Manejo de memoria en programación lógica con tabulación

Los lenguajes de programación son el idioma que los programadores usamos para comunicar a los computadores qué queremos que hagan. Desde el lenguaje ensamblador, que traduce una a una las instrucciones que interpreta un computador hasta lenguajes de alto nivel, se ha buscado desarrollar lenguajes más cercanos a la forma de pensar y expresarse de los humanos. Los lenguajes de programación lógicos como Prolog utilizan a su vez el lenguaje de la lógica de 1er orden de modo que el programador puede expresar las premisas del problema que se quiere resolver sin preocuparse del cómo se va a resolver dicho problema. La resolución del problema se equipara a encontrar una deducción del objetivo a alcanzar a partir de las premisas y equivale a lo que entendemos por la ejecución de un programa. Ciao es una implementación de Prolog (http://www.ciao-lang.org) y utiliza el método de resolución SLD, que realiza el recorrido de los árboles de decisión en profundidad(depth-first) lo que puede derivar en la ejecución de una rama de busqueda infinita (en un bucle infinito) sin llegar a dar respuestas. Ciao, al ser un sistema modular, permite la utilización de extensiones para implementar estrategias de resolución alternativas como la tabulación (OLDT). La tabulación es un método alternativo que se basa en memorizar las llamadas realizadas y sus respuestas para no repetir llamadas y poder usar las respuestas sin recomputar las llamadas. Algunos programas que con SLD entran en un bucle infinito, gracias a la tabulación dán todas las respuestas y termina. El modulo tabling es una implementación de tabulación mediante el algoritmo CHAT. Esta implementación es una versión beta que no tiene implementado un manejador de memoria. Entendemos que la gestión de memoria en el módulo de tabling tiene gran importancia, dado que la resolución con tabulación permite reducir el tiempo de computación (al no repetir llamadas), aumentando los requerimientos de memoria (para guardar las llamadas y las respuestas). Por lo tanto, el objetivo de este trabajo es implementar un mecanismo de gestión de la memoria en Ciao con el módulo tabling cargado. Para ello se ha realizado la implementación de: Un mecanismo de captura de errores que: detecta cuando el computador se queda sin memoria y activa la reinicialización del sitema. Un procedimiento que ajusta los punteros del modulo de tabling que apuntan a la WAM tras un proceso de realojo de algunas de las áreas de memoria de la WAM. Un gestor de memoria del modulo de tabling que detecta c realizar una ampliación de las áreas de memoria del modulo de tabling, realiza la solicitud de más memoria y realiza el ajuste de los punteros. Para ayudar al lector no familiarizado con este tema, describimos los datos que Ciao y el módulo de tabling alojan en las áreas de memoria dinámicas que queremos gestionar. Los casos de pruebas desarrollados para evaluar la implementación del gestor de memoria, ponen de manifiesto que: Disponer de un gestor de memoria dinámica permite la ejecución de programas en un mayor número de casos. La política de gestión de memoria incide en la velocidad de ejecución de los programas. ---ABSTRACT---Programming languages are the language that programmers use in order to communicate to computers what we want them to do. Starting from the assembly language, which translates one by one the instructions to the computer, and arriving to highly complex languages, programmers have tried to develop programming languages that resemble more closely the way of thinking and communicating of human beings. Logical programming languages, such as Prolog, use the language of logic of the first order so that programmers can express the premise of the problem that they want to solve without having to solve the problem itself. The solution to the problem is equal to finding a deduction of the objective to reach starting from the premises and corresponds to what is usually meant as the execution of a program. Ciao is an implementation of Prolog (http://www.ciao-lang.org) and uses the method of resolution SLD that carries out the path of the decision trees in depth (depth-frist). This can cause the execution of an infinite searching branch (an infinite loop) without getting to an answer. Since Ciao is a modular system, it allows the use of extensions to implement alternative resolution strategies, such as tabulation (OLDT). Tabulation is an alternative method that is based on the memorization of executions and their answers, in order to avoid the repetition of executions and to be able to use the answers without reexecutions. Some programs that get into an infinite loop with SLD are able to give all the answers and to finish thanks to tabulation. The tabling package is an implementation of tabulation through the algorithm CHAT. This implementation is a beta version which does not present a memory handler. The management of memory in the tabling package is highly important, since the solution with tabulation allows to reduce the system time (because it does not repeat executions) and increases the memory requirements (in order to save executions and answers). Therefore, the objective of this work is to implement a memory management mechanism in Ciao with the tabling package loaded. To achieve this goal, the following implementation were made: An error detection system that reveals when the computer is left without memory and activate the reinizialitation of the system. A procedure that adjusts the pointers of the tabling package which points to the WAM after a process of realloc of some of the WAM memory stacks. A memory manager of the tabling package that detects when it is necessary to expand the memory stacks of the tabling package, requests more memory, and adjusts the pointers. In order to help the readers who are not familiar with this topic, we described the data which Ciao and the tabling package host in the dynamic memory stacks that we want to manage. The test cases developed to evaluate the implementation of the memory manager show that: A manager for the dynamic memory allows the execution of programs in a larger number of cases. Memory management policy influences the program execution speed.

