Qualidade da semente e densidade de semeadura no estabelecimento e na produtividade do milho.

Uma das principais causas da baixa produtividade de milho é a qualidade da semente, que afeta o estande inicial, o vigor das plantas, e conseqüentemente, a produtividade. O objetivo deste trabalho foi determinar o efeito da qualidade da semente e a densidade de semeadura no estabelecimento e na produtividade de milho. Quatro lotes de sementes de milho BRS 201, com germinação de 95%, 90%, 85% e 75%, foram semeados em três densidades de semeadura: 50, 60 e 70 mil sementes/ha, nos anos de 1996/97 e 1997/98. A baixa qualidade da semente provocou reduções acentuadas na emergência de campo, no número de plantas e, conseqüentemente, na produtividade do milho BRS 201.O aumento da densidade de 50 para 70 mil sementes/ha, na semeadura, não compensou a redução da qualidade da semente. Para o acréscimo de 15% na germinação, foi observado, em média, um ganho de produtividade de 30%. Com base nos resultados destes trabalho, recomenda-se aos produtores de milho a utilização de lotes de sementes com germinação superior a 90% e densidade de semeadura entre 50 e 60 mil sementes/ha.

Automated Assembly Using Feature Localization

Automated assembly of mechanical devices is studies by researching methods of operating assembly equipment in a variable manner; that is, systems which may be configured to perform many different assembly operations are studied. The general parts assembly operation involves the removal of alignment errors within some tolerance and without damaging the parts. Two methods for eliminating alignment errors are discussed: a priori suppression and measurement and removal. Both methods are studied with the more novel measurement and removal technique being studied in greater detail. During the study of this technique, a fast and accurate six degree-of-freedom position sensor based on a light-stripe vision technique was developed. Specifications for the sensor were derived from an assembly-system error analysis. Studies on extracting accurate information from the sensor by optimally reducing redundant information, filtering quantization noise, and careful calibration procedures were performed. Prototype assembly systems for both error elimination techniques were implemented and used to assemble several products. The assembly system based on the a priori suppression technique uses a number of mechanical assembly tools and software systems which extend the capabilities of industrial robots. The need for the tools was determined through an assembly task analysis of several consumer and automotive products. The assembly system based on the measurement and removal technique used the six degree-of-freedom position sensor to measure part misalignments. Robot commands for aligning the parts were automatically calculated based on the sensor data and executed.

Representing and Reasoning About Change in Geologic Interpretation

Geologic interpretation is the task of inferring a sequence of events to explain how a given geologic region could have been formed. This report describes the design and implementation of one part of a geologic interpretation problem solver -- a system which uses a simulation technique called imagining to check the validity of a candidate sequence of events. Imagining uses a combination of qualitative and quantitative simulations to reason about the changes which occured to the geologic region. The spatial changes which occur are simulated by constructing a sequence of diagrams. The quantitative simulation needs numeric parameters which are determined by using the qualitative simulation to establish the cumulative changes to an object and by using a description of the current geologic region to make quantitative measurements. The diversity of reasoning skills used in imagining has necessitated the development of multiple representations, each specialized for a different task. Representations to facilitate doing temporal, spatial and numeric reasoning are described in detail. We have also found it useful to explicitly represent processes. Both the qualitative and quantitative simulations use a discrete 'layer cake' model of geologic processes, but each uses a separate representation, specialized to support the type of simulation. These multiple representations have enabled us to develop a powerful, yet modular, system for reasoning about change.

International transport costs and the margins of Intra-Latin American maritime trade.

This paper focuses on the analysis of the relationship between maritime trade and transport cost in Latin America. The analysis is based on disaggregated (SITC 5 digit level) trade data for intra Latin maritime trade routes over the period 1999-2004. The research contributes to the literature by disentangling the effects of transport costs on the range of traded goods (extensive margin) and the traded volumes of goods (intensive margin) of international trade in order to test some of the predictions of the trade theories that introduce firm heterogeneity in productivity, as well as fixed costs of exporting. Recent investigations show that spatial frictions (distance) reduce trade mainly by trimming the number of shipments and that most firms ship only to geographically proximate customers, instead of shipping to many destinations in quantities that decrease in distance. Our analyses confirm these findings and show that the opposite pattern is observed for ad-valorem freight rates that reduce aggregate trade values mainly by reducing the volume of imported goods (intensive margin).

