EMAS and ISO 14001 in the German industry – complements or substitutes?

The two environmental management system (EMS) standards EMAS and ISO 14001 have been available in Europe for the last 15 years. ISO 14001 has been taken up at a much larger scale but many firms in the German automotive and engineering industry have certified their EMSs according to both standards. Two research questions are addressed: (i) What explains why companies adopt both EMAS and ISO 14001? (ii) Are EMAS and ISO 14001 complements or substitutes? Based on 21 interviews with industrial and institutional representatives, this study finds that, first, the two standards are adopted for completely different reasons: while ISO 14001 is often done as a response to external pressure, EMAS tends to be motivated internally. Second, it is argued that EMAS and ISO 14001 are likely in a situation of direct competition at present which may well turn into complementarity in the future.

An ecotoxicological approach to assessing the impact of tanning industry effluent on river health

A study was conducted to investigate the sediment health and water quality of the River Sagana, Kenya, as impacted by the local tanning industry. Chemical analysis identified the main chemical pollutants (pentachlorophenols and chromium) while a bioassay addressed pollutant bioavailability. The bioassay, exploiting the luminescence response of a lux marked bacterial biosensor, was coupled to a dehydrogenase and Dapnia magna test to determine toxicity effects on sediments. Results highlighted the toxicity of the tannery effluent to the sediments at the point of discharge (64% of control bioluminescence) with gradual improvement downstream. There was a significant increase in dehydrogenase downstream, with the enzyme activity attaining a peak at 600 m, also indicating a gradual reduction of toxicity. Biological oxygen demand (19.56 mg L(-1)) dissolved oxygen (3.97 mg L(-1)) and high lethal dose value (85%) of D. magna also confirmed an initial stress at the point of discharge and recovery downstream. Optical density of surface water demonstrated an increase in suspended particulates and colour after the discharge point, eventually decreasing beyond 400 m. In conclusion, the study highlighted the importance of understanding the biogeochemistry of river systems impacted by industries discharging effluent into them and the invaluable role of a biosensor-based ecotoxicological approach to address effluent hazards, particularly in relation to river sediments.

Assessing the occupational risk of dust particles in the Kenyan tanning industry using rapid image processing and microscopy techniques

The purpose of this study was to investigate the occupational hazards within the tanning industry caused by contaminated dust. A qualitative assessment of the risk of human exposure to dust was made throughout a commercial Kenyan tannery. Using this information, high-risk points in the processing line were identified and dust sampling regimes developed. An optical set-up using microscopy and digital imaging techniques was used to determine dust particle numbers and size distributions. The results showed that chemical handling was the most hazardous (12 mg m(-3)). A Monte Carlo method was used to estimate the concentration of the dust in the air throughout the tannery during an 8 h working day. This showed that the high-risk area of the tannery was associated with mean concentrations of dust greater than the UK Statutory Instrument 2002 No. 2677. stipulated limits (exceeding 10 mg m(-3) (Inhalable dust limits) and 4 mg m(-3) (Respirable dust limits). This therefore has implications in terms of provision of personal protective equipment (PPE) to the tannery workers for the mitigation of occupational risk.

Determining the regional potential for a grass biomethane industry

Grass biogas/biomethane has been put forward as a renewable energy solution and it has been shown to perform well in terms of energy balance, greenhouse gas emissions and policy constraints. Biofuel and energy crop solutions are country-specific and grass biomethane has strong potential in countries with temperate climates and a high proportion of grassland, such as Ireland. For a grass biomethane industry to develop in a country, suitable regions (i.e. those with the highest potential) must be identified. In this paper, factors specifically related to the assessment of the potential of a grass biogas/biomethane industry are identified and analysed. The potential for grass biogas and grass biomethane is determined on a county-by-county basis using multi-criteria decision analysis. Values are assigned to each county and ratings and weightings applied to determine the overall county potential. The potential for grass biomethane with co-digestion of slaughter waste (belly grass) is also determined. The county with the highest potential (Limerick) is analysed in detail and is shown to have ready potential for production of gaseous biofuel to meet either 50% of the vehicle fleet or 130% of the domestic natural gas demand, through 25 facilities at a scale of ca. 30ktyr of feedstock. The assessment factors developed in this paper can be used in other resource studies into grass biomethane or other energy crops. © 2010 Elsevier Ltd.

