Interaction between Musca domestica L. and its predator Muscina stabulans (Fallén) (Diptera, Muscidae): effects of prey density and food source abundance

Interaction between Musca domestica L. and its predator Muscina stabulans (Fallén) (Diptera, Muscidae): Effects of prey density and food source abundance. The objective of this work was to evaluate the influence of prey density and food source abundance on the predatory behavior of Muscina stabulans over M. domestica. Three predator/prey proportions were evaluated (1:1, 1:3 and 1:6), using 100 third instar predator larvae against second instar prey larvae. Each proportion was maintained using three different levels of food substrate (25, 50 and 100 g). The experiments were carried out in triplicate in BOD incubators (25ºC, UR 70% ± 10% and 12 h photoperiod). The mortality of the M. domestica larvae was 100% under all conditions, except in the 1:6 predator/prey proportion, at the 50g and 100g food substrate levels, where it was 99.99% and 99.22%, respectively. There was a significant increase in the development period of M. stabulans in relation to the increase in prey density and decrease in quantity of food substrate. An increase in the proportion of individuals and a reduction in the amount of resource slowed down larval development. Muscina stabulans pupal weight was proportional to the increase in prey density and the amount of food substrate. The proportion or the density influenced the survival of M. stabulans, with no difference in relation to the amount of food source and consequently in the interaction of the factors. There was no difference between the 1:1 and 1:3 predator-prey densities, with both differing from the 1:6 density.

Development of a system for 3D high-resolution seismic reflection profiling on lakes

A high-resolution three-dimensional (3D) seismic reflection system for small-scale targets in lacustrine settings has been developed. Its main characteristics include navigation and shot-triggering software that fires the seismic source at regular distance intervals (max. error of 0.25 m) with real-time control on navigation using differential GPS (Global Positioning System). Receiver positions are accurately calculated (error < 0.20 m) with the aid of GPS antennas attached to the end of each of three 24-channel streamers. Two telescopic booms hold the streamers at a distance of 7.5 m from each other. With a receiver spacing of 2.5 m, the bin dimension is 1.25 m in inline and 3.75 m in crossline direction. To test the system, we conducted a 3D survey of about 1 km(2) in Lake Geneva, Switzerland, over a complex fault zone. A 5-m shot spacing resulted in a nominal fold of 6. A double-chamber bubble-cancelling 15/15 in(3) air gun (40-650 Hz) operated at 80 bars and 1 m depth gave a signal penetration of 300 m below water bottom and a best vertical resolution of 1.1 m. Processing followed a conventional scheme, but had to be adapted to the high sampling rates, and our unconventional navigation data needed conversion to industry standards. The high-quality data enabled us to construct maps of seismic horizons and fault surfaces in three dimensions. The system proves to be well adapted to investigate complex structures by providing non-aliased images of reflectors with dips up to 30 degrees.

Automatização de processo de negócio usando ferramentas de BPM Open Source Automatização do processo Segunda Via

Este trabalho foi realizado no âmbito dos regulamentos dos cursos de graduação para a obtenção do grau de licenciatura na universidade Jean Piaget de Cabo Verde. Nele abordamos os conceitos de Bussines Process Management (BPM), Bussines Process Automation (BPA) e Open Source, cujo seu principal objectivo é dar a conhecer o estudo e implementação de automatização de processo de negócio usando ferramentas de BPM Open Source e o seu impacto depois da implementação. No presente trabalho fez-se uma investigação sobre algumas ferramentas Open Source usadas na automatização de processos de negócio, e implementado um processo BPM no framework Activiti para automatização do processo de negócio segunda via dos números dos clientes da Unitel T+. Para a automatização do processo Segunda Via foi integrado os frameworks Activiti e o Liferay, visto que dado a realidade de uma operadora de telecomunicação existe uma plataforma de gestão dos dados dos clientes implementado no Liferay, e havia necessidade de integrar estes dois frameworks distintos. Um dos maiores desafios na integração dos dois frameworks foi a autenticação. Para dar resposta a este problema, obter maior nível de segurança e sincronizar os frameworks foi utilizado o Hook que permite uma única autenticação e balanceamento (sincronização) dos dados no Activiti e no Liferay.

