Analysis of urinary 8-hydroxydeoxyguanosine by capillary electrophoresis and solid-phase extraction

Urinary 8-hydroxydeoxyguanosine (80HdG) has been considered as an excellent marker of individuals at high risk of developing cancer. Until now, urinary 80HdG has largely been measured by high-performance liquid chromatography with electrochemical detection. A new method for the analysis of urinary 80HdG by high-performance capillary electrophoresis has been developed and optimized in our laboratory. A single step solid-phase extraction procedure was optimized and used for extracting 80HdG from human urine. Separations were performed in an uncoated silica capillary (50 cm x 50 tm i.d.) using a P/ACE MDQ system with UV detection. The separation of 80HdG from interfering urinary matrix components is optimized with regard to pH, applied voltage, pressure injection time and concentration of SDS in running buffer. The detection limit of this method is 0.4 mug/ml, the linear range is 0.8-500 mug/ml, the correlation coefficients levels is better than 0.999. The developed method is simple, fast and good reproducibility, furthermore, it requires a very small injection volumes and low costs of analysis, which makes it possible to provide a new noninvasive assay for an indirect measurement of oxidative DNA damage.

Separation of acidic compounds by strong anion-exchange capillary electrochromatography

Separation of the acidic compounds in the ion-exchange capillary electrochromatograph (IE-CEC) with strong anion-exchange packing as the stationary phase was studied. It was observed that the electroosmotic flow (EOF) in strong anion-exchange CEC moderately changed with increase of the eluent ionic strength and decrease of the eluent pH, but the acetonitrile concentration in the eluent had almost no effect on the EOF. The EOF in Strong anion-exchange CEC with eluent of low pH value was much larger than that in RP-CEC with Spherisorb-ODS as the stationary phase. The retention of acidic compounds on the strong anion-exchange packing was relatively weak due to only partial ionization of them, and both chromatographic and electrophoretic processes contributed to separation. It was observed that the retention values of acidic compounds decreased with the increase of phosphate buffer and acetonitrile concentration in the eluent as well as the decrease of the applied voltage, and even the acidic compounds could elute before the void time. These factors also made an important contribution to the separation selectivity for tested acidic compounds, which could be separated rapidly with high column efficiency of more than 220 000 plates/m under the optimized separation conditions. (C) 2000 Elsevier Science BN. All rights reserved.

Separation of peptides by strong cation-exchange capillary electrochromatography

Separation of small peptides on ion-exchange capillary electrochromatography (IE-CEC) with strong cation-exchange packing (SCX) as stationary phase was investigated. It was observed that the number of theoretical plates for small peptides varied from 240 000 to 460 000/m, and the relative standard deviation for t(0) and the migration time of peptides were less than 0.57% and 0.27%, respectively for ten consecutive runs. Unusually high column efficiency has been explained by the capillary electrophoretic stacking and chromatofocusing phenomena during the injection and separation of positively charged peptides. The sample buffer concentration had a marked effect on the column efficiency and peak area of the retained peptides. The influences of the buffer concentration and pH value as well as the applied voltage on the separation were investigated. It has been shown that the electrostatic interaction between the positively charged peptides and the SCX stationary phase played a very important role in IE-CEC, which provided the different separation selectivity from those in the capillary electrophoresis and reversed-phase liquid chromatography. A fast separation of ten peptides in less than 3.5 min on IE-CEC by adoption of the highly applied voltage was demonstrated. (C) 2000 Elsevier Science B.V. All rights reserved.

