer of both actual and potential claims. An actual claim clearly will impact upon future policies and premiums paid. Notification of a potential claim, whether or not the notification crystallises into an actual claim, also can have an impact upon the insured’s claims history and premiums. The Global Financial Crisis continues to impact upon business practices and land transactions both directly and indirectly. The Australian valuation profession is not exempt from this impact. One example of this ongoing impact is reflected in a worrying practice engaged in by some financial institutions in respect of their loan portfolios. That is, even though the mortgagor is not in default, some institutions are pre-emptively issuing notices of demand regarding potential losses. Further, in some instances such demands are based only on mass appraisal valuations without specific consideration being given to the individual lot in question. The author examines the impact of this practice for the valuation profession and seeks to provide guidance for the appropriate handling of such demands.

Disability performance in Australia

In disability arts, as in so many things, Australia has both its own cultural specificities, as well as the cultural followings that come with being a colonised country. In Australia, our colonial legacy, multiculturalism, and Asia-Pacific location have always made our relation to our own arts and culture fraught, the subject of ongoing aesthetic, cultural and political contestation. We have historically suffered from what Phillips (2006) calls a ‘cultural cringe’, in which we worry about the individuality, value and volume of our arts and culture compared to others, and this comes up again and again in commentary to this day...

Social media, audiences, and audience co-creativity in contemporary performance: Restoring balance?

Producers, technicians, performers, audiences and critics are all critical components of the performing arts ecology – critical components of an ecosystem that have to come together into some sort of productive relationship if the performing arts are to be vital, viable and successful. Different performance practices developed in different times, spaces and places do, of course, connect these players in different ways as part of their attempt to achieve their own definition of success, be it based on entertainment, educational, expression, empowerment, or something else. In some contemporary performance practices, social media platforms, applications and processes are seen to have significant potential to restore balance to the relationship between performer and audience, providing audiences with more power to participate in a performance event. In this paper, I investigate prevailing assumptions about social media’s power to democratise performance practice, or, at least, develop more co-creative performance practices in which producers, performers and audiences participate actively before, during and after the event. I focus, in particular, on the use of social media as a means of developing a participatory aesthetic in which an audience member is asked to contribute to the cast of characters, plot or progression of a performance. Although diverse – from performances streamed online, to performances that offer transmedia components the audience can use to learn more about character, context and plot online, to performances that incorporate online voting, liking or linking, to performances that unfold fully online on websites, blogs, microblogs or other social media platforms – what a lot of uses of social media in contemporary performance today share is a desire to encourage audiences to reflect on their role in making, and making meaning, of the event. In this paper I interrogate if, and if so how, this democratises or develops deeper levels of co-creativity in the relationship between producers, performers and audiences.

Four years on: Are the gazelles still running? A longitudinal study of firm performance after a period of rapid growth

This article examines variations in performance between fast-growth – the so-called gazelle – firms. Specifically, we investigate how the level of growth affects future profitability and how this relationship is moderated by firm strategy. Hypotheses are developed regarding the moderated growth–profitability relationship and are tested using longitudinal data from a sample of 964 Danish gazelle firms. We find a positive relationship between growth and profitability among gazelle firms. This relationship is moderated, however, by market strategy; it is stronger for firms pursuing a broad market strategy rather than a niche strategy. This study contributes to the current literature by providing a more nuanced view of the growth–profitability relationship and investigating the potential for the future performance of gazelle firms.

Performance evaluation of non-thermal plasma on particulate matter, ozone and CO2 correlation for diesel exhaust emission reduction

This study is seeking to investigate the effect of non-thermal plasma technology in the abatement of particulate matter (PM) from the actual diesel exhaust. Ozone (O3) strongly promotes PM oxidation, the main product of which is carbon dioxide (CO2). PM oxidation into the less harmful product (CO2) is the main objective whiles the correlation between PM, O3 and CO2 is considered. A dielectric barrier discharge reactor has been designed with pulsed power technology to produce plasma inside the diesel exhaust. To characterise the system under varied conditions, a range of applied voltages from 11 kVPP to 21kVPP at repetition rates of 2.5, 5, 7.5 and 10 kHz, have been experimentally investigated. The results show that by increasing the applied voltage and repetition rate, higher discharge power and CO2 dissociation can be achieved. The PM removal efficiency of more than 50% has been achieved during the experiments and high concentrations of ozone on the order of a few hundreds of ppm have been observed at high discharge powers. Furthermore, O3, CO2 and PM concentrations at different plasma states have been analysed for time dependence. Based on this analysis, an inverse relationship between ozone concentration and PM removal has been found and the role of ozone in PM removal in plasma treatment of diesel exhaust has been highlighted.

Performance-Based Quality Assurance/Quality Control (QA/QC) Acceptance Procedures for In-Place Soil Testing Phase 3