Irresponsible Lending?: A Case Study of a U.K. Credit Industry Reform Initiative

There are major concerns about the level of personal borrowing, particularly sourced from credit cards. This paper charts the progress of an initiative to create a Responsible Lending Index (RLI) for the credit industry. The RLI proposed to voluntarily benchmark lending standards and promote best practice within the credit industry by involving suppliers of credit, customer representatives and regulators. However, despite initial support from some banks, consumer bodies and the Chair of the Treasury Select Committee, it failed to gain sufficient support from financial institutions in its original format. The primary reasons for this were related to the complexity of building such a robust index and the banks trade body’s fear of exposing its members to public scrutiny. A revised alternative, the Responsible Lending Initiative, was proposed which took into account these concerns. However, the Association of Payment Clearing Service (APACS), the trade body of the credit industry, then effectively destroyed the proposal. This article describes an attempt to address the challenges in the credit card industry with the initiation of the RLI, reflected in stakeholder discourse and in the context of a wider concern expressed by the involved stakeholders in terms of the need for greater responsibility in the banking industry’s lending practices.

Efficacy of Biocides Used in the Modern Food Industry To Control Salmonella enterica, and Links between Biocide Tolerance and Resistance to Clinically Relevant Antimicrobial Compounds

Biocides play an essential role in limiting the spread of infectious disease. The food industry is dependent on these agents, and their increasing use is a matter for concern. Specifically, the emergence of bacteria demonstrating increased tolerance to biocides, coupled with the potential for the development of a phenotype of cross-resistance to clinically important antimicrobial compounds, needs to be assessed. In this study, we investigated the tolerance of a collection of susceptible and multidrug-resistant (MDR) Salmonella enterica strains to a panel of seven commercially available food-grade biocide formulations. We explored their abilities to adapt to these formulations and their active biocidal agents, i.e., triclosan, chlorhexidine, hydrogen peroxide, and benzalkonium chloride, after sequential rounds of in vitro selection. Finally, cross-tolerance of different categories of biocidal formulations, their active agents, and the potential for coselection of resistance to clinically important antibiotics were investigated. Six of seven food-grade biocide formulations were bactericidal at their recommended working concentrations. All showed a reduced activity against both surface-dried and biofilm cultures. A stable phenotype of tolerance to biocide formulations could not be selected. Upon exposure of Salmonella strains to an active biocidal compound, a high-level of tolerance was selected for a number of Salmonella serotypes. No cross-tolerance to the different biocidal agents or food-grade biocide formulations was observed. Most tolerant isolates displayed changes in their patterns of susceptibility to antimicrobial compounds. Food industry biocides are effective against planktonic Salmonella. When exposed to sublethal concentrations of individual active biocidal agents, tolerant isolates may emerge. This emergence was associated with changes in antimicrobial susceptibilities.

Corporate Social Responsibility within the Northern Ireland Construction Industry: A Regional Review

As the construction industry continues to struggle with a poor societal image, many organizations have adopted a positive corporate social responsibility (CSR) towards their surrounding environment, with the objective of improving their persona within social circles. The aim of this research is to identify and document the various approaches adopted by UK contractors in relation to their international counterparts to aid in the identification of possible future benefits which may be exploitable.
In order to acquire the relevant information, a number of qualitative methodologies are adopted including a review of the current literature on the topic along with a detailed semi-structured interview with a UK based industry professional that specializes in corporate social responsibility. Through assessing the findings using qualitative analysis software, it is possible to disseminate the information, resulting in the identification of key findings. This research concludes that a number of factors profoundly affect corporate social responsibility within the UK versus other regions. These factors are identified as the effect of the recession, implementation and reporting along with competitiveness within the sector.
The impaction for practice within the UK construction sector of this research is that it enables various industry leaders to actively consider the findings of the research while also vigorously encouraging the establishment and development of corporate social responsibility, not only within their respective organizations, but within the construction industry as a whole. This would not only result in a more environmentally sustainable industry, but would also raise the awareness of the sector locally, nationally and internationally, therefore improving the overall perception of the sector on a variety of levels. This will ultimately lead to a more sustainable, environmentally friendly and collective industry while also considering the needs of one of its most important external stakeholders – the local community.

Meeting the Requirements of the CDM Regulations: Identification of Critical Success Factors of Small to Medium Sized Contractor’ Compliance in the UK Construction Industry

The Construction Design and Management (CDM) Regulations (2007) is one of the most important set of health and safety regulations in the construction industry today. The aim of this research is to examine critical success factors for CDM compliance in small to medium size contractors in the UK construction industry. The objectives of the research include the identification of critical barriers in doing so along with the identification of success factors where CDM is incorporated. A mixed method approach is adopted in the identification and categorisation of the various factors encompassing a literature review, interviews and questionnaire survey. The key finding which emerge is the lack of knowledge and understanding with regards the CDM regulations with the recommendation to encourage small and medium contractor compliance through illustrating the benefits attainable. The practicality of the research is evident based on the significant uptake in the CDM by larger contractors, yet the research indicates that further insight and guidance is required to educate and inform those working within small to medium sized contractors in the UK. Where such acknowledgement and compliance is adopted, it is envisaged that this sector will benefit from reduced incidents and accidents, increased productivity while ultimately leading to a safer and more productive industry as a whole.