SMA-Based Muscle-Like Actuation in Biologically Inspired Robots: A State of the Art Review

New actuation technology in functional or "smart" materials has opened new horizons in robotics actuation systems. Materials such as piezo-electric fiber composites, electro-active polymers and shape memory alloys (SMA) are being investigated as promising alternatives to standard servomotor technology [52]. This paper focuses on the use of SMAs for building muscle-like actuators. SMAs are extremely cheap, easily available commercially and have the advantage of working at low voltages. The use of SMA provides a very interesting alternative to the mechanisms used by conventional actuators. SMAs allow to drastically reduce the size, weight and complexity of robotic systems. In fact, their large force-weight ratio, large life cycles, negligible volume, sensing capability and noise-free operation make possible the use of this technology for building a new class of actuation devices. Nonetheless, high power consumption and low bandwidth limit this technology for certain kind of applications. This presents a challenge that must be addressed from both materials and control perspectives in order to overcome these drawbacks. Here, the latter is tackled. It has been demonstrated that suitable control strategies and proper mechanical arrangements can dramatically improve on SMA performance, mostly in terms of actuation speed and limit cycles.

Making Transport Safer: V2V-Based Automated Emergency Braking System

An important goal in the field of intelligent transportation systems (ITS) is to provide driving aids aimed at preventing accidents and reducing the number of traffic victims. The commonest traffic accidents in urban areas are due to sudden braking that demands a very fast response on the part of drivers. Attempts to solve this problem have motivated many ITS advances including the detection of the intention of surrounding cars using lasers, radars or cameras. However, this might not be enough to increase safety when there is a danger of collision. Vehicle to vehicle communications are needed to ensure that the other intentions of cars are also available. The article describes the development of a controller to perform an emergency stop via an electro-hydraulic braking system employed on dry asphalt. An original V2V communication scheme based on WiFi cards has been used for broadcasting positioning information to other vehicles. The reliability of the scheme has been theoretically analyzed to estimate its performance when the number of vehicles involved is much higher. This controller has been incorporated into the AUTOPIA program control for automatic cars. The system has been implemented in Citroën C3 Pluriel, and various tests were performed to evaluate its operation.

Diseño y acondicionamiento acústico y electroacústico de una sala de proyecciones en 3D

Este proyecto está orientado al diseño y el acondicionamiento de una sala de cine siguiendo las normas establecidas por el SMPTE. El primer paso a realizar será el diseño de la sala en el cual habrá que tener en cuenta la distribución de los asientos dentro de la misma, el dimensionado de la pantalla que servirá para establecer la forma y dimensiones del recinto, así como la correcta ubicación del proyector. Posteriormente se realizará el acondicionamiento acústico del cine, con la elección de los diferentes materiales que permitan la obtención de un tiempo de reverberación óptimo. A continuación se procederá a la selección de los equipos electroacústicos más adecuados y a su colocación a lo largo de la sala para posteriormente realizar un estudio de todos los parámetros de esta para garantizar la perfecta escucha dentro de la misma. Se elegirán, al igual que se ha hecho con los elementos electroacústicos, los equipos de video específicos, teniendo en cuenta el sistema de proyección 3D utilizado y se procederá a su instalación dentro de la sala. Se indicará de forma independiente cual será el esquema de conexionado correspondiente a cada una de las partes, tanto de audio como de video. Todos los equipos y parámetros ajustables de la sala, tanto de audio como de video, se realizaran siguiendo las recomendaciones establecidas por el SMPTE para una correcta visión y escucha, así como también el diseño de la sala. Para llevar a cabo todo lo anteriormente descrito se utilizara el programa de simulación EASE 4.3 con él que se ajustaran los parámetros más significativos para verificar que la sala cumple con las condiciones de escucha que determina la norma. Todo esto irá acompañado de un presupuesto detallado de cada uno de los equipos y materiales utilizados, así como de los costes derivados de la mano de obra. Se adjuntarán también los planos de la sala donde se indicarán todas las medidas establecidas a lo largo del proyecto. Para la realización de estos se utilizara el programa de diseño Google SkechUp. Por último se facilitarán las hojas de características de cada uno de los equipos instalados en la sala para conocer sus especificaciones y modo de funcionamiento. Abstract This project is orientated at designing and conditioning a cinema according to standards set by the SMPTE. First of all, the cinema hall needs to be designed, taking into consideration seat distribution and screen dimension, in order to establish the shape and dimensions of the room and the correct location for the projector. Later the acoustic conditioning of the cinema is covered, with the choice of appropriate materials in order to permit an optimum reverberation time. The next step is the selection of the most appropriate electro-acoustic equipment and its positioning throughout the room. A study is then carried out of all the parameters to ensure perfect hearing in the cinema. Then the specific video equipment is chosen, bearing in mind the 3D projection system used and is installed in the theatre. A wiring diagram is indicated for each element used, for both audio and video. All equipment and adjustable parameters of the room, both audio and video, are made according to the recommendations established by the SMPTE for correct viewing and listening, as is the design of the cinema. To carry out the steps described above the EASE 4.3 simulation program is used. This program adjusts all significant parameters to verify that the room complies with the listening conditions determined by the standard. A detailed budget is included for all equipment and materials used, as well as the labour costs. Plans of the room, showing all measurements taken during the project are indicated. This is done using the Google SkechUp program. Finally data sheets are provided for each piece of equipment installed in the room detailing specifications and operating mode.