Effects of organic modifiers on solute retention and electrokinetic migrations in micellar electrokinetic capillary chromatography

Influences of seven organic modifiers, including urea, methanol (MeOH), dioxane (DIO), tetrahydrofuran (THF), acetonitrile (ACN), 1-propanol (1-PrOH) and 2-propanol (2-PrOH), on the solute retention and the electrokinetic migrations in micellar electrokinetic capillary chromatography (MEKC) are investigated with sodium dodecyl sulfate (SDS) micelle as pseudostationary phase. It is observed that in the limited concentration ranges used in the MEKC systems the effect of organic modifier concentration on the retention can be described by the equation logk'=logk'(w)-SC for most binary aqueous-organic buffer, but deviations from this retention equation are observed at ACN and particularly THF as organic modifiers. With parameter S as a measure of the elutropic strength, the elutropic strength of the organic modifiers is found to follow a general order urea buffer composition used, while the addition of the other modifiers leads to a rough linear decrease of the electrophoretic mobility of the SDS micelle. The suppressing strength of THF on the electrophoretic mobility of the SDS micelle is strongly related to the buffer composition, whereas the suppressing strength for the other modifiers follows the sequence urea < MeOH < DIO, 1-PrOH, 2-PrOH. The migration time window is expanded by the use of organic modifiers. Urea and MeOH have the least expanding strength while ACN, DIO, THF, 1-PrOH and 2-PrOH have the highest expanding strength on the migration time window.

Capillary electrophoresis study of human serum albumin binding to basic drugs

The applicability of capillary electrophoresis/frontal analysis (CE/FA) for determining the binding constants of the drugs propranolol (PRO) and verapamil (VER) to human serum albumin (HSA) was investigated. After direct hydrodynamic injection of a drug-HAS mixture solution into a coated capillary (32 cm x 50 mu m i.d.), the basic drug was eluted as a zonal peak with a plateau region under condition of phosphate buffer (pH 7.4; ionic strength 0.17) at 12 kV positive running voltage. The unbound drug concentrations measured from the plateau peak heights had good correlation coefficients, r > 0.999. Employing the Scatchard plot, the Klotz plot and nonlinear regression, the drug protein binding parameters, the binding constant and the number of binding sites on one protein molecule, were obtained. The binding constant obtained was compared to a reported equilibrium dialysis result and they are basically in good agreement.

Study of interaction between drug enantiomers and serum albumin by capillary electrophoresis

The interaction between drugs and human serum albumin (HSA) was investigated by capillary electrophoresis (CE). It involves stereoselectivity, drug displacement and synergism effects. Under protein-drug binding equilibrium, the unbound concentrations of drug enantiomers were measured by frontal analysis (FA). The stereoselectivity of verapamil (VER) binding to HSA was proved by the different free fractions of two enantiomers. In physiological pH (7.4, ionic strength 0.17 phosphate buffer) when 300 mu M (+/-) VER were equilibrated with 500 mu M HSA, the concentration of unbound S-VER was about 1.7 times its antipode. The binding constants of two enantiomers, KR-VER and KS-VER, were 2670 and 850 M-1, respectively. However, no obvious stereoselective binding of propranolol (PRO) to HSA was observed. Trimethyl-beta-cyclodextrin (45 mM) was used as a chiral selector in pH 2.5 phosphate buffer. Several drug systems were studied by the method. When ibuprofen (IBU) was added into VER-HSA solution. R-VER was partially displaced while S-VER was not displaced at all. A binding synergism effect between bupivacaine (BUP) and verapamil was observed and further study suggested that verapamil and bupivacaine occupy different binding site of HSA (site II and site III, respectively).

Bilirubin-human serum albumin interaction monitored by capillary zone electrophoresis

Capillary zone electrophoresis was used to monitor the interaction between bilirubin and human serum albumin. Cord blood serum samples were injected directly into an uncoated fused-silica capillary (30 cm x 50 mu m i.d.) and separation was accomplished within 4 min without extensive sample pretreatment. The most suitable running buffer to separate free bilirubin from albumin bound bilirubin was found to contain 1.0 mmol/L EDTA, 5% acetonitrile and 15 mmol/L phosphate with pH adjusted to 8.4. Approximately two bilirubin dianions could be bound per human serum albumin molecule in the cord blood serum. The binding constant was estimated to be 1.1 x 10(5) (L/mol) at 25 degrees C and pH 8.4. The peak area ratio of free bilirubin to total bilirubin can be used to determine the bilirubin binding capacity of cord blood serum for the concentration range of total bilirubin from 204 to 340 mu mol/L using 1:5 diluted cord blood seras. Copyright (C) 1999 John Wiley & Sons, Ltd.

