Short-term effect of targeted placements of sheep excrement on grassland in inner mongolia on soil and plant parameters

Grazing animal excrement plays an important role in nutrient cycling and redistribution in grazing ecosystems, due to grazing in large areas and return in small areas. To elucidate the changes to the soil and pasture caused by sheep urine, fresh dung, and compost patches, a short- term field experiment using artificially placed pats was set up in the autumn of 2003 in the Inner Mongolian steppe. Urine application significantly increased soil pH during the first 32 days in soil layers at depths of both 0 - 5 cm and 5 - 15 cm. Rapid hydrolysis of urea gave large amounts of urine- nitrogen ( N) as ammonium ( NH4+) in soil extracts and was followed by apparent nitrification from day 2. Higher inorganic N content in the urine- treated soil was found throughout the experiment compared with the control. No significant effects of sheep excrement on soil microbial carbon ( C) and soil microbial N was found, but microbial activities significantly increased compared with the control after application of sheep excrement. Forty- six percent of dung- N and 27% of compost- N were transferred into vegetation after the experiment. The results from this study suggest that large amounts of nutrients have been lost from the returned excrement patches in the degraded grassland of Inner Mongolia, especially from sheep urine- N.

Independence of alpine meadow plants from soil organic matter for nitrogen supply: evidence from stable nitrogen isotopes

Stable nitrogen isotope signatures of major sources of mineral nitrogen ( mineralization of soil organic nitrogen, biological N-2 fixation by legumes, annual precipitation and plant litter decomposition) were measured to relatively define their individual contribution to grass assimilation at the Haibei Alpine Meadow Ecosystem, Qinghai, China. The results indicated that delta N-15 values (- 2.40 parts per thousand to 0.97 parts per thousand) of all grasses were much lower than those of soil organic matter (3.4 +/- 0.18 parts per thousand) and mineral nitrogen ( ammonium and nitrate together,7.8 +/- 0.57 parts per thousand). Based on the patterns of stable nitrogen isotopes, soil organic matter (3.4 +/- 0.18 parts per thousand), biological N-2 fixation (0 parts per thousand), and precipitation (- 6.34 +/- 0.24 parts per thousand) only contributed to a small fraction of nitrogen requirements of grasses, but plant litter decomposition (- 1.31 +/- 1.01 parts per thousand) accounted for 67%.

淡水湖泊水体中溶解有机氮测定方法的对比

溶解有机氮（Dissolved Organic Nitrogen，DON）是天然水体中氮的重要组成部分，目前研究相对很少．本文对淡水中测定DON的两种常见方法即过硫酸钾湿氧化法（Persulfate Oxidation，PO）和高温催化氧化法（High Temperature Cataytic Oxidation，HTCO）进行了对比研究．结果表明：两种方法各有特点，湿氧化法相对较为理想．湿氧化法对不同氮标准化合物的回收率较高，平均为96．0±3．O％以上（杂环氮化合物除外）；对湖泊淡水样品，用PO法测定溶解有机氮的相对标准偏差范围为6．2％-12．5％．高温催化氧化法对不同氮标准化合物的回收率较低，平均为68．4±13．6％，需作进一步条件优化.

Capillary electrochromatography using a strong cation-exchange column with a dynamically modified cationic surfactant

A novel mode of capillary electrochromatography (CEC), called dynamically modified strong cation-exchange CEC (DMSCX-CEC), is described in this paper. A column packed with a strong cation-exchange (SCX) packing material was dynamically modified with a long-chain quaternary ammonium salt, cetyltrimethylammonium bromide (CTAB), which was added to the mobile phase. CTAB ions were adsorbed onto the surface of the SCX packing material, and the resulting hydrophobic layer on this packing was used as the stationary phase. Using the dynamically modified SCX column, neutral solutes were separated with the CEC mode. The highest number of theoretical plates obtained was about 190 000/m, and the relative standard deviations (RSD's) for migration times and capacity factors of alkylbenzenes were less than 1.0% and 2.0% for five consecutive runs, respectively. The effects of CTAB and methanol concentrations and the pH value of the mobile phase on the electroosmotic flow and the separation mechanism were investigated. Excellent simultaneous separation of the basic and neutral solutes in DMSCX-CEC with a high-pH mobile phase was obtained, A mixture containing the acidic, basic, and neutral compounds was well separated in this mode with a low-pH mobile phase; however, peak tailing for basic compounds was observed in this mobile phase.

