Phase relations and dielectric properties of BaTi03 ceramics heavily substituted with neodymium

Investigations on the phase relations and dielectric properties of (1 -x)BaTiO3 + xNd2/3TiO 3 (BNT) ceramics sintered in air below 1650 K have been carried out. X-ray powder diffraction studies indicate apparent phase singularity for compositions with x < 0.3. Nd2Ti207 is detected at higher neodymium concentrations. The unit cell parameter changes continuously with neodymium content, and BaTiO3 is completely cubic at room temperature with x -- 0.0525, whereas electron diffraction studies indicate that the air-sintered BNT ceramics with x > 0.08 contain additional phases that are partly amorphous even to an electron beam. SEM observations reveal that BaTiO3 grains are mostly covered by a molten intergranular phase, and show the presence of randomly distributed Nd2Ti207 grains. Energy dispersive X-ray analysis shows the Ba-Nd-Ti ternary composition of the intergranular phase. Differential thermal analysis studies support the formation of a partial melt involving dissolution-precipitation of boundary layers of BaTiO3 grains. These complex phase relations are accounted for in terms of the phase instability of BaTiO3 with large cation-vacancy concentration as a result of heavy Nd 3+ substitution. The absence of structural intergrowth in (1 - x)BaTiO3 + xNd2/3TiO3 under oxidative conditions leads to a separation of phases wherein the new phases undergo melting and remain X-ray amorphous. BNT ceramics with 0.1 < x < 0.3 have ~eff >~ 104 with tan 6 < 0.1 and nearly flat temperature capacitance characteristics. The grain-size dependence of ee,, variations of ~eff and tan 6 with the measuring frequency, the non-ohmic resistivities, and the non-linear leakage currents at higher field-strengths which are accompanied by the decrease in eeff and rise in tan 3, are explained on the basis of an intergranular (internal boundary layer) dielectric characteristic of these ceramics.

BaSnO3 fine powders from hydrothermal preparations

Attempts to prepare BaSnO3 by the hydrothermal method starting from SnO2·xH2O gel and Ba (OH)2 solution in teflonlined autoclaves at 150–260°C invariably lead to the formation of a hydrated phase, BaSn(OH)6·3H2O. On heating in air or on releasing the pressure Image at ≈260°C, BaSN (OH)6·3H2O converts to BaSnO3 fine powder which involves the formation of an intermediate oxyhydroxide, BaSnO(OH)4. TEM studies show that particle size of the resulting BaSnO3 ranges from 0.2–0.6 μm. Solid solutions of Ba(Ti, Sn) O3 were prepared from (TiO2+SnO2)·xH2O mixed gel and Ba(OH)2 solutions. Single-phase perovskite Ba(Ti, Sn)O3 was obtained up to 35 atom % Sn. Above this composition, the hydrothermal products are mixtures of BaTiO3 (cubic) and BaSn(OH)6·3H2O which on heating at ≈260°C give rise to BaTiO3+BaSnO3. Annealing at 1000°C results in monophasic Ba(Ti, Sn)O3, in the complete range of Sn/Ti. Formation of the hydrated phase is attributed to the amphoteric nature of SnO2·xH2O gel which stabilises Sn(OH)62− anions under higher H2O-pressures and elevated temperatures. The sintering characteristics and dielectric properties of ceramics prepared from these fine powders are presented.

An extravariation model for improving confidence intervals of population size estimates from removal data

We propose a new model for estimating the size of a population from successive catches taken during a removal experiment. The data from these experiments often have excessive variation, known as overdispersion, as compared with that predicted by the multinomial model. The new model allows catchability to vary randomly among samplings, which accounts for overdispersion. When the catchability is assumed to have a beta distribution, the likelihood function, which is refered to as beta-multinomial, is derived, and hence the maximum likelihood estimates can be evaluated. Simulations show that in the presence of extravariation in the data, the confidence intervals have been substantially underestimated in previous models (Leslie-DeLury, Moran) and that the new model provides more reliable confidence intervals. The performance of these methods was also demonstrated using two real data sets: one with overdispersion, from smallmouth bass (Micropterus dolomieu), and the other without overdispersion, from rat (Rattus rattus).

