Paperinvalmistuslinjan energiankulutuksen mittaaminen paperitehtaassa

Tämän diplomityön tarkoituksena on selvittää paperinvalmistuslinjan energiankulutusmittaus paperitehtaalla ja kehittää sen perusteella mittausmenetelmä. Tavoitteena on tutkia ja ohjeistaa mittaustapahtuma, kun apuna käytetään prosessimittauksia. Diplomityön teoriaosassa käsitellään paperinvalmistuslinjaa ja sen osaprosesseja sekä paperitehtaan prosessiohjausjärjestelmiä. Lisäksi työssä kerrotaan kirjallisuudesta löytyvistä paperitehtaan energiankulutusmittauksista, taseiden soveltamisesta paperinvalmistuslinjaan, osaprosessien energiankulutuskohteista ja energiakäytön arvioinnista. Näiden tietojen perusteella kehitetään mittausmenetelmä, joka soveltuu normaalituotannossa oleviin LWC-, SC-, sanomalehti-, kartonki- ja hienopaperinvalmistuslinjoihin sekä näiden osaprosesseille. Kehitettyä mittausmenetelmää testattiin case-tapauksiin ja kokemuksia kirjattiin ylös. Mittausmenetelmän suurin rajoite on prosessin paperitehdaskohtaisuus. Menetelmästä rajataan pois ilmanvaihto-, lämminvesi- ja jäähdytysvesijärjestelmien energiavirrat, koska näistä ei yleensä ole riittävästi mittauksia. LTO:ssa poistoilmasta talteen otettu energiavirta kuitenkin otetaan huomioon. Se vähentää korvausilman lämmittämiseen tarvittavaa energiaa. Diplomityössä selvisi, että paperivalmistuslinjan energiankulutusmittaus voidaan tehdä kustannustehokkaasti ja kattavasti hyödyntäen olemassa olevia prosessimittauksia. Mittaustuloksista on mahdollista laskea ominaisenergiankulutus, jota voidaan verrata toisiin linjoihin kun mittauksissa otetaan huomioon prosessin parametrit, mittalaitteiden mittausalue, ajankohta, mittapisteiden määrä ja sijainti.

Hydrodynamics and Heat Transfer in an Airlift Reactor

Työn teoriaosassa esitetään kirjallisuudessa esiintyviä teoreettisia ja kokeellisia yhtälöitä nesteen nopeuden, kaasun tilavuusosuuden, painehäviön ja lämmönsiirron laskemiseksi. Lisäksi käsitellään airlift-reaktoreiden toimintaa, rakennetta ja teollisia sovelluksia, sekä sekoitusta ja geometrian vaikutusta airlift-reaktoreiden hydrodynaamisiin ominaisuuksiin. Kokeellisessa osassa kuvataan käytetty koelaitteisto ja mittausmenetelmät sekä esitetään saadut koetulokset. Koelaitteisto on viidellä nousuputkella varustettu ulkoisen kierron airlift-reaktori. Kokeellisessa osassa pyritään ratkaisemaan tällaisessa reaktorissa mahdollisesti esiintyviä ongelmia, kuten "slug flown" muodostuminen nousuputkissa sekä fluidien epätasainen jakautuminen nousuputkiin. Lisäksi tutkitaan erilaisten muuttujien, kuten kaasun tilavuusvirran, nesteen viskositeetin, suutinkoon ja nesteen jakoputken rakenteen, vaikutusta kaasun tilavuusosuuteen ja nesteen nopeuteen nousuputkissa. Nesteen nopeudet mitataan merkkiainemenetelmällä ja kaasun tilavuusosuudet manometrimenetelmällä. Lämmönsiirtoa tutkitaan mittaamalla lämpötilaeroja nousuputkissa NiCr-Ni –termoelementeillä. Mittaustulosten perusteella muokataan korrelaatiot kaasun tilavuusosuudelle ja nesteen tyhjäputkinopeudelle. Korrelaatioista lasketut tulokset sopivat kohtuullisen hyvin yhteen mitattujen tulosten kanssa. "Slug flown" ei todettu muodostuvan ongelmaksi 2.5 mPa s pienemmillä viskositeetin arvoilla 2 metriä pitkissä ja 19 mm halkaisijaltaan olevissa putkissa. Lisäksi todettiin, että kaasu- ja nestefaasien jakautumisongelmat voidaan ratkaista rakenteellisesti.