Utilização de Plataformas Open Source Caso de estudo Empresas de Base Tecnológica e Instituições de Ensino Superior da Cidade da Praia

Este é o meu trabalho do fim de curso de Engenharia de Sistemas e Informática, no grau de licenciatura que tem como tema “Utilização de Plataformas Open Source” onde vou abordar a utilização de plataformas Open Sources na área de TI mas concretamente no desenvolvimento do software em geral o que engloba todas as fazes de desenvolvimento do software. De um modo geral está memória visa fazer uma pequena publicitação dos softwares Open Sources, sabendo que é muito comum encontramos grandes softwares Open Source mais pouco utilizado em relação a um outro software do mesmo tipo mas que é proprietário, como no caso de Windows e Linux. Pretende-se analisar as principais características de softwares Open Source que dificultam a sua utilização por parte dos profissionais de empresas de base tecnológica e chefe de laboratórios informático das instituições de ensino superior da Cidade da Praia, também pretende saber o porque da dominação dos softwares proprietários em países em desenvolvimento em geral.Entretanto vamos apresentar as principais melhorias que empresas de desenvolvimento de softwares Open Source devem fazer para aumentar a utilização dos seus softwares em comparação com o software proprietário.

Multi-dimensional approach to bullying

RÉSUMÉ : Le bullying est un type de comportement agressif qu'un élève (ou plusieurs) fait subir à un autre et qui se manifeste par des agressions verbales, physiques et/ou psychologiques. Les caractéristiques du bullying sont la répétitivité d'actions négatives sur le long terme et une relation de pouvoir asymétrique. Pour la victime, ce type de comportement peut avoir des conséquences graves telles qu'échec scolaire, dépression, troubles alimentaires, ou idées suicidaires. De plus, les auteurs de bullying commettent plus de comportements déviants au sein de l'école ou à l'extérieur de cette dernière. La mise en place d'actions ciblées auprès des auteurs de bullying pourrait donc non seulement prévenir une victimisation, mais aussi réduire les actes de délinquance en général. Hormis quelques études locales ou cantonales, aucune recherche nationale auprès d'adolescents n'existait dans le domaine. Ce travail propose de combler cette lacune afin d'obtenir une compréhension suffisante du phénomène qui permet de donner des pistes pour définir des mesures de prévention appropriées. Afin d'appréhender la problématique du bullying dans les écoles secondaires suisses, deux sondages de délinquance juvénile autoreportée ont été effectués. Le premier a eu lieu entre 2003 et 2005 dans le canton de Vaud auprès de plus de 4500 écoliers. Le second a été administré en 2006 dans toute la Suisse et environ 3600 jeunes y ont participé. Les jeunes ont répondu au sondage soit en classe (questionnaire papier) soit en salle d'informatique (questionnaire en ligne). Les jeunes ayant répondu avoir sérieusement harcelé un autre élève est d'environ 7% dans le canton de Vaud et de 4% dans l'échantillon national. Les analyses statistiques ont permis tout d'abord de sélectionner les variables les plus fortement liées au bullying. Les résultats montrent que les jeunes avec un bas niveau d'autocontrôle et ayant une attitude positive envers la violence sont plus susceptibles de commettre des actes de bullying. L'importance des variables environnementales a aussi été démontrée: plus le jeune est supervisé et encadré par des adultes, plus les autorités (école, voisinage) jouent leur rôle de contrôle social en faisant respecter les règles et en intervenant de manière impartiale, moins le jeune risque de commettre des actes de bullying. De plus, l'utilisation d'analyses multiniveaux a permis de montrer l'existence d'effets de l'école sur le bullying. En particulier, le taux de bullying dans une école donnée augmente lorsque les avis des jeunes divergent par rapport à leur perception du climat scolaire. Un autre constat que l'on peut mettre en évidence est que la réaction des enseignants lors de bagarres a une influence différente sur le taux de bullying en fonction de l'établissement scolaire. ABSTRACT : Bullying is the intentional, repetitive or persistent hurting of one pupil by another (or several), where the relationship involves an imbalance of power. Bullying is a type of aggressive behaviour and the act can be verbal, physical and/or psychological. The consequences on the victims are serious: school failure, depressive symptomatology, eating disorders, or suicidal ideation. Moreover, the authors of bullying display more delinquent behaviour within or outside the school. Thus, preventive programmes targeting bullying could not only prevent victimisation, but also reduce delinquency in general. Very little data concerning bullying had been collected in Switzerland and, except some local or cantonal studies, no national research among teenagers existed in the field. This work intends to fill the gap in order to provide sufficient understanding of the phenomenon and to suggest some tracks for defining appropriate measures of prevention. In order to understand the problems of bullying in Swiss secondary schools better, two surveys of self-reported juvenile delinquency were carried out. The first one took place between 2003 and 2005 in the canton Vaud among more than 4500 pupils, the second in 2006 across Switzerland with about 3600 youths taking part. The pupils answered to the survey either in the classroom (paper questionnaire) or in the computer room (online questionnaire). The youths that answered having seriously bullied another pupil are about 7% in canton Vaud and 4% in the national sample. Statistical analyses have selected the variables most strongly related to bullying. The results show that the youths with a low level of self-control and adopting a positive attitude towards violence are more likely to bully others. The importance of the environmental variables was also shown: the more that youth is supervised and monitored by adults, and the more the authorities (school, neighbourhood) play their role of social control by making the rules be respected through intervening in an impartial way, the less the youth bully. Moreover, the use of multilevel analyses permitted to show the existence of effects of the school on bullying. In particular, the rate of bullying in a given school increases when there is a wide variation among students of the same school in their perception of their school climate. Another important aspect concerns teachers' reactions when pupils fight: this variable does not influence the bullying rate to the same extent, and depends on the school.

