Generation of an UWB monocycle employing cross-phase modulation in a SOA-MZ interferometer

In the present article, an innovative approach for generation of an UWB monocycle is proposed and experimentally demonstrated. The proposed design features the combination of an interferometric device (SOA-Mach Zehnder interferometer) with an optical processor unit. The fusion of such components permits to generate, combine and customize UWB pulses. An optical pulse is used as pump signal and two optical carriers represent and the optical input of the system. The selection of a specific wavelength and therefore of a particular port provides the possibility of modifying the systems output pulse polarity. The capacity of transmitting several data sequence has been also evidenced.

Microfabrication processes for microfluidic devices on a single laser Workstation: direct writing lithography on SU-8, laser ablation on polymers and mask manufacturing

We demonstrate the capability of a laser micromachining workstation for cost-effective manufacturing of a variety of microfluidic devices, including SU-8 microchannels on silicon wafers and 3D complex structures made on polyimide Kapton® or poly carbonate (PC). The workstation combines a KrF excimer laser at 248 nm and a Nd3+:YVO4 DPSS with a frequency tripled at 355 nm with a lens magnification 10X, both lasers working at a pulsed regime with nanoseconds (ns) pulse duration. Workstation also includes a high-resolution motorized XYZ-tilt axis (~ 1 um / axis) and a Through The Lens (TTL) imaging system for a high accurate positioning over a 120 x 120 mm working area. We have surveyed different fabrication techniques: direct writing lithography,mask manufacturing for contact lithography and polymer laser ablation for complex 3D devices, achieving width channels down to 13μ m on 50μ m SU-8 thickness using direct writing lithography, and width channels of 40 μm for polyimide on SiO2 plate. Finally, we have tested the use of some devices for capillary chips measuring the flow speed for liquids with different viscosities. As a result, we have characterized the presence of liquid in the channel by interferometric microscopy.

Comparativa de las medidas de emisiones electromagnéticas en las normativas europea y americana para teléfonos duales

El objetivo del presente Proyecto Fin de Grado es la realización de una comparativa de los resultados obtenidos en las medidas de SAR (tasa de absorción específica) y potencia utilizando la normativa europea CENELEC (basada en la del IEC) y la americana FCC (basada en la del IEEE) para distintos dispositivos móviles duales. En primer lugar se ha realizado el estudio de sus características de potencia y de SAR, viendo la variación que hay con respecto a las distintas normativas y rangos de frecuencias. En algunos casos, aunque funcionan sin problema alguno en las diferentes bandas, la diferencia de niveles de emisiones obtenidos en las diferentes bandas puede ser notable. Como se ha comentado al comienzo, se han utilizado diferentes dispositivos duales y se realizaron en ellos las medidas pertinentes utilizando las diferentes normativas y el procedimiento indicado en cada una de ellas. Para observar las diferencias concretas que pudieran existir al utilizar las diferentes normativas, las medidas se han realizado en todas las bandas de funcionamiento del dispositivo y para cada una de ellas se han aplicado las diferentes normativas. Con esto se pretende evaluar si pudiera existir alguna discrepancia en los dispositivos que tienen el certificado de conformidad para una norma concreta cuando se utiliza en otra banda que no es exactamente la banda de utilización de esa norma. En resumen, se quería comprobar que un dispositivo que está certificado con la norma de una región, por ejemplo Europa (900 y 1800 MHz), también cumple si se utiliza en otra región, por ejemplo América (850 y 1900 MHz). La realización práctica del presente PFG se ha hecho en las instalaciones del Laboratorio de Radiofrecuencia de la Secretaría de Estado de Telecomunicación y para la Sociedad de la Información ubicado en El Casar (Guadalajara). En concreto se utilizó el robot articulado movible DASY4 y el software para su control DASY 52.8, disponible en el “banco de medida de Campos Electromagnéticos (Sala de SAR)”. La duración estimada del presente PFG ha sido aproximadamente de cuatro meses. Para llevar a cabo el presente PFG, se dispuso de todo tipo de material y recursos puestos a disposición por el Ministerio de Industria, Turismo y Comercio en el propio laboratorio, así como de los distintos terminales móviles duales con los que se realizaron las medidas pertinentes. Como bibliografía básica se han utilizado las diferentes normas indicadas anteriormente, es decir la norma europea CENELEC (basada en la del IEC) y la americana FCC (basada en la del IEEE), así como manuales de los equipos implicados en el bando de medida de SAR: analizadores de redes, robot articulado y software de control, así como el resto de dispositivos utilizados en las medidas. ABSTRACT. The goal of this Final Degree Project is to perform a comparison of the results obtained in SAR measurements (specific absorption rate) and power using the European standards CENELEC (based on IEC Regulation) and the American FCC (based on IEEE Regulation) to different mobile dual devices. If first place it was made the study of its power and SAR features, seeing that there is shift with respect to the different standards and frequency ranges. In some cases, although they work without any problem in different bands, the difference in levels of emissions obtained in the different bands can be significant. As mentioned at the beginning, different dual devices were used and relevant measurements were taken from them using the different standards and the procedure in each one of them. To see the specific differences that may exist when using the different standards, the measurements were made in all bands of the device operation and to each one it has been applied in the different standards. This attempted to assess whether there could be some discrepancy in the devices that have the certificate of compliance to a specify standard when used in another band that is not exactly the used band of this standard. To sum up, it was required to verify that a device which is certified to the standard of a region, for example (900 and 1800 MHz), also verifies if it is used in another region, for example America (850 and 1900 MHz). The practical realization of this Final Degree Project was made in the facilities of the Radio Frequency Laboratory of the Ministry of State for Telecommunications and the Information Society located in El Casar (Guadalajara). Specifically, the movable articulated robot DASY4 was used and the control software DASY 52.8, available in the “Measure Electromagnetic Field testbench (SAR room)”. The duration of this Final Degree Project has benn about four months. To carry out the present project, all kinds of materials and resources were provided by the Ministry of Industry, Tourism and Trade in its own laboratory, as well as the different mobile dual terminals with which relevant measurements were made. As basic references the different standards indicated above has been used, that is to say the European standard CENELEC (based on IEC standard) and the American FCC (based on IEEE standard), as well as the equipment manuals involved in the SAR measure testbench: network analyzers, articulated robot and control software, as well as the rest of the devices used in the measurements.

Arrays de sensores interferométricos recirculantes de fibra óptica

Two discrete interferometric sensors' arrays have been analysed from time división multiplexing of recirculating crossed loop structures based on singlemode optical fiber. Intensity impulsive responses for both arrays have been obtained and compared under different design considerations, calculating Ihe system coupling constants, signial to interference noise ratio, input pulse repetition rate and duty cycle for each case. First experimental results are shown in this paper and very simple temperature and pressure sensing applicalions are suggested from here.