One of the objectives of this study was to evaluate soil testing equipment based on its capability of measuring in-place stiffness or modulus values. As design criteria transition from empirical to mechanistic-empirical, soil test methods and equipment that measure properties such as stiffness and modulus and how they relate to Florida materials are needed. Requirements for the selected equipment are that they be portable, cost effective, reliable, a ccurate, and repeatable. A second objective is that the selected equipment measures soil properties without the use of nuclear materials.The current device used to measure soil compaction is the nuclear density gauge (NDG). Equipment evaluated in this research included lightweight deflectometers (LWD) from different manufacturers, a dynamic cone penetrometer (DCP), a GeoGauge, a Clegg impact soil tester (CIST), a Briaud compaction device (BCD), and a seismic pavement analyzer (SPA). Evaluations were conducted over ranges of measured densities and moistures.Testing (Phases I and II) was conducted in a test box and test pits. Phase III testing was conducted on materials found on five construction projects located in the Jacksonville, Florida, area. Phase I analyses determined that the GeoGauge had the lowest overall coefficient of variance (COV). In ascending order of COV were the accelerometer-type LWD, the geophone-type LWD, the DCP, the BCD, and the SPA which had the highest overall COV. As a result, the BCD and the SPA were excluded from Phase II testing.In Phase II, measurements obtained from the selected equipment were compared to the modulus values obtained by the static plate load test (PLT), the resilient modulus (MR) from laboratory testing, and the NDG measurements. To minimize soil and moisture content variability, the single spot testing sequence was developed. At each location, test results obtained from the portable equipment under evaluation were compared to the values from adjacent NDG, PLT, and laboratory MR measurements. Correlations were developed through statistical analysis. Target values were developed for various soils for verification on similar soils that were field tested in Phase III. The single spot testing sequence also was employed in Phase III, field testing performed on A-3 and A-2-4 embankments, limerock-stabilized subgrade, limerock base, and graded aggregate base found on Florida Department of Transportation construction projects. The Phase II and Phase III results provided potential trend information for future research—specifically, data collection for in-depth statistical analysis for correlations with the laboratory MR for specific soil types under specific moisture conditions. With the collection of enough data, stronger relationships could be expected between measurements from the portable equipment and the MR values. Based on the statistical analyses and the experience gained from extensive use of the equipment, the combination of the DCP and the LWD was selected for in-place soil testing for compaction control acceptance. Test methods and developmental specifications were written for the DCP and the LWD. The developmental specifications include target values for the compaction control of embankment, subgrade, and base materials.

The impact of simulated astigmatism on functional measures of visual performance

Uncorrected refractive error, including astigmatism, is a leading cause of reversible visual impairment. While the ability to perform vision-related daily activities is reduced when people are not optimally corrected, only limited research has investigated the impact of uncorrected astigmatism. Given the capacity to perform vision-related daily activities involves integration of a range of visual and cognitive cues, this research examined the impact of simulated astigmatism on visual tasks that also involved cognitive input. The research also examined whether the higher levels of complexity inherent in Chinese characters makes them more susceptible to the effects of astigmatism. The effects of different powers of astigmatism, as well as astigmatism at different axes were investigated in order to determine the minimum level of astigmatism that resulted in a decrement in visual performance.

Bricolage and early stage firm performance

Bricolage is one way firms innovate in the midst of resource constraints. In this thesis bricolage in entrepreneurial firms is investigated as is its impact on firm performance. The research provides empirical tests of bricolage and firm performance and tests environmental dynamism and team compositions as moderating effects that impact the bricolage-performance relationship. The limits of bricolage during firm creation are also explored. This research offers several novel theoretical contributions and some suggestions for entrepreneurs who typically use bricolage in attempts of firm creation.

Investigating the impact of project definition clarity on project performance: Structural equation modeling study

Having a clear project definition is crucial for successful construction projects. It affects design quality, project communication between stakeholders and final project performance in terms of cost, schedule and quality. This study examines the relationship between project definition and final project performance through a structural equation model comprising 4 latent constructs and 6 path hypotheses using data from a questionnaire survey of 120 general contractors in the Malaysian construction industry. The results show that in the study population, all three items impact the project performance, but the link between design quality and project performance is indirect. Instead, the clarity of project definition affects project performance indirectly through design quality and project communication and design quality affects project performance indirectly through project communication. The primary contribution is to provide quantitative confirmation of the more general statements made in the literature from around the world and therefore adds to and consolidates existing knowledge. Practical implications derived from the finding are also proposed for various project stakeholders. Furthermore, as lack of the clarity of project definition is a very common occurrence in construction projects globally, these findings have important ramifications for all construction projects in expanding and clarifying existing knowledge on what is needed for the successful delivery of construction projects.

Field performance of in-service cast iron water reticulation pipe buried in reactive clay

Field monitoring is an important means for understanding soil behaviour and its interaction with buried structures such as pipeline. This paper details the successful instrumentation of a section of an in-service cast iron water main buried in an area of reactive clay where frequent water pipe breakage has been observed. The instrumentation included measurement of pipe strain; pipe water pressure and temperature; soil pressure, temperature, moisture content and matric suction, as well as the meteorological conditions on site. The data generally indicated that changes in soil temperature, suction and moisture content were directly related to the local climatic variations. The suction and moisture content data indicated that the soil profile at the site down to around 700 mm, and probably down to 1000 mm, is affected by changes in surface weather, while soil conditions below this depth appear to be more stable. Analysis of pipe strain indicated that the pipe behaves like a cantilever beam, with the top experiencing predominantly tensile strains during summer. Subsequently, these trends reduce to compressive strains as soil swelling occurs due to increase of moisture content with the onset of winter.

Rallying the troops or beating the horses? How project-related demands can lead to either high performance or abusive supervision

In today's high-pressure work environment, project managers are often forced to “do more with less.” We argue that this imperative can lead project managers to engage in either high-performance or abusive supervision behaviors. To understand this process, we develop a model and associated propositions linking a project manager's cognitive appraisal of project-related demands to high-performance work practices versus abusive supervision behaviors—both of which impact three project outcomes: stakeholder relationships, people-related project success factors, and employee well-being. We propose that the choice between high-performance work practices and abusive supervision behaviors is moderated by a project manager's personal resources (psychological capital, emotional intelligence, and dark triad personality).