Capillary electrochromatography with a silica column with a dynamically modified cationic surfactant

A novel mode of capillary electrochromatography (CEC), called dynamically modified silica-capillary electrochromatography, is described in this paper. The column packed with bare silica was dynamically modified with long chain quaternary ammonium salt, cetyltrimethylammonium bromide (CTAB), which was added into the mobile phase. CTAB ions were adsorbed onto the surface of bare silica, and the resulted hydrophobic layer on the silica gel was used as the stationary phase; Using the dynamically modified silica column, neutral solutes were separated by CEC. The highest number of theoretical plates obtained was about 71 500/m and the relative standard deviations for t(0) and capacity factor of toluene were 4.7% and 4.9% for 20 consecutive runs, respectively. The separation mechanism of neutral solutes and the influence of mobile phase composition on the separation was investigated. The separation of nitrogen-containing solutes was carried out with this mode and the peak tailing of basic solute was effectively eliminated because the adsorption of basic solute on silica was blocked by the preferred adsorption of CTAB. (C) 1999 Elsevier Science B.V. All rights reserved.

Determination of total iron binding capacity of serum by capillary electrophoresis

A capillary electrophoresis (CE) technique for determining total iron binding capacity (TIBC) of serum has been developed. The optimum serum pretreatment involves the following major steps: at first, saturate serum transferrin with Fe+3; then, dissociate them completely after removing excess unbound Fe. Finally, complex the released iron with phenanthroline, a chromophore, to make suitable for the CE analysis. Ammonium acetate (pH = 5.0) was used as CE background electrolyte solution. In this system, a good linear correlation coefficient was maintained over the range 0.5 similar to 10 mu M (r = 0.9979, n =12). Seven adult serum samples were studied and the TIBC parameters measured. In the present system, 10 similar to 30 mu L serum is sufficient for determination. The study shows that the CE technique described is a powerful method for rapid, efficient, sensitive and reliable analysis and hence particularly suitable for clinical application.

Determination of urinary nucleosides by direct injection and coupled-column high-performance liquid chromatography

A coupled-column liquid chromatographic method for the direct analysis of 14 urinary nucleosides is described. Efficient on-line clean-up and concentration of 14 nucleosides from urine samples were obtained by using a boronic acid-substituted silica column (40 turn x 4.0 mm I.D.) as the first column (Col-1) and a Hypersil ODS2 column (250 mm x 4.6 mm I.D.) as the second column (Col-2). The mobile phases applied consisted of 0.25 mol/L ammonium acetate (pH 8.5) on Col-1, and of 25 mmol/L potassium dihydrogen phosphate (pH 4.5) on Col-2, respectively. Determination of urinary nucleosides was performed on Col-2 column by using a linear gradient elution comprising 25 mmol/L potassium dihydrogen phosphate (pH 4.5) and methanol-water (60:40, v/v) with UV detection at 260 nm. Urinary nucleosides analysis can be carried out by this procedure in 50 min requiring only pH adjustment and the protein precipitation by centrifugation of urine samples. Calibration plots of 14 standard nucleosides showed excellent linearity (r > 0.995) and the limits of detection were at micromolar levels. Both of intra- and inter-day precisions of the method were better than 6.6% for direct determination of 14 nucleosides. The validated method was applied to quantify 14 nucleosides in 20 normal urines to establish reference ranges. (c) 2005 Elsevier B.V. All rights reserved.

Selective oxidations on recoverable catalysts assembled in emulsions

Catalysts assembled in emulsions are found to be potentially recoverable and efficient for a number of catalytic reactions. The catalysts composed of polyoxometalate anions and quaternary ammonium cations have been designed and synthesized according to the catalytic reactions and by optimizing the structures of cations and anions. The catalysts act essentially as surfactants, which are uniformly distributed in the interface of the emulsion droplets, and accordingly behave like homogeneous catalysts. The catalysts show remarkable selectivity and activity in the oxidation of sulfur-containing molecules to sulfones in diesel and the selective oxidation of alcohols to ketones, using H2O2 as oxidant. For an example, the catalyst demonstrated over 96% efficiency of H2O2 and similar to 100% selectivity to sulfones for the selective oxidation of sulfur-containing molecules in real diesel. Moreover, the catalysts can be separated and recycled by a simple demulsification and re-emulsification.

