Determinação da matéria seca e teores de macronutrientes em folhas de frutíferas usando diferentes métodos de secagem

O objetivo desse estudo foi avaliar diferentes métodos de secagem de folhas para três diferentes frutíferas (maracujá, pêssego e abacate), com relação à determinação da matéria seca e os teores foliares de macronutrientes. Foram coletadas amostras de folhas recém expandida de três culturas, do pomar da fazenda de ensino e pesquisa da FCAV-UNESP, câmpus de Jaboticabal, no mês de janeiro de 2010, coletando-se para cada cultura 12 amostras com 25 folhas cada. Os tratamentos constituíram-se por dois métodos de secagem, estufa de circulação de ar forçada regulada a uma temperatura de 70°C e o forno microondas (FMO). Avaliou-se a massa da matéria seca e os teores foliares de macronutrientes. Os resultados sugerem que os dois métodos de secagem testados se assemelham na determinação de matéria seca e nos teores foliares de macronutrientes para as culturas análisadas, exceto os teores de cálcio na cultura do pêssego.

Heat treatment of pre-hydrolyzed silane increases adhesion of phosphate monomer-based resin cement to glass ceramic

This study evaluated the influence of different forms of heat treatment on a pre-hydrolyzed silane to improve the adhesion of phosphate monomer-based (MDP) resin cement to glass ceramic. Resin and feldspathic ceramic blocks (n=48, n=6 for bond test, n=2 for microscopy) were randomly divided into 6 groups and subject to surface treatments: G1: Hydrofluoric acid (HF) 9.6% for 20 s + Silane + MDP resin cement (Panavia F); G2: HF 9.6% for 20 s + Silane + Heat Treatment (oven) + Panavia F; G3: Silane + Heat Treatment (oven) + Panavia F; G4: HF 9.6% for 20 s + Silane + Heat Treatment (hot air) + Panavia F; G5: Silane + Heat Treatment (hot air) + Panavia F; G6: Silane + Panavia F. Microtensile bond strength (MTBS) test was performed using a universal testing machine (1 mm/min). After debonding, the substrate and adherent surfaces were analyzed using stereomicroscope and scanning electron microscope (SEM) to categorize the failure types. Data were analyzed statistically using two-way test ANOVA and Tukey's test (=0.05). Heat treatment of the silane containing MDP, with prior etching with HF (G2: 13.15 ± 0.89a; G4: 12.58 ± 1.03a) presented significantly higher bond strength values than the control group (G1: 9.16 ± 0.64b). The groups without prior etching (G3: 10.47 ± 0.70b; G5: 9.47 ± 0.32b) showed statistically similar bond strength values between them and the control group (G1). The silane application without prior etching and heat treatment resulted in the lowest mean bond strength (G6: 8.05 ± 0.37c). SEM analysis showed predominantly adhesive failures and EDS analysis showed common elements of spectra (Si, Na, Al, K, O, C) characterizing the microstructure of the glass-ceramic studied. Heat treatment of the pre-hydrolyzed silane containing MDP in an oven at 100 °C for 2 min or with hot air application at 50 ± 5 ºC for 1 min, was effective in increasing the bond strength values between the ceramic and resin cement containing MDP.

Avaliação da biodegradação de tolueno por fungos isolados de ambientes associados ao petróleo