Expresión de la resistencia en plantas de tomate a nematodos formadores de nódulos (Meloidogyne javanica)

La resistencia genética mediada por los genes R es uno de los sistemas de defensa de las plantas frente a patógenos y se activa una vez que los patógenos han superado la defensa basal que otorgan la cutícula y pared celular. Los mecanismos de resistencia genética se inician a su vez, por el reconocimiento de productos derivados de genes de avirulencia de los patógenos (avr) por parte de las proteínas R. Tanto la respuesta de defensa basal como la respuesta de defensa por genes R están influenciadas por patrones de regulación hormonal, que incluye a las principales hormonas vegetales ácido salicílico (SA), ácido jasmónico (JA) y etileno (ET). En tomate (Solanum lycopersicum) uno de los genes R es el gen MiG1, que confiere resistencia a nematodos formadores de nódulos (Meloidogyne javanica, M. incognita y M. arenaria). Uno de los eventos más importantes que caracterizan a la respuesta de resistencia es la reacción hipersensible (HR), que está mediada por la activación temprana de una serie de sistemas enzimáticos, entre los que destaca el de las peroxidasas (PRXs) Clase III. Su función es importante tanto para limitar el establecimiento y expansión del nematodo, al generar ambientes altamente tóxicos por su contribución en la producción masiva de ROS, como por su implicación en la síntesis y depósito de lignina generando barreras estructurales en el sitio de infección. Además de estos mecanismos de defensa asociados a la resistencia constitutiva, las plantas pueden desarrollar resistencia sistémica adquirida (SAR) que en la naturaleza ocurre, en ocasiones, en una fase posterior a que la planta haya sufrido el ataque de un patógeno. Así mismo hay diferentes productos de origen químico como el benzotiadiazol o BTH (ácido S-metil benzol-(1,2,3)-tiadiozole-7-carbónico ester) que pueden generar esta misma respuesta SAR. Como resultado, la planta adquiere resistencia sistémica frente a nuevos ataques de patógenos. En este contexto, el presente trabajo aborda en primer lugar el análisis comparativo, mediante microarrays de oligonucleótidos, de los transcriptomas de los sistemas radicales de plantas de tomate de 8 semanas de edad de dos variedades, una portadora del gen de resistencia MiG1 (Motelle) y otra carente del mismo y, por tanto, susceptible (Moneymaker), antes y después de la infección por M. javanica. Previo a la infección se observó que la expresión de un gran número de transcritos era más acusada en la variedad resistente que en la susceptible, entre ellos el propio gen MiG1 o los genes PrG1 (o P4), LEJA1 y ER24, lo que indica que, en ausencia de infección, las rutas hormonales del SA, JA y ET están más activas en la raíz de la variedad resistente. Por el contrario, un número mucho menor de transcritos presentaban su expresión más reducida en Motelle que en Moneymaker, destacando un gen de señalización para sintetizar la hormona giberelina (GA). La infección por M. javanica causa importantes cambios transcripcionales en todo el sistema radical que modifican sustancialmente las diferencias basales entre plantas Motelle y Moneymaker, incluida la sobreexpresión en la variedad resistente de los transcritos de MiG1, que se reduce parcialmente, mientras que las rutas hormonales del SA y el JA continuan más activas que en la susceptible (evidente por los genes PrG1 y LEJA1). Además, los cambios asociados a la infección del nematodo se evidencian por las grandes diferencias entre los dos tiempos post-infección considerados, de tal forma que en la fase temprana (2 dpi) de la interacción compatible predomina la sobreexpresión de genes de pared celular y en la tardía (12 dpi) los relacionados con el ARN. En el análisis de la interacción incompatible, aunque también hay muchas diferencias entre ambas fases, hay que destacar la expresión diferencial común de los genes loxA y mcpi (sobrexpresados) y del gen loxD (reprimido) por su implicación en defensa en otras interacciones planta-patógeno. Cabe destacar que entre las interacciones compatible e incompatible hubo muy pocos genes en común. En la etapa temprana de la interacción compatible destacó la activación de genes de pared celular y la represión de la señalización; en cambio, en la interacción incompatible hubo proteínas principalmente implicadas en defensa. A los 12 días, en la interacción compatible los genes relacionados con el ARN y la pared celular se sobreexpresaban principalmente, y se reprimían los de proteínas y transporte, mientras que en la incompatible se sobreexpresaron los relacionados con el estrés, el metabolismo secundario y el de hormonas y se reprimieron los de ARN, señalización, metabolismo de hormonas y proteínas. Por otra parte, la técnica de silenciamiento génico VIGS reveló que el gen TGA 1a está implicado en la resistencia mediada por el gen MiG1a M. javanica. Así mismo se evaluó el transcriptoma de todo el sistema radical de la variedad susceptible tras la aplicación del inductor BTH, y se comparó con el transcriptoma de la resistente. Los resultados obtenidos revelan que el tratamiento con BTH en hojas de Moneymaker ejerce notables cambios transcripcionales en la raíz; entre otros, la activación de factores de transcripción Myb (THM16 y THM 27) y del gen ACC oxidasa. Las respuestas inducidas por el BTH parecen ser de corta duración ya que no hubo transcritos diferenciales comunes a las dos fases temporales de la infección comparadas (2 y 12 dpi). El transcriptoma de Moneymaker tratada con BTH resultó ser muy diferente al de la variedad resistente Motelle, ambas sin infectar, destacando la mayor expresión en el primero del gen LeEXP2, una expansina relacionada con defensa frente a nematodos. Las respuestas inducidas por los nematodos en Moneymaker-BTH también fueron muy distintas a las observadas previamente en la interacción incompatible mediada por MiG1, pues sólo se detectaron 2 genes sobreexpresados comunes a ambos eventos. Finalmente, se abordó el estudio de la expresión diferencial de genes que codifican PRXs y su relación con la resistencia en la interacción tomate/M. javanica. Para ello, se realizó en primer lugar el estudio del análisis del transcriptoma de tomate de la interacción compatible, obtenido en un estudio previo a partir de tejido radical infectado en distintos tiempos de infección. Se han identificado 16 unigenes de PRXs con expresión diferencial de los cuales 15 se relacionan por primera vez con la respuesta a la infección de nematodos. La mayoría de los genes de PRXs identificados, 11, aparecen fuertemente reprimidos en el sitio de alimentación, en las células gigantes (CG). Dada la implicación directa de las PRXs en la activación del mecanismo de producción de ROS, la supresión de la expresión génica local de genes de PRXs en el sitio de establecimiento y alimentación pone de manifiesto la capacidad del nematodo para modular y superar la respuesta de defensa de la planta de tomate en