Optimization and parameter study for chiral separation by capillary electrophoresis

Orthogonal design and uniform design were used for the optimization of separation of enantiomers using 2,6-di-O-methyl-beta-cyclodextrin (DM-beta-CD) as a chiral selector by capillary zone electrophoresis, The concentration of DM-beta-CD, buffer pH, running voltage, and capillary temperature were selected as variable parameters, their different effects on peak resolution were studied by the design methods. It was concluded that orthogonal design offers a rapid and efficient means for testing the importance of individual parameters and for determining the optimum operating conditions. However, for a large number of both factors and levels, uniform design is more efficient, The effect of addition of methanol and citric acid buffer on the separation of enantiomers was also examined.

序列视觉信息整合的特性与机制

One of the great puzzles in the psychology of visual perception is that the visual world appears to be a coherent whole despite our viewing it through temporally discontinuous series of eye fixations. The investigators attempted to explain this puzzle from the perspective of sequential visual information integration. In recent years, investigators hypothesized that information maintained in the visual short-term memory (VSTM) could become visual mental images gradually during time delay in visual buffer and integrated with information perceived currently. Some elementary studies had been carried out to investigate the integration between VSTM and visual percepts, but further research is required to account for several questions on the spatial-temporal characteristics, information representation and mechanism of integrating sequential visual information. Based on the theory of similarity between visual mental image and visual perception, this research (including three studies) employed the temporal integration paradigm and empty cell localization task to further explore the spatial-temporal characteristics, information representation and mechanism of integrating sequential visual information (sequential arrays). The purpose of study 1 was to further explore the temporal characteristics of sequential visual information integration by examining the effects of encoding time of sequential stimuli on the integration of sequential visual information. The purpose of study 2 was to further explore the spatial characteristics of sequential visual information integration by investigating the effects of spatial characteristics change on the integration of sequential visual information. The purpose of study 3 was to explore the information representation of information maintained in the VSTM and integration mechanism in the process of integrating sequential visual information by employing the behavioral experiments and eye tracking technology. The results indicated that: (1) Sequential arrays could be integrated without strategic instruction. Increasing the duration of the first array could cause improvement in performance and increasing the duration of the second array could not improve the performance. Temporal correlation model was not fit to explain the sequential array integration under long-ISI conditions. (2) Stimuli complexity influenced not only the overall performance of sequential arrays but also the values of ISI at asymptotic level of performance. Sequential arrays still could be integrated when the spatial characteristics of sequential arrays changed. During ISI, constructing and manipulating of visual mental image of array 1 were two separate processing phases. (3) During integrating sequential arrays, people represented the pattern constituted by the objects' image maintained in the VSTM and the topological characteristics of the objects' image had some impact on fixation location. The image-perception integration hypothesis was supported when the number of dots in array 1 was less than empty cells, and the convert-and-compare hypothesis was supported when the number of the dot in array 1 was equal to or more than empty cells. These findings not only contribute to make people understand the process of sequential visual information integration better, but also have significant practical application in the design of visual interface.

Otimização de protocolo para análise de AFLP em Lolium multiflorum Lam.

