SEM studies on the leaf indumentum of six Melastomataceae species from Brazilian Cerrado

The wide diversity of their trichomes, which vary from simple unicellular to very complex structures, is a remarkable characteristic in Melastomataceae. This paper characterizes the leaf indumentum of Miconia albicans (Sw.) Triana, M. chamissois Naudin, M. fallax DC., M. ligustroides (DC.) Naudin, Microlepis oleaefolia (DC.) Triana and Rhynchanthera dichotoma DC., typical species from Brazilian cerrado. Samples collected from the median third of young and mature leaf blades were processed following the usual scanning electron microscopy techniques (SEM). We observed ten morphological types of trichomes and four of emergences. With five different types, four of which are reported for the first time, Rhynchanthera dichotoma is the species that presents the most diverse indumenta. A mixed type of trichome formed by a glandular and a branched non-glandular portion called lateral-gland was observed in M. ligustroides. Such non-glandular portion presents different degrees of development. A correlation is suggested between the stage of development of the non-glandular portion and the exposition to light of these lateral gland on young leaves.

Anti-nociceptive effects of Carpolobia lutea G. Don (Polygalaceae) leaf fractions in animal models

Leaves from Carpolobia lutea (Polygalaceae) were screened to establish the antiulcer ethnomedicinal claim and to quantitatively isolate, elucidate the active compounds by semi-preparative HPLC. The anti-nociceptive effects of Carpolobia lutea (CL) G. Don (Polygalaceae) organic leaf extracts were tested in experimental models in mice. The anti-nociceptive mechanism was determined using tail-flick test, acetic acid-induced abdominal constrictions, formalin-induced hind paw licking and the hot plate test. The fractions (ethanol, ethyl acetate, chloroform, n-hexane) and crude ethyl acetate extract of CL (770 mg/kg, i.p.) produced significant inhibitions of both phases of the formalin-induced pain in mice, a reduction in acetic acid-induced writhing as well as and an elevation of the pain threshold in the hot plate test in mice. The inhibitions were greater to those produced by indomethacin (5 mg/kg, i.p.). Ethyl acetate fraction revealed cinnamic and coumaric acids derivatives, which are described for the first time in literature. These cinnamalglucosides polyphenols characterised from CL may in part account for the pharmacological activities. These findings confirm its ethnomedical use in anti-inflammatory pain and in pains from gastric ulcer-associated symptoms. © 2011 Springer Basel AG.

Analysis of hybrid layer thickness, resin tag length and their correlation with microtensile bond strength using a total etch adhesive to intact dentin.

The objective of this study was to evaluate the use of a two-step total etch and rinse adhesive, the correlation between the hyybrid layer thickness (HL) and bond strength (BS), and between resin tag length (RT) and bond strength in the same teeth, and also to evaluate the fracture patterns of the tested specimens. Ten human molars were used for the restorative procedure and then sectioned in two halves (mesio-distally). The materials used were Adper Single Bond 2, 3M ESPE, Ultra etch gel, Ultradent and Filtek Z250, 3M ESPE. One half were utilized to measure the HL thickness and RT length through light microscopy analysis (400x), and the other half was subject to a microtensile test to measure the BS. The fractured surfaces were analyzed by scanning electron microscopy and fracture patterns classified. The Pearson correlation test was applied (p = 0.05). The results of the analyses of each specimen then were correlated: mean HL thickness = 4.39 (0.48) microm, mean length of RT = 9.94 (1.69) microm, mean BS = 23.98 (10.24) MPa. A statistically significant correlation between HL thickness and bond strength was found (r = 0.93). The two step etch and rinse adhesive system, showed a strong correlation between HL thickness and bond strength. The most common fractures were adhesive, followed by cohesive in resin.

Influence of the hybrid layer thickness and resin tag length on microtensile bond strength.

