Anodização para obtenção de membranas cerâmicas

This a study on the achievement of alumina membranes by the method of anodizing. From this method got up a layer of aluminum oxide on the anodic metal, who presented the basic properties necessary for the application as a support for the production and acquisition of nanomaterials, such as porosity nano and resistance to high temperature, and other properties, as resistance to corrosion, and chemical, high ranking of the structure and pore size of the pores. The latter, ranging from 10 to 100nm depended on the electrolyte used, which in this study was the H2SO4. To remove all remaining aluminum, it is a bath of dissolution with HCl and CuCl where the residual aluminum has been withdrawn, and the deep pores were opened after chemical treatment with NaOH. After the dissolution, the membranes were calcined at temperatures of 300, 600 and 900° C, and sintered at temperatures of 1200 and 1300º C to win mechanical strength, porosity and observe the desired crystallization. Then went through analyses of composition through X-ray diffraction and morphology of the microstructure through a scanning electron microscope. The method was effective for obtaining alumine membranes applied in the processes of production of materials in nano

Estudo da oxidação superficial de ligas odontológicas de Ni-Cr em plasma pulsado para uso em restaurações metalocerâmicas

Metal ceramic restorations matches aesthetic and strength, and in your making occurs an interface oxide layer, wetting resulting and atomic and ionic interactions resulting between metal, oxide and porcelain. However, frequent clinical fails occurs in this restoration type, because lost homogeneous deposition oxide layer and lost interface bond. Thus, in this study, thought depositate homogeneous oxide films above Ni-Cr samples surfaces polite previously, at plasma oxide environment. Six samples was oxided at 300 and 400ºC at one hour, and two samples was oxided in a comum chamber at 900ºC, and then were characterized: optical microscopic, electronic microscopic, micro hardness, and X ray difratometry. Colors stripes were observed at six samples plasma oxided and a grey surface those comum oxided, thus like: hardness increase, and several oxides from basic metals (Ni-Cr)

Análise estatística das emissões de CO e HC produzidas por gases da exaustão veicular oriundos de gasolina, GNV e mistura álcool/gasolina

The vehicles are the main mobile sources of carbon monoxide (CO) and unburned hydrocarbons (HC) released into the atmosphere. In the last years the increment of the fleet of vehicles in the municipal district of Natal-RN it is contributing to the increase of the emissions of those pollutants. The study consisted of a statistical analysis of the emissions of CO and HC of a composed sample for 384 vehicles with mechanization Gasoline/CNG or Alcohol/Gasoline/CNG of the municipal district of Natal-RN. The tests were accomplished in vehicles submitted to Vehicular Safety's Inspection, in the facilities of INSPETRANS, Organism of Vehicular Inspection. An partial gases analyzer allowed to measure, for each vehicle, the levels of CO and HC in two conditions of rotation of the motor (900 and 2500 rpm). The statistical analysis accomplished through the STATISTICA software revealed a sensitive reduction in the efficiency of the converters catalytic after 6 years of use with emission average it is of 0,78% of CO and 156 (ppm) of HC, Which represents approximately 4 (four) times the amount of CO and the double of HC in comparison with the newest vehicles. The result of a Student s t-test, suggests strongly that the average of the emissions of HC (152 ppm), at 900 rpm, is 40% larger than at 2500 rpm, for the motor without load. This result reveals that the efficiency of the catalytic conversion is limited kinetically in low engine speeds. The Study also ends that when comparing the emissions of CO and HC considering the influence of the fuels, it was verified that although the emissions of CO starting from CNG are 62% smaller than arising from the gasoline, there are not significant differences among the emissions of HC originating from of CNG and of the gasoline. In synthesis, the results place the current criteria of vehicular inspection, for exhaust gases, in doubt, leading the creation of emission limits of pollutant more rigorous, because the efficiency of the converters catalytic is sensibly reduced starting from 6 years of use. It is also raised the possibility of modifications in the test conditions adopted by the current norms, specifically in the speed engine, have seen that in the condition without load the largest emission indexes were registered in slow march. That fact that allows to suggest the dismissal of the tests in high speed engine, reducing the time of inspection in half and generating economy of fuel