Size-dependent natural mortality of juvenile banana prawns Penaeus merguiensis in the Gulf of Carpentaria, Australia

Natural mortality of marine invertebrates is often very high in the early life history stages and decreases in later stages. The possible size-dependent mortality of juvenile banana prawns, P. merguiensis (2-15 mm carapace length) in the Gulf of Carpentaria was investigated. The analysis was based on the data collected at 2-weekly intervals by beam trawls at four sites over a period of six years (between September 1986 and March 1992). It was assumed that mortality was a parametric function of size, rather than a constant. Another complication in estimating mortality for juvenile banana prawns is that a significant proportion of the population emigrates from the study area each year. This effect was accounted for by incorporating the size-frequency pattern of the emigrants in the analysis. Both the extra parameter in the model required to describe the size dependence of mortality, and that used to account for emigration were found to be significantly different from zero, and the instantaneous mortality rate declined from 0.89 week(-1) for 2 mm prawns to 0.02 week(-1) for 15 mm prawns.

Does the size of subsamples taken from multispecies trawl catches affect estimates of catch composition and abundance?

Although subsampling is a common method for describing the composition of large and diverse trawl catches, the accuracy of these techniques is often unknown. We determined the sampling errors generated from estimating the percentage of the total number of species recorded in catches, as well as the abundance of each species, at each increase in the proportion of the sorted catch. We completely partitioned twenty prawn trawl catches from tropical northern Australia into subsamples of about 10 kg each. All subsamples were then sorted, and species numbers recorded. Catch weights ranged from 71 to 445 kg, and the number of fish species in trawls ranged from 60 to 138, and invertebrate species from 18 to 63. Almost 70% of the species recorded in catches were "rare" in subsamples (less than one individual per 10 kg subsample or less than one in every 389 individuals). A matrix was used to show the increase in the total number of species that were recorded in each catch as the percentage of the sorted catch increased. Simulation modelling showed that sorting small subsamples (about 10% of catch weights) identified about 50% of the total number of species caught in a trawl. Larger subsamples (50% of catch weight on average) identified about 80% of the total species caught in a trawl. The accuracy of estimating the abundance of each species also increased with increasing subsample size. For the "rare" species, sampling error was around 80% after sorting 10% of catch weight and was just less than 50% after 40% of catch weight had been sorted. For the "abundant" species (five or more individuals per 10 kg subsample or five or more in every 389 individuals), sampling error was around 25% after sorting 10% of catch weight, but was reduced to around 10% after 40% of catch weight had been sorted.

Confucian education and enlightenment for the masses in the manner of Guwen guanzhi

The topic of this study is the most renowned anthology of essays written in Literary Chinese, Guwen guanzhi, compiled and edited by Wu Chengquan (Chucai) and Wu Dazhi (Diaohou), and first published during the Qing dynasty, in 1695. Because of the low social standing of the compilers, their anthology remained outside the recommended study materials produced by members of the established literati and used for preparing students in the imperial civil-service examinations. However, since the end of the imperial era, Guwen guanzhi has risen to a position as the classical anthology par excellence. Today it is widely used as required or supplementary reading material of Literary Chinese in middle-schools both in Mainland China and on Taiwan. The goal of this study is to explain the persistent longevity of the anthology. So far, Guwen guanzhi has not been a topic of any published academic study, and the opinions expressed on it in various sources are widely discrepant. Through a comparative study with a dozen classical Chinese anthologies in use during the early Qing dynasty, this study reveals the extent to which the compilers of Guwen guanzhi modelled their work after other selections. Altogether 86 % of the texts in Guwen guanzhi originate from another Qing era anthology, Guwen xiyi, often copied character by character. However, the notes and commentaries are all different. Concentrating on the special characteristics unique to Guwen guanzhi—the commentaries and certain peculiarities in the selection of texts—this study then discusses the possible reasons for the popularity of Guwen guanzhi over the competing readers during the Qing era. Most remarkably, Guwen guanzhi put in practise the equalitarian, educational ideals of the Ming philosopher Wang Shouren (Yangming). Thus Guwen guanzhi suited the self-enlightenment needs of the ”subordinate classes”, in particular the rising middle-class comprised mainly of merchants. The lack of moral teleology, together with the compact size, relative comprehensiveness of the selection and good notes and comments, have made Guwen guanzhi well suited for the new society since the abolition of the imperial examination system. Through a content analysis, based on a sample of the texts, this study measures the relative emphasis on centralism and localism (both in concrete and spiritual terms) expressed in the texts of Guwen guanzhi. The analysis shows that the texts manifest some bias towards emphasising innate virtue on the expense of state-defined moral. This may reflect hidden critique towards intellectual oppression by the centralised imperial rule. During the early decades of the Qing era, such critique was often linked to Ming-loyalism. Finally, this study concludes that the kind of ”spiritual localism” that Guwen guanzhi manifests gives it the potential to undermine monolithic orthodoxy even in today’s Chinese societies. This study has progressed hand in hand with the translation of a selection of texts from Guwen guanzhi into Finnish, published by Gaudeamus Helsinki University Press: Jadekasvot – Valittuja tarinoita Kiinan muinaisajoilta (2005), Jadelähde – Valittuja kirjoituksia Kiinan keskiajalta (2007) and Jadepeili – Valittuja kirjoituksia keisarillisen Kiinan kulta-ajoilta (2008). All translations are critical editions, complete with extensive notation. The trilogy is the first comprehensive translation based on Guwen guanzhi in a European language.