The use of podcasts to enhance research-teaching linkages in undergraduate nursing students.

An understanding of research is important to enable nurses to provide evidencebasedcare. However, undergraduate nursing students often find research a challenging subject. The purpose of this paper is to present an evaluation of the introduction of podcasts in an undergraduate research module to enhance research teaching linkages between the theoretical content and research in practice and improve the level of student support offered in a blended learning environment. Two cohorts of students (n=228 and n=233) were given access to a series of 5 “guest speaker” podcasts made up of presentations and interviews with research experts within Edinburgh Napier. These staff would not normally have contact with students on this module, but through the podcasts were able to share their research expertise and methods with our learners. The main positive results of the podcasts suggest the increased understanding achieved by students due to the multi-modal delivery approach, a more personal student/tutor relationship leading to greater engagement, and the effective use of materials for revision and consolidation purposes. Negative effects of the podcasts centred around problems with the technology, most often difficulty in downloading and accessing the material. This paper contributes to the emerging knowledge base of podcasting in nurse education by demonstrating how podcasts can be used to enhance research-teaching linkages and raises the question of why students do not exploit the opportunities for mobile learning.

Entrepreneurship and rural economic development: a scenario analysis approach

Fuller-Love, N., Midmore, P., Thomas, D., Henley, A. (2006). Entrepreneurship and rural economic development: A scenario analysis approach. International Journal of Entrepreneurial Behaviour and Research, 12 (5), 289-305. RAE2008

Spatial distribution of upland beetles in relation to landform, vegetation and grazing management

Dennis, P., Aspinall, R. J., Gordon, I. J. (2002). Spatial distribution of upland beetles in relation to landform vegetation and grazing management. Basic and Applied Ecology, 3 (2), 183?193. Sponsorship: SEERAD RAE2008

Asian Christology and the Mahayana : a reprint of the century-old "Indian Church History", by Thomas Yeates ; and the further investigation of the religion of the Orient as influenced by the Apostle of the Hindus and Chinese

http://www.archive.org/details/asianchristology00gorduoft

IDENTIFYING AND MONITORING THE ROLES OF CAVITATION IN HEATING FROM HIGH-INTENSITY FOCUSED ULTRASOUND

For high-intensity focused ultrasound (HIFU) to continue to gain acceptance for cancer treatment it is necessary to understand how the applied ultrasound interacts with gas trapped in the tissue. The presence of bubbles in the target location have been thought to be responsible for shielding the incoming pressure and increasing local heat deposition due to the bubble dynamics. We lack adequate tools for monitoring the cavitation process, due to both limited visualization methods and understanding of the underlying physics. The goal of this project was to elucidate the role of inertial cavitation in HIFU exposures in the hope of applying noise diagnostics to monitor cavitation activity and control HIFU-induced cavitation in a beneficial manner. A number of approaches were taken to understand the relationship between inertial cavitation signals, bubble heating, and bubble shielding in agar-graphite tissue phantoms. Passive cavitation detection (PCD) techniques were employed to detect inertial bubble collapses while the temperature was monitored with an embedded thermocouple. Results indicate that the broadband noise amplitude is correlated to bubble-enhanced heating. Monitoring inertial cavitation at multiple positions throughout the focal region demonstrated that bubble activity increased prefocally as it diminished near the focus. Lowering the HIFU duty cycle had the effect of maintaining a more or less constant cavitation signal, suggesting the shielding effect diminished when the bubbles had a chance to dissolve during the HIFU off-time. Modeling the effect of increasing the ambient temperature showed that bubbles do not collapse as violently at higher temperatures due to increased vapor pressure inside the bubble. Our conclusion is that inertial cavitation heating is less effective at higher temperatures and bubble shielding is involved in shifting energy deposition at the focus. The use of a diagnostic ultrasound imaging system as a PCD array was explored. Filtering out the scattered harmonics from the received RF signals resulted in a spatially- resolved inertial cavitation signal, while the amplitude of the harmonics showed a correlation with temperatures approaching the onset of boiling. The result is a new tool for detecting a broader spectrum of bubble activity and thus enhancing HIFU treatment visualization and feedback.