Efeito da proporcao NH4+/NO3- na distribuicao de nitrato e na atividade in vitro da redutase do nitrato de plantas de Panicum maximum.

O objetivo deste trabalho foi estudar os efeitos da nutricao nitrica e amoniacal na distribuicao de nitrato e na atividade in vitro da redutase do nitrato em plantas de capim coloniao ( Panicum maximum Jacq.). as plantas receberam 7 mM de nitrogenio nas forma N- NH4 +, N-NO3- ou combinadas nas seguintes proporcoes 0/100, 25/75, 50/50, 75/25 e 100/0. A extracao enzigmatica foi feita em Tris-HCI 50mM pH 7,5, EDTA 0,5 mM e b-mercaptoetanol 10mM, e para o ensaio utilizou-se 200 mmoles de Tris-HCI pH 7,5, 20 mmoles KNO3, 0,1 mmol NADH e 0,1 mL de Triton X-100 1% no volume final de 2,0 mL. A concentracao de nitrato foi levemente superior na parte aerea quando as plantas receberam ambas as formas de nitrogenio, e na raiz seta decresceu com o aumento da proporcao de aminio. A atividade in vitro de redutase do nitrato so foi observada nas folhas e foi maior quando as plantas receberam ambas as formas de nitrogenio. Os resultados sugerem um efeito estimulador do amonio no tranporte de nitrato e na atividade de redutase do nitrato quando NO3- esta presente.

Assimilacao do nitrogenio pelas plantas de panicum maximum, cv. Vencedor, submetidas a diferentes proporcoes NH4+/NO3-.

Visando a elucidar alguns aspectos do metabolismo do nitrogenio por plantas de Panicum maximum, estudaram-se os efeitos da proporcao NH +4/NO-3 na variacao do pH das solucoes nutritivas de tratamento, no acumulo de materia seca e na distribuicaoo de nitrogenio na planta. Para tal, as plantas foram cultivadas em camara de crescimento na solucao nutritiva (pH 5,5) completa, contendo nitrogenio somente na forma nitrica. Aos 25 dias depois da germinacao, as plantas foram submetidas a 100 ppm de nitrogenio fornecido nas formas nitrica e amoniacal ou amonical, nas seguintes proporcoes 0/100,25/75,50/50,75/25 e 100/0, durante quatro dias. O pH das solucoes nutritivas foi medido e corrigido diariamente. Os resultados demostraram que o pH aumentou na presenca exclusiva de nitrato (pH 6,5) e decresceu na presenca exclusiva de amonio (pH 3,5). Na presenca de ambas as formas de nitrogenio, o pH permaneceu em torno de 5,0 nos dois primeiros dias entao diminui para cerca de 4,5 nos dias subsequentes. Esses resultados indicam que as plantas de Panicum maximum absorveram o nitrato, inicialmente, porem com o tempo adaptaram-se a presenca de amonio e tenderam a absorver ambas as formas. As plantas que receberam nitrato, combinados ou não com amonio, apresentaram o peso da materia seca, N-total e N-soluvel total superiores as que receberam somente amonio como fonte de N, havenso pequena tendencia de maior acumulo na presenca de ambas as fontes. No tratamento 100% de amonio, pN-total e o N-soluvel total diminuiram apreciavelmente, indicando baixa capacidade de essa especie utilizar amonio como fonte única de nitrogenio. Os resultados indicam que, embora as plantas possa absorver as duas formas de nitrogenio, a combinacao entre ambas parece ser a forma ideal para o crescimento das mesmas.

Inibição temporária do crescimento de plantas voluntárias de soja na cultura do girassol.