Modelling and Control of Stepper Motors for High Accuracy Positioning Systems Used in Radioactive Environments

Hybrid Stepper Motors are widely used in open-loop position applications. They are the choice of actuation for the collimators in the Large Hadron Collider, the largest particle accelerator at CERN. In this case the positioning requirements and the highly radioactive operating environment are unique. The latter forces both the use of long cables to connect the motors to the drives which act as transmission lines and also prevents the use of standard position sensors. However, reliable and precise operation of the collimators is critical for the machine, requiring the prevention of step loss in the motors and maintenance to be foreseen in case of mechanical degradation. In order to make the above possible, an approach is proposed for the application of an Extended Kalman Filter to a sensorless stepper motor drive, when the motor is separated from its drive by long cables. When the long cables and high frequency pulse width modulated control voltage signals are used together, the electrical signals difer greatly between the motor and drive-side of the cable. Since in the considered case only drive-side data is available, it is therefore necessary to estimate the motor-side signals. Modelling the entire cable and motor system in an Extended Kalman Filter is too computationally intensive for standard embedded real-time platforms. It is, in consequence, proposed to divide the problem into an Extended Kalman Filter, based only on the motor model, and separated motor-side signal estimators, the combination of which is less demanding computationally. The efectiveness of this approach is shown in simulation. Then its validity is experimentally demonstrated via implementation in a DSP based drive. A testbench to test its performance when driving an axis of a Large Hadron Collider collimator is presented along with the results achieved. It is shown that the proposed method is capable of achieving position and load torque estimates which allow step loss to be detected and mechanical degradation to be evaluated without the need for physical sensors. These estimation algorithms often require a precise model of the motor, but the standard electrical model used for hybrid stepper motors is limited when currents, which are high enough to produce saturation of the magnetic circuit, are present. New model extensions are proposed in order to have a more precise model of the motor independently of the current level, whilst maintaining a low computational cost. It is shown that a significant improvement in the model It is achieved with these extensions, and their computational performance is compared to study the cost of model improvement versus computation cost. The applicability of the proposed model extensions is demonstrated via their use in an Extended Kalman Filter running in real-time for closed-loop current control and mechanical state estimation. An additional problem arises from the use of stepper motors. The mechanics of the collimators can wear due to the abrupt motion and torque profiles that are applied by them when used in the standard way, i.e. stepping in open-loop. Closed-loop position control, more specifically Field Oriented Control, would allow smoother profiles, more respectful to the mechanics, to be applied but requires position feedback. As mentioned already, the use of sensors in radioactive environments is very limited for reliability reasons. Sensorless control is a known option but when the speed is very low or zero, as is the case most of the time for the motors used in the LHC collimator, the loss of observability prevents its use. In order to allow the use of position sensors without reducing the long term reliability of the whole system, the possibility to switch from closed to open loop is proposed and validated, allowing the use of closed-loop control when the position sensors function correctly and open-loop when there is a sensor failure. A different approach to deal with the switched drive working with long cables is also presented. Switched mode stepper motor drives tend to have poor performance or even fail completely when the motor is fed through a long cable due to the high oscillations in the drive-side current. The design of a stepper motor output fillter which solves this problem is thus proposed. A two stage filter, one devoted to dealing with the diferential mode and the other with the common mode, is designed and validated experimentally. With this ?lter the drive performance is greatly improved, achieving a positioning repeatability even better than with the drive working without a long cable, the radiated emissions are reduced and the overvoltages at the motor terminals are eliminated.

