Efeito dos substratos e temperaturas na germinação de sementes de Cnidosculus phyllacanthus Pax & K. Hoffm. (Faveleira)

Este trabalho foi conduzido com o objetivo estudar diferentes substratos e temperaturas para germinação de sementes de faveleira. Foram testadas as temperaturas constantes de 25º e 30ºC e alternadas com amplitudes de 5ºC (30-35ºC), 10ºC (20-30º e 25-35ºC) e 15ºC (20-35ºC), e fotoperíodo de oito horas para a temperatura mais elevada e dezesseis horas para a temperatura mais baixa. Os substratos papel de filtro, areia, vermiculita e papel germitest, foram umedecidos com solução de nistatina 0,2%. Para o teste de germinação em laboratório para sementes de faveleira pode-se recomendar os substratos areia, vermiculita, papel germitest e papel filtro combinado com temperaturas alternadas de 20ºC -30ºC. Para o teste de vigor, velocidade de germinação de sementes de faveleira, pode-se recomendar o substrato papel filtro combinado com as temperaturas alternadas de 20ºC -30ºC.

Bases para a padronização do teste de germinação em três espécies de Solanum L.

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Germinação de sementes de pau-ferro submetidas a diferentes condições de armazenamento, escarificação química, temperatura e luz

Caesalpinia leiostachya (Benth.) Ducke (pau-ferro) é uma planta arbórea nativa do Brasil, cujas sementes possuem dormência causada pela impermeabilidade do tegumento à água. Neste trabalho foram conduzidos dois experimentos, nos quais foram utilizados diferentes períodos de escarificação em ácido sulfúrico concentrado para superar a dormência das sementes. No primeiro experimento, sementes coletadas em agosto de 1997 foram armazenadas por oito meses em ambiente não controlado no interior do próprio fruto, e em câmara seca após serem extraídas dos frutos; a seguir, elas foram imersas em ácido sulfúrico por 0, 10, 20, 40, 60 e 80min e colocadas para germinar nas temperaturas constante de 25ºC e alternada de 20-30°C, sob fotoperíodo de 8h. No segundo experimento, sementes extraídas de frutos recém-coletados em agosto de 1998 foram imersas em ácido sulfúrico por 0, 10, 20, 30, 40 e 60min, seguido do teste de germinação conduzido nas mesmas temperaturas do experimento anterior, na ausência e presença de luz. Foram avaliados a porcentagem final e o índice de velocidade de germinação das sementes. Os resultados mostraram que (a) a manutenção das sementes no interior dos frutos é uma alternativa viável para o armazenamento durante o período adotado; (b) as sementes recém-coletadas são indiferentes à luz, nas duas temperaturas testadas; (c) as sementes recém-coletadas e as armazenadas germinam em maior velocidade a 25ºC; (d) em sementes armazenadas, a imersão em ácido sulfúrico por 10min é suficiente para superar a dormência; (e) em sementes recém-coletadas, a imersão em ácido sulfúrico por 20 a 30min favorece a porcentagem e a velocidade de germinação.

Análise de antenas utilizando substrato cerâmico, zpt, produzido por síntese auto propagante para aplicações em sistemas de micro-ondas