Basal temperature and thermal sum in phenological phases of nectarine and peach cultivars

O objetivo deste trabalho foi avaliar a temperatura basal, a soma térmica acumulada em diferentes fases fenológicas, a duração das fenofases, a produtividade e a sazonalidade do ciclo de uma cultivar de nectarina e de 14 cultivares de pêssego, entre 2006 e 2009. As fases fenológicas consideradas foram: poda-brotação; brotação-florescimento, da gema inchada até a flor aberta; florescimento-frutificação, da queda das pétalas até o fruto médio; e maturação. As temperaturas basais mínimas obtidas foram: poda-brotação, 8°C, independentemente das cultivares avaliadas; brotação-florescimento, 10°C, com exceção de 'Cascata 968', que necessitou de Tb de 8°C; florescimento-frutificação, 12°C, exceto 'Oro Azteca', que necessitou de Tb de 14°C; maturação, 14°C, com exceção de 'Sunblaze', 'Diamante Mejorado' e 'Precocinho', com Tb de 12°C. Para a maioria das cultivares, as temperaturas basais máximas foram de 30, 34, 34 e 28ºC, nas fases poda-brotação, brotação-florescimento, florescimento-frutificação e maturação, respectivamente. 'Turmalina', 'Marli' e 'Tropic Beauty' apresentaram produtividade média de 3.945,0, 3.969,3 e 3.954,0 kg ha-1, em 2009, respectivamente, enquanto a nectarineira 'Sunblaze' produziu em torno de 3.900 kg ha-1 em 2008 e 2009. As cultivares diferiram quanto ao ciclo total e quanto às somas térmicas acumuladas que variaram, respectivamente, de 245 dias e 1.881,4 graus-dia em 'Oro Azteca', a 144 dias e 1.455,7 graus-dia em 'Precocinho'.

Síntese citrato-hidrotermal e caracterização eletroquímica de LSCF para aplicação como catodo em célula a combustível de temperatura intermediária

The lanthanum strontium cobalt iron oxide (La1-xSrxCo1-yFeyO3 LSCF) is the most commonly used material for application as cathode in Solid Oxide Fuel Cells (SOFCs), mainly due to their high mixed ionic electronic conductivity between 600 and 800ºC. In this study, LSCF powders with different compositions were synthesized via a combination between citrate and hydrothermal methods. As-prepared powders were calcined from 700 to 900°C and then characterized by X-ray fluorescence, X-ray diffraction, thermal analyses, particle size analyses, nitrogen adsorption (BET) and scanning electronic microscopy. Films of composition La0,6Sr0,4Co0,2Fe0,8O3 (LSCF6428), powders calcined at 900°C, were screen-printed on gadolinium doped ceria (CGO) substrates and sintered between 1150 and 1200°C. The effects of level of sintering on the microstructure and electrochemical performance of electrodes were evaluated by scanning electronic microscopy and impedance spectroscopy. Area specific resistance (ASR) exhibited strong relation with the microstructure of the electrodes. The best electrochemical performance (0.18 ohm.cm2 at 800°C) was obtained for the cathode sintered at 1200°C for 2 h. The electrochemical activity can be further improved through surface activation by impregnation with PrOx, in this case the electrode area specific resistance decreases to values as low as 0.12 ohm.cm2 (800°C), 0.17 ohm.cm2 (750°C) and 0.31 ohm.cm2 (700°C). The results indicate that the citrate-hydrothermal method is suitable for the attainment of LSCF particulates with potential application as cathode component in intermediate temperature solid oxide fuel cells (IT-SOFCs)