Influence of heat treatment on the strength and fracture behaviour of Fe-12Cr-6Al ferritic stainless steel

The changes in the tensile properties and fracture mode brought about by heat treatment of Fe-12Cr-6Al ferritic stainless steel have been studied. A favourable combination of high strength and good ductility is obtained by heating the material at 1370 K for 2 h followed by a water quench. The high-temperature treatment results in carbide dissolution as well as an increase in the grain size. The mechanism of strengthening has been evaluated from the apparent activation energy (28 kJ mol–1) and is identified to be the unpinning of dislocations from the atmosphere of carbon atoms. As the heat-treatment temperature is increased, the fracture behaviour changes from ductile to brittle mode and this is related to the changes in grain size and friction stress.

Some Considerations on the Occurrence of Intergranular Fracture during Fatigue Crack growth in Steels

The occurrence of a maximum in the percentage of intergranular fracture on the fracture surface during the transition from intermediate to low fatigue crack growth rates has been observed for a high strength steel. It is suggested that transgranular planar slip leading to slip localization is essential in promoting intergranular fracture when the cyclic plastic zone size becomes equal to the prior austenite grain size.

Given and News : Media discourse and the construction of community on national days

National anniversaries such as independence days demand precise coordination in order to make citizens change their routines to forego work and spend the day at rest or at festivities that provide social focus and spectacle. The complex social construction of national days is taken for granted and operates as a given in the news media, which are the main agents responsible for coordinating these planned disruptions of normal routines. This study examines the language used in the news to construct the rather unnatural idea of national days and to align people in observing them. The data for the study consist of news stories about the Fourth of July in the New York Times, sampled over 150 years and are supplemented by material from other sources and other countries. The study is multidimensional, applying concepts from pragmatics (speech acts, politeness, information structure), systemic functional linguistics (the interpersonal metafunction and the Appraisal framework) and cognitive linguistics (frames, metaphor) as well as journalism and communications to arrive at an interdisciplinary understanding of how resources for meaning are used by writers and readers of the news stories. The analysis shows that on national anniversaries, nations tend to be metaphorized as persons having birthdays, to whom politeness should be shown. The face of the nation is to be respected in the sense of identifying the nation's interests as one's own (positive face) and speaking of citizen responsibilities rather than rights (negative face). Resources are available for both positive and negative evaluations of events and participants and the newspaper deftly changes footings (Goffman 1981) to demonstrate the required politeness while also heteroglossically allowing for a certain amount of disattention and even protest - within limits, for state holidays are almost never construed as Bakhtinian festivals, as they tend to reaffirm the hierarchy rather than invert it. Celebrations are evaluated mainly for impressiveness, and for the essentially contested quality of appropriateness, which covers norms of predictability, size, audience response, aesthetics, and explicit reference to the past. Events may also be negatively evaluated as dull ("banal") or inauthentic ("hoopla"). Audiences are evaluated chiefly in terms of their enthusiasm, or production of appropriate displays for emotional response, for national days are supposed to be occasions of flooding-out of nationalistic feeling. By making these evaluations, the newspaper reinforces its powerful position as an independent critic, while at the same time playing an active role in the construction and reproduction of emotional order embodied in "the nation's birthday." As an occasion for mobilization and demonstrations of power, national days may be seen to stand to war in the relation of play to fighting (Bateson 1955). Evidence from the newspaper's coverage of recent conflicts is adduced to support this analysis. In the course of the investigation, methods are developed for analyzing large collections of newspaper content, particularly topical soft news and feature materials that have hitherto been considered less influential and worthy of study than so-called hard news. In his work on evaluation in newspaper stories, White (1998) proposed that the classic hard news story is focused on an event that threatens the social order, but news of holidays and celebrations in general does not fit this pattern, in fact its central event is a reproduction of the social order. Thus in the system of news values (Galtung and Ruge 1965), national holiday news draws on "ground" news values such as continuity and predictability rather than "figure" news values such as negativity and surprise. It is argued that this ground helps form a necessary space for hard news to be seen as important, similar to the way in which the information structure of language is seen to rely on the regular alternation of given and new information (Chafe 1994).