la interacción compatible. Posteriormente, de estos genes identificados se han elegido 4: SGN-U143455, SGN-U143841 y SGN-U144042 reprimidos en el sitio de infección y SGN-U144671 inducido, cuyos cambios de expresión se han determinado mediante análisis por qRT-PCR y de hibridación in situ en dos tiempos de infección (2 dpi y 4 dpi) y en distintos tejidos radicales de tomate resistente y susceptible. Los patrones de expresión obtenidos demuestran que en la interacción incompatible la transcripción global de los 4 genes estudiados se dispara en la etapa más temprana en el sitio de infección, detectándose la localización in situ de transcritos en el citoplasma de las células corticales de la zona meristemática afectadas por el nematodo. A 4 dpi se observó que los niveles de expresión en el sitio de infección cambian de tendencia y los genes SGN-U144671 y SGN-U144042 se reprimen significativamente. Los diferentes perfiles de expresión de los genes PRXs en los dos tiempos de infección sugieren que su inducción en las primeras 48 horas es crucial para la respuesta de defensa relacionada con la resistencia frente a la invasión del nematodo. Por último, al analizar el tejido radical sistémico, se detectó una inducción significativa de la expresión en la fase más tardía de la infección del gen SGN-U144042 en el genotipo susceptible y del SGN-U143841 en ambos genotipos. En este estudio se describe por primera vez la inducción de la expresión sistémica de genes de PRXs en tomate durante la interacción compatible e incompatible con M. javanica lo que sugiere su posible implicación funcional en la respuesta de defensa SAR activada por la infección previa del nematodo. ABSTRACT Plants defend themselves from pathogens by constitutive and/or induced defenses. A common type of induced defense involves plant resistance genes (R), which are normally activated in response to attack by specific pathogen species. Typically, a specific plant R protein recognizes a specific pathogen avirulence (avr) compound. This initiates a complex biochemical cascade inside the plant that results in synthesis of antipathogen compounds. This response can involve chemical signaling, transcription, translation, enzymes and metabolism, and numerous plant hormones such as salicylic acid (SA), jasmonates (JA) and ethylene (ET). Induced plant defense can also activate Class III peroxidases (PRXs), which produce reactive oxygen species (ROS), regulate extracellular H2O2, and play additional roles in plant defense. R-gene activation and the resulting induced defense often remain localized in the specific tissues invaded by the plant pathogen. In other cases, the plant responds by signaling the entire plant to produce defense compounds (systemic induction). Plant defense can also be induced by the exogenous application of natural or synthetic elicitors, such as benzol-(1,2,3)-thiadiazole-7-carbothionic acid. There is much current scientific interest in R-genes and elicitors, because they might be manipulated to increase agricultural yield. Scientists also are interested in systemic induction, because this allows the entire plant to be defended. In this context, one of the aims of this investigation was the transcriptoma analysis of the root systems of two varieties of tomato, the resistant variety (Motelle) that carrier MiG1 and the susceptible (Moneymaker) without MiG1, before and after infection with M. javanica. The overexpression was more pronounced in the transcriptoma of the resistant variety compared with susceptible, before infection, including the MiG1 gene, PrG1 (or P4) genes, LEJA1 and ER24, indicating that hormone SA, JA and ET are active in the resistant variety. Moreover, GA hormone presents an opposite behavior. M. javanica infection causes significant transcriptional changes in both compatible (Moneymaker-M. javanica) and incompatible (Motelle-M. javanica) interaction. In the incompatible transcriptome root system, was notably reduced the expression of the MiG1 gene, and a continuity in the expression of the hormonal pathways of SA and JA. In other hand, transcriptional profile changes during compatible interaction were associated with nematode infection. The large differences between the two times point infection considered (2 dpi and 12 dpi) indicates an overexpression of cell wall related genes in the first phase, and conversely an overexpression of RNA genes in the late phase. Transcriptoma analysis of incompatible interaction, although there were differences between the two phases, should be highlighted the common differential gene expression: loxA and mcpi (overexpressed) and loxD gene (suppressed), as they are involved in defenses in other plant-pathogen interactions. The VIGS tool has provided evidence that TGA 1a is involved in MiG1 mediated resistance to M. javanica. Likewise, the systemic application of BTH was assessed and compared with susceptible and resistant variety. Root system transcriptoma of BTH treatment on leaves showed the activation of Myb transcription factors (THM16 and THM27), the ACC oxidase gene. and the LeEXP2 gene, encoding for an expansin enzyme, related with defense against nematodes. The activation appears to be reduced by subsequent infection and establishment of nematodes. To assist in elucidate the role of tomato PRXs in plant defence against M. javanica, the transcriptome obtained previously from isolated giant cells (GC) and galls at 3 and 7 dpi from the compatible interaction was analysed. A total of 18 different probes corresponding to 16 PRX encoding genes were differentially expressed in infection site compared to the control uninfected root tissues. Most part of them (11) was down-regulated. These results yielded a first insight on 15 of the PRX genes responding to tomato–Meloidogyne interaction and confirm that repression of PRX genes might be crucial for feeding site formation at the initial stages of infection. To study the involvement of PRX genes in resistance response, four genes have been selected: SGN-U143455, SGN-U143841 and SGN-U144042 consistently down-regulated and SGN-U144671 consistently up-regulated at infection site in compatible interaction. The expression changes were determined by qRT-PCR and in situ location at 2 dpi and 4 dpi, and in different root tissues of resistant and susceptible plants. Early upon infection (2 dpi), the transcripts levels of the four genes were strongly increased in infected tissue of resistant genotype. In situ hybridization showed transcript accumulation of them in meristem cortical cells, where the nematode made injury. The results obtained provide strong evidence that early induction of PRX genes is important for defence response of the resistance against nematode invasion. Moreover, the induction patterns of SGN-U144042 gene observed at 4 dpi in distal noninfected root tissue into the susceptible genotype and of SGN-U143841 gene in both genotypes suggest a potential involvement of PRX in the systemic defence response.