Seletividade de herbicidas pré-emergentes para gramíneas forrageiras tropicais

Este trabalho constou de quatro estudos que foram realizados em casa de vegetação, nos quais se avaliou a seletividade de diferentes herbicidas, aplicados em pré-emergência, sobre algumas gramíneas forrageiras tropicais: Brachiaria decumbens, Brachiaria brizantha cv. Marandu e Panicum maximum cultivares Tanzânia e Mombaça. Os herbicidas e as doses utilizadas, em g ha-1, para cada estudo foram: alachlor - 1.680 e 3.360, metolachlor - 1.200 e 2.400, diuron - 800 e 1.600, imazaquin - 75 e 150, imazapyr - 250 e 500, imazethapyr - 50 e 100, clomazone - 450 e 900, flumetsulam - 70 e 140, ametryn - 625 e 1.250, metribuzin - 525 e 1.050 e trifluralin - 900 e 1.800, além de uma testemunha sem aplicação de herbicidas. Utilizou-se o delineamento experimental inteiramente casualizado, com seis repetições. O consumo de calda de aplicação foi de 180 L ha-1,e a barra de aplicação continha quatro bicos de jato plano tipo 'Teejet' 110.02, espaçados de 0,50 m. Avaliou-se visualmente a intoxicação das plantas através de uma escala percentual de notas e, no final dos estudos, a altura e o peso de matéria seca de plantas. Para P. maximum cv. Mombaça, apenas os herbicidas imazaquin (75 g ha-1), imazethapyr e flumetsulam, em ambas as doses testadas, foram seletivos. Para P. maximum cv. Tanzânia, nenhum dos herbicidas testados foi totalmente seletivo. em relação a B. decumbens, os herbicidas imazaquin e imazethapyr, em ambas as doses, e ametryn (625 g ha¹) foram seletivos. No caso de B. brizantha, os herbicidas diuron (800 g ha¹), ametryn, imazaquin, imazethapyr e flumetsulam, em ambas as doses, apresentaram-se seletivos.

Avaliação da deposição da calda de pulverização em função da densidade populacional de Brachiaria plantaginea, do volume e do ângulo de aplicação

O presente trabalho teve por objetivo avaliar a quantidade de calda de pulverização depositada nas folhas de Brachiaria plantaginea, em aplicações de pós-emergência precoce, em que se variou o volume de calda de pulverização, a densidade de plantas m-2 e o ângulo de posicionamento da ponta de pulverização na barra de aplicação. Para isso, foram conduzidos três experimentos em condições de laboratório. Nestes estudos, o volume de calda de pulverização foi obtido por meio da variação da velocidade de deslocamento de um veículo composto por plataforma e quatro rolamentos tracionados por um motor elétrico. Foi utilizada a ponta de pulverização XR Teejet 8001 EVS, na pressão de 241,4 kPa. O delineamento experimental utilizado foi o inteiramente casualizado, com cinco repetições. No primeiro experimento, os volumes utilizados foram de 1147,57; 860,68; 573,78; 459,02; 344,27; 229,51; 114,75; e 57,37 L ha-1 de calda de pulverização, com densidade de 600 plantas m-2. No segundo experimento foram estudadas as densidades de 300, 600, 900 e 1.200 plantas m-2; neste caso, utilizou-se o volume de 229,51 L ha-1 de calda de pulverização. No terceiro experimento avaliou-se o posicionamento do ângulo da ponta de pulverização na barra de aplicação e utilizou-se a densidade de 600 plantas m-2. Estudaram-se os ângulos de -30º, -15º, 90º, +15º e +30º e os volumes de calda de pulverização de 198,76; 221,69; 229,51; 221,69; e 198,76 L ha-1, respectivamente. Foram adotados sinais negativos para o sentido de deslocamento do veículo e sinais positivos para o sentido contrário ao deslocamento. As avaliações do depósito de calda de pulverização, na planta e no solo, foram feitas utilizando-se condutividade elétrica. A porcentagem de depósito de calda de pulverização nas plantas de B. plantaginea foi incrementada com a redução do volume de calda pulverizada por hectare. O depósito de calda por planta foi maior nas densidades maiores de plantas. O ângulo de posicionamento da ponta de pulverização na barra de aplicação incrementou o depósito de calda nas plantas de B. plantaginea, quando comparado com o ângulo de 90º.