RESUMO: O controle de plantas voluntárias de soja (Glycine max ) é uma exigência estabelecida em lei. A criação do vazio sanitário determina o período na entressafra no qual não deve haver a presença no campo de plantas emergidas de soja. Essa deliberação visa reduzir o inóculo do fungo causador da ferrugem asiática da soja (Phakopsora pachyrhizi). Além disso, a competição imposta por essas plantas pode reduzir a produtividade das culturas em sucessão. O experimento foi conduzido a fim de avaliar o controle de plantas voluntárias de soja em cultivos de girassol (Helianthus annuus). Os tratamentos aplicados foram: testemunha capinada, testemunha sem capina, amônio glufosinato 40 g i.a. ha-1, amônio glufosinato 100 g i.a. ha-1, sulfentrazone 75 g i.a. ha-1, sulfentrazone 100 g i.a. ha-1, tembotrione 21 g i.a. ha-1, carfentrazone 4 g i.a. ha-1, saflufenacil 1,75 g i.a. ha-1, saflufenacil 3,5 g i.a. ha-1, triclopyr 120 g i.a. ha-1 e MSMA 197,5 g i.a. ha-1. O herbicida sulfentrazone nas doses de 75 e 100 g i.a. ha -1 causa fitotoxicidade ao girassol logo após a aplicação, porém há recuperação das plantas, sem prejuízo a produtividade da cultura. Esses mesmos tratamentos não causam morte total das plantas voluntárias de soja, mas paralisam temporariamente seu crescimento, evitando a competição com a cultura do girassol. O amônio glufosinato é eficaz no controle de plantas voluntárias de soja. No entanto, os sintomas de fitotoxicidade na cultura do girassol são elevados, refletindo em perda de rendimento da cultura. Os outros tratamentos não proporcionam controle satisfatório das plantas voluntárias de soja, além de causar redução na produtividade do girassol. ABSTRACT: The control of volunteer soybean (Glycine max) is regulated by law due to the host-free period which determines the interval that is not allowed the presence of soybean plants in fields. The decision aims to reduce the inoculum of the fungus that causes the Asian soybean rust (Phakopsora pachyrhizi). Furthermore, the competition imposed by volunteer soybean plants can reduce crop yields. The experiment was conducted to evaluate the control of volunteer soybean plants in sunflower (Helianthus annuus). The treatments were as follows: hoed check, check without hoeing, glufosinate ammonium 40 g ai ha-1, glufosinate ammonium 100 g ai ha-1, sulfentrazone 75 g ai ha-1, sulfentrazone 100 g ai ha-1, tembotrione 21 g ai ha-1, carfentrazone 4g ai ha-1, saflufenacil 1.75 g ai ha-1, saflufenacil 3.5 g ai ha -1, triclopyr 120 g ai ha-1 and MSMA 197.5 g ai ha-1. Sulfentrazone (75 and 100 g ai ha-1) caused phytotoxicity on sunflower plants, however there is recovery of plants and no yield losses. The same treatments do not cause the total death of volunteer soybean plants, however temporarily paralyze its growth and avoid competition with the sunflower crop. The glufosinate ammonium is effective in controlling volunteer soybean plants. However, symptoms of phytotoxicity in the sunflower crop are high, reflecting in yield losses. The other treatments do not provide satisfactory control of volunteer soybean plants and even cause reduction in sunflower productivity.

An investigation into the tropospheric chemistry of acidic aerosols and ammonia in the laboratory

This thesis describes a broad range of experiments based on an aerosol flow-tube system to probe the interactions between atmospherically relevant aerosols with trace gases. This apparatus was used to obtain simultaneous optical and size distribution measurements using FTIR and SMPS measurements respectively as a function of relative humidity and aerosol chemical composition. Heterogeneous reactions between various ratios of ammonia gas and acidic aerosols were studied in aerosol form as opposed to bulk solutions. The apparatus is unique, in that it employed two aerosol generation methods to follow the size evolution of the aerosol while allowing detailed spectroscopic investigation of its chemical content. A novel chemiluminescence apparatus was also used to measure [NH4+]. SO2.H2O is an important species as it represents the first intermediate in the overall atmospheric oxidation process of sulfur dioxide to sulfuric acid. This complex was produced within gaseous, aqueous and aerosol SO2 systems. The addition of ammonia, gave mainly hydrogen sulfite tautomers and disulfite ions. These species were prevalent at high humidities enhancing the aqueous nature of sulfur (IV) species. Their weak acidity is evident due to the low [NH4+] produced. An increasing recognition that dicarboxylic acids may contribute significantly to the total acid burden in polluted urban environments is evident in the literature. It was observed that speciation within the oxalic, malonic and succinic systems shifted towards the most ionised form as the relative humidity was increased due to complete protonisation. The addition of ammonia produced ammonium dicarboxylate ions. Less reaction for ammonia with the malonic and succinic species were observed in comparison to the oxalic acid system. This observation coincides with the decrease in acidity of these organic species. The interaction between dicarboxylic acids and ‘sulfurous’/sulfuric acid has not been previously investigated. Therefore the results presented here are original to the field of tropospheric chemistry. SHO3-; S2O52-; HSO4-; SO42- and H1,3,5C2,3,4O4-;C2,3,4O4 2- were the main components found in the complex inorganic-organic systems investigated here. The introduction of ammonia produced ammonium dicarboxylate as well as ammonium disulfite/sulfate ions and increasing the acid concentrations increased the total amount of [NH4+].

