Automated sugar analysis

Abstract Sugarcane monosaccharides are reducing sugars, and classical analytical methodologies (Lane-Eynon, Benedict, complexometric-EDTA, Luff-Schoorl, Musson-Walker, Somogyi-Nelson) are based on reducing copper ions in alkaline solutions. In Brazil, certain factories use Lane-Eynon, others use the equipment referred to as “REDUTEC”, and additional factories analyze reducing sugars based on a mathematic model. The objective of this paper is to understand the relationship between variations in millivolts, mass and tenors of reducing sugars during the analysis process. Another objective is to generate an automatic model for this process. The work herein uses the equipment referred to as “REDUTEC”, a digital balance, a peristaltic pump, a digital camcorder, math programs and graphics programs. We conclude that the millivolts, mass and tenors of reducing sugars exhibit a good mathematical correlation, and the mathematical model generated was benchmarked to low-concentration reducing sugars (<0.3%). Using the model created herein, reducing sugars analyses can be automated using the new equipment.

Separation of lignin in Pulp Mill process and its effect on sodium sulphur balance

The aim of this thesis is to define effects of lignin separation process on Pulp mill chemical balance especially on sodium/sulphur-balance. The objective is to develop a simulation model with WinGEMS Process Simulator and use that model to simulate the chemical balances and process changes. The literature part explains what lignin is and how kraft pulp is produced. It also introduces to the methods that can be used to extract lignin from black liquor stream and how those methods affect the pulping process. In experimental part seven different cases are simulated with the created simulation model. The simulations are based on selected reference mill that produces 500 000 tons of bleached air-dried (90 %) pulp per year. The simulations include the chemical balance calculation and the estimated production increase. Based on the simulations the heat load of the recovery boiler can be reduced and the pulp production increased when lignin is extracted. The simulations showed that decreasing the waste acid stream intake from the chlorine dioxide plant is an effective method to control the sulphidity level when about 10 % of lignin is extracted. With higher lignin removal rates the in-mill sulphuric acid production has been discovered to be a better alternative to the sulphidity control.

Implementing the OPTIMAL model : the impact on students' motivation in an elementary school games environment

Optimal challenge occurs when an individual perceives the challenge of the task to be equaled or matched by his or her own skill level (Csikszentmihalyi, 1990). The purpose of this study was to test the impact of the OPTIMAL model on physical education students' motivation and perceptions of optimal challenge across four games categories (i. e. target, batting/fielding, net/wall, invasion). Enjoyment, competence, student goal orientation and activity level were examined in relation to the OPTIMAL model. A total of 22 (17 M; 5 F) students and their parents provided informed consent to take part in the study and were taught four OPTIMAL lessons and four non-OPTIMAL lessons ranging across the four different games categories by their own teacher. All students completed the Task and Ego in Sport Questionnaire (TEOSQ; Duda & Whitehead, 1998), the Intrinsic Motivation Inventory (IMI; McAuley, Duncan, & Tanmien, 1987) and the Children's Perception of Optimal Challenge Instrument (CPOCI; Mandigo, 2001). Sixteen students (two each lesson) were observed by using the System for Observing Fitness Instruction Time tool (SOFTT; McKenzie, 2002). As well, they participated in a structured interview which took place after each lesson was completed. Quantitative results concluded that no overall significant difference was found in motivational outcomes when comparing OPTIMAL and non-OPTIMAL lessons. However, when the lessons were broken down into games categories, significant differences emerged. Levels of perceived competence were found to be higher in non-OPTIMAL batting/fielding lessons compared to OPTIMAL lessons, whereas levels of enjoyment and perceived competence were found to be higher in OPTIMAL invasion lessons in comparison to non-OPTIMAL invasion lessons. Qualitative results revealed significance in feehngs of skill/challenge balance, enjoyment and competence in the OPTIMAL lessons. Moreover, a significance of practically twice the active movement time percentage was found in OPTIMAL lessons in comparison to non-OPTIMAL lessons.