PHOTOREFRACTIVE CRYSTAL-BASED ACOUSTO-OPTIC IMAGING IN THE NEAR-INFRARED AND ITS APPLICATIONS

Acousto-optic (AO) sensing and imaging (AOI) is a dual-wave modality that combines ultrasound with diffusive light to measure and/or image the optical properties of optically diffusive media, including biological tissues such as breast and brain. The light passing through a focused ultrasound beam undergoes a phase modulation at the ultrasound frequency that is detected using an adaptive interferometer scheme employing a GaAs photorefractive crystal (PRC). The PRC-based AO system operating at 1064 nm is described, along with the underlying theory, validating experiments, characterization, and optimization of this sensing and imaging apparatus. The spatial resolution of AO sensing, which is determined by spatial dimensions of the ultrasound beam or pulse, can be sub-millimeter for megahertz-frequency sound waves.A modified approach for quantifying the optical properties of diffuse media with AO sensing employs the ratio of AO signals generated at two different ultrasound focal pressures. The resulting “pressure contrast signal” (PCS), once calibrated for a particular set of pressure pulses, yields a direct measure of the spatially averaged optical transport attenuation coefficient within the interaction volume between light and sound. This is a significant improvement over current AO sensing methods since it produces a quantitative measure of the optical properties of optically diffuse media without a priori knowledge of the background illumination. It can also be used to generate images based on spatial variations in both optical scattering and absorption. Finally, the AO sensing system is modified to monitor the irreversible optical changes associated with the tissue heating from high intensity focused ultrasound (HIFU) therapy, providing a powerful method for noninvasively sensing the onset and growth of thermal lesions in soft tissues. A single HIFU transducer is used to simultaneously generate tissue damage and pump the AO interaction. Experimental results performed in excised chicken breast demonstrate that AO sensing can identify the onset and growth of lesion formation in real time and, when used as feedback to guide exposure parameters, results in more predictable lesion formation.

EVALUATION OF HARMONIC MOTION ELASTOGRAPHY AND ACOUSTO-­OPTIC IMAGING FOR MONITORING LESION FORMATION BY HIGH INTENSITY FOCUSED ULTRASOUND

Malignant or benign tumors may be ablated with high‐intensity focused ultrasound (HIFU). This technique, known as focused ultrasound surgery (FUS), has been actively investigated for decades, but slow to be implemented and difficult to control due to lack of real‐time feedback during ablation. Two methods of imaging and monitoring HIFU lesions during formation were implemented simultaneously, in order to investigate the efficacy of each and to increase confidence in the detection of the lesion. The first, Acousto‐Optic Imaging (AOI) detects the increasing optical absorption and scattering in the lesion. The intensity of a diffuse optical field in illuminated tissue is mapped at the spatial resolution of an ultrasound focal spot, using the acousto‐optic effect. The second, Harmonic Motion Imaging (HMI), detects the changing stiffness in the lesion. The HIFU beam is modulated to force oscillatory motion in the tissue, and the amplitude of this motion, measured by ultrasound pulse‐echo techniques, is influenced by the stiffness. Experiments were performed on store‐bought chicken breast and freshly slaughtered bovine liver. The AOI results correlated with the onset and relative size of forming lesions much better than prior knowledge of the HIFU power and duration. For HMI, a significant artifact was discovered due to acoustic nonlinearity. The artifact was mitigated by adjusting the phase of the HIFU and imaging pulses. A more detailed model of the HMI process than previously published was made using finite element analysis. The model showed that the amplitude of harmonic motion was primarily affected by increases in acoustic attenuation and stiffness as the lesion formed and the interaction of these effects was complex and often counteracted each other. Further biological variability in tissue properties meant that changes in motion were masked by sample‐to‐sample variation. The HMI experiments predicted lesion formation in only about a quarter of the lesions made. In simultaneous AOI/HMI experiments it appeared that AOI was a more robust method for lesion detection.

What Are Polymorphically-Typed Ambients?