Selectively filled photonic liquid crystal fibers = Fibras de cristal fotónico selectivamente llenas con cristal líquido

El presente trabajo de Tesis se ha centrado en el diseño, fabricación y caracterización de dispositivos basados en fibras de cristal fotónico infiltrado selectivamente con cristales líquidos, polímeros y una mezcla de ambos. Todos los dispositivos son sintonizables, y su área de aplicación se centra en comunicaciones ópticas y sensores. La manipulación y fusionado de fibras fotónicas, el llenado selectivo de determinadas cavidades y la alineación recíproca de fibras mantenedoras de polarización son tareas muy específicas y delicadas para las que se requieren protocolos muy estrictos. Previo a la fabricación de dispositivos ha sido necesaria por tanto una tarea de sistematización y creación de protocolos de fabricación. Una vez establecidos se ha procedido a la fabricación y caracterización de dispositivos. Los dispositivos fabricados se enumeran a continuación para posteriormente detallar una a una las singularidades de cada uno. • Interferómetros intermodales hechos a partir de una porción de fibra fotónica soldada entre dos fibras estándar, bien monomodo o PANDA (mantenedora de polarización). Estos interferómetros han sido sumergidos o bien llenados selectivamente con cristales líquidos para así sintonizar la señal interferométrica guiada a través de la fibra. • Infiltración de fibras fotónicas con cristales líquidos colestéricos con especial énfasis en la fase azul (blue phase) de estos materiales. Las moléculas de cristal líquido se autoalinean en volumen por lo que la infiltración de fibras fotónicas con estos cristales líquidos es muy interesante, pues es conocida la dificultad de alinear apropiadamente cristales líquidos dentro de cavidades micrométricas de las fibras fotónicas. • Grabación de redes holográficas de forma selectiva en las cavidades de una fibra fotónica. Estas redes holográficas, llamadas POLICRYPS (POlymer-LIquid CRYstal-Polymer Slices), son redes fabricadas a base de franjas de polímero y cristal líquido alineado perpendicularmente a dichas franjas. Las franjas son a su vez perpendiculares al eje de la fibra como lo puede ser una red de Bragg convencional. El cristal líquido, al estar alineado perpendicularmente a dichos franjas y paralelo al eje de la fibra, se puede conmutar aplicando un campo eléctrico externo, modificando así el índice efectivo de la red. Se puede fabricar por lo tanto una red de Bragg sintonizable en fibra, muy útil en comunicaciones ópticas. • Llenado selectivo de fibras fotónicas con polidimetilsiloxano (PDMS), un polímero de tipo silicona. Si se realiza un llenado selectivo asimétrico se puede inducir birrefringencia en la fibra. El índice de refracción del PDMS tiene una fuerte dependencia térmica, por lo que se puede sintonizar la birrefringencia de la fibra. • Estudio teórico de llenado selectivo de fibras fotónicas con PDMS dopado con nanopartículas de plata de 5, 40 y 80 nm. Estas nanopartículas poseen un pico de absorción en torno a los 450 nm debido a resonancias superficiales localizadas de plasmones (LSPR). La resonancia del plasmon tiene una fuerte dependencia con el índice de refracción del material colindante, y al ser éste PDMS, la variación de índice de refracción se ve amplificada, obteniendo una absorción sintonizable. Se ha propuesto la fabricación de polarizadores sintonizables usando esta técnica. Como ya se ha dicho, previamente a la fabricación ha sido necesaria la protocolización de diversos procedimientos de fabricación de alta complejidad, así como protocolizar el proceso de toma de medidas para optimizar los resultados. Los procedimientos que han requerido la formulación de protocolos específicos han sido los siguientes: • Llenado selectivo de cavidades en una fibra fotónica. Dichas fibras tienen generalmente un diámetro externo de 125 μm, y sus cavidades son de entre 5 y 10 μm de diámetro. Se han desarrollado tres técnicas diferentes para el llenado/bloqueado selectivo, pudiéndose combinar varios protocolos para la optimización del proceso. Las técnicas son las siguientes: o Llenado y bloqueado con un prepolímero. Dicho prepolímero, también llamado adhesivo óptico, está inicialmente en estado líquido y posee una cierta viscosidad. Las cavidades de la fibra fotónica que se desea llenar o bloquear poseen un diámetro diferente al resto, por lo que en el proceso de llenado aparecen dos frentes de llenado dependientes de su diámetro. A mayor diámetro, mayor velocidad de llenado. Polimerizando cuando existe dicha diferencia en los frentes se puede cortar por medio, obteniendo así una fibra parcialmente bloqueada. o Colapsamiento de las cavidades de menor diámetro mediante aplicación de calor. El calor producido por un arco voltaico de una soldadora de fibra estándar fusiona el material exterior de la fibra produciendo el colapsamiento de las cavidades de menor diámetro. En esta técnica también es necesaria una diferencia de diámetros en las cavidades de la fibra. o Bloqueo una a una de las cavidades de la fibra fotónica con adhesivo óptico. Este procedimiento es muy laborioso y requiere mucha precisión. Con este sistema se pueden bloquear las cavidades deseadas de una fibra sin importar su diámetro. • Alineación de una fuente de luz linealmente polarizada con una fibra mantenedora de polarización ya sea PANDA o fotónica. Así mismo también se han alineado entre sí fibras mantenedoras de polarización, para que sus ejes rápidos se fusionen paralelos y así el estado de polarización de la luz guiada se mantenga. • Sistematización de toma de medidas para caracterizar los interferómetros modales. Éstos son altamente sensibles a diversas variables por lo que el proceso de medida es complejo. Se deben aislar variables de forma estrictamente controlada. Aunque todos los dispositivos tienen en común el llenado selectivo de cavidades en una fibra fotónica cada dispositivo tiene sus peculiaridades, que van a ser explicadas a continuación. ABSTRACT The present Thesis has been centered in the design, fabrication and characterization of devices based on photonic crystal fibers selectively filled with liquid crystals, polymers and a mixture of both. All devices are tunable and their work field is optical communications and sensing The handling and splicing of photonic crystal fibers, the selective filling of their holes and the aligning of polarization maintaining fibers are very specific and delicate tasks for which very strict protocols are required. Before the fabrication of devices has therefore been necessary task systematization and creation of manufacturing protocols. Once established we have proceeded to the fabrication and characterization of devices. The fabricated devices are listed below and their peculiarities are detailed one by one: • Intermodal interferometers made with a portion of photonic crystal fiber spliced between two optical communication fiber pigtails, either single mode or PANDA (polarization-maintaining) fiber. These interferometers have been submerged or selectively filled with liquid crystals to tune the interferometric guided signal. • Infiltration of photonic fibers with cholesteric liquid crystals with special emphasis on their blue phase (blue phase). The liquid crystal molecules are self-aligning in volume so the infiltration of photonic fibers with these liquid crystals is very interesting. It is notoriously difficult to properly align liquid crystals within micron cavities such as photonic fibers. • Selectively recording of holographic gratings in the holes of photonic crystal fibers. These holographic gratings, called POLICRYPS (POlymer-LIquid CRYstal-Polymes Slices), are based on walls made of polymer and liquid crystal aligned perpendicular to them. These walls are perpendicular to the axis of the fiber as it can be a conventional Bragg grating. The liquid crystal is aligned perpendicular to the walls and parallel to the fiber axis, and can be switched by applying an external electric field and thus change the effective index of the grating. It is thus possible to manufacture a tunable Bragg grating fiber, useful in optical communications. •Asymmetrically selective filling of photonic crystal fibers with a silicone polymer like called polydimethylsiloxane (PDMS) to induce birefringence in the fiber. The refractive index of PDMS has temperature dependence, so that the birefringence of the fiber can be tuned. • Theoretical study of photonic crystal fibers selectively filled with PDMS doped with silver nanoparticles of 5, 40 and 80 nm. These nanoparticles have an absorption peak around 450 nm due to localized surface plasmon resonances (LSPR). Plasmon resonance has a strong dependence on the refractive index of the adjacent material, and as this is PDMS, the refractive index variation is amplified, obtaining a tunable absorption. Fabrication of tunable polarizers using this technique has been proposed. Before starting the fabrication, it has been necessary to optimize several very delicate procedures and different protocols have been designed. The most delicate procedures are as follows: • Selective filling of holes in a photonic crystal fiber. These fibers generally have an outer diameter of 125 μm, and their holes have a diameter around between 5 and 10 μm. It has been developed three different techniques for filling / selective blocking, and they can be combined for process optimization. The techniques are: o Filling and blocked with a prepolymer. This prepolymer also called optical adhesive is initially in liquid state and has a certain viscosity. The holes of the photonic crystal fiber that are desired to be filled or blocked should have a different diameter, so that in the filling process appear two different fronts depending on the hole diameter. The holes with larger diameter are filled faster. Then the adhesive is polymerized when there is such a difference on the front. A partially blocked fiber is obtained cutting between fronts. o Collapsing of holes of smaller diameter by application of heat. The heat produced by an arc of a standard fusion splicer fuses the outer fiber material producing the collapsing of the cavities of smaller diameter. In this technique also you need a difference of diameters in the fiber holes. o Blocking one by one the holes of photonic crystal fiber with optical adhesive. This procedure is very laborious and requires great precision. This system can block unwanted cavities regardless fiber diameter. • Aligning a linearly polarized light source with a polarization-maintaining fiber (either a PANDA fiber as a photonic crystal fiber). It is needed also an aligning between polarization-maintaining fibers, so that their fast axes parallel merge and that is state of polarization of light guided is maintained. • Systematization of taking measurements to characterize the modal interferometers. These are highly sensitive to several variables so the measurement process is very complicated. Variables must be fixed in a very controlled manner. Although all devices have the common characteristic of being selectively filled PCFs with some kind of material, each one has his own peculiarities, which are explained below.