Calculation of the optical conductivity for the Anderson impurity model using the slave boson technique

The optical conductivity of the Anderson impurity mode l has been calculated by emp l oying the slave boson technique and an expansion in powers of l i N, where N is the d egeneracy o f the f electron level . This method has been used to find the effective mass of the conduction electrons for temperatures above and below the Kondo tempera ture. For low temperatures, the mass enhancement is f ound to be large while a t high t emperatures, the mass enhancement is sma ll. The conductivity i s f ound to be Drude like with frequency dependent effective mass and scattering time for low independent effective mass and temperatures and scattering time f requency for high t emperatures. The behavior of both the effective mass and the conductivity is in qualitative agreement with experimental r esul t s .

ESI-MS[n] of anticancer pt[iv] organoamido complexes and their interactions with DNA-model compounds /

The general solution behaviour and" the major fragmentation pathways of the anticanceractive PtIV coordination complexes, trans, trans, cis, cis-[PtCIOH{N(pFC6F4) CH2h(pY)2] (1), trans, cis, cis-[Pt(OH)2{N(p-FC6F4)CH2h(Py)2] (2), trans, cis, cis-[Pt(OH)2{N(p-HC6F4)CH2h(Py)2] (3), trans, trans, cis, cis-[PtCIOH{N(pHC6F4) CH2h(Py)2] (4), and trans, trans, cis, cis-[PtOH(OCH3){N(p-HC6F4)CH2h(PY)2] (5) (Py = pyridine) have been deduced by positive-ion tandem-in-time ESI-MS. Overall, the acquired full-scan, positive-ion ESI-MS spectra of 2, 3, and 5 were characterized by the presence of relatively low-intensity [M+Nar and [M+Kt mass spectral peaks, whereas those of 1 and 4 were dominated by extremely intense [M+Hr peaks. Complexes 2 and 3 were also noted to form [2M+Ht and [2M+Nat dilneric cations. The source of Na + and K+ ions is believed to be the sample, the solvent systems used or the transport line carrying the sample solutions into the ES ion source. Further, the fragmentation pathway of all complexes studied was found to be almost identical with concurrent loss of py and H20 molecules, loss of a {N(p-YC6F4)CH2} (Y = F, H) group and/or concomitant release of the latter group and a py ligand being the most conunon. The photochemical degradation behaviour of 1 and 2 was also investigated using either fluorescent or ultraviolet light and some products of that degradation were positively identified. Altogether, light irradiation of solutions of both complexes resulted in cation cationisation, reductive-elimination, ligand-release, ligand-exchange and ligand-addition reactions. Finally, positive- and negative-ion ESI-MSn spectra of 5' -GMP, guanosine, inosine and products of their reactions with 1, 2,3, and 4 were also recorded. On the whole, full-scan ESI-MS spectra of the pure nucleobases revealed the presence of cationic and anionic species that are highly reflective of both their solution ionic composition and their propensity t9 form polymeric clusters. Analyses of mass spectra acquired from their reaction solutions with the aforementioned platinum complexes indicated very slow kinetics. However, all complexes investigated formed, to various degrees, Pt-nucleobase adducts with guanosine and inosine, but not with 5'-GMP. The products included species having coordination numbers of III, IV, V, and VI, among which the first-time· observed, coordinatively saturated, jive-coordinate PtlI-nucleobase complexes were of most interest. The latter complexes are presumably stabilized by 7tback- donation involving the filled d orbitals of the PtII centre and the empty pz· orbital of MeCN. All products, whose peaks appeared inlull-scan ESI-MS spectra, are believed to represent solution species rather than artifacts of gas-phase processes. Finally, negativeion ESI-MSn spectra recorded in reaction solutions of 1 and 4 with guanosine and of the latter complex with inosine revealed the negative-ion-ESI-MS first-time observed, noncovalent, nucleoside-chloride adducts, with the source of chloride anion being complexes 1 and 4 theillselves. In contrast, no such adducts were observed to form with Na25'-GMP or its protonated fonn. Few suggestions are offered for the possible cause(s) behind the absence of such adduct ions.