Abstract: The Ambient Calculus was developed by Cardelli and Gordon as a formal framework to study issues of mobility and migrant code. We consider an Ambient Calculus where ambients transport and exchange programs rather that just inert data. We propose different senses in which such a calculus can be said to be polymorphically typed, and design accordingly a polymorphic type system for it. Our type system assigns types to embedded programs and what we call behaviors to processes; a denotational semantics of behaviors is then proposed, here called trace semantics, underlying much of the remaining analysis. We state and prove a Subject Reduction property for our polymorphically typed calculus. Based on techniques borrowed from finite automata theory, type-checking of fully type-annotated processes is shown to be decidable; the time complexity of our decision procedure is exponential (this is a worst-case in theory, arguably not encountered in practice). Our polymorphically-typed calculus is a conservative extension of the typed Ambient Calculus originally proposed by Cardelli and Gordon.

Optimisation of Smart Grid performance using centralised and distributed control techniques

A massive change is currently taking place in the manner in which power networks are operated. Traditionally, power networks consisted of large power stations which were controlled from centralised locations. The trend in modern power networks is for generated power to be produced by a diverse array of energy sources which are spread over a large geographical area. As a result, controlling these systems from a centralised controller is impractical. Thus, future power networks will be controlled by a large number of intelligent distributed controllers which must work together to coordinate their actions. The term Smart Grid is the umbrella term used to denote this combination of power systems, artificial intelligence, and communications engineering. This thesis focuses on the application of optimal control techniques to Smart Grids with a focus in particular on iterative distributed MPC. A novel convergence and stability proof for iterative distributed MPC based on the Alternating Direction Method of Multipliers is derived. Distributed and centralised MPC, and an optimised PID controllers' performance are then compared when applied to a highly interconnected, nonlinear, MIMO testbed based on a part of the Nordic power grid. Finally, a novel tuning algorithm is proposed for iterative distributed MPC which simultaneously optimises both the closed loop performance and the communication overhead associated with the desired control.

Molecular analysis of virulence mechanisms associated with adherent-invasive Escherichia coli (AIEC)

Crohn's Disease (CD) is a chronic inflammatory bowel disease of unknown etiology. Recent work has shown that a new pathotype of Escherichia coli, Adherent Invasive E. coli (AIEC) may be associated with CD. AIEC has been shown to adhere to and invade epithelial cells and to replicate within macrophages (together this is called the AIEC phenotype). In this thesis, the AIEC phenotype of 84 E. coli strains were determined in order to identify the prevalence of this phenotype within the E. coli genus. This study showed that a significant proportion of E. coli strains (approx. 5%) are capable of adhering to and invading epithelial cells and undergoing intramacrophage replication. Moreover, the results presented in this study indicate a correlation between survival in macrophage and resistance to grazing by amoeba supporting the coincidental evolution hypothesis that resistance to amoebae could be a driving force in the evolution of pathogenicity in some bacteria, such as AIEC. In addition, this study has identified an important regulatory role for the CpxA/R two component system (TCS) in the invasive abilities of AIEC HM605, a colonic mucosa-associated CD isolate. A mutation in cpxR was shown to be defective in the invasion of epithelial cells and this defect was shown to be independent of motility or the expression of Type 1 fimbriae, factors that have been shown to be involved in the invasion of another strain of AIEC, isolated from a patient with ileal CD, called LF82. The CpxA/R TCS responds to disturbances in the cell envelope and has been implicated in the virulence of a number of Gram negative pathogens. In this study it is shown that the CpxA/R TCS regulates the expression of a potentially novel invasin called SinH. SinH is found in a number of invasive strains of E. coli and Salmonella. Moreover work presented here shows that a critical mechanism underpinning AIEC persistence in macrophages is the repair of DNA bases damaged by macrophage oxidants. Together these findings provide evidence to suggest that AIEC are a diverse group of E. coli and possess diverse molecular mechanisms and virulence factors that contribute to the AIEC phenotype. In addition, AIEC may have gone through different evolutionary histories acquiring various molecular mechanisms ultimately culminating in the AIEC phenotype. The gastrointestinal (GI) tract harbors a diverse microbiota; most are symbiotic or commensal however some bacteria have the potential to cause disease (pathobiont). The work presented here provides evidence to support the model that AIEC are pathobionts. AIEC strains can be carried as commensals in healthy guts however, when the intestinal homeostasis is disrupted, such as in the compromised gut of CD patients, AIEC may behave as opportunistic pathogens and cause and/or contribute to disease by driving intestinal inflammation.