Performance of Supply Chain when using selected Coordination Mechanisms

Coordination among supply chain members is essential for better supply chain performance. An effective method to improve supply chain coordination is to implement proper coordination mechanisms. The primary objective of this research is to study the performance of a multi-level supply chain while using selected coordination mechanisms separately, and in combination, under lost sale and back order cases. The coordination mechanisms used in this study are price discount, delay in payment and different types of information sharing. Mathematical modelling and simulation modelling are used in this study to analyse the performance of the supply chain using these mechanisms. Initially, a three level supply chain consisting of a supplier, a manufacturer and a retailer has been used to study the combined effect of price discount and delay in payment on the performance (profit) of supply chain using mathematical modelling. This study showed that implementation of individual mechanisms improves the performance of the supply chain compared to ‘no coordination’. When more than one mechanism is used in combination, performance in most cases further improved. The three level supply chain considered in mathematical modelling was then extended to a three level network supply chain consisting of a four retailers, two wholesalers, and a manufacturer with an infinite part supplier. The performance of this network supply chain was analysed under both lost sale and backorder cases using simulation modelling with the same mechanisms: ‘price discount and delay in payment’ used in mathematical modelling. This study also showed that the performance of the supply chain is significantly improved while using combination of mechanisms as obtained earlier. In this study, it is found that the effect (increase in profit) of ‘delay in payment’ and combination of ‘price discount’ & ‘delay in payment’ on SC profit is relatively high in the case of lost sale. Sensitivity analysis showed that order cost of the retailer plays a major role in the performance of the supply chain as it decides the order quantity of the other players in the supply chain in this study. Sensitivity analysis also showed that there is a proportional change in supply chain profit with change in rate of return of any player. In the case of price discount, elasticity of demand is an important factor to improve the performance of the supply chain. It is also found that the change in permissible delay in payment given by the seller to the buyer affects the SC profit more than the delay in payment availed by the buyer from the seller. In continuation of the above, a study on the performance of a four level supply chain consisting of a manufacturer, a wholesaler, a distributor and a retailer with ‘information sharing’ as coordination mechanism, under lost sale and backorder cases, using a simulation game with live players has been conducted. In this study, best performance is obtained in the case of sharing ‘demand and supply chain performance’ compared to other seven types of information sharing including traditional method. This study also revealed that effect of information sharing on supply chain performance is relatively high in the case of lost sale than backorder. The in depth analysis in this part of the study showed that lack of information sharing need not always be resulting in bullwhip effect. Instead of bullwhip effect, lack of information sharing produced a huge hike in lost sales cost or backorder cost in this study which is also not favorable for the supply chain. Overall analysis provided the extent of improvement in supply chain performance under different cases. Sensitivity analysis revealed useful insights about the decision variables of supply chain and it will be useful for the supply chain management practitioners to take appropriate decisions.

Settlement history of a mountain oasis in Northern Oman

To unravel the settlement history of oases in northern Oman, data on topography, the agricultural setting, water and soil parameters and archaeological findings were collected in the Wadi Bani Awf with its head oasis Balad Seet. Data collection lasted from April 2000 to April 2003 and was based on the establishment of a 3D-georeferenced map of the oasis comprising all its major infrastructural and agronomic features. At today's Balad Seet, a total of 8.8 ha are planted to 2,800 date palms and 4.6 ha are divided into 385 small fields dedicated to wheat, barley, sorghum, oats, alfalfa, garlic, onion, lime and banana. Radiocarbon dating of charcoal in the lower part of the main terrace system determined its age to 911 ± 43 years. Monthly flow measurements of four major aflaj systems showed a total maximum flow of 32 m^3 h^-1 with the largest falaj contributing 78% of the total flow. During drought periods, average water flow decreased by 3% per month, however, with significant differences between the spring systems. The analysis of the tritium/^3helium ratio in the water led to an estimated water age of up to 10 years. In combination with the flow data, this provided insights into the elasticity of the spring flow over time. The use of the natural resources of the Wadi Bani Awf by a pastoral population started probably in the early 3rd millennium BC. The first permanent settlement might have been established at Balad Seet during the first part of the 1st millennium BC. Presumably it was initiated by settlers from al-Hamra, a village at the southern foot of the Hajar mountains. Given an abundant und stable flow of springs, even in periods of drought, the construction of Balad Seet's first irrigation systems may have occurred at this early time. The combination of topographic, agricultural, hydro-pedological and archaeological data allowed assessment of the carrying capacity of this oasis over the three millennia of its likely existence. The changing scarcity of land and water and the eventual optimisation of their use by different aflaj constructions have been major driving forces for the development and apparent relativeley stable existence of this oasis.