ESTABELECIMENTO DE METODOLOGIA PARA ANÁLISE MOLECULAR DE AZEVÉM ANUAL COM MARCADORES AFLP. O uso de marcadores moleculares no manejo de bancos de germoplasma tem sido cada vez mais expressivo. Entre os diferentes tipos de marcadores moleculares, o AFLP, Amplified Fragment Length Polymorphism, apresenta algumas vantagens para uso na caracterização de recursos genéticos, como a detecção de grande número de bandas informativas por reação, com ampla cobertura do genoma e considerável reprodutibilidade, além de não necessitar de dados de seqüenciamento prévio da espécie para a construção de primers. Embora a análise de AFLP seja freqüentemente utilizada em estudos de variabilidade genética em diferentes espécies, o uso da técnica em Lolium multiflorum ainda é incipiente. Com a finalidade de estabelecer um protocolo para o emprego da técnica de AFLP em azevém anual foi conduzido este trabalho. Foram avaliadas as concentrações iniciais de DNA genômico de 100 e 250 ng, a digestão do DNA com 1,25 e 1U das enzimas EcoRI e MSe, e os respectivos tempos de reação de digestão: 3, 6 e 12 horas. Também foram avaliadas quatro concentrações da solução resultante da ligação dos adaptadores: solução sem diluição; diluída 1:5; 1:10 e 1:20 e duas diluições após a reação de pré-amplificação, de 1:25 e 1:50. Como resultado, foi estabelecido como melhor protocolo, no qual foi obtido um maior número e qualidade de fragmentos, o que utiliza a concentração inicial de DNA genômico de 100 ng, num volume final de reação de digestão 10 ?l, com 1U de cada enzima EcoRI e MseI e tempo de reação de 12h a 37°C, com reação de ligação de adaptadores realizada com a adição da solução de ligação de adaptadores, do Kit AFLP? Analysis System I (InvitroGen Life Technologies, Carlsbad, Calif., USA), e 0,4 U de T4 DNA ligase em um volume final de 10?l, por 2h a 20°C. Após a ligação de adaptadores a diluição deverá ser de 1:5. A reação de pré-amplificação deverá ocorrer a partir de 1?l desta última solução (diluída 1:5), 1,0 X PCR buffer com Mg Plus [Tris-HCl (pH 7.6) 20 mM, MgCl2 1,5 mM, KCl 50 mM], BSA 0,003% e 1 U de Taq DNA polimerase, completando com mix de pré-amplificação do Kit AFLP? Analysis System I até alcançar o volume final de 11?l. O produto da pré-amplificação deverá ser diluído 1:25 antes de ser procedida à amplificação seletiva, a qual deve ser realizada utilizando 2,5 ?l da solução de DNA pré-amplificado (diluído 1:25), 1 X PCR buffer com Mg Plus [Tris-HCl (pH 8,4) 20 mM, MgCl2 1,5 mM, KCl 50 mM], BSA (0,003%), 1 U de Taq DNA polimerase, 10 ng de primer EcoRI, 1,5 ng de primer MseI, 0,4mM de DNTps e H2O MilliQ? até completar o volume final de 10?l. Com este protocolo uma única combinação de primers permitiu identificar 58 bandas polimórficas na análise de duas populações de azevém anual.

Explanation of Big "P" as of March 20, 1959

ERROR is a routine to provide a common location for all routines. Its celling sequence is: SXD SERROR,4 TSX SERROR+1,4 The above is normally followed immediately by up to 20 registers of BCD remarks terminated by a word of 1's. This may be left out, however. ERROR prints out the remark, if any, the location of the TSX that entered error, restores the console except for the AC overflow, and transfers to the user's error routine specified by the calling sequence of SETUP.

Synthesis of a terbium fluorescent chelate and its application to time-resolved fluoroimmunoassay