Studies in Nonlinear Optical Materials: Structure of 3-Menthyl 2-[Bis(dimethylarnino)methylene]-3-oxobutyrate Hemihydrate

C 19Ha4N203.~xH 2 O, Mr= 347.5, monoclinic, C2, a = 15.473 (3), b = 6.963 (2), c = 20.708 (4) ]1, //=108.2(2) ° , V=2119(2)A 3, Z=4, Ox= 1.089 Mg m -3, ,~(Cu Ktx) = 1.5418 ]1, p = 0.523 mm -~, F(000) = 760.0, T= 293 K, R = 0.068 for 1967 unique reflections. The C=C bond length is 1-447 (6)]1, significantly longer than in ethylene, 1.336 (2)]1. The crystal structure is stabilized by O-H...O hydrogen bonding. Explanation for the observed low second-harmonic-generation efficiency (0.5 times that of urea) is provided.

A Bayesian decision approach for sample size determination in phase II trials

Stallard (1998, Biometrics 54, 279-294) recently used Bayesian decision theory for sample-size determination in phase II trials. His design maximizes the expected financial gains in the development of a new treatment. However, it results in a very high probability (0.65) of recommending an ineffective treatment for phase III testing. On the other hand, the expected gain using his design is more than 10 times that of a design that tightly controls the false positive error (Thall and Simon, 1994, Biometrics 50, 337-349). Stallard's design maximizes the expected gain per phase II trial, but it does not maximize the rate of gain or total gain for a fixed length of time because the rate of gain depends on the proportion: of treatments forwarding to the phase III study. We suggest maximizing the rate of gain, and the resulting optimal one-stage design becomes twice as efficient as Stallard's one-stage design. Furthermore, the new design has a probability of only 0.12 of passing an ineffective treatment to phase III study.

Variable Size Population NSGA-II: VPNSGA-II

Multi-objective optimization is an active field of research with broad applicability in aeronautics. This report details a variant of the original NSGA-II software aimed to improve the performances of such a widely used Genetic Algorithm in finding the optimal Pareto-front of a Multi-Objective optimization problem for the use of UAV and aircraft design and optimsaiton. Original NSGA-II works on a population of predetermined constant size and its computational cost to evaluate one generation is O(mn^2 ), being m the number of objective functions and n the population size. The basic idea encouraging this work is that of reduce the computational cost of the NSGA-II algorithm by making it work on a population of variable size, in order to obtain better convergence towards the Pareto-front in less time. In this work some test functions will be tested with both original NSGA-II and VPNSGA-II algorithms; each test will be timed in order to get a measure of the computational cost of each trial and the results will be compared.

Laser surface cladding of MRI 153M magnesium alloy with (Al+Al2O3)

Laser surface cladding was carried out on a creep-resistant MRI 153M magnesium alloy with a mixture of Al and Al2O3 powders using a pulsed Nd:YAG laser at scan speeds of 21, 42, 63 and 84 mm/s. The Al2O3 particles partially or completely melted during laser irradiation and re-solidified with irregular shapes in the size range of 5–60 µm along with a few islands as large as 500 µm, within the grain-refined Mg-rich dendritic matrix. More than an order of magnitude improvement in wear resistance after cladding was attributed to the presence of ultra-hard Al2O3 particles, increased solid solubility of Al and other alloying elements, and a very fine dendritic microstructure as a result of rapid solidification in the cladded layer. However, corrosion resistance of the laser cladded alloy was reduced by almost an order of magnitude compared to that of the as-cast alloy mainly due to the presence of cracks and pores in the cladded layer.

Contribution of texture to the strengthening and fracture in hot-rolled magnesium-12.7 at % cadmium alloy

The grain size dependencies of the yield and fracture stresses in hot rolled Mg-12.7 at % Cd alloy have been measured in the temperature range 77 to 420 K and are found to be in accordance with HalI-Petch type of equations. In hot rolled Mg-12.7 Cd alloy, the HalI-Petch intercept a w is higher than that in hot rolled magnesium, while the slope ky is comparable. The fracture is intercrystalline at 77 K, mixed mode at 300 K and ductile at 420 K. The above flow and fracture behaviours are interpreted in terms of the complimentary effects of texture hardening and solid solution strengthening.

Civil Procedure — Commentary and Materials, 6th Edition

This book provides a comprehensive analysis of the practical and theoretical issues encountered in Australian civil procedure, including alternative dispute resolution. Each chapter features in-depth questions and notes together with lists of further reading to aid understanding of the issue. It also examines and discusses each substantive and procedural step in the trial process. Topics include jurisdiction of a court to consider a matter, alternative dispute resolution, limitations of actions, commencing proceedings, group proceedings, pleading, summary disposition, gathering evidence, affidavits, interlocutory procedures, settlement, trial and appeal, costs Each of the state, territory and federal procedures is covered.