Inter-observer variation in the diagnosis of coronal articular fracture lines in the lunate facet of the distal radius

Background: Several studies support the use of CT for diagnosing coronal fractures of the distal radius but the inter-observer reliability of these observations is less well studied. We tested the null hypothesis that radiographs alone and the combination of radiographs and two-dimensional computed tomography scans (2DCT) have the same inter-observer variation for the diagnosis of coronal articular fracture lines in the distal radius. Methods: Using a web-based survey, 63 surgeons were randomized to evaluate 16 fractures of the distal radius on radiographs alone or radiographs and 2DCT for the presence or absence of a coronal fracture line of the lunate facet and, if present, the stability of the fracture. The kappa multirater measure was calculated to estimate agreement between observers. Results: The inter-observer variation in diagnosis of a coronal fracture line was fair with both radiographs and 2DCT, as was the diagnosis of instability of the volar lunate facet fracture when present. Conclusion: Two-dimensional computed tomography does not improve observer agreement on the diagnosis of coronal plane articular fracture lines in the lunate facet of the distal radius. © 2012 American Association for Hand Surgery.

Prior fracture as a risk factor for future fracture in an Australian cohort

This study investigated the influence of prior fracture on the risk of subsequent fracture. There was a higher risk of subsequent fracture in both young and older adult age groups when Australian males or females had already sustained a prior fracture. Fracture prevention is important throughout life for both sexes.

Anterior knee symptoms after S-ROM hinge implantation

Purpose: To evaluate the performance of a canal filling hinge device for complex knee arthroplasty. Methods: Thirty-seven (4 primary hinge implantation and 33 revision cases) patients who had undergone arthroplasty with the S-ROM third generation hinge device for a combination of massive bone loss or ligamentous insufficiency were prospectively examined with a minimum of 5-year follow-up. Median age at surgery was 72 years (range: 43 to 87 years). Principal indications included aseptic loosening or massive osteolysis (24 cases), infection (8 cases) and periprosthetic fracture (4 cases). All patients exhibited either grade 2 (N = 12) or grade 3 (N = 25) AORI bone loss or a grade 3 medial ligament deficiency. Results: One patient experienced implant failure (71 months), and one patient suffered late deep infection (36 months). Mean WOMAC score improved from 27 to 62. Four patients required patellar resurfacing for persistent pain. The 5-year survivorship was 86%. Conclusions: While the S-ROM device may offer satisfactory medium term outcome for complex end stage knee disease, we report a high rate of debilitating anterior knee symptoms.

Investigating the predictive ability of gait speed and quadriceps strength for incident falls in community-dwelling older women at high risk of fracture

Gait speed is a recommended geriatric assessment of physical performance, but may not be regularly examined in clinical settings. We aimed to investigate whether quadriceps strength tests demonstrate similar predictive ability for incident falls as gait speed in older women. We investigated 135 female volunteers aged mean±SD 76.7±5.0 years (range 70-92) at high risk of fracture. Participants completed gait speed assessments using the GAITRite Electronic Walkway System, and quadriceps strength assessments using a hand-held dynamometer (HHD). Participants reported incident falls monthly for 3.7±1.2 years. N=99 (73%) participants fell 355 times during the follow-up period (mean fall rate 83 per 100 person years). We observed a reduced odds ratio for multiple falls (0.83, 95% CI 0.70-0.98) and a reduced hazard ratio for time to first fall (0.90, 95% CI 0.83-0.98), according to quadriceps strength. There was also a significantly shorter time to first fall for those with low quadriceps strength (<7.0 kg; lowest tertile) compared with those with normal quadriceps strength (estimated means [95% CI] 1.54 [1.02, 2.06] vs. 2.23 [1.82, 2.64] years; P=0.019), but not for those with low (<1.0 m/s) vs. normal gait speed (P=0.15). Quadriceps strength is a significant predictor of incident falls over three years amongst community-dwelling older women at high risk of fracture. Quadriceps strength tests may be an acceptable alternative to gait speed for geriatric assessments of falls risk.

Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality

 A macroscopic ductile fracture criterion is proposed based on micro-mechanism analysis of nucleation, growth and shear coalescence of voids from experimental observation of fracture surfaces. The proposed ductile fracture model endows a changeable cut-off value for the stress triaxiality to represent effect of micro-structures, the Lode parameter, temperature, and strain rate on ductility of metals. The proposed model is used to construct fracture loci of AA 2024- T351. The constructed fracture loci are compared with experimental data covering wide stress triaxiality ranging between –0.5 and 1.0. The comparison suggests that the proposed model can provide a satisfactory prediction of ductile fracture for metals from compressive upsetting tests to plane strain tension with slanted fracture surfaces. Moreover, it is expected that the proposed model reasonably describes ductile fracture behavior in high velocity perforation simulation since a reasonable cut-off value for the stress triaxiality is coupled with the proposed ductile fracture criterion.