Spills can ocurr during oil productive chain and contaminate various environments due to the toxicity of monoaromatics hidrocarbons. Toluene stands out for being agressive to the nervous sistem and teratogenic, with high mobility and solubility in water, which facilitates environmental impact. Studies show that fungi are potential aromatic compounds assimilators, encouraging new researches about its use on the recovery of contaminated sites. This study aimed to select and characterize fungus with potential for biorremediation of toluene. 50 fungi were selected of the Collection of Microorganisms of Interest for Oil Gas and Biofuels, of UNESP Rio Claro, all of which were isolated from sites contaminated with monoaromatic hydrocarbons. Two trials were realized to select the microorganism with greater potential. The first test evaluated fungal growth under toluene saturated atmosphere. 24 fungi were chosen because its greater biomass production to participate in the next trial, the degradation in plates test, where the blue redox agente, DCPIP, indicates the degradation reaction, turning colorless. From this teste was possible to select one isolate which showed higher growth and stronger medium discoloration as the microorganism with the greatest potential to assimilate toluene. The Trichoderma cf. koningii had its potential evaluated through gas cromatography. The experiment proved the efficiency of the methodology, with positives results from the method validation and the effectiveness demonstrated of the LA-PHA-PACK bottles to prevent the volatilization of toluene during the 21 days of experiment. Being reliable its use for monitoring toluene decay associating it with degradation. This results are important because there aren't many methodologies and vials efficient to the purpose of this work. In the present study the degradation rates demonstrated no significant decay of the concentration of hydrocarbon. That may be related to the...

Análise do aporte de sedimentos na bacia hidrográfica do córrego Assistência, SP: caso do Polo Cerâmico de Santa Gertrudes

Pós-graduação em Geociências e Meio Ambiente - IGCE

Efeitos da doxicilina na hipertensão arterial induzida pela exposiçao ao chumbo: quantificação de pepídeos vasoativos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo de manobras evasivas com perturbações orbitais

Pós-graduação em Física - FEG

Eletro-oxidação de metanol e etanol sobre PtAu/C em meio alcalino

The development of electrocatalysts for the oxidation of methanol and ethanol is very important, because these alcohols may be used in the anode fuel cells which convert chemical energy directly into electrical energy with high efficiency, cleanly and with low noise. Thus, this study reports to the synthesis of nanocatalysts of PtAu supported on carbon by microemulsion method. The physical characterization of these catalysts is performed through the techniques of X-ray diffraction and transmission electron microscopy. The catalytic activity of the prepared materials was studied using conventional electrochemical techniques and also the technique of spectro-electrochemical in situ FTIR, which allows identification of intermediates and products of the reactions. From the x-ray diffraction, it was observed that the thermal treatment applied to catalysts favored incorporation of Au into the crystal lattice of Pt,that is, increased the formation of PtAu alloy. Micrographs indicated particle size about 3 nm to materials not heat treated and 9 nm to materials subjected to thermal treatment (heating at 150 ° C for 1h and 30 min in argon atmosphere). Current density oxidation of methanol on PtAu / C were superior to pure platinum. Spectroscopic results indicated the presence of formate in solution in 50:50 and the composition showed bands for CO2, indicating complete oxidation, in lower potential. During ethanol oxidation on the catalyst PtAu, the main product formed was acetate, product of incomplete oxidation. The good performance for methanol oxidation can be attributed to large amounts of oxygen species adsorbed on the catalyst surface, or an electronic effect.

Poluentes orgânicos persistentes em ar interior: desenvolvimento de método de extração em adsorvente para amostragem ativa

Persistent Organic Pollutants (POPs) are chemical substances extraordinarily toxic and persistent in the environment. Due to these properties, POPs are targets of the Stockholm Convention which aims to provide means to eliminate production and use by encouraging the reduction and, where possible, eliminating the release of these contaminants to the environment. One of the articles of this _Convention aims to assess the basal levels of such substances in the environment to monitor both the reduction of release to the environment, and to assess human exposure, using analyzes of milk and air for example. Although efforts to control POPs production and release to the environment have been made, data about their levels in Brazil are still scarce, mainly in the atmosphere or indoor environment. Considering the permanence of people inside its house, this study presents a method for POP extraction from XAD-2 sorbent employed in indoor air sampling, with identification and quantification by GC-ECD. GC-ECD linear range of the studied analytes, congeners of polychlorinated biphenyls (PCB) (28, 52, 101, 118, 138, 153 and 180), DDTs and their metabolites (DDDs, DDEs) and endosullan (isomers c - and 13 - and metabolite endosulfan sulfate) ranged between 0.5 and 16.0 ng mL-I with r2 > 0.967. The method developing consist of selecting the extraction solvent system by agitation (90 rpm, 1 hour) with n-hexan,e (2 mL) or n-hexane:acetone (1:1, v/v) (2 mL), concentration the extract with a gentle N2 stream, and evaluation of breakthrough with passage or air through the fortified XAD-2 cartridge before extraction, employing a low volume air suction pump (Pump Model 224 universal-PCXR8; 5-5000 mL min-1, SKC Inc., Eighty Four, PA, USA), Calibrator Dry-Cal DC-Lite (BIOS, Butler, NJ, USA)). Two fortification levels were employed, 15 and 30 ng. After selecting n-hexane as extraction solvent, with accuracy and precision ranging...