The relationship between body mass index and breast cancer recurrence/progression and breast cancer-specific death

The aim of this study was to describe the nonlinear association between body mass index (BMI) and breast cancer outcomes and to determine whether BMI improves prediction of outcomes. A cohort of906 breast cancer patients diagnosed at Henry Ford Health System, Detroit (1985-1990) were studied. The median follow-up was 10 years. Multivariate logistic regression was used to model breast cancer recurrence/progression and breast cancer-specific death. Restricted cubic splines were used to model nonlinear effects. Receiver operator characteristic areas under the curves (ROC AUC) were used to evaluate prediction. BMI was nonlinearly associated with recurrence/progression and death (p= 0.0230 and 0.0101). Probability of outcomes increased with increase or decrease ofBMI away from 25. BMI splines were suggestive of improved prediction of death. The ROC AUCs for nested models with and without BMI were 0.8424 and 0.8331 (p= 0.08). I f causally associated, modifying patients BMI towards 25 may improve outcomes.

Intégration du concept de capacité de support d’un plan d’eau aux apports en phosphore à l’aménagement du territoire au Québec : Réalité ou utopie?

Ce mémoire a comme objectif de présenter une revue de la littérature et une analyse comparative des différents modèles existants pour le calcul de la capacité de support d’un plan d’eau aux apports en phosphore. Ce document a aussi pour but d’évaluer les différentes options pour l’utilisation de ce genre d’outil au Québec, ainsi que d’amorcer une réflexion sur les applications possibles de ce concept au niveau local, en lien avec l’aménagement du territoire des bassins versants. L’analyse comparative des modèles théoriques, combinée à la réflexion d’acteurs clés impliqués actuellement dans un processus qui consiste à tester leur utilisation dans les Laurentides au Québec, a permis de mettre en relief l’importance de calibrer les modèles régionalement. De plus, certains avantages semblent résider dans l’utilisation d’un modèle de nature empirique afin d’effectuer les prédictions sur les apports naturels et totaux en phosphore pour les lacs de cette région. Par contre, l’utilisation d’une approche de type « bilan de masse », s’avère tout de même indispensable afin de relativiser l’importance des différents apports anthropiques en phosphore du bassin versant. Dans l’avenir, l’utilisation de tels modèles permettra possiblement de justifier certaines mesures restrictives au développement des bassins versants, qui pourront s’insérer parmi les outils d’urbanisme actuels. Ce sont principalement les municipalités qui détiennent les pouvoirs nécessaires afin d’intégrer les prescriptions découlant de ce genre d’analyse à l’aménagement du territoire des bassins versants. Plusieurs outils d’urbanisme, tels que les plans d’aménagement d’ensemble (PAE) ou bien les règlements de zonage et de lotissement, semblent donner assez de latitude afin de permettre aux municipalités d’intervenir en ce sens. Toutefois, les modèles de capacité de support ne pourront pas être utilisés afin de calculer un nombre précis d’habitations qu’il est possible de construire dans le bassin versant d’un lac.

Impact of (pro)renin receptor deficiency in adipose tissue using a genetically engineered mouse model