Caracterización geométrica y lumínica de los atrios incorporados en los edificios de Santiago de Chile

El atrio incorporado en los edificios ha sido un recurso espacial que tempranamente se difundió a nivel global, siendo adoptado por las distintas arquitecturas locales en gran parte del mundo. Su masificación estuvo favorecida primero por la rápida evolución de la tecnología del acero y el vidrio, a partir del siglo XIX, y en segundo termino por el posterior desarrollo del hormigón armado. Otro aspecto que explica tal aceptación en la arquitectura contemporánea, es de orden social y radica en la llamativa cavidad del espacio describiendo grandes dimensiones y favoreciendo con ello, el desarrollo de una multiplicidad de usos en su interior que antes eran impensados. Al interior del atrio, la luz natural es clave en las múltiples vivencias que alberga y sea tal vez la condición ambiental más valorada, ya que entrega una sensación de bienestar al conectarnos visualmente con el ambiente natural. Por esta razón de acuerdo al método hipotético deductivo, se evaluaron los efectos de la configuración geométrica, la cubierta y la orientación en el desempeño de la iluminación natural en la planta baja, a partir un modelo extraído desde el inventario de los edificios atrio construidos en Santiago de Chile, en los últimos 30 años que fue desarrollado en el capitulo 2. El análisis cuantitativo de los edificios inventariados se elaboró en el capítulo 3, considerando las dimensiones de los atrios. Simultáneamente fueron clasificados los aspectos constructivos, los materiales y las características del ambiente interior de cada edificio. En esta etapa además, fueron identificadas las variables de estudio de las proporciones geométricas de la cavidad del atrio con los coeficientes de aspecto de las proporciones, en planta (PAR), en corte (SAR) y de la cavidad según (WI), (AR) y (RI). Del análisis de todos estos parámetros se extrajo el modelo de prueba. El enfoque del estudio del capítulo 4 fue la iluminación natural, se revisaron los conceptos y el comportamiento en el atrio, a partir de un modelo físico construido a escala para registro de la iluminancia bajo cielo soleado de la ciudad. Más adelante se construyó el modelo en ambiente virtual, relacionando las variables determinadas por la geometría de la cavidad y el cerramiento superior; examinándose de esta manera distintas transparencias, proporciones de apertura, en definitiva se evaluó un progresivo cerramiento de las aberturas, verificando el ingreso de la luz y disponibilidad a nivel de piso con la finalidad, de proveer lineamientos útiles en una primera etapa del diseño arquitectónico. Para el análisis de la iluminación natural se revisaron diferentes métodos de cálculo con el propósito de evaluar los niveles de iluminancia en un plano horizontal al interior del atrio. El primero de ellos fue el Factor de Luz Día (FLD) que corresponde, a la proporción de la iluminancia en un punto de evaluación interior respecto, la cantidad proveniente del exterior bajo cielo nublado, a partir de la cual se obtuvo resultados que revelaron la alta luminosidad del cielo nublado de la ciudad. Además fueron evaluadas las recientes métricas dinámicas que dan cuenta, de la cantidad de horas en las cuales de acuerdo a los extensos registros meteorológico de la ciudad, permitieron obtener el porcentajes de horas dentro de las cuales se cumplió el estándar de iluminancia requerido, llamado autonomía lumínica (DA) o mejor aún se permanece dentro de un rango de comodidad visual en el interior del atrio referido a la iluminancia diurna útil (UDI). En el Capítulo 5 se exponen los criterios aplicados al modelo de estudio y cada una de las variantes de análisis, además se profundizó en los antecedentes y procedencia de las fuentes de los registros climáticos utilizados en las simulaciones llevadas a cabo en el programa Daysim operado por Radiance. Que permitieron evaluar el desempeño lumínico y la precisión, de cada uno de los resultados para comprobar la disponibilidad de iluminación natural a través de una matriz. En una etapa posterior se discutieron los resultados, mediante la comparación de los datos logrados según cada una de las metodologías de simulación aplicada. Finalmente se expusieron las conclusiones y futuras lineas de trabajo, las primeras respecto el dominio del atrio de cuatro caras, la incidencia del control de cerramiento de la cubierta y la relación establecida con la altura; indicando en lo específico que las mediciones de iluminancia bajo el cielo soleado de verano, permitieron aclarar, el uso de la herramienta de simulación y método basado en el clima local, que debido a su reciente desarrollo, orienta a futuras líneas de trabajo profundizando en la evaluación dinámica de la iluminancia contrastado con monitorización de casos. ABSTRACT Atriums incorporated into buildings have been a spatial resource that quickly spread throughout the globe, being adopted by several local architecture methods in several places. Their widespread increase was highly favored, in the first place, with the rapid evolution of steel and glass technologies since the nineteen century, and, in second place, by the following development of reinforced concrete. Another issue that explains this success into contemporary architecture is associated with the social approach, and it resides in the impressive cavity that describes vast dimensions, allowing the development of multiple uses in its interior that had never been considered before. Inside the atrium, daylight it is a key element in the many experiences that involves and it is possibly the most relevant environmental factor, since it radiates a feeling of well-being by uniting us visually with the natural environment. It is because of this reason that, following the hypothetical deductive method, the effects in the performance of daylight on the floor plan were evaluated considering the geometric configuration, the deck and orientation factors. This study was based in a model withdrawn from the inventory of atrium buildings that were constructed in Santiago de Chile during the past thirty years, which will be explained later in chapter 2. The quantitative analysis of the inventory of those buildings was elaborated in chapter 3, considering the dimensions of the atriums. Simultaneously, several features such as construction aspects, materials and environmental qualities were identified inside of each building. At this stage, it were identified