Agricultural Production and Yield Estimation: Two distinctive aspects of Brazilian Agriculture and a perspective on world food problems

Brazil has been increasing its importance in agricultural markets. The reasons are well known to be the relative abundance of land, the increasing technology used in crops, and the development of the agribusiness sector which allow for a fast response to price stimuli. The elasticity of acreage response to increases in expected return is estimated for Soybeans in a dynamic (long term) error correction model. Regarding yield patterns, a large variation in the yearly rates of growth in yield is observed, climate being probably the main source of this variation which result in ‘good’ and ‘bad’ years. In South America, special attention should be given to the El Niño and La Niña phenomena, both said to have important effects on rainfalls patterns and consequently in yield. The influence on El Niño and La Niña in historical data is examined and some ways of estimating the impact of climate on yield of Soybean and Corn markets are proposed. Possible implications of climate change may apply.

Non-linear mechanical behavior of the elastomer polydimethylsiloxane (PDMS) used in the manufacture of microfluidic devices

Polydimethylsiloxane (PDMS) is the elastomer of choice to create a variety of microfluidic devices by soft lithography techniques (eg., [1], [2], [3], [4]). Accurate and reliable design, manufacture, and operation of microfluidic devices made from PDMS, require a detailed characterization of the deformation and failure behavior of the material. This paper discusses progress in a recently-initiated research project towards this goal. We have conducted large-deformation tension and compression experiments on traditional macroscale specimens, as well as microscale tension experiments on thin-film (≈ 50µm thickness) specimens of PDMS with varying ratios of monomer:curing agent (5:1, 10:1, 20:1). We find that the stress-stretch response of these materials shows significant variability, even for nominally identically prepared specimens. A non-linear, large-deformation rubber-elasticity model [5], [6] is applied to represent the behavior of PDMS. The constitutive model has been implemented in a finite-element program [7] to aid the design of microfluidic devices made from this material. As a first attempt towards the goal of estimating the non-linear material parameters for PDMS from indentation experiments, we have conducted micro-indentation experiments using a spherical indenter-tip, and carried out corresponding numerical simulations to verify how well the numerically-predicted P(load-h(depth of indentation) curves compare with the corresponding experimental measurements. The results are encouraging, and show the possibility of estimating the material parameters for PDMS from relatively simple micro-indentation experiments, and corresponding numerical simulations.

The Inertio-Elastic Planar Entry Flow of Low-Viscosity Elastic Fluids in Micro-fabricated Geometries

The non-Newtonian flow of dilute aqueous polyethylene oxide (PEO) solutions through microfabricated planar abrupt contraction-expansions is investigated. The contraction geometries are fabricated from a high-resolution chrome mask and cross-linked PDMS gels using the tools of soft-lithography. The small length scales and high deformation rates in the contraction throat lead to significant extensional flow effects even with dilute polymer solutions having time constants on the order of milliseconds. The dimensionless extra pressure drop across the contraction increases by more than 200% and is accompanied by significant upstream vortex growth. Streak photography and videomicroscopy using epifluorescent particles shows that the flow ultimately becomes unstable and three-dimensional. The moderate Reynolds numbers (0.03 ≤ Re ≤ 44) associated with these high Deborah number (0 ≤ De ≤ 600) microfluidic flows results in the exploration of new regions of the Re-De parameter space in which the effects of both elasticity and inertia can be observed. Understanding such interactions will be increasingly important in microfluidic applications involving complex fluids and can best be interpreted in terms of the elasticity number, El = De/Re, which is independent of the flow kinematics and depends only on the fluid rheology and the characteristic size of the device.

Unemployment insurance in the presence of an informal sector

We study the effect of UI benefits in a typical developing country where the informal sector is sizeable and persistent. In a partial equilibrium environment, ruling out the macroeconomic consequences of UI benefits, we characterize the stationary equilibrium of an economy where policyholders may be employed in the formal sector, short-run unemployed receiving UI benefits or long-run unemployed without UI benefits. We perform comparative static exercises to understand how UI benefits affect unemployed worker´s effort to secure a formal job, their labor supply in the informal sector and leisure time. Our model reveals that an increase in UI benefits generates two opposing effects for the short-run unemployed. First, since search efforts cannot be monitored it generates moral hazard behaviours that lower effort. Second, it generates an income effect as it reduces the marginal cost of searching for a formal job and increases effort.The overall effect is ambiguous and depends on the relative strength of these two effects. Additionally, we show that an increase in UI benefits increases the efforts of long-run unemployed workers. We provide a simple simulation exercise which suggests that the income effect pointed out is not necessarily of second-order importance in comparison with moral hazard strength. This result softens the widespread opinion, usually based on the microeconomic/partial equilibrium argument that the presence of dual labor markets is an obstacle to providing UI in developing countries.

Evidence of induced innovation in US Sectoral Capital’s Shares

We use annual data on capital’s share and relative factor prices from 35 US industries from 1960 to 2005 to test the induced innovation hypothesis. We derive, from a production function framework, testable implications for the effect of contemporaneous and lagged factor price ratios on capital’s share of production. The predicted effect is positive or negative depending on the elasticity of substitution between labor and capital. From panel regressions, the estimated effect of the contemporaneous factor price ratio implies an elasticity of substitution that is less than unity, consistent with the consensus from the literature. Based on this, our negative estimated effects for lagged price ratios are both statistically significant and consistent with the induced innovation hypothesis.