The purpose of this study was to evaluate the correlation between the hybrid layer thickness/resin tag length and the microtensile bond strength of conventional two-step adhesive system, when applied to healthy dentinal tissue. After performing the restorative adhesive procedures and tooth extractions, ten specimens were sectioned in the mesiodistal direction. One section was used for microscopic analysis of the resin tag lengths and the hybrid layer thickness, while the other was used for the microtensile bond strength test (0.5 mm/min). The fractured surface was classified according to the fracture pattern, under a stereoscopic microscope at 40x magnification. Data obtained were submitted to analysis using one-way ANOVA and Pearson's Correlation test (alpha=0.05). The means corresponding to the hybrid layer thickness, resin tag lengths and the microtensile test were 2.68 microm, 6.43 microm and 16.23 MPa, respectively. There was no correlation between the means of the values obtained for the microtensile test, and those presented by the hybrid layer (r2=0.40, p>0.05) and resin tags (r2=0.21, p>0.05). The microtensile bond strength of the conventional two-step adhesive system Adper Single Bond 2 did not depend on the thickness of the hybrid layer and length of resin tags.

Evaluation of the toxicity of Virola sebifera crude extracts, fractions and isolated compounds on the nest of leaf-cutting ants

The phytochemical study of Virola sebifera leaves led to the isolation of three lignans: (+)-sesamin, (-)-hinokinin, and (-)-kusunokinin and three flavonoids: quercetin-3-O - L-rhamnoside, quercetin-3-O - D-glucoside, and quercetin-3-methoxy-7-O - D-glucoside by using techniques as high-speed counter-current chromatography and high-performance liquid chromatography. The crude extracts, fractions, and isolated compounds were evaluated for their insecticidal and fungicidal potential against Atta sexdens rubropilosa and its symbiotic fungus Leucoagaricus gongylophorus. The bioassay results showed a high insecticidal activity for the methanol crude extract of the leaves of V. sebifera and its n-hexane, dichloromethane and ethyl acetate fractions. The fungicidal bioassay revealed high toxicity of the lignans against L. gongylophorus. © 2012 Keylla Utherdyany Bicalho et al.

Impact of climate change on the phoma leaf spot of coffee in Brazil

The potential impact of global climate change on the spatial-temporal distribution of phoma leaf spot of coffee in Brazil was evaluated. Maps were prepared with the favorability of the climate to the occurrence of the disease in the current period and future. The future scenarios used were centered for the decades of 2010-2030, 2040-2060, and 2070-2090 (scenarios A2 and B2). These scenarios were obtained from six global climate models (GCM's) provided by the Intergovernmental Panel on Climate Change (IPCC). Assuming the future scenarios outlined by the IPCC, a reduction will occur in the occurrence of climatic favorability of phoma leaf spot in Brazil in both future scenarios (A2 and B2). As with the temporal distribution, the period of greatest risk of phoma leaf spot will tend to diminish in future decades. These planned changes will be larger in the A2 scenario compared to the predicted scenario B2. Despite the decrease in the favorability of phoma leaf spot in the country, some regions still present a potential risk of this disease. Furthermore, the increased frequency of extreme weather was not taken in to account. These will certainly influence the magnitude of potential impacts of climate change on the phoma leaf spot in Brazil.

Antiulcer effects of Ethyl acetate fraction of Carpolobia lutea leaf

Carpolobia lutea leaves (CLL) (Polygalaceae) were earlier screened and the antiulcer ethnomedicinal claim established. This article seeks to quantitatively isolate, elucidate the active compounds from most active CLL fraction. Fractionation was by semi-preparative HPLC; the active fraction was subjected to radical scavenging assays (RSA) and quantification of the total phenolic content (TPC) were also executed. Results: Ethyl acetate fraction (EAF) was observed to be the most pharmacologically active antiulcer fraction when screened using acute ulcer models induced in rodents. The EAF demonstrated significant (p < 0.05-0.001) antiulcer activity in various in vivo induced ulceration models by reducing the ulcer index and increasing the preventive ratio. The EAF demonstrated > 70% in TPC and < 20 % in RSA. Cinnamic and coumaric acids derivatives were isolated from EAF. Cinnamic acids have been implicated and patented as antiulcer agent. Isolated compounds could in part mediate the observed pharmacological activities which lend credence to its ethnobotanical uses.