La stimulation du récepteur de la rénine/prorénine [(P) RR], un membre récemment découvert du système rénine-angiotensine (SRA), augmente l'activité du SRA et des voies de signalisation angiotensine II-indépendante. Pour étudier l'impact potentiel du (P)RR dans le développement de l`obésité, nous avons émis l'hypothèse que les souris déficientes en (P)RR uniquement dans le tissus adipeux (KO) auront une diminution du poids corporel en ciblant le métabolisme du tissu adipeux, l'activité locomoteur et/ou la prise alimentaire. Ainsi, des souris KO ont été générées en utilisant la technologie Cre/Lox. Le gain de poids et la prise alimentaire ont été évalués hebdomadairement dans les mâles et femelles KO et de type sauvage (WT) pendant 4 semaines alors qu’ils étaient maintenu sur une diète normal. De plus, un groupe de femelles a été placé pour 6 semaines sur une diète riche en gras et en glucides (HF/HC). La composition corporelle et l'activité ambulatoire ont été évaluées par l’EchoMRI et à l’aide de cages Physioscan, respectivement. Les tissus adipeux ont été prélevés et pesés. De plus, les gras péri-gonadaux ont été utilisés pour le microarray. Finalement, le niveaux d'expression d'ARNm du (P)RR ont été évalués. Comme le gène du (P)RR est situé sur le chromosome X, les mâles étaient des KOs complets et les femelles étaient des KOs partielles. Les souris KO avaient un poids corporel significativement plus petit par rapport à WT, les différences étant plus prononcées chez les mâles. De plus, les femelles KOs étaient résistantes à l'obésité lorsqu'elles ont été placées sur la diète HF/HC et donc elles avaient significativement moins de masse grasse par rapport aux WTs. L’analyse histologique des gras péri-gonadaux des KOs nous ont dévoilés qu’il avait une réduction du nombre d'adipocytes mais de plus grande taille. Bien qu'il n'y ait eu aucun changement dans la consommation alimentaire, une augmentation de près de 3 fois de l'activité ambulatoire a été détectée chez les mâles. De plus, nous avons observé que leurs tibias étaient de longueur réduite ce qui suggère fortement l'affection de leur développement. Les gras péri-gonadaux des souris KO avaient une expression réduite de l`ABLIM2 (Actin binding LIM protein family, member 2) qui est associé avec le diabète de type II chez l'humain. Ainsi, les données recueillies suggèrent fortement que le (P)RR est impliquée dans la régulation du poids corporelle.

Quantifying diffusion in biofilms : from model hydrogels to living biofilms

Les biofilms sont des communautés de microorganismes incorporés dans une matrice exo-polymérique complexe. Ils sont reconnus pour jouer un rôle important comme barrière de diffusion dans les systèmes environnementaux et la santé humaine, donnant lieu à une résistance accrue aux antibiotiques et aux désinfectants. Comme le transfert de masse dans un biofilm est principalement dû à la diffusion moléculaire, il est primordial de comprendre les principaux paramètres influençant les flux de diffusion. Dans ce travail, nous avons étudié un biofilm de Pseudomonas fluorescens et deux hydrogels modèles (agarose et alginate) pour lesquels l’autodiffusion (mouvement Brownien) et les coefficients de diffusion mutuels ont été quantifiés. La spectroscopie par corrélation de fluorescence a été utilisée pour mesurer les coefficients d'autodiffusion dans une volume confocal de ca. 1 m3 dans les gels ou les biofilms, tandis que les mesures de diffusion mutuelle ont été faites par cellule de diffusion. En outre, la voltamétrie sur microélectrode a été utilisée pour évaluer le potentiel de Donnan des gels afin de déterminer son impact sur la diffusion. Pour l'hydrogel d'agarose, les observations combinées d'une diminution du coefficient d’autodiffusion et de l’augmentation de la diffusion mutuelle pour une force ionique décroissante ont été attribuées au potentiel de Donnan du gel. Des mesures de l'effet Donnan (différence de -30 mV entre des forces ioniques de 10-4 et 10-1 M) et l'accumulation correspondante d’ions dans l'hydrogel (augmentation d’un facteur de 13 par rapport à la solution) ont indiqué que les interactions électrostatiques peuvent fortement influencer le flux de diffusion de cations, même dans un hydrogel faiblement chargé tel que l'agarose. Curieusement, pour un gel plus chargé comme l'alginate de calcium, la variation de la force ionique et du pH n'a donné lieu qu'à de légères variations de la diffusion de sondes chargées dans l'hydrogel. Ces résultats suggèrent qu’en influençant la diffusion du soluté, l'effet direct des cations sur la structure du gel (compression et/ou gonflement induits) était beaucoup plus efficace que l'effet Donnan. De même, pour un biofilm bactérien, les coefficients d'autodiffusion étaient pratiquement constants sur toute une gamme de force ionique (10-4-10-1 M), aussi bien pour des petits solutés chargés négativement ou positivement (le rapport du coefficient d’autodiffusion dans biofilm sur celui dans la solution, Db/Dw ≈ 85 %) que pour des nanoparticules (Db/Dw≈ 50 %), suggérant que l'effet d'obstruction des biofilms l’emporte sur l'effet de charge. Les résultats de cette étude ont montré que parmi les divers facteurs majeurs qui affectent la diffusion dans un biofilm environnemental oligotrophe (exclusion stérique, interactions électrostatiques et hydrophobes), les effets d'obstruction semblent être les plus importants lorsque l'on tente de comprendre la diffusion du soluté. Alors que les effets de charge ne semblaient pas être importants pour l'autodiffusion de substrats chargés dans l'hydrogel d'alginate ou dans le biofilm bactérien, ils ont joué un rôle clé dans la compréhension de la diffusion à travers l’agarose. L’ensemble de ces résultats devraient être très utiles pour l'évaluation de la biodisponibilité des contaminants traces et des nanoparticules dans l'environnement.