Atomic layer deposition of interface control layers for the fabrication of III/V MOS devices

The continued advancement of metal oxide semiconductor field effect transistor (MOSFET) technology has shifted the focus from Si/SiO2 transistors towards high-κ/III-V transistors for high performance, faster devices. This has been necessary due to the limitations associated with the scaling of the SiO2 thickness below ~1 nm and the associated increased leakage current due to direct electron tunnelling through the gate oxide. The use of these materials exhibiting lower effective charge carrier mass in conjunction with the use of a high-κ gate oxide allows for the continuation of device scaling and increases in the associated MOSFET device performance. The high-κ/III-V interface is a critical challenge to the integration of high-κ dielectrics on III-V channels. The interfacial chemistry of the high-κ/III-V system is more complex than Si, due to the nature of the multitude of potential native oxide chemistries at the surface with the resultant interfacial layer showing poor electrical insulating properties when high-κ dielectrics are deposited directly on these oxides. It is necessary to ensure that a good quality interface is formed in order to reduce leakage and interface state defect density to maximise channel mobility and reduce variability and power dissipation. In this work, the ALD growth of aluminium oxide (Al2O3) and hafnium oxide (HfO2) after various surface pre-treatments was carried out, with the aim of improving the high-κ/III-V interface by reducing the Dit – the density of interface defects caused by imperfections such as dangling bonds, dimers and other unsatisfied bonds at the interfaces of materials. A brief investigation was performed into the structural and electrical properties of Al2O3 films deposited on In0.53Ga0.47As at 200 and 300oC via a novel amidinate precursor. Samples were determined to experience a severe nucleation delay when deposited directly on native oxides, leading to diminished functionality as a gate insulator due to largely reduced growth per cycle. Aluminium oxide MOS capacitors were prepared by ALD and the electrical characteristics of GaAs, In0.53Ga0.47As and InP capacitors which had been exposed to pre-pulse treatments from triethyl gallium and trimethyl indium were examined, to determine if self-cleaning reactions similar to those of trimethyl aluminium occur for other alkyl precursors. An improved C-V characteristic was observed for GaAs devices indicating an improved interface possibly indicating an improvement of the surface upon pre-pulsing with TEG, conversely degraded electrical characteristics observed for In0.53Ga0.47As and InP MOS devices after pre-treatment with triethyl gallium and trimethyl indium respectively. The electrical characteristics of Al2O3/In0.53Ga0.47As MOS capacitors after in-situ H2/Ar plasma treatment or in-situ ammonium sulphide passivation were investigated and estimates of interface Dit calculated. The use of plasma reduced the amount of interface defects as evidenced in the improved C-V characteristics. Samples treated with ammonium sulphide in the ALD chamber were found to display no significant improvement of the high-κ/III-V interface. HfO2 MOS capacitors were fabricated using two different precursors comparing the industry standard hafnium chloride process with deposition from amide precursors incorporating a ~1nm interface control layer of aluminium oxide and the structural and electrical properties investigated. Capacitors furnished from the chloride process exhibited lower hysteresis and improved C-V characteristics as compared to that of hafnium dioxide grown from an amide precursor, an indication that no etching of the film takes place using the chloride precursor in conjunction with a 1nm interlayer. Optimisation of the amide process was carried out and scaled samples electrically characterised in order to determine if reduced bilayer structures display improved electrical characteristics. Samples were determined to exhibit good electrical characteristics with a low midgap Dit indicative of an unpinned Fermi level

Synthesis, functionalisation and characterisation of germanium nanocrystals & their applications