No Major Differences Found between the Effects of Microwave-Based and Conventional Heat Treatment Methods on Two Different Liquid Foods

Extension of shelf life and preservation of products are both very important for the food industry. However, just as with other processes, speed and higher manufacturing performance are also beneficial. Although microwave heating is utilized in a number of industrial processes, there are many unanswered questions about its effects on foods. Here we analyze whether the effects of microwave heating with continuous flow are equivalent to those of traditional heat transfer methods. In our study, the effects of heating of liquid foods by conventional and continuous flow microwave heating were studied. Among other properties, we compared the stability of the liquid foods between the two heat treatments. Our goal was to determine whether the continuous flow microwave heating and the conventional heating methods have the same effects on the liquid foods, and, therefore, whether microwave heat treatment can effectively replace conventional heat treatments. We have compared the colour, separation phenomena of the samples treated by different methods. For milk, we also monitored the total viable cell count, for orange juice, vitamin C contents in addition to the taste of the product by sensory analysis. The majority of the results indicate that the circulating coil microwave method used here is equivalent to the conventional heating method based on thermal conduction and convection. However, some results in the analysis of the milk samples show clear differences between heat transfer methods. According to our results, the colour parameters (lightness, red-green and blue-yellow values) of the microwave treated samples differed not only from the untreated control, but also from the traditional heat treated samples. The differences are visually undetectable, however, they become evident through analytical measurement with spectrophotometer. This finding suggests that besides thermal effects, microwave-based food treatment can alter product properties in other ways as well.

Consensus recommendations on training and competing in the heat.

Exercising in the heat induces thermoregulatory and other physiological strain that can lead to impairments in endurance exercise capacity. The purpose of this consensus statement is to provide up-to-date recommendations to optimise performance during sporting activities undertaken in hot ambient conditions. The most important intervention one can adopt to reduce physiological strain and optimise performance is to heat acclimatise. Heat acclimatisation should comprise repeated exercise-heat exposures over 1-2 weeks. In addition, athletes should initiate competition and training in a euhydrated state and minimise dehydration during exercise. Following the development of commercial cooling systems (eg, cooling-vest), athletes can implement cooling strategies to facilitate heat loss or increase heat storage capacity before training or competing in the heat. Moreover, event organisers should plan for large shaded areas, along with cooling and rehydration facilities, and schedule events in accordance with minimising the health risks of athletes, especially in mass participation events and during the first hot days of the year. Following the recent examples of the 2008 Olympics and the 2014 FIFA World Cup, sport governing bodies should consider allowing additional (or longer) recovery periods between and during events, for hydration and body cooling opportunities, when competitions are held in the heat.

Use of alternative and complementary therapies in labor and delivery care: a cross-sectional study of midwives" training in Catalan hospitals accredited as centers for normal birth

Background: The use of complementary and alternative medicine (CAM) and complementary and alternative therapies (CAT) during pregnancy is increasing. Scientific evidence for CAM and CAT in the field of obstetrics mainly covers pain relief in labor. Midwives are responsible for labor and delivery care: hence, their knowledge of CAM and CAT is important. The aims of this study are to describe the professional profile of midwives who provide care for natural childbirth in Catalan hospitals accredited as centers for normal birth, to assess midwives" level of training in CAT and their use of these therapies, and to identify specific resources for CAT in labor wards. Methods: A descriptive, cross-sectional, quantitative method was used to assess the level of training and use of CAT by midwives working at 28 hospitals in Catalonia, Spain, accredited as public normal birth centers. Results: Just under a third of midwives (30.4%) trained in CAT after completion of basic training. They trained in an average of 5.97 therapies (SD 3.56). The number of CAT in which the midwives were trained correlated negatively with age (r = - 0.284; p < 0.001) and with their time working at the hospital in years (r = - 0.136; p = 0.036). Midwives trained in CAT considered that the following therapies were useful or very useful for pain relief during labor and delivery: relaxation techniques (64.3%), hydrotherapy (84.8%) and the application of compresses to the perineum (75.9%). The availability of resources for providing CAT during normal birth care varied widely from center to center. Conclusions: Age may influence attitudes towards training. It is important to increase the number of midwives trained in CAM for pain relief during childbirth, in order to promote the use of CAT and ensure efficiency and safety. CAT resources at accredited hospitals providing normal childbirth care should also be standardized.