Modified Mohr-Coulomb fracture model for anisotropic sheet materials under limited triaxial stress conditions

 This paper reviews recent work of the authors to model necking and fracture for anisotropic materials, which requires consideration of the stress conditions that vary through the thickness of the sheet, and in particular, taking into consideration the conditions at individual integration points. Although the prior work adequately addresses the roll of triaxial stress conditions on necking, the fracture model developed in the prior work was limited in its application to analysis of plane-stress conditions. In this work, a fracture model is developed for application to a limited range of triaxial stress conditions, in which the through-thickness shear stresses are assumed to be negligible, but the normal stress is allowed to be non-zero. The model is extended in a way that reduces to the prior anisotropic fracture model under plane stress conditions, but includes the contribution of a triaxial stress condition in a way that retains the desired features
of the Mohr-Coulomb Model.

Age- and sex-related patterns of first fracture and fracture prevalence

There are few data documenting the pattern of prevalent fracture across the entire adult age range, so we aimed to address this gap by investigating the prevalence of fractures in an Australian cohort. All-cause (ever) fractures were identified for males and females enrolled in the Geelong Osteoporosis Study (Australia) using a combination of radiology-confirmed and self-reported data. First fractures were used to generate age-related frequencies of individuals who had ever sustained a fracture. Of 1,538 males and 1,731 females, 927 males and 856 females had sustained at least one fracture since birth. The proportion of all prevalent fractures in the 0-10 year age group was similar for both sexes (~10 %). In males, the proportion with prevalent fracture increased to 34.1 % for age 11-20 year. Smaller increases were observed into mid-life, reaching a plateau at ~50 % from mid to late life. The age-related prevalence of fracture for females showed a more gradual increase until mid-life. For adulthood prevalent fractures, approximately 20 % of males had sustained a first adulthood fracture in the 20-30 year age group, with a gradual increase up to the oldest age group (49.1 %), while females showed an exponential pattern of increase from the 20-30 year age group (6.8 %) to the oldest age group (60.4 %). In both sexes, those who had not sustained a fracture in childhood or early adulthood generally appeared to remain fracture-free until at least the sixth decade. When considering the prevalence of adulthood fractures across the age groups, males showed a gradual increase while females showed an exponential increase.

Ti-SrO metal matrix composites for bone implant materials

Titanium-strontia (Ti-SrO) metal matrix composites (MMCs) with 0, 1, 3 and 5% (weight ratio) of SrO have been fabricated through the powder metallurgy method. Increasing the weight ratio of SrO from 0 to 5%, the compressive strength of Ti-SrO MMCs increased from 982 MPa to 1753 MPa, while the ultimate strain decreased from 0.28 to 0.05. The elastic moduli of Ti-3SrO and Ti-5SrO MMCs were higher than those of Ti and Ti-1SrO MMC samples. Additionally, the micro hardness of Ti-SrO MMCs was enhanced from 59% to 190% with the addition of SrO. The enhanced compression strength and micro hardness of Ti-SrO MMCs were attributed to the Hall-Petch effect and the SrO dispersion strengthening in the Ti matrix. MTS assay results demonstrated that Ti-SrO MMCs with 3% SrO exhibited enhanced proliferation of osteoblast-like cells. Alkaline phosphatase activity of cells was not influenced significantly on the surface of Ti-SrO MMCs compared with pure Ti in a term longer than 10 days. The cell morphology on the Ti-SrO MMCs was observed using confocal microscopy and scanning electron microscopy, which confirmed that the Ti-3%SrO MMCs showed optimal in vitro biocompatibility. This journal is © the Partner Organisations 2014.

Adulthood fracture and quality of life : A population-based study of Australian men

Background: Our objective was to investigate associations between adulthood fracture and quality of life (QOL) in men. Methods: For 448 men aged 50-85 years and enrolled in the Geelong Osteoporosis Study, we measured QOL using the validated (Australian) World Health Organization Quality of Life-Brief Version (WHOQOL-Bref) in the domains of physical health, psychological health, social relationships, and the environment. Self-reported adulthood fractures were categorized as recent or non-recent ( ≤ 10 years or > 10 years pre-QOL assessment, respectively). Lifestyle and health information were self-reported. Results: One hundred seventy four men (38.8%) sustained at least one fracture, 26% of which had occurred within the last 10 years. Compared with men who had never had an adulthood fracture, a non-recent fracture was more likely associated with poorer QOL in the physical health domain (age-adjusted odds ratio [OR] 0.47, 95% confidence interval [95%CI] 0.27-0.83), but not in any other domain. Men who had sustained a recent fracture reported a lower QOL in the domain of psychological health (age-adjusted OR 0.48, 95%CI 0.24-0.97), with a trend observed for lower QOL in the domains of physical health and environment. No further associations were observed. All results were sustained in further models that were adjusted for smoking, alcohol, physical inactivity, and body mass index. Conclusions: We present novel data examining associations between fracture status and QOL in a populationbased sample of Australian men using the WHOQOL-Bref. Recent fractures were associated with poorer QOL in the domain of psychological health while non-recent fractures were more likely associated poorer QOL for physical health. These findings have important implications for healthcare post-fracture.