Thickness dependence of structure and piezoelectric properties at nanoscale of polycrystalline PZT thin films

Lead zirconate titanate Pb(Zr 0.50Ti 0.50)O 3 (PZT) thin films were deposited by a polymeric chemical method on Pt(111)/Ti/SiO2/Si substrates to understand the mechanisms of phase transformations and the effect of film thickness on the structure, dielectric and piezoelectric properties in these films. PZT films pyrolyzed at temperatures higher than 350 °C present a coexistence of pyrochlore and perovskite phases, while only perovskite phase grows in films pyrolyzed at temperatures lower than 300 °C. For pyrochlore-free PZT thin films, a small (100) orientation tendency near the film-substrate interface was observed. Finally, we demonstrate the existence of a self-polarization effect in the studied PZT thin films. Results suggest that Schottky barriers and/or mechanical coupling near the filmsubstrate interface are not primarily responsible for the observed self-polarization effect in our films. © 2012 IEEE.

Fontes e doses de giberelina no desempenho de arroz anão em biotestes

Mutant of dwarf rice (Oryza sativa L.) were treated with three different concentrations of gibberellic acid originated from two sources (Gibberellin and Pro-Gibb) and submitted to the determination of bigger height, in relation to the soil leveI. Mensurations were realized in each seven days at greenhouse conditions under mean temperature of 25°C. lt was concluded that concentrations of 10 mg L-1 of gibberellin originated from Pro-Gibb or Gibberellin was enough to promote a differentiated performance of the test plant. For the study of leaf anatomy Pro-Gibb presented, under all tested concentration, increase of mesophyll thickness in relation to Gibberellin. In this analysis, source and interaction between source and concentration applied promoted significant variations between the mean data.

Correlation between hybrid layer thickness, resin tag length and microtensile bond strength of a self-etching adhesive system

The purpose of this study was to evaluate the correlation between the hybrid layer thickness, resin tag length and resin bond strength of a self-etching adhesive system to sound dentin tissue in vivo. After performing restorative procedures and tooth extractions, ten specimens were sectioned in a mesiodistal direction. One dental section was used for light microscope analysis, in which both the resin tag length and hybrid layer thickness were measured, while the other section was analyzed using a microtensile test (0.5 mm/min). The fractured surface of the latter section was characterized using a stereoscopic magnifying glass (40x magnifcation). The results were subject to statistical analysis using the Pearson Correlation Test (a = 0.05). The hybrid layer thickness, resin tag length and resin bond strength mean values were 2.19 microm (0.34), 4.34 microm (0.28) and 9.73 MPa (5,55), respectively. In addition, correlation tests between the resin tag length and the resin bond strength (r=0.014) and also between the hybrid layer thickness and bond strength (r=0.43), showed no statistically significant correlation. The microtensile bond strength of Adper Prompt L Pop self-etching adhesive system does not depend on hybrid layer thickness or resin tag length.

Queen lipid content and nest growth in the leaf cutting ant (Atta sexdens rubropilosa) (Hymenoptera: Formicidae)

The relationship between the queens' lipid content and nest growth (population size, biomass and nest architecture) was studied from founding up to 1 year. Nests aged 3, 4, 5, 6, 9 and 12 months were dug in the field, and their dimensions were measured. The ant nest population and fungus garden was also collected. The sample was taken to the laboratory where we counted the worker population and weighed the biomass (fungus plus offspring) and queens. Queens were separated for the determination of lipids. The lipid content in the bodies of queens decreased in the first months, then stabilized (at 4-6 months) before increasing in months 9 and 12. Nest biomass (symbiotic fungus and offspring) and worker population increased over time. The structural growth of the nests was observed by excavating around them. Initially nests (3 months old) had one chamber at an average depth of 15 cm. By 1 year, the nests had three or four deep chambers, and were about 3-4 m deep. Our study contributes to knowledge of the dynamics of the energy-reserve expenditure by queens during colony founding and colony development for up to 1 year. © 2013 Copyright Taylor and Francis Group, LLC.