Use of alternative and complementary therapies in labor and delivery care: a cross-sectional study of midwives" training in Catalan hospitals accredited as centers for normal birth

Background: The use of complementary and alternative medicine (CAM) and complementary and alternative therapies (CAT) during pregnancy is increasing. Scientific evidence for CAM and CAT in the field of obstetrics mainly covers pain relief in labor. Midwives are responsible for labor and delivery care: hence, their knowledge of CAM and CAT is important. The aims of this study are to describe the professional profile of midwives who provide care for natural childbirth in Catalan hospitals accredited as centers for normal birth, to assess midwives" level of training in CAT and their use of these therapies, and to identify specific resources for CAT in labor wards. Methods: A descriptive, cross-sectional, quantitative method was used to assess the level of training and use of CAT by midwives working at 28 hospitals in Catalonia, Spain, accredited as public normal birth centers. Results: Just under a third of midwives (30.4%) trained in CAT after completion of basic training. They trained in an average of 5.97 therapies (SD 3.56). The number of CAT in which the midwives were trained correlated negatively with age (r = - 0.284; p < 0.001) and with their time working at the hospital in years (r = - 0.136; p = 0.036). Midwives trained in CAT considered that the following therapies were useful or very useful for pain relief during labor and delivery: relaxation techniques (64.3%), hydrotherapy (84.8%) and the application of compresses to the perineum (75.9%). The availability of resources for providing CAT during normal birth care varied widely from center to center. Conclusions: Age may influence attitudes towards training. It is important to increase the number of midwives trained in CAM for pain relief during childbirth, in order to promote the use of CAT and ensure efficiency and safety. CAT resources at accredited hospitals providing normal childbirth care should also be standardized.

False normal Lung Clearance Index in infants with cystic fibrosis due to software algorithms.

BACKGROUND: Lung clearance index (LCI), a marker of ventilation inhomogeneity, is elevated early in children with cystic fibrosis (CF). However, in infants with CF, LCI values are found to be normal, although structural lung abnormalities are often detectable. We hypothesized that this discrepancy is due to inadequate algorithms of the available software package. AIM: Our aim was to challenge the validity of these software algorithms. METHODS: We compared multiple breath washout (MBW) results of current software algorithms (automatic modus) to refined algorithms (manual modus) in 17 asymptomatic infants with CF, and 24 matched healthy term-born infants. The main difference between these two analysis methods lies in the calculation of the molar mass differences that the system uses to define the completion of the measurement. RESULTS: In infants with CF the refined manual modus revealed clearly elevated LCI above 9 in 8 out of 35 measurements (23%), all showing LCI values below 8.3 using the automatic modus (paired t-test comparing the means, P < 0.001). Healthy infants showed normal LCI values using both analysis methods (n = 47, paired t-test, P = 0.79). The most relevant reason for false normal LCI values in infants with CF using the automatic modus was the incorrect recognition of the end-of-test too early during the washout. CONCLUSION: We recommend the use of the manual modus for the analysis of MBW outcomes in infants in order to obtain more accurate results. This will allow appropriate use of infant lung function results for clinical and scientific purposes. Pediatr Pulmonol. 2015; 50:970-977. © 2015 Wiley Periodicals, Inc.

Metsähakkeen jalostusarvon nostaminen eri kuivausmenetelmillä

The thesis was made for Hyötypaperi Oy. To the business activity of the company belongs the recycling of materials and carry out for re-use and the manufacture of solid biofuels and solid recovered fuels. Hyötypaperi Oy delivers forest chips to its partner incineration plants by day and night though the year. The value of the forest chips is based on its percentage of dry material. It is important to dry forest chips well before its storage in piles and delivering to incineration plants. In the thesis was examed the increasing of the degree of refinement of forest chips by different drying methods. In the thesis was examined four different drying methods of the forest chips. The methods were field-, plate-, platform- and channel drying. In the channel drying was used a mechanical blower and the other drying methods were based on the weather conditions. By all drying methods were made test dryings during the summer 2007. In the thesis was examined also the economical profitableness of the field- and channel drying. The last examination in the thesis was measuring of the forest chips’s humidity by humidity measuring equipment of sawn timber during November 2007. The field drying on the surface of asphalt is the only method of drying, which is used by Hyötypaperi Oy in its own production. There do not exist earlier properly examined facts of any drying methods of forest chips, because the drying of forest chips is a new branch. By field- and platform drying achieved lower humidity of forest chips than by plate drying. The object by using the humidity measuring equipment was to be informed of the humidity of forest chips. At present the humidity will find out after 24 hours when the sample of humidity quantity has been dried in the oven. The Lappeenranta University of Technology had the humidity measuring equipment of sawn timber. The values of humidity measured by the equipment from the sample of forest chips were 2 – 9 percent lower than the real values of humidity specified by drying in oven.

Alteration and recovery of arm usage in daily activities after rotator cuff surgery.