Proceso de replanteo de un nodo urbano

El continuo desarrollo que está teniendo el mundo de las telecomunicaciones móviles hace que la red móvil esté sufriendo progresivos cambios para adaptarse a las nuevas tecnologías móviles que ofrecen un mejor servicio. El cambio en la red móvil no solo se produce por el desarrollo de las nuevas generaciones móviles. La red móvil se adapta también a la demanda de usuarios la cual no deja de incrementar a lo largo de los últimos años. Por tanto, los operadores tienen que ampliar su red instalando nodos que tengan las nuevas tecnologías y también las anteriores. Aparte de crear nuevos nodos también tienen que modificar sus nodos antiguos y convertirlos en nodos que soporten mayor número de usuarios. Hoy en día, en España, se están instalando nuevos nodos con 2G, 3G y 4G y además se están realizando ampliaciones de portadora para 3G. Este proyecto se divide en cuatro partes, la primera de ella se centra en explicar el proceso a seguir para la instalación de un nuevo nodo urbano. Este proceso es muy parecido para instalar un nodo con una tecnología u otra, en el caso del proyecto se explicarán los pasos a seguir para la instalación de un nodo con 2G y 3G. Posteriormente se explicará cómo se realizan las medidas para corroborar el correcto funcionamiento de un nodo rural y se compararán a las medidas de zona urbana mediante capturas de un nodo específico. En la penúltima parte del proyecto se estudia la cobertura en interiores y las diversas soluciones que se toman normalmente para mejorar dicha cobertura en edificios, almacenes y centros comerciales. Por último aparecen las conclusiones del proyecto y los trabajos futuros en donde se realiza una visión de posibles estudios relacionados con este proyecto y una visión de cómo puede quedar formada la red en unos años. ABSTRACT. Due to the continuous development of mobile telecommunications the mobile networks have undergone rapid changes to adapt to new mobile technologies that offer a better service. The mobile network change hasn´t only occurred because of the development of new generations of mobile radio-communications. The mobile network adapts itself to user demand, which has been growing over the last few years faster than expected. Therefore, mobile operators have to enlarge its network by installing nodes that share the old and new technologies. Apart from creating new nodes, the operators have to modify the old ones and turn them into nodes that support an increasing number of users. Nowadays, in Spain new nodes with 2G 3G and 4G are being installed, and carrier extensions for 3G are being made as well. This project is divided into four parts. The first chapter focuses on explaining the process that should be followed to install a new urban node. This process is similar to install a node with any of the technologies available. In the case of this project, the steps to follow in setting up a wireless node with 2G and 3G will be detailed. Afterwards, in the second chapter the document continues explaining the measurements that should be carried out to ensure proper performance of a rural node. Then, those measurements will be compared with the ones of an urban node. In the third part of the project it is explained how coverage indoor studies are performed, and the different solutions that are usually proposed to improve coverage in buildings, stores and shopping centers. The last chapter explains the conclusions that have been reached and future works. It is provided a widespread view of possible studies related to this project and how the mobile will improve in the following years.

Application of global numerical procedures to the analysis of shells

Examples of global solutions of the shell equations are presented, such as the ones based on the well known Levy series expansion. Also discussed are some natural extensions of the Levy method as well as the inherent limitations of these methods concerning the shell model assumptions, boundary conditions and geometric regularity. Finally, some open additional design questions are noted mainly related to the simultaneous use in analysis of these global techniques and the local methods (like the finite elements) to finding the optimal shell shape, and to determining the reinforcement layout.