the variables of the geometric proportions of the atrium’s cavity with the plan aspect ratio of proportions in first plan (PAR), in section (SAR) and cavity according to well index (WI), aspect ratio (AR) and room index (RI). An experimental model was obtained from the analysis of all the mentioned parameters. The main focus of the study developed in chapter 4 is daylight. The atrium’s concept and behavior were analyzed from a physical model built under scale to register the illuminances under clear, sunny sky of the city. Later on, this physical model was built in a virtual environment, connecting the variables determined by the geometry of the cavity and the superior enclosure, allowing the examination of transparencies and opening proportions. To summarize, this stage consisted on evaluating a progressive enclosure of the openings, checking the access of natural light and its availability at the atrium floor, in an effort to provide useful guidelines during the first stage of the architectural design. For the analysis of natural lighting, several calculations methods were used in order to determine the levels of illuminances in a horizontal plane inside of the atrium. The first of these methods is the Daylight Factor (DF), which consists in the proportion of light in an evaluation interior place with the amount of light coming from the outside in a cloudy day. Results determined that the cloudy sky of the city has high levels of luminosity. In addition, the recent dynamic metrics were evaluated which reflects the hours quantity. According to the meteorological records of the city’s climate, the standard of illuminance- a standard measure called Daylight Autonomy (DA) – was met. This is even better when the results stay in the line of visual convenience within the atrium, which is referred to as Useful Daylight Illuminance (UDI). In chapter 5, it was presented the criteria applied to the study model and on each of the variants of the analysis. Moreover, the information of the climate records used for the simulations - carried out in the Daysim program managed by Radiance – are detailed. These simulations allowed the observation of the daylight performance and the accuracy of each of the results to confirm the availability of natural light through a matrix. In a later stage, the results were discussed comparing the collected data in each of the methods of simulation used. Finally, conclusions and further discussion are presented. Overall, the four side atrium’s domain and the effect of the control of the cover’s enclosure. Specifically, the measurements of the daylight under summer’s clear, sunny sky allowing clarifying the use of the simulation tool and the method based on the local climate. This method allows defining new and future lines of work deepening on the dynamic of the light in contrast with the monitoring of the cases.

Enhancement of induced disease resistance by simultaneous activation of salicylate- and jasmonate-dependent defense pathways in Arabidopsis thaliana

The plant-signaling molecules salicylic acid (SA) and jasmonic acid (JA) play an important role in induced disease resistance pathways. Cross-talk between SA- and JA-dependent pathways can result in inhibition of JA-mediated defense responses. We investigated possible antagonistic interactions between the SA-dependent systemic acquired resistance (SAR) pathway, which is induced upon pathogen infection, and the JA-dependent induced systemic resistance (ISR) pathway, which is triggered by nonpathogenic Pseudomonas rhizobacteria. In Arabidopsis thaliana, SAR and ISR are effective against a broad spectrum of pathogens, including the foliar pathogen Pseudomonas syringae pv. tomato (Pst). Simultaneous activation of SAR and ISR resulted in an additive effect on the level of induced protection against Pst. In Arabidopsis genotypes that are blocked in either SAR or ISR, this additive effect was not evident. Moreover, induction of ISR did not affect the expression of the SAR marker gene PR-1 in plants expressing SAR. Together, these observations demonstrate that the SAR and the ISR pathway are compatible and that there is no significant cross-talk between these pathways. SAR and ISR both require the key regulatory protein NPR1. Plants expressing both types of induced resistance did not show elevated Npr1 transcript levels, indicating that the constitutive level of NPR1 is sufficient to facilitate simultaneous expression of SAR and ISR. These results suggest that the enhanced level of protection is established through parallel activation of complementary, NPR1-dependent defense responses that are both active against Pst. Therefore, combining SAR and ISR provides an attractive tool for the improvement of disease control.

Generation and reproductive phenotypes of mice lacking estrogen receptor β

Estrogens influence the differentiation and maintenance of reproductive tissues and affect lipid metabolism and bone remodeling. Two estrogen receptors (ERs) have been identified to date, ERα and ERβ. We previously generated and studied knockout mice lacking estrogen receptor α and reported severe reproductive and behavioral phenotypes including complete infertility of both male and female mice and absence of breast tissue development. Here we describe the generation of mice lacking estrogen receptor β (ERβ −/−) by insertion of a neomycin resistance gene into exon 3 of the coding gene by using homologous recombination in embryonic stem cells. Mice lacking this receptor develop normally and are indistinguishable grossly and histologically as young adults from their littermates. RNA analysis and immunocytochemistry show that tissues from ERβ −/− mice lack normal ERβ RNA and protein. Breeding experiments with young, sexually mature females show that they are fertile and exhibit normal sexual behavior, but have fewer and smaller litters than wild-type mice. Superovulation experiments indicate that this reduction in fertility is the result of reduced ovarian efficiency. The mutant females have normal breast development and lactate normally. Young, sexually mature male mice show no overt abnormalities and reproduce normally. Older mutant males display signs of prostate and bladder hyperplasia. Our results indicate that ERβ is essential for normal ovulation efficiency but is not essential for female or male sexual differentiation, fertility, or lactation. Future experiments are required to determine the role of ERβ in bone and cardiovascular homeostasis.