In the last two decades, semiconductor nanocrystals have been the focus of intense research due to their size dependant optical and electrical properties. Much is now known about how to control their size, shape, composition and surface chemistry, allowing fine control of their photophysical and electronic properties. However, genuine concerns have been raised regarding the heavy metal content of these materials, which is toxic even at relatively low concentrations and may limit their wide scale use. These concerns have driven the development of heavy metal free alternatives. In recent years, germanium nanocrystals (Ge NCs) have emerged as environmentally friendlier alternatives to II-VI and IV-VI semiconductor materials as they are nontoxic, biocompatible and electrochemically stable. This thesis reports the synthesis and characterisation of Ge NCs and their application as fluorescence probes for the detection of metal ions. A room-temperature method for the synthesis of size monodisperse Ge NCs within inverse micelles is reported, with well-defined core diameters that may be tuned from 3.5 to 4.5 nm. The Ge NCs are chemically passivated with amine ligands, minimising surface oxidation while rendering the NCs dispersible in a range of polar solvents. Regulation of the Ge NCs size is achieved by variation of the ammonium salts used to form the micelles. A maximum quantum yield of 20% is shown for the nanocrystals, and a transition from primarily blue to green emission is observed as the NC diameter increases from 3.5 to 4.5 nm. A polydisperse sample with a mixed emission profile is prepared and separated by centrifugation into individual sized NCs which each showed blue and green emission only, with total suppression of other emission colours. A new, efficient one step synthesis of Ge NCs with in situ passivation and straightforward purification steps is also reported. Ge NCs are formed by co-reduction of a mixture of GeCl4 and n-butyltrichlorogermane; the latter is used both as a capping ligand and a germanium source. The surface-bound layer of butyl chains both chemically passivates and stabilises the Ge NCs. Optical spectroscopy confirmed that these NCs are in the strong quantum confinement regime, with significant involvement of surface species in exciton recombination processes. The PL QY is determined to be 37 %, one of the highest values reported for organically terminated Ge NCs. A synthetic method is developed to produce size monodisperse Ge NCs with modified surface chemistries bearing carboxylic acid, acetate, amine and epoxy functional groups. The effect of these different surface terminations on the optical properties of the NCs is also studied. Comparison of the emission properties of these Ge NCs showed that the wavelength position of the PL maxima could be moved from the UV to the blue/green by choice of the appropriate surface group. We also report the application of water-soluble Ge NCs as a fluorescent sensing platform for the fast, highly selective and sensitive detection of Fe3+ ions. The luminescence quenching mechanism is confirmed by lifetime and absorbance spectroscopies, while the applicability of this assay for detection of Fe3+ in real water samples is investigated and found to satisfy the US Environmental Protection Agency requirements for Fe3+ levels in drinkable water supplies.

Organic nitrogen in PM2.5 aerosol at a forest site in the Southeast US

There is growing evidence that organo-nitrogen compounds may constitute a significant fraction of the aerosol nitrogen (N) budget. However, very little is known about the abundance and origin of this aerosol fraction. In this study, the concentration of organic nitrogen (ON) and major inorganic ions in PM2.5 aerosol were measured at the Duke Forest Research Facility near Chapel Hill, NC, during January and June of 2007. A novel on-line instrument was used, which is based on the Steam Jet Aerosol Collector (SJAC) coupled to an on-line total carbon/total nitrogen analyzer and two on-line ion chromatographs. The concentration of ON was determined by tracking the difference in concentrations of total nitrogen and of inorganic nitrogen (determined as the sum of N-ammonium and N-nitrate). The time resolution of the instrument was 30 min with a detection limit for major aerosol components of ∼0.1 mu;gm-3. Nitrogen in organic compounds contributed ∼33% on average to the total nitrogen concentration in PM2.5, illustrating the importance of this aerosol component. Absolute concentrations of ON, however, were relatively low (lt;1.0 mu;gm-3) with an average of 0.16 mu;gm-3. The absolute and relative contribution of ON to the total aerosol nitrogen budget was practically the same in January and June. In January, the concentration of ON tended to be higher during the night and early morning, while in June it tended to be higher during the late afternoon and evening. Back-trajectories and correlation with wind direction indicate that higher concentrations of ON occur in air masses originating over the continental US, while marine air masses are characterized by lower ON concentrations. The data presented in this study suggests that ON has a variety of sources, which are very difficult to quantify without information on chemical composition of this important aerosol fraction.