A new nonadentate ligand, N, N, N-1, N-1-[2,6-bis(3'-aminomethyl-1 1'-pyrazolyl)-4-phenylpyridine]tetrakis(acetic acid) (BPTA) for a Tb3+ fluorescent complex was synthesized. The Tb3+ complex is strongly fluorescent, having a large fluorescence quantum yield of 1.00 and very long fluorescence lifetime of 2.681 ms in 0.05 M berate buffer of pH 9.1. Streptavidin (SA) was labeled with SPTA by using its succinimidyl monoester, and the BPTA-Tb3+-labeled SA was used in sandwich-type time-resolved fluoroimmunoassay (TR-FIA) of alpha -fetoprotein (AFP) and carcinoembryonic antigen (CEA) in human sera. The Tb3+-labeled SA was also used in competitive type TR-FIA of bensulfuron- methyl (BSM) in water. The detection limits of these assays are 42 pg/mL for AFP, 70 pg/mL for CEA, and 0.4 ng/mL for BSM. In addition, a new simultaneous measurement method for AFP and CEA in a human serum sample was developed by using 4,4'-bis(1 " ,1 " ,1 " ,2 " ,2 " ,3 " ,3 " -heptafluoro-4 " ,6 " -hexanedion-6 " -yl)chlorosulfo-o-terphenyl ((BHHCT)-Eu3+-labeled anti-AFP antibody, biotinylated anti-CEA antibody, and BPTA-Tb3+-labeled SA. The concentrations of AFP and CEA in 39 human serum samples were determined, and the results were compared with those of the independently determined AFP and CEA by TR-FIA with a single-label method. A good correlation was obtained with the correlation coefficients of 0.991 for AFP and 0.994 for CEA.

Simultaneous and ultrarapid determination of reactive oxygen species and reduced glutathione in apoptotic leukemia cells by microchip electrophoresis

A microchip electrophoresis method coupled with laser-induced fluorescence (LIF) detection was established for simultaneous determination of two kinds of intracellular signaling molecules (reactive oxygen species, ROS, and reduced glutathione, GSH) related to apoptosis and oxidative stress. As the probe dihydrorhodamine-123 (DHR123) can be converted intracellularly by ROS to the fluorescent rhodamine-123 (Rh123), and the probe naphthalene-2,3-dicarboxaldehyde (NDA) can react quickly with GSH to produce a fluorescent adduct, rapid determination of Rh-123 and GSH was achieved on a glass microchip within 27 s using a 20 mm borate buffer (pH 9.2). The established method was tested to measure the intracellular ROS and GSH levels in acute promyelocytic leukemia (APL)-derived NB4 cells. An elevation of intracellular ROS and depletion of GSH were observed in apoptotic N134 cells induced by arsenic trioxide (AS(2)O(3)) at low concentration (1-2 mu m). Buthionine sulfoximine (BSO), in combination with AS(2)O(3) enhanced the decrease of reduced GSH to a great extent. The combined treatment of AS(2)O(3) and hydrogen peroxide (H2O2) led to an inverse relationship between the concentrations of ROS and GSH obtained, showing the proposed method can readily evaluate the generation of ROS, which occurs simultaneously with the consumption of the inherent antioxidant.

Analysis of phenols by high-performance liquid chromatography with pre-column derivatization by 2-(9-carbazole)-ethyl-chloroformate

2-(9-Carbazole)-ethyl-chloroformate (CEOC), a novel pre-column fluorescence labeling reagent, has been synthesized and applied for the derivatization of phenols. Taken phenol, p-chlorophenol, 2,5-dimethylphenol, 2,4-dichlorophenol and 1,4-dihydroxybenzene as testing standards, the effects of derivatization conditions, such as pH of borate buffer, reaction time and fluorescent tagging reagent concentration, have been systematically studied. Under the optimized conditions, CEOC reacts readily with the phenols to form stable derivatives with excitation and emission wavelengths, respectively, at 293 and 360 nm. The single step derivatization reaction could be finished within 20 min even at room temperature. Such a method has been successfully applied to the analysis of phenols in printing ink by high-performance liquid chromatography. (c) 2005 Elsevier B.V. All rights reserved.

Determination of dissociation constants of Strychnos alkaloids from Strychnos nux-vomica L. by capillary electrophoresis

An accurate capillary electrophoresis method was developed for the determination of dissociation constants of five Strychnos alkaloids from Strychnos nux-vomica L. The method relies on measuring the effective mobility of the solute as a function of the buffer pH. The mathematical relationship was strictly derived from the fundamental electrophoresis theory and the dissociation equilibrium of a weak base without any simplifications. Careful optimization of the running buffer permitted base-line resolution of the five structurally similar alkaloids.