UML 1.4 versus UML 2.0 as Languages to Describe Software Architectures.

ML 1.4 is widely accepted as the standard for representing the various software artifacts generated by a development process. For this reason, there have been attempts to use this language to represent the software architec- ture of systems as well. Unfortunately, these attempts have ended in representa- tions (boxes and lines) already criticized by the software architecture commu- nity. Recently, OMG has published a draft that will constitute the future UML 2.0 specification. In this paper we compare the capacities of UML 1.4 and UML 2.0 to describe software architectures. In particular, we study extensions of both UML versions to describe the static view of the C3 architectural style (a simplification of the C2 style). One of the results of this study is the difficulties found when using the UML 2.0 metamodel to describe the concept of connector in a software architecture.

A computational model of the anterior intraparietal area

The monkey anterior intraparietal area (AIP) encodes visual information about three-dimensional object shape that is used to shape the hand for grasping. In robotics a similar role has been played by modules that fit point cloud data to the superquadric family of shapes and its various extensions. We developed a model of shape tuning in AIP based on cosine tuning to superquadric parameters. However, the model did not fit the data well, and we also found that it was difficult to accurately reproduce these parameters using neural networks with the appropriate inputs (modelled on the caudal intraparietal area, CIP). The latter difficulty was related to the fact that there are large discontinuities in the superquadric parameters between very similar shapes. To address these limitations we adopted an alternative shape parameterization based on an Isomap nonlinear dimension reduction. The Isomap was built using gradients and curvatures of object surface depth. This alternative parameterization was low-dimensional (like superquadrics), but data-driven (similar to an alternative clustering approach that is also sometimes used in robotics) and lacked large discontinuities. Isomaps with 16 or more dimensions reproduced the AIP data fairly well. Moreover, we found that the Isomap parameters could be approximated from CIP-like input much more accurately than the superquadric parameters. We conclude that Isomaps, or perhaps alternative dimension reductions of CIP signals, provide a promising model of AIP tuning. We have now started to integrate our model with a robot hand, to explore the efficacy of Isomap shape reductions in grasp planning. Future work will consider dynamics of spike responses and integration with related visual and motor area models.

An adaptive population importance sampler

Monte Carlo (MC) methods are widely used in signal processing, machine learning and communications for statistical inference and stochastic optimization. A well-known class of MC methods is composed of importance sampling and its adaptive extensions (e.g., population Monte Carlo). In this work, we introduce an adaptive importance sampler using a population of proposal densities. The novel algorithm provides a global estimation of the variables of interest iteratively, using all the samples generated. The cloud of proposals is adapted by learning from a subset of previously generated samples, in such a way that local features of the target density can be better taken into account compared to single global adaptation procedures. Numerical results show the advantages of the proposed sampling scheme in terms of mean absolute error and robustness to initialization.

Towards workflow ecosystems through standard representations

Workflows are increasingly used to manage and share scientific computations and methods. Workflow tools can be used to design, validate, execute and visualize scientific workflows and their execution results. Other tools manage workflow libraries or mine their contents. There has been a lot of recent work on workflow system integration as well as common workflow interlinguas, but the interoperability among workflow systems remains a challenge. Ideally, these tools would form a workflow ecosystem such that it should be possible to create a workflow with a tool, execute it with another, visualize it with another, and use yet another tool to mine a repository of such workflows or their executions. In this paper, we describe our approach to create a workflow ecosystem through the use of standard models for provenance (OPM and W3C PROV) and extensions (P-PLAN and OPMW) to represent workflows. The ecosystem integrates different workflow tools with diverse functions (workflow generation, execution, browsing, mining, and visualization) created by a variety of research groups. This is, to our knowledge, the first time that such a variety of workflow systems and functions are integrated.

A dataset of RDF licenses

rights and conditions present in licenses for software, data and general works are expressed with the Open Digital Rights Language (ODRL) 2.0 vocabulary and extensions thereof. The dataset contains licenses identified by a dereferenceable URI, which are served with content negotiation providing a double representation for humans and machines alike. This feature enables a generalized machine-to-machine commerce if generally adopted.