Produtividade de grãos e exportação de nutrientes de cultivares de arroz irrigadas por aspersão em conseqüência da época de semeadura

No sistema irrigado por aspersão, o uso de cultivares e épocas adequadas de semeadura podem possibilitar a obtenção de altos níveis de produtividade do arroz de terras altas. No entanto, são escassas as informações sobre a exportação de nutrientes pelos grãos dessa cultura nesse sistema de produção. Este trabalho objetivou avaliar o efeito da época de semeadura na produtividade e exportação de nutrientes pelos grãos de cultivares de arroz de terras altas (IAC 201, IAC 202, Carajás, CNA 7800 e CNA 7801), irrigados por aspersão. Os experimentos foram desenvolvidos nos anos agrícolas de 1995/1996 e 1996/1997, em Latossolo Vermelho distrófico, em Selvíria (MS). As semeaduras foram realizadas no início da segunda quinzena de setembro, outubro, novembro, dezembro, janeiro e fevereiro, de cada ano. Foi utilizado o delineamento de blocos ao acaso, em esquema de parcela subdividida, com quatro repetições. A época de semeadura influenciou a produtividade de grãos e exportação de nutrientes pelos grãos. A semeadura realizada em novembro proporcionou maior exportação de nutrientes por promover produtividades mais elevadas. em épocas de semeadura antecipada (setembro), com a cultivar Carajás, a produtividade e a exportação de nutrientes foram superiores às demais; já nas semeaduras de outubro a dezembro, a cultivar CNA 7801 se destacou. No sistema irrigado por aspersão, é possível semeadura em fevereiro com produtividade acima 3.900 kg ha-1 utilizando as cultivares IAC 201 e Carajás.

Morphomolecular characterization of Pleurotus ostreatus (Jacq. Fr.) kummer strains in relation to luminosity and temperature of frutification

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Clones promissores de seringueira para a região do Vale do Ribeira, São Paulo

Este trabalho objetivou apresentar resultados da primeira seleção de clones de seringueira (Hevea brasiliensis (Willd. ex Adr. de Juss.) Muell.Arg.) da série IAC 300, e amazônicos das séries IAN e Fx, em experimento de pequena escala, visando produção, crescimento e resistência ao mal-das-folhas. A produção e o vigor de 20 clones foram avaliados por dois e nove anos, respectivamente, em PariqüeraAçú, no Vale do Ribeira, SP. Os clones IAC 301, IAC 304, IAC 306 e IAC 319 produziram satisfatoriamente nos dois primeiros anos de sangria. Os clones amazônicos IAN 6323, Fx 3864 e IAN 2903, com produções de 1.078 kg, 945 kg e 900 kg/ha/ano, respectivamente, foram superiores à testemunha IAN 873 (878 kg/ha/ano). Os clones selecionados apresentaram crescimento vigoroso, com extremos de perímetro do caule, na abertura do painel, de 37,40 cm (IAN 4493) a 53,75 cm (IAN 6323), e percentual de plantas aptas à sangria de 7,0% (IAN 4493) a 100% (IAN 6323 e IAC 302), exceto os clones Fx 3899 e IAN 3044. O IAC 315, com 7,37 mm, mostrou maior espessura de casca virgem que o IAN 873 (6,44 mm). Os clones IAC 320, IAC 306 e IAC 315 foram os mais resistentes ao Microcyclus ulei.

Cultura de embrião e indução de brotos in vitro para micropropagação do pinhão-manso

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aplicação da água residuária das salinas no tratamento de efluente têxtil

The treatment of colored and alkaline effluent has been a challenge to the textile industry. An alternative to remove the colors of those effluents is applying magnesium chloride as a coagulant agent. The magnesium ion, in high pH, hydrolyzes itself, forming the magnesium hydroxide which has a large adsorptive area and positive electrostatic charges able to act as an efficient coagulant. The bittern wastewater from the salt industries has been studied as a potential font of this magnesium ion. Nowadays, this bittern wastewater is evicted into the sea, without any treatment or other use. This thesis has evaluated the potential of applying the wastewater from the salt industries in the treatment of dyeing effluent containing indigo dye and alkaline pH. All the experiments were made in jar tests simulating the chemical coagulation, flocculation and decantation steps ranging the pH and the concentration of magnesium ion. Were obtained removals between 96% and 76% for turbidity, apparent color, and true color, respectively, using 200mg/L Mg2+. The reduction of costs with acid, when were used the salt industries wastewater, comparing with Al2(SO4)3, was 62%. For the degradation of organic matter remaining in the clarified, around 900 mg/L, was applyed the advanced process of oxidation: photo-Fenton. The preliminary results showed 57% reduction in DOC. According to the results obtained, the salt industries wastewater can be applied, as coagulant, in the physical-chemical treatment of the denim dyeing wastewater, so it is not necessary a previous adjust of pH, efficiently and economically