Crystal structure of the SarR protein from Staphylococcus aureus

The expression of virulence determinants in Staphylococcus aureus is controlled by global regulatory loci (e.g., sarA and agr). The sar (Staphylococcus accessory regulator) locus is composed of three overlapping transcripts (sarA P1, P3, and P2, transcripts initiated from the P1, P3, and P2 promoters, respectively), all encoding the 124-aa SarA protein. The level of SarA, the major regulatory protein, is partially controlled by the differential activation of the sarA promoters. We previously partially purified a 13.6-kDa protein, designated SarR, that binds to the sarA promoter region to down-modulate sarA transcription from the P1 promoter and subsequently SarA expression. SarR shares sequence similarity to SarA, and another SarA homolog, SarS. Here we report the 2.3 Å-resolution x-ray crystal structure of the dimeric SarR-MBP (maltose binding protein) fusion protein. The structure reveals that the SarR protein not only has a classic helix–turn–helix module for DNA binding at the major grooves, but also has an additional loop region involved in DNA recognition at the minor grooves. This interaction mode could represent a new functional class of the “winged helix” family. The dimeric SarR structure could accommodate an unusually long stretch of ≈27 nucleotides with two or four bending points along the course, which could lead to the bending of DNA by 90° or more, similar to that seen in the catabolite activator protein (CAP)–DNA complex. The structure also demonstrates the molecular basis for the stable dimerization of the SarR monomers and possible motifs for interaction with other proteins.

Structure-activity relationships derived by machine learning: the use of atoms and their bond connectivities to predict mutagenicity by inductive logic programming.

We present a general approach to forming structure-activity relationships (SARs). This approach is based on representing chemical structure by atoms and their bond connectivities in combination with the inductive logic programming (ILP) algorithm PROGOL. Existing SAR methods describe chemical structure by using attributes which are general properties of an object. It is not possible to map chemical structure directly to attribute-based descriptions, as such descriptions have no internal organization. A more natural and general way to describe chemical structure is to use a relational description, where the internal construction of the description maps that of the object described. Our atom and bond connectivities representation is a relational description. ILP algorithms can form SARs with relational descriptions. We have tested the relational approach by investigating the SARs of 230 aromatic and heteroaromatic nitro compounds. These compounds had been split previously into two subsets, 188 compounds that were amenable to regression and 42 that were not. For the 188 compounds, a SAR was found that was as accurate as the best statistical or neural network-generated SARs. The PROGOL SAR has the advantages that it did not need the use of any indicator variables handcrafted by an expert, and the generated rules were easily comprehensible. For the 42 compounds, PROGOL formed a SAR that was significantly (P < 0.025) more accurate than linear regression, quadratic regression, and back-propagation. This SAR is based on an automatically generated structural alert for mutagenicity.

Arabidopsis signal transduction mutant defective in chemically and biologically induced disease resistance.

Plants possess multiple resistance mechanisms that guard against pathogen attack. Among these are inducible systems such as systemic acquired resistance (SAR). SAR is activated by pathogen exposure and leads to an increase in salicylic acid (SA), high-level expression of SAR-related genes, and resistance to a spectrum of pathogens. To identify components of the signal transduction pathways regulating SAR, a mutant screen was developed that uses 2,6-dichloroisonicotinic acid as an activator of SAR gene expression and pathogen resistance, followed by assays for resistance to the fungal pathogen Peronospora parasitica. Mutants from this screen were subsequently examined to assess their defense responses. We describe here a recessive mutation that causes a phenotype of insensitivity to chemical and biological inducers of SAR genes and resistance. These data indicate the existence of a common signaling pathway that couples these diverse stimuli to induction of SAR genes and resistance. Because of its non-inducible immunity phenotype, we call this mutant nim1. Although nim1 plants fail to respond to SA, they retain the ability to accumulate wild-type levels of SA, a probable endogenous signal for SAR. Further, the ability of nim1 plants to support growth of normally incompatible races of a fungal pathogen indicates a role for this pathway in expression of genetically determined resistance, consistent with earlier findings for transgenic plants engineered to break down SA. These results suggest that the wild-type NIM1 gene product functions in a pathway regulating acquired resistance, at a position downstream of SA accumulation and upstream of SAR gene induction and expression of resistance.

Signal transduction in systemic acquired resistance.

Systemic acquired resistance (SAR) is an important component of plant defense against pathogen infection. Accumulation of salicylic acid (SA) is required for the induction of SAR. However, SA is apparently not the translocated signal but is involved in transducing the signal in target tissues. Interestingly, SA accumulation is not required for production and release of the systemic signal. In addition to playing a pivotal role in SAR signal transduction, SA is important in modulating plant susceptibility to pathogen infection and genetic resistance to disease. It has been proposed that SA inhibition of catalase results in H2O2 accumulation and that therefore H2O2 serves as a second messenger in SAR signaling. We find no accumulation of H2O2 in tissues expressing SAR; thus the role of H2O2 in SAR signaling is questionable.

Alterazione della proteostasi a livello del reticolo endoplasmatico: un potenziale target terapeutico nel carcinoma prostatico