Les mécanismes de régulation du métabolisme lipidique par les peptides QRFP (pyroglutamylated RF-amide peptides)

Plusieurs cibles thérapeutiques dans le développement de médicaments contre l’obésité visent une diminution de l’appétit et de la masse adipeuse et à augmenter la dépense énergétique. L’appétit et le métabolisme énergétique sont régulés par certains neuropeptides qui agissent au niveau du système nerveux central, notamment dans l’hypothalamus. Parmi ces neuropeptides, les peptides RF-amide ou QRFP (pyroglutamylated RF-amide peptides), ainsi nommés par la présence du motif conservé Arg-Phe-NH2 dans le domaine C-terminal, induisent une hyperphagie et une augmentation de la masse adipeuse lorsqu’administrés par voie centrale. Les formes bioactives de ces peptides comprennent principalement 43 (QRFP-43) et 26 (QRFP-26) acides aminés. Outre les peptides QRFP, leurs récepteurs, les GPR103 de la famille des récepteurs à 7 passages transmembranaires couplés aux protéines G, sont exprimés dans l’hypothalamus. Plus récemment, des études ont montré la sécrétion de ces neuropeptides, et la présence du GPR103, dans le tissu adipeux. Cependant, le rôle de la voie signalétique (QRFP/GPR103) dans la régulation du métabolisme lipidique au niveau périphérique est peu connu. Les travaux de cette thèse ont porté sur la caractérisation des effets adipogéniques périphériques des neuropeptides QRFP. En premier lieu, nos travaux ont montré que les adipocytes 3T3-L1 et les adipocytes murins isolés des dépôts adipeux blancs expriment le prépro-QRFP et uniquement le récepteur GPR103B, un des deux sous-types de récepteurs présents chez la souris. De plus, nous avons montré que l’expression du récepteur est régulée par une diète riche en lipides réduisant l’expression du prépro-QRFP, mais augmentant celle du GPR103B dans les dépôts lipidiques. Chez l’humain, les adipocytes de l’omentum expriment autant le GPR103 que le prépro-QRFP. Nous avons de plus étudié la fonctionnalité du GPR103B dans les adipocytes 3T3-L1 par l’utilisation d’ARN interférents. Nous avons observé que ce récepteur médie les effets adipogéniques des QRFPs en augmentant l’expression du récepteur nucléaire PPAR-gamma (peroxisome proliferator-activated receptor gamma) et le facteur de transcription C/EBP-alpha (CCAAT-enhancer binding protein alpha) résultant en une accumulation des triglycérides. Nous avons aussi mis en évidence les effets anti-lipolytiques des QRFPs. En effet, les QRFP inhibent fortement la lipolyse induite avec l’isoprotérénol. L’étude des mécanismes moléculaires à l’origine des effets anti-lipolytiques du QRFP-43 a montré l’activation de la voie de signalisation PI3-K/PKB (phosphatidylinositol 3-kinase/protéine kinase B) en réponse à la stimulation du GPR103B. La réponse anti-lipolytique induite par le QRFP-43 est associée à une diminution de la phosphorylation de la périlipine A (PLIN1a) et de la lipase hormono-sensible (HSL). Nos études ont élucidé les mécanismes conduisant à l’inhibition de la phosphorylation de la PLIN1a en réponse à l’activation du GPR103B, impliquant l’inhibition de la migration de la cavéoline 1 et de la sous unité catalytique de la protéine kinase A (PKA) au niveau des gouttelettes lipidiques, ainsi que l’inhibition de l’activité des Src kinases et de la protéine kinase C (PKC). En conclusion, nos travaux ont montré que les QRFP-43 et -26 exercent un effet adipogénique et anti-lipolytique dans les adipocytes, mettant ainsi en évidence le rôle des neuropeptides QRFPs dans la régulation du métabolisme lipidique au niveau adipocytaire.