Importance of periodontal ligament thickness

This study evaluated whether periodontal ligament (PL) thickness varied with root size and examined the possible influence of this variation on orthodontic mechanics. Measurements were taken of the maxillary left first molar in 54 male Wistar rats. Mean mesial and distal PL thicknesses were compared between the intermediate buccal and mesiobuccal roots using paired Student's t-tests with a 5% significance level. Mean values differed significantly between roots (p < 2.2 × 10-16). PL thickness in rats is directly proportional to root dimensions.

Leaf anatomical and molecular studies in Bulbophyllum section Micranthae (Orchidaceae) and their implications for systematics

Bulbophyllum section Micranthae comprises 12 species of rupicolous or epiphytic orchids occurring in forests or in open rocky fields in Cerrado/Atlantic Forest ecotones throughout South America. We examined the leaf anatomy of 14 species and compared them with molecular data (nrITS) in phylogenetic analyses. The leaves of Bulbophyllum section Micranthae are characterised by uniseriate epidermis, with periclinal external cell wall thicker than the internal, presence of epicuticular wax, stomata present only on the abaxial surface with suprastomatic chambers, and collateral vascular bundles associated with sclerenchyma fibres. Some of these characters are shared with other rupicolous Orchidaceae species, demonstrating adaptive convergence in xeromorphic habitats. We found some anatomical characteristics with phylogenetic value. Bulbophyllum section Micranthae can be separated into two lineages: those with needle-like leaves, or flat leaves. The analyses show that anatomical characters as well as molecular data may contribute to the development of phylogenetic hypotheses. © 2013 Botanical Society of Sao Paulo.

The relationship between visceral fat thickness and bone mineral density in sedentary obese children and adolescents

Background: Among adults, obesity has been positively related to bone mineral density. However, recent findings have pointed out that abdominal obesity could be negatively related to bone density. The above mentioned relationship is not clear among pediatric populations. Therefore, this cross-sectional study analyzed the relationship between thickness of abdominal adipose tissue and bone mineral variables in sedentary obese children and adolescents.Methods: One hundred and seventy five obese children and adolescents (83 male and 92 female) with ages ranging from 6 to 16 years-old were analyzed. Bone mineral content and density were estimated by dual-energy X-ray absorptiometry and ultrasound equipment which estimated the thickness of the abdominal adipose tissue. Pubertal stage was self-reported by the participants.Results: The mean age was 11.1 (SD = 2.6). Thickness of the abdominal adipose tissue was negatively related to bone mineral density (r = -0.17 [r95%CI: -0.03;-0.32]), independent of gender, pubertal stage and other confounders (β = -0.134 ± 0.042 [β95%CI: -0.217; -0.050]).Conclusions: In sedentary obese children and adolescents abdominal obesity is negatively related to bone mineral density, suggesting a potential link between abdominal obesity and osteoporosis. © 2013 Júnior et al.; licensee BioMed Central Ltd.

Contrasting engineering effects of leaf-rolling caterpillars on a tropical mite community

Ecosystem engineers are organisms that change the physical structure of environments and provide habitats for other organisms. Lepidopteran caterpillars may act as ecosystem engineers by rolling leaves as shelters to complete metamorphosis. After being abandoned, these structures may provide shelter for other organisms. In this study, the influence of leaf-rolling caterpillars on tropical mite communities was reported. Expanded leaves and leaves rolled by larvae and also developed field experiments using leaves rolled manually with different shapes and sizes (i.e. different architectures) in different seasons were surveyed (dry and rainy). While the abundance and diversity of predatory mites were higher in rolled leaves, the abundance of phytophages decreased in these leaves. Species composition differed between rolled and expanded leaves. The structure of shelters affected the distribution of predatory mites, with higher abundances found on funnel-shaped leaves. Predatory mites only benefited from the rolled leaves in the dry season. This is the first study showing (i) the contrasting effects of ecosystem engineers on microarthropod communities, favouring some feeding guilds and inhibiting others; (ii) that the shape of rolled leaves has variable effects on mite communities; and (iii) that facilitation was temporally dependent, i.e. occurred only in the dry season. © 2013 The Royal Entomological Society.