Numerical investigation of influence of the Martensite Volume Fraction on dp steels fracture behavior on the basis of digital material representation model

Development of the methodology for creating reliable digital material representation (DMR) models of dual-phase steels and investigation of influence of the martensite volume fraction on fracture behavior under tensile load are the main goals of the paper. First, an approach based on image processing algorithms for creating a DMR is described. Then, obtained digital microstructures are used as input for the numerical model of deformation, which takes into account mechanisms of ductile fracture. Ferrite and martensite material model parameters are evaluated on the basis of micropillar compression tests. Finally, the model is used to investigate the impact of the martensite volume fraction on the DP steel behavior under plastic deformation. Results of calculations are presented and discussed in the paper.

Is there an interaction between socioeconomic status and FRAX 10-year fracture probability determined with and without bone density measures? Data from the Geelong Osteoporosis Study of female cohort.

FRAX(©) evaluates 10-year fracture probabilities and can be calculated with and without bone mineral density (BMD). Low socioeconomic status (SES) may affect BMD, and is associated with increased fracture risk. Clinical risk factors differ by SES; however, it is unknown whether aninteraction exists between SES and FRAX determined with and without the BMD. From the Geelong Osteoporosis Study, we drew 819 females aged ≥50 years. Clinical data were collected during 1993-1997. SES was determined by cross-referencing residential addresses with Australian Bureau of Statistics census data and categorized in quintiles. BMD was measured by dual energy X-ray absorptiometry at the same time as other clinical data were collected. Ten-year fracture probabilities were calculated using FRAX (Australia). Using multivariable regression analyses, we examined whether interactions existed between SES and 10-year probability for hip and any major osteoporotic fracture (MOF) defined by use of FRAX with and without BMD. We observed a trend for a SES * FRAX(no-BMD) interaction term for 10-year hip fracture probability (p = 0.09); however, not for MOF (p = 0.42). In women without prior fracture (n = 518), we observed a significant SES * FRAX(no-BMD) interaction term for hip fracture (p = 0.03) and MOF (p = 0.04). SES does not appear to have an interaction with 10-year fracture probabilities determined by FRAX with and without BMD in women with previous fracture; however, it does appear to exist for those without previous fracture.

The social gradient of fractures at any skeletal site in men and women: data from the Geelong Osteoporosis Study Fracture Grid.

Age-specific and age-standardized associations between socioeconomic status (SES) and fractures in adults showed a social gradient of fracture, irrespective of fracture site. Compared to the highest SES, males in the lowest SES group had a sixfold increased odds for any fracture, whilst females had a twofold increased odds.

Investigation of hydraulic fracture propagation using a post-peak control system coupled with acoustic emission

This study investigates the fracture mechanism of fluid coupled with a solid resulting from hydraulic fracture. A new loading machine was designed to improve upon conventional laboratory hydraulic fracture testing and to provide a means of better understanding fracture behavior of solid media. Test specimens were made of cement mortar. An extensometer and acoustic emission (AE) monitoring system recorded the circumferential deformation and crack growth location/number during the test. To control the crack growth at the post-peak stage the input fluid rate can be adjusted automatically according to feedback from the extensometer. The complete stress-deformation curve, including pre- and post-peak stages, was therefore obtained. The crack extension/growth developed intensively after the applied stress reached the breakdown pressure. The number of cracks recorded by the AE monitoring system was in good agreement with the amount of deformation (expansion) recorded by the extensometer. The results obtained in this paper provide a better understanding of the hydraulic fracture mechanism which is useful for underground injection projects. © 2014 Springer-Verlag Wien.

Carpal and scaphoid fracture incidence in south-eastern Australia: an epidemiologic study

UNLABELLED: Carpal fractures were identified by the Geelong Osteoporosis Study Fracture Grid for 2006-2007. Incidence rates were higher in males than females. Males had a lower median age of fracture than females. Females had more fractures on the left side than males. Most fractures were the result of a fall. PURPOSE: In this study, we report the incidence of carpal bone fractures (scaphoid and non-scaphoid) amongst residents from the Barwon Statistical Division over 2 years. METHODS: X-ray reports from imaging centres in the region were used to identify incident fractures during 2006 and 2007. Data were collected as part of the Geelong Osteoporosis Study Fracture Grid. RESULTS: During 2006 and 2007, there were 171 and 41 carpal fractures in males and females, respectively. Of these, 131 males and 29 females had fractured the scaphoid bone. Females had a higher proportion of left-sided fractures (>70 %) than males (∼40 %). Most fractures were the result of an accidental fall (>87 %). Patterns of incidence for males showed one major peak around 20-29 years. For females, peaks occurred around age 10-19 years and 70-79 years. Incidence rates for males (per 100,000 persons per year) were 54.6 (95 % confidence interval (CI) 53.6, 55.7) and 15.9 (95 % CI 15.4, 16.5) for scaphoid and non-scaphoid fractures, respectively. In females, the corresponding rates were 10.6 (95 % CI 10.2, 11.1) and 4.5 (95 % CI 4.2, 4.8). CONCLUSION: Almost all fractures were the result of a fall. In males, carpal fractures were sustained mainly during early adulthood and in females during adolescence and after menopause. Incidence rates for males were higher than those in females for both scaphoid and non-scaphoid fractures.