Studies on Pseudoscalar Meson Bound States and Semileptonic Decays in a Relativistic Potential Model

In this thesis quark-antiquark bound states are considered using a relativistic two-body equation for Dirac particles. The mass spectrum of mesons includes bound states involving two heavy quarks or one heavy and one light quark. In order to analyse these states within a unified formalism, it is desirable to have a two-fermion equation that limits to one body Dirac equation with a static interaction for the light quark when the other particle's mass tends to infinity. A suitable two-body equation has been developed by Mandelzweig and Wallace. This equation is solved in momentum space and is used to describe the complete spectrum of mesons. The potential used in this work contains a short range one-gluon exchange interaction and a long range linear confining and constant potential terms. This model is used to investigate the decay processes of heavy mesons. Semileptonic decays are more tractable since there is no final state interactions between the leptons and hadrons that would otherwise complicate the situation. Studies on B and D meson decays are helpful to understand the nonperturbative strong interactions of heavy mesons, which in turn is useful to extract the details of weak interaction process. Calculation of form factors of these semileptonic decays of pseudo scalar mesons are also presented.

Closure of the Monte Carlo dynamical equation in the spherical Sherrington-Kirkpatrick model

We study the analytical solution of the Monte Carlo dynamics in the spherical Sherrington-Kirkpatrick model using the technique of the generating function. Explicit solutions for one-time observables (like the energy) and two-time observables (like the correlation and response function) are obtained. We show that the crucial quantity which governs the dynamics is the acceptance rate. At zero temperature, an adiabatic approximation reveals that the relaxational behavior of the model corresponds to that of a single harmonic oscillator with an effective renormalized mass.

Superheavy nuclei in relativistic effective Lagrangian model

Isotopic and isotonic chains of superheavy nuclei are analyzed to search for spherical double shell closures beyond Z=82 and N=126 within the new effective field theory model of Furnstahl, Serot, and Tang for the relativistic nuclear many-body problem. We take into account several indicators to identify the occurrence of possible shell closures, such as two-nucleon separation energies, two-nucleon shell gaps, average pairing gaps, and the shell correction energy. The effective Lagrangian model predicts N=172 and Z=120 and N=258 and Z=120 as spherical doubly magic superheavy nuclei, whereas N=184 and Z=114 show some magic character depending on the parameter set. The magicity of a particular neutron (proton) number in the analyzed mass region is found to depend on the number of protons (neutrons) present in the nucleus.

Studies on Advanced Oxidation Processes for the Removal of Acetamiprid from Wastewater