Ceramic substrates have been investigated by researchers around the world and has achieved a high interest in the scientific community, because they had high dielectric constants and excellent performance in the structures employed. Such ceramics result in miniaturized structures with dimensions well reduced and high radiation efficiency. In this work, we have used a new ceramic material called lead zinc titanate in the form of Zn0,8Pb0,2TiO3, capable of being used as a dielectric substrate in the construction of various structures of antennas. The method used in constructing the ceramic combustion synthesis was Self- Sustained High Temperature (SHS - "Self-Propagating High-Temperature Synthesis") which is defined as a process that uses highly exothermic reactions to produce various materials. Once initiated the reaction area in the reaction mixture, the heat generated is sufficient to become self-sustaining combustion in the form of a wave that propagates converting the reaction mixture into the product of interest. Were analyzed aspects of the formation of the composite Zn0,8Pb0,2TiO3 by SHS powders and characterized. The analysis consisted of determining the parameters of the reaction for the formation of the composite, as the ignition temperature and reaction mechanisms. The production of composite Zn0,8Pb0,2TiO3 by SHS performed in the laboratory, was the result of a total control of combustion temperature and after obtaining the powder began the development of ceramics. The product was obtained in the form of regular, alternating layers of porous ceramics and was obtained by uniaxial pressing. 10 The product was characterized by analysis of dilatometry, X-ray diffraction analysis and scanning electron microscopy. One of the contributions typically defined in this work is the development of a new dielectric material, nevertheless presented previously in the literature. Therefore, the structures of the antennas presented in this work consisted of new dielectric ceramics based Zn0,8Pb0,2TiO3 usually used as dielectric substrate. The materials produced were characterized in the microwave range. These are dielectrics with high relative permittivity and low loss tangent. The Ansoft HFSS, commercial program employee, using the finite element method, and was used for analysis of antennas studied in this work

Uma fonte chaveada de 50kW com correção de fator de potência para alimentação de uma tocha de plasma Indutiva utilizando técnicas de controle digital

This work deals with the development of an experimental study on a power supply of high frequency that provides the toch plasmica to be implemented in PLASPETRO project, which consists of two static converters developed by using Insulated Gate Bipolar Transistor (IGBT). The drivers used to control these keys are triggered by Digital Signal Processor (DSP) through optical fibers to reduce problems with electromagnetic interference (EMI). The first stage consists of a pre-regulator in the form of an AC to DC converter with three-phase boost power factor correction which is the main theme of this work, while the second is the source of high frequency itself. A series-resonant inverter consists of four (4) cell inverters operating in a frequency around 115 kHz each one in soft switching mode, alternating itself to supply the load (plasma torch) an alternating current with a frequency of 450 kHz. The first stage has the function of providing the series-resonant inverter a DC voltage, with the value controlled from the power supply provided by the electrical system of the utility, and correct the power factor of the system as a whole. This level of DC bus voltage at the output of the first stage will be used to control the power transferred by the inverter to the load, and it may vary from 550 VDC to a maximum of 800 VDC. To control the voltage level of DC bus driver used a proportional integral (PI) controller and to achieve the unity power factor it was used two other proportional integral currents controllers. Computational simulations were performed to assist in sizing and forecasting performance. All the control and communications needed to stage supervisory were implemented on a DSP

Envelhecimento ambiental acelerado em PRF a base de tecidos híbridos kevlar/vidro: propriedades e instabilidade estrutural

There are a number of damaging mechanisms that various materials can suffer in service. However, when working with polymer composite materials, this is something that requires analysis, especially when exposed to adverse environmental conditions. Thus, the objective of the present thesis is the study of the direct influence of environmental aging and the form of hybridization of the reinforcement woven on the structural stability, surfacedegradation and fracture process of polymer composites laminates. For this, the development of two polymer composite laminates was necessary, where one of them was reinforced with a bi-directional woven with hybrid strandsofkevlar-49/glass-Efibers, and the other also with a bi-directionalwoven, however with weft and warpformed of alternating strandsof Kevlar-49 fibers and glass-E fiber The reinforcementwoven are industrially manufactured. Both laminates use a polyester resin as a matrixand are made up of four layers each. All laminates were industrially prepared by the hand lay-up method of manufacturing. To do this, test specimens were manufactured of the respective laminates and submitted to environmental aging accelerated through the aging chamber. They were exposed to alternating cycles of UV radiation and moisture (heated steam) for a standard defined period. At the end of the exposure period the specimens were subjected to mechanical tests of uniaxial tensile and bending in three points and to the characterizationsof the fracture and surface deterioration. In addition, they were submitted to a structural degradation assessment by the measurement of mass variation technique (MMVT) and the measurement of thickness variation technique (MTVT), this last technique being developed in this thesis. At the end of the analysis it was observed that the form of hybridization of the reinforcement woven and the aging process directly influence with losses or gain in mechanical properties, with losses in the structural degradation and in the formation and propagation of damage mechanism of the developedcomposite laminates

Efeitos da radiação