A wearable system for multi-segment foot kinetics measurement.

This study aims to design a wearable system for kinetics measurement of multi-segment foot joints in long-distance walking and to investigate its suitability for clinical evaluations. The wearable system consisted of inertial sensors (3D gyroscopes and 3D accelerometers) on toes, forefoot, hindfoot, and shank, and a plantar pressure insole. After calibration in a laboratory, 10 healthy elderly subjects and 12 patients with ankle osteoarthritis walked 50m twice wearing this system. Using inverse dynamics, 3D forces, moments, and power were calculated in the joint sections among toes, forefoot, hindfoot, and shank. Compared to those we previously estimated for a one-segment foot model, the sagittal and transverse moments and power in the ankle joint, as measured via multi-segment foot model, showed a normalized RMS difference of less than 11%, 14%, and 13%, respectively, for healthy subjects, and 13%, 15%, and 14%, for patients. Similar to our previous study, the coronal moments were not analyzed. Maxima-minima values of anterior-posterior and vertical force, sagittal moment, and power in shank-hindfoot and hindfoot-forefoot joints were significantly different between patients and healthy subjects. Except for power, the inter-subject repeatability of these parameters was CMC>0.90 for healthy subjects and CMC>0.70 for patients. Repeatability of these parameters was lower for the forefoot-toes joint. The proposed measurement system estimated multi-segment foot joints kinetics with acceptable repeatability but showed difference, compared to those previously estimated for the one-segment foot model. These parameters also could distinguish patients from healthy subjects. Thus, this system is suggested for outcome evaluations of foot treatments.

Mémoire de la source et hallucinations

De nombreux travaux récemment publiés indiquent que les patients schizophrènes souffrant de symptômes positifs, présentent des déficits en mémoire de la source. L'auteur décrit les différentes difficultés rencontrées. Dans ce contexte, une équipe suisse a élaboré différents exercices de remédiation cognitive, appuyée sur le programme RECOS. Une première évaluation fait ressortir des résultats encourageants.

Late Pan-African magmatism in the Himalaya: new geochronological and geochemical data from the Ordovician Tso Morari metagranites (Ladakh, NW India)

Two granitic plutons, the Tso Morari gneiss and the Rupshu metagranite, crop out in the Tso Morari area. The Polokongka La granite, classically interpreted as a young intrusion in the Tso Morari gneiss, has been recognized as the undeformed facies of the latter. Conventional isotope dilution U-Pb zircon dating on single-grain and small multi-grain fractions yielded magmatic ages of 479 +/- 2 Ma for the Tso Morari gneiss and the Polokongka La granite, and 482.5 +/- 1 Ma for the Rupshu granite. There is a great difference in zircon morphology between the Tso Morari gneiss (peraluminous type) and the Rupshu granite (alkaline type). This difference is confirmed by whole-rock chemistry. The Tso Morari gneiss is a typical deformed S-type granite, resulting from crustal anatexis. On the other hand, the Rupshu granite is an essentially metaluminous alkali-calcic intrusion derived from a different source material. Data compilation from other Himalayan Cambro-Ordovician granites reveals huge and widespread magmatic activity all along and beyond the northern Indian plate between 570 and 450 Ma, with a peak at 500-480 Ma. A major, continental-scale tectonic event is required to generate such a large magmatic belt; it has been tentatively compared to the Variscan post-orogenic extensional regime of Western Europe, as a late evolution stage of a Pan-African orogenic event.

Waveform inversion of crosshole georadar data: influence of source wavelet variability and the suitability of a single wavelet assumption

Waveform-based tomographic imaging of crosshole georadar data is a powerful method to investigate the shallow subsurface because of its ability to provide images of electrical properties in near-surface environments with unprecedented spatial resolution. A critical issue with waveform inversion is the a priori unknown source signal. Indeed, the estimation of the source pulse is notoriously difficult but essential for the effective application of this method. Here, we explore the viability and robustness of a recently proposed deconvolution-based procedure to estimate the source pulse during waveform inversion of crosshole georadar data, where changes in wavelet shape with location as a result of varying near-field conditions and differences in antenna coupling may be significant. Specifically, we examine whether a single, average estimated source current function can adequately represent the pulses radiated at all transmitter locations during a crosshole georadar survey, or whether a separate source wavelet estimation should be performed for each transmitter gather. Tests with synthetic and field data indicate that remarkably good tomographic reconstructions can be obtained using a single estimated source pulse when moderate to strong variability exists in the true source signal with antenna location. Only in the case of very strong variability in the true source pulse are tomographic reconstructions clearly improved by estimating a different source wavelet for each transmitter location.