Pollution of water with pesticides has become a threat to the man, material and environment. The pesticides released to the environment reach the water bodies through run off. Industrial wastewater from pesticide manufacturing industries contains pesticides at higher concentration and hence a major source of water pollution. Pesticides create a lot of health and environmental hazards which include diseases like cancer, liver and kidney disorders, reproductive disorders, fatal death, birth defects etc. Conventional wastewater treatment plants based on biological treatment are not efficient to remove these compounds to the desired level. Most of the pesticides are phyto-toxic i.e., they kill the microorganism responsible for the degradation and are recalcitrant in nature. Advanced oxidation process (AOP) is a class of oxidation techniques where hydroxyl radicals are employed for oxidation of pollutants. AOPs have the ability to totally mineralise the organic pollutants to CO2 and water. Different methods are employed for the generation of hydroxyl radicals in AOP systems. Acetamiprid is a neonicotinoid insecticide widely used to control sucking type insects on crops such as leafy vegetables, citrus fruits, pome fruits, grapes, cotton, ornamental flowers. It is now recommended as a substitute for organophosphorous pesticides. Since its use is increasing, its presence is increasingly found in the environment. It has high water solubility and is not easily biodegradable. It has the potential to pollute surface and ground waters. Here, the use of AOPs for the removal of acetamiprid from wastewater has been investigated. Five methods were selected for the study based on literature survey and preliminary experiments conducted. Fenton process, UV treatment, UV/ H2O2 process, photo-Fenton and photocatalysis using TiO2 were selected for study. Undoped TiO2 and TiO2 doped with Cu and Fe were prepared by sol-gel method. Characterisation of the prepared catalysts was done by X-ray diffraction, scanning electron microscope, differential thermal analysis and thermogravimetric analysis. Influence of major operating parameters on the removal of acetamiprid has been investigated. All the experiments were designed using central compoiste design (CCD) of response surface methodology (RSM). Model equations were developed for Fenton, UV/ H2O2, photo-Fenton and photocatalysis for predicting acetamiprid removal and total organic carbon (TOC) removal for different operating conditions. Quality of the models were analysed by statistical methods. Experimental validations were also done to confirm the quality of the models. Optimum conditions obtained by experiment were verified with that obtained using response optimiser. Fenton Process is the simplest and oldest AOP where hydrogen peroxide and iron are employed for the generation of hydroxyl radicals. Influence of H2O2 and Fe2+ on the acetamiprid removal and TOC removal by Fenton process were investigated and it was found that removal increases with increase in H2O2 and Fe2+ concentration. At an initial concentration of 50 mg/L acetamiprid, 200 mg/L H2O2 and 20 mg/L Fe2+ at pH 3 was found to be optimum for acetamiprid removal. For UV treatment effect of pH was studied and it was found that pH has not much effect on the removal rate. Addition of H2O2 to UV process increased the removal rate because of the hydroxyl radical formation due to photolyis of H2O2. An H2O2 concentration of 110 mg/L at pH 6 was found to be optimum for acetamiprid removal. With photo-Fenton drastic reduction in the treatment time was observed with 10 times reduction in the amount of reagents required. H2O2 concentration of 20 mg/L and Fe2+ concentration of 2 mg/L was found to be optimum at pH 3. With TiO2 photocatalysis improvement in the removal rate was noticed compared to UV treatment. Effect of Cu and Fe doping on the photocatalytic activity under UV light was studied and it was observed that Cu doping enhanced the removal rate slightly while Fe doping has decreased the removal rate. Maximum acetamiprid removal was observed for an optimum catalyst loading of 1000 mg/L and Cu concentration of 1 wt%. It was noticed that mineralisation efficiency of the processes is low compared to acetamiprid removal efficiency. This may be due to the presence of stable intermediate compounds formed during degradation Kinetic studies were conducted for all the treatment processes and it was found that all processes follow pseudo-first order kinetics. Kinetic constants were found out from the experimental data for all the processes and half lives were calculated. The rate of reaction was in the order, photo- Fenton>UV/ H2O2>Fenton> TiO2 photocatalysis>UV. Operating cost was calculated for the processes and it was found that photo-Fenton removes the acetamiprid at lowest operating cost in lesser time. A kinetic model was developed for photo-Fenton process using the elementary reaction data and mass balance equations for the species involved in the process. Variation of acetamiprid concentration with time for different H2O2 and Fe2+ concentration at pH 3 can be found out using this model. The model was validated by comparing the simulated concentration profiles with that obtained from experiments. This study established the viability of the selected AOPs for the removal of acetamiprid from wastewater. Of the studied AOPs photo- Fenton gives the highest removal efficiency with lowest operating cost within shortest time.