BACKGROUND: The objective measurement of dominant/nondominant arm use proportion in daily life may provide relevant information on healthy and pathologic arm behavior. This prospective case-control study explored the potential of such measurements as indicators of upper limb functional recovery after rotator cuff surgery. METHODS: Data on dominant/nondominant arm usage were acquired with body-worn sensors for 7 hours. The postsurgical arm usage of 21 patients was collected at 3, 6, and 12 months after rotator cuff surgery in the sitting, walking, and standing postures and compared with a reference established with 41 healthy subjects. The results were calculated for the dominant and nondominant surgical side subgroups at all stages. The correlations with clinical scores were calculated. RESULTS: Healthy right-handed and left-handed dominant arm usage was 60.2% (±6.3%) and 53.4% (±6.6%), respectively. Differences in use of the dominant side were significant between the right- and left-handed subgroups for sitting (P = .014) and standing (P = .009) but not for walking (P = .328). The patient group showed a significant underuse of 10.7% (±8.9%) at 3 months after surgery (P < .001). The patients recovered normal arm usage within 12 months, regardless of surgical side. The arm underuse measurement was weakly related to function and pain scores. CONCLUSION: This study provided new information on arm recovery after rotator cuff surgery using an innovative measurement method. It highlighted that objective arm underuse measurement is a valuable indicator of upper limb postsurgical outcome that captures a complementary feature to clinical scores.

Coleção líquida adjacente ao ligamento falciforme em pacientes no pós-operatório imediato de transplante de fígado: achado ultra sonográfico normal ou anormal? Estudo prospectivo

Os transplantes de fígado estão sendo cada vez mais realizados, havendo necessidade, cada vez maior, de uma avaliação acurada das possíveis complicações. A ultra-sonografia é entendida, nesse contexto, como o método de escolha para a avaliação inicial das complicações envolvendo o transplante. Os autores relatam, neste estudo, o achado de coleção líquida adjacente ao ligamento falciforme, no pós-operatório imediato de pacientes transplantados de fígado e que não apresentavam nenhum sinal de complicação infecciosa intra-abdominal. Foi demonstrada a presença de coleção líquida em torno do ligamento falciforme em 33 (94,3%) de 35 pacientes avaliados. Dessa forma, os autores sugerem que este achado pode corresponder a aspecto normal encontrado no pós-operatório imediato de transplante de fígado.

Dopplervelocimetria colorida dos vasos orbitais: técnica de exame e anatomia vascular normal

A dopplervelocimetria colorida é uma modalidade do exame ultra-sonográfico que se expandiu rapidamente em todas as áreas da medicina, em virtude da sua riqueza de informações. A dopplervelocimetria colorida das artérias orbitais tem sido empregada no auxílio diagnóstico de doenças oftalmológicas, bem como para o estudo de doenças específicas como a pré-eclâmpsia. O objetivo deste estudo é descrever a anatomia normal da região orbital e detalhar a técnica de exame dopplervelocimétrico colorido, tendo em vista ser este um exame acessível e reprodutível. Acreditamos que surgirão novas aplicações deste método, que deverá ser inserido na prática diária do radiologista, visando à melhoria da qualidade do diagnóstico e seguimento das doenças oculares e sistêmicas.

CTP in Transient Global Amnesia: A Single-Center Experience of 30 Patients.

BACKGROUND AND PURPOSE: Medial temporal lobe abnormalities on DWI and functional imaging are occasionally observed in patients with transient global amnesia. We used CTP to study these patients during or briefly after resolution of their amnesic syndrome. MATERIALS AND METHODS: From 2002 onward, patients satisfying clinical criteria for transient global amnesia who underwent CTP were included. Patients with additional clinical features suggesting transient ischemic attack or stroke and those with an ischemic lesion on subsequent DWI were excluded. If deemed necessary by the clinician, DWI was performed within 10 days. RESULTS: Thirty patients with transient global amnesia underwent CTP at a median latency of 5.9 hours (interquartile range, 4.3-9.7 hours) after symptom onset. All findings, except for those in 1 patient, were normal, including those in the 14 patients with well-imaged hippocampi. In the patient with abnormal findings, CTP and PWI showed hypoperfusion in both lentiform nuclei extending into the insulae, with normalization on the repeat CTP 6 days later. In 10 patients, DWI was performed at a median latency of 2 days (interquartile range, 0-9 days). Of these, 2 showed punctate hippocampal lesions, often seen in transient global amnesia. In 2 patients excluded because of mildly atypical transient global amnesia and ischemic lesions on subsequent DWI, acute CTP findings were also normal. CONCLUSIONS: Patients with transient global amnesia had normal CTP findings in the acute phase with the exception of 1 patient with transient hypoperfusion in both basal ganglia. If imaging is performed for typical and atypical transient global amnesia, DWI should be the preferred method.