Identificação de estruturas de processos multi-escala em ecossistemas marinhos utilizando ondaletas

Ecossistemas marinhos de upwelling são muito heterogêneos e apresentam uma intensa atividade de mesoescala de dimensão de dezenas de quilômetros e submesoescala que variam de centenas de metros até quilômetros dos processos físicos. A importância das estruturas dos processos físicos está na estruturação que eles exercem sob a biomassa de zooplâncton. O presente trabalho está relacionado a um estudo realizado a cabo no Norte do Sistema da Corrente de Humboldt (Peru). Utilizou-se duas variáveis, a profundidade do limite superior da zona de mínimo oxigênio (ZMO) e a biomassa de zooplâncton. É desenvolvida uma metodologia de análise baseada no uso de ondaletas para a identi cação das estruturas dos processos físicos em suas diferentes escalas. O método foi aplicado aos dados de ZMO. Estudos de simula ção mostraram que o método tem a capacidade de identi car as estruturas de interesse, tendo erro de estimação nas bordas do espectro da potência de ondaleta. A tipologia das estruturas identi cadas mostraram que existe três tipos de estruturas, estruturas maiores de mesoescala, duas estruturas pequenas de submesoescala com profundidades diferentes. Outro resultado importante foi que dentro das estruturas pequenas e mais profundas existe maior biomassa de zooplâncton, principalmente nas estruturas de downwelling.

The yield of high-density electric source imaging in focal epilepsy

Background: EEG is the cornerstone of epilepsy diagnostics and mandatory to determine the underlying epilepsy syndrome (e.g. focal vs idiopathic generalized). However, its potential as imaging tool is still underrecognized. In the present study, we aim to determine the prerequisites of maximal benefit of electric source imaging (ESI) to localize the irritative zone in patients with focal epilepsy. Methods: 150 patients suffering from focal epilepsy and with minimum 1 year post-operative follow-up were studied prospectively by reviewers blinded to the underlying diagnosis and outcome. We evaluated the influence of two important factors on sensitivity and specificity of ESI: the number of electrodes (low resolution, LR-ESI: \30 vs. high resolution, HR-ESI: 128-256 electrodes), and the use of individual MRI (i-MRI) vs. template MRI (t-MRI) as head model.Results: ESI had a sensitivity of 85% and a specificity of 87% when HR-ESI with i-MRI was used. Using LR-ESI, sensitivity decreased to 68%, or even 57% when only t-MRI was available. The sensitivity of HR-ESI/i-MRI compared favorably with those of MRI (76%), PET (69%) and ictal/interictal SPECT (64%).Interpretation: This study on a large patient group shows excellent sensitivity and specificity of ESI if 128 EEG channels or more are used for ESI and if the results are co-registered to the patient's individual MRI. Localization precision is as high as or even higher than established brain imaging techniques, providing excellent costeffectiveness in epilepsy evaluation. HR-ESI appears to be a valuable additional imaging tool, given that larger electrode arrays are easily and rapidly applied with modern EEG equipment and that structural MRI is nearly always available for these patients.

A High-Resolution 2D/3D Seismic Study of a Thrust Fault Zone in Lake Geneva, Switzerland

P130 A HIGH-RESOLUTION 2D/3D SEISMIC STUDY OF A THRUST FAULT ZONE IN LAKE GENEVA SWITZERLAND M. SCHEIDHAUER M. BERES D. DUPUY and F. MARILLIER Institute of Geophysics University of Lausanne 1015 Lausanne, Switzerland Summary A high-resolution three-dimensional (3D) seismic reflection survey has been conducted in Lake Geneva near the city of Lausanne Switzerland where the faulted molasse basement (Tertiary sandstones) is overlain by complex Quaternary sedimentary structures. Using a single 48-channel streamer an area of 1200 m x 600 m was surveyed in 10 days. With a 5-m shot spacing and a receiver spacing of 2.5 m in the inline direction and 7.5 m in the crossline direction, a 12-fold data coverage was achieved. A maximum penetration depth of ~150 m was achieved with a 15 cu. in. water gun operated at 140 bars. The multi-channel data allow the determination of an accurate velocity field for 3D processing, and they show particularly clean images of the fault zone and the overlying sediments in horizontal and vertical sections. In order to compare different sources, inline 55 was repeated with a 30/30 and a 15/15 cu. in. double-chamber air gun (Mini GI) operated at 100 and 80 bars, respectively. A maximum penetration depth of ~450 m was achieved with this source.