Utilização de uma coluna de flotação para remoção de compostos orgânicos da água de produção

Innovative technologies using surfactant materials have applicability in several industrial fields, including petroleum and gas areas. This study seeks to investigate the use of a surfactant derived from coconut oil (SCO saponified coconut oil) in the recovery process of organic compounds that are present in oily effluents from petroleum industry. For this end, experiments were accomplished in a column of small dimension objectifying to verify the influence of the surfactant SCO in the efficiency of oil removal. This way, they were prepared emulsions with amount it fastens of oil (50, 100, 200 and 400 ppm), being determined the great concentrations of surfactant for each one of them. Some rehearsals were still accomplished with produced water of the industry of the petroleum to compare the result with the one of the emulsions. According to the experiments, it was verified that an increase of the surfactant concentration does not implicate in a greater oil removal. The separation process use gaseous bubbles formed when a gas stream pass a liquid column, when low surfactant concentrations are used, it occurs the coalescence of the dispersed oil droplets and their transport to the top of the column, forming a new continuous phase. Such surfactants lead to a gas-liquid interface saturation, depending on the used surfactant concentration, affecting the flotation process and influencing in the removal capacity of the oily dispersed phase. A porous plate filter, with pore size varying from 40 to 250 mm, was placed at the base of the column to allow a hydrodynamic stable operation. During the experimental procedures, the operating volume of phase liquid was held constant and the rate of air flow varied in each experiment. The resulting experimental of the study hydrodynamic demonstrated what the capturing of the oil was influenced by diameter of the bubbles and air flow. With the increase flow of 300 about to 900 cm3.min-1, occurred an increase in the removal of oil phase of 44% about to 66% and the removal kinetic of oil was defined as a reaction of 1° order

Biomphalaria tenagophila: genetic variability within intermediate snail hosts susceptible and resistant to Schistosoma mansoni infection

DNA analysis by molecular techniques has significantly expanded the perspectives of the study and understanding of genetic variability in molluscs that ere vectors of schistosomiasis. In tire present study, the genetic variability of susceptible and resistant B. tenagophila strains to S. mansoni infection was investigated using amplification of their genomic DNA by RAPD-PCR. The products were analyzed by PAGE and stained with silver. The results showed pdymorphism between tested strains with four different primers. We found two bonds of 1,900 and 3,420 bp that were characteristic of the susceptible strains with primer 2. The primers 9 end 10 identified a single polymorphic bond that was also characteristic of (3,136 and 5,041 bp, respectively) susceptible snails. Two polymorphic bonds were detected by primer 15: one with 1 800 bp was characteristic of the resistant strain and the other with 1,700 do in the susceptible one. These results provide additional evidence showing that the RAPD-PCR technique is adequate for the study of polymorphisms in intermediate hosts snails of S. mansoni. The obtained results are expected to expend the knowledge about the genetic variability of the snails and to permit the future identification of genomic sequences specifically related to the resistance/susceptibility of Biompholario to the larval forms of S. mansoni.

Wine classification by taste sensors made from ultra-thin films and using neural networks

This paper reports on a sensor array able to distinguish tastes and used to classify red wines. The array comprises sensing units made from Langmuir-Blodgett (LB) films of conducting polymers and lipids and layer-by-layer (LBL) films from chitosan deposited onto gold interdigitated electrodes. Using impedance spectroscopy as the principle of detection, we show that distinct clusters can be identified in principal component analysis (PCA) plots for six types of red wine. Distinction can be made with regard to vintage, vineyard and brands of the red wine. Furthermore, if the data are treated with artificial neural networks (ANNs), this artificial tongue can identify wine samples stored under different conditions. This is illustrated by considering 900 wine samples, obtained with 30 measurements for each of the five bottles of the six wines, which could be recognised with 100% accuracy using the algorithms Standard Backpropagation and Backpropagation momentum in the ANNs. (C) 2003 Elsevier B.V. All rights reserved.