Impact of sward type, cutting date and conditioning temperature on mass and energy flows in the integrated generation of solid fuel and biogas from semi-natural grassland

Energy production from biomass and the conservation of ecologically valuable grassland habitats are two important issues of agriculture today. The combination of a bioenergy production, which minimises environmental impacts and competition with food production for land with a conversion of semi-natural grasslands through new utilization alternatives for the biomass, led to the development of the IFBB process. Its basic principle is the separation of biomass into a liquid fraction (press fluid, PF) for the production of electric and thermal energy after anaerobic digestion to biogas and a solid fraction (press cake, PC) for the production of thermal energy through combustion. This study was undertaken to explore mass and energy flows as well as quality aspects of energy carriers within the IFBB process and determine their dependency on biomass-related and technical parameters. Two experiments were conducted, in which biomass from semi-natural grassland was conserved as silage and subjected to a hydrothermal conditioning and a subsequent mechanical dehydration with a screw press. Methane yield of the PF and the untreated silage was determined in anaerobic digestion experiments in batch fermenters at 37°C with a fermentation time of 13-15 and 27-35 days for the PF and the silage, respectively. Concentrations of dry matter (DM), ash, crude protein (CP), crude fibre (CF), ether extract (EE), neutral detergent fibre (NDF), acid detergent fibre (ADF), acid detergent ligning (ADL) and elements (K, Mg, Ca, Cl, N, S, P, C, H, N) were determined in the untreated biomass and the PC. Higher heating value (HHV) and ash softening temperature (AST) were calculated based on elemental concentration. Chemical composition of the PF and mass flows of all plant compounds into the PF were calculated. In the first experiment, biomass from five different semi-natural grassland swards (Arrhenaterion I and II, Caricion fuscae, Filipendulion ulmariae, Polygono-Trisetion) was harvested at one late sampling (19 July or 31 August) and ensiled. Each silage was subjected to three different temperature treatments (5°C, 60°C, 80°C) during hydrothermal conditioning. Based on observed methane yields and HHV as energy output parameters as well as literature-based and observed energy input parameters, energy and green house gas (GHG) balances were calculated for IFBB and two reference conversion processes, whole-crop digestion of untreated silage (WCD) and combustion of hay (CH). In the second experiment, biomass from one single semi-natural grassland sward (Arrhenaterion) was harvested at eight consecutive dates (27/04, 02/05, 09/05, 16/05, 24/05, 31/05, 11/06, 21/06) and ensiled. Each silage was subjected to six different treatments (no hydrothermal conditioning and hydrothermal conditioning at 10°C, 30°C, 50°C, 70°C, 90°C). Energy balance was calculated for IFBB and WCD. Multiple regression models were developed to predict mass flows, concentrations of elements in the PC, concentration of organic compounds in the PF and energy conversion efficiency of the IFBB process from temperature of hydrothermal conditioning as well as NDF and DM concentration in the silage. Results showed a relative reduction of ash and all elements detrimental for combustion in the PC compared to the untreated biomass of 20-90%. Reduction was highest for K and Cl and lowest for N. HHV of PC and untreated biomass were in a comparable range (17.8-19.5 MJ kg-1 DM), but AST of PC was higher (1156-1254°C). Methane yields of PF were higher compared to those of WCD when the biomass was harvested late (end of May and later) and in a comparable range when the biomass was harvested early and ranged from 332 to 458 LN kg-1 VS. Regarding energy and GHG balances, IFBB, with a net energy yield of 11.9-14.1 MWh ha-1, a conversion efficiency of 0.43-0.51, and GHG mitigation of 3.6-4.4 t CO2eq ha-1, performed better than WCD, but worse than CH. WCD produces thermal and electric energy with low efficiency, CH produces only thermal energy with a low quality solid fuel with high efficiency, IFBB produces thermal and electric energy with a solid fuel of high quality with medium efficiency. Regression models were able to predict target parameters with high accuracy (R2=0.70-0.99). The influence of increasing temperature of hydrothermal conditioning was an increase of mass flows, a decrease of element concentrations in the PC and a differing effect on energy conversion efficiency. The influence of increasing NDF concentration of the silage was a differing effect on mass flows, a decrease of element concentrations in the PC and an increase of energy conversion efficiency. The influence of increasing DM concentration of the silage was a decrease of mass flows, an increase of element concentrations in the PC and an increase of energy conversion efficiency. Based on the models an optimised IFBB process would be obtained with a medium temperature of hydrothermal conditioning (50°C), high NDF concentrations in the silage and medium DM concentrations of the silage.