Aplicação de um modelo numérico na otimização de fornos alimentícios usando o OpenFOAM®

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Crescimento econômico e desacoplamento do uso de recursos naturais e de impactos ambientais: evidências para o Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A substituição do meio TCM pelo meio BARC, suplementado com SFB, BSA ou PVA, para maturação de oócitos bovinos in vitro, não incrementa a subsequente produção de blastocistos

This study was carried out to assess the influence of bovine embryo culture medium Beltsville Agriculture Research Center (BARC), supplemented with FCS, BSA or PVA, on the in vitro oocyte maturation, evidenced by cleavage rate and blastocysts production at different developmental stages. Three experiments were performed, as follows: exp.1: addition of FCS to BARC medium at concentrations of 0, 5 and 10%; exp. 2: addition of BSA to BARC medium at concentrations of 0, 4 and 8 mg/ml; exp. 3: addition of PVA to BARC medium at concentrations of 0, 0.5 and 1.0 mg/ml. TCM 199 supplemented with bicarbonate, pyruvate, gentamicin sulfate, FSH, LH and FCS was used as control group. Oocytes obtained from cow ovaries at slaughterhouse were selected in PBS, and then matured in BARC medium supplemented with FSH, LH and gentamicin sulfate, according to the experimental design. Percoll gradient was used for sperm selection and TALP medium for IVF. In vitro embryo culture was in SOF-m medium; a humidified atmosphere with 5% CO2, in air, at 38.7oC was used for all steps. The number of oocytes reaching blastocyst, expanded blastocyst, and hatched blastocyt stages was recorded, respectively at 72 and 168 h post-insemination. ANOVA and Bonferroni t test were used to determine differences among groups. Differences of P<0.05 were taken as significant. Higher percentage (P<0.05) of cleaved oocytes was observed in group TCM + FCS than for the other groups matured in BARC supplemented with FCS or BSA, regardless the concentration used. However, the cleavage rate was similar between groups BARC plus PVA with 1 mg/ml (85.7%) and TCM + FCS (90.8%). Significant difference was found among groups for the production of blastocysts, with the control group yielding a higher number of blastocysts (results ranging from 47.4 to 51.4%, in comparison with groups using BARC + FCS (4.1 to 19.7%), BSA (1.4 to 5.6%) and PVA (5.7 to 10.6%). In conclusion, BARC medium supplemented with different macromolecules did not promote a beneficial effect on in vitro oocyte maturation, resulting in lower rate of cleavage and blastocyst production when compared with TCM + FCS medium.

Produção de progesterona pelas células luteínicas esteroidogênicas bovina cultivadas e co-cultivadas in vitro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Utilização da modelagem sistêmica para analisar o efeito da variação climática no parâmetro produtividade da água na laranja Natal (Citrus sinensis L. Osbeck) no Estado de São Paulo

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Imunossensor impedimétrico e dispositivo compreendendo o mesmo

Imunossensor impedimétrico e dispositivo compreendendo o mesmo. O presente pedido de patente revela um dispositivo de detecção impedimétrico voltado a áreas críticas de contaminação microbiana, compreendendo um eletrodo construído a partir de monocamadas autoorganizadas e proteína a imobilizadas na superfície de seu transdutor. A avaliação da contaminação microbiana é efetuada por meio da sucção da atmosfera interna do ambiente, interação Ag-Ac e detecção por impedância eletroquímica.

Desenvolvimento de uma rede de sensores sem fio aplicada no monitoramento da variabilidade térmica em casas de vegetação

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)