Nel sesso maschile il carcinoma della prostata (CaP) è la neoplasia più frequente ed è tra le prime cause di morte per tumore. Ad oggi, sono disponibili diverse strategie terapeutiche per il trattamento del CaP, ma, come comprovato dall’ancora alta mortalità, spesso queste sono inefficaci, a causa soprattutto dello sviluppo di fenomeni di resistenza da parte delle cellule tumorali. La ricerca si sta quindi focalizzando sulla caratterizzazione di tali meccanismi di resistenza e, allo stesso tempo, sull’individuazione di combinazioni terapeutiche che siano più efficaci e capaci di superare queste resistenze. Le cellule tumorali sono fortemente dipendenti dai meccanismi connessi con l’omeostasi proteica (proteostasi), in quanto sono sottoposte a numerosi stress ambientali (ipossia, carenza di nutrienti, esposizione a chemioterapici, ecc.) e ad un’aumentata attività trascrizionale, entrambi fattori che causano un accumulo intracellulare di proteine anomale e/o mal ripiegate, le quali possono risultare dannose per la cellula e vanno quindi riparate o eliminate efficientemente. La cellula ha sviluppato diversi sistemi di controllo di qualità delle proteine, tra cui gli chaperon molecolari, il sistema di degradazione associato al reticolo endoplasmatico (ERAD), il sistema di risposta alle proteine non ripiegate (UPR) e i sistemi di degradazione come il proteasoma e l’autofagia. Uno dei possibili bersagli in cellule tumorali secretorie, come quelle del CaP, è rappresentato dal reticolo endoplasmatico (RE), organello intracellulare deputato alla sintesi, al ripiegamento e alle modificazioni post-traduzionali delle proteine di membrana e secrete. Alterazioni della protestasi a livello del RE inducono l’UPR, che svolge una duplice funzione nella cellula: primariamente funge da meccanismo omeostatico e di sopravvivenza, ma, quando l’omeostasi non è più ripristinabile e lo stimolo di attivazione dell’UPR cronicizza, può attivare vie di segnalazione che conducono alla morte cellulare programmata. La bivalenza, tipica dell’UPR, lo rende un bersaglio particolarmente interessante per promuovere la morte delle cellule tumorali: si può, infatti, sfruttare da una parte l’inibizione di componenti dell’UPR per abrogare i meccanismi adattativi e di sopravvivenza e dall’altra si può favorire il sovraccarico dell’UPR con conseguente induzione della via pro-apoptotica. Le catechine del tè verde sono composti polifenolici estratti dalle foglie di Camellia sinesis che possiedono comprovati effetti antitumorali: inibiscono la proliferazione, inducono la morte di cellule neoplastiche e riducono l’angiogenesi, l’invasione e la metastatizzazione di diversi tipi tumorali, tra cui il CaP. Diversi studi hanno osservato come il RE sia uno dei bersagli molecolari delle catechine del tè verde. In particolare, recenti studi del nostro gruppo di ricerca hanno messo in evidenza come il Polyphenon E (estratto standardizzato di catechine del tè verde) sia in grado, in modelli animali di CaP, di causare un’alterazione strutturale del RE e del Golgi, un deficit del processamento delle proteine secretorie e la conseguente induzione di uno stato di stress del RE, il quale causa a sua volta l’attivazione delle vie di segnalazione dell’UPR. Nel presente studio su due diverse linee cellulari di CaP (LNCaP e DU145) e in un nostro precedente studio su altre due linee cellulari (PNT1a e PC3) è stato confermato che il Polyphenon E è capace di indurre lo stress del RE e di determinare l’attivazione delle vie di segnalazione dell’UPR, le quali possono fungere da meccanismo di sopravvivenza, ma anche contribuire a favorire la morte cellulare indotta dalle catechine del tè verde (come nel caso delle PC3). Considerati questi effetti delle catechine del tè verde in qualità di induttori dell’UPR, abbiamo ipotizzato che la combinazione di questi polifenoli bioattivi e degli inibitori del proteasoma, anch’essi noti attivatori dell’UPR, potesse comportare un aggravamento dell’UPR stesso tale da innescare meccanismi molecolari di morte cellulare programmata. Abbiamo quindi studiato l’effetto di tale combinazione in cellule PC3 trattate con epigallocatechina-3-gallato (EGCG, la principale tra le catechine del tè verde) e due diversi inibitori del proteasoma, il bortezomib (BZM) e l’MG132. I risultati hanno dimostrato, diversamente da quanto ipotizzato, che l’EGCG quando associato agli inibitori del proteasoma non produce effetti sinergici, ma che anzi, quando viene addizionato al BZM, causa una risposta simil-antagonistica: si osserva infatti una riduzione della citotossicità e dell’effetto inibitorio sul proteasoma (accumulo di proteine poliubiquitinate) indotti dal BZM, inoltre anche l’induzione dell’UPR (aumento di GRP78, p-eIF2α, CHOP) risulta ridotta nelle cellule trattate con la combinazione di EGCG e BZM rispetto alle cellule trattate col solo BZM. Gli stessi effetti non si osservano invece nelle cellule PC3 trattate con l’EGCG in associazione con l’MG132, dove non si registra alcuna variazione dei parametri di vitalità cellulare e dei marcatori di inibizione del proteasoma e di UPR (rispetto a quelli osservati nel singolo trattamento con MG132). Essendo l’autofagia un meccanismo compensativo che si attiva in seguito all’inibizione del proteasoma o allo stress del RE, abbiamo valutato che ruolo potesse avere tale meccanismo nella risposta simil-antagonistica osservata in seguito al co-trattamento con EGCG e BZM. I nostri risultati hanno evidenziato, in cellule trattate con BZM, l’attivazione di un flusso autofagico che si intensifica quando viene addizionato l’EGCG. Tramite l’inibizione dell’autofagia mediante co-somministrazione di clorochina, è stato possibile stabilire che l’autofagia indotta dall’EGCG favorisce la sopravvivenza delle cellule sottoposte al trattamento combinato tramite la riduzione dell’UPR. Queste evidenze ci portano a concludere che per il trattamento del CaP è sconsigliabile associare le catechine del tè verde con il BZM e che in futuri studi di combinazione di questi polifenoli con composti antitumorali sarà importante valutare il ruolo dell’autofagia come possibile meccanismo di resistenza.

Financial fragility, trade credit and contagion effects during the crisis: a spatial econometric approach to firm-level data

The number of distressed manufacturing firms increased sharply during recessionary phase 2009-13. Financial indebtness traditionally plays a key role in assessing firm solvency but contagion effects that originate from the supply chain are usually neglected in literature. Firm interconnections, captured via the trade credit channel, represent a primary vehicle of individual shocks’ propagation, especially during an economic downturn, when liquidity tensions arise. A representative sample of 11,920 Italian manufacturing firms is considered to model a two-step econometric design, where chain reactions in terms of trade credit accumulation (i.e. default of payments to suppliers) are primarily analyzed by resorting to a spatial autoregressive approach (SAR). Spatial interactions are modeled based on a unique dataset of firm-to-firm transactions registered before the outbreak of the crisis. The second step in instead a binary outcome model where trade credit chains are considered together with data on the bank-firm relationship to assess determinants of distress likelihoods in 2009-13. Results show that outstanding trade debt is affected by the liquidity position of a firm and by positive spatial effects. Trade credit chain reactions are found to exert, in turn, a positive impact on distress likelihoods during the crisis. The latter effect is comparable in magnitude to the one exerted by individual financial rigidity, and stresses the importance to include complex interactions between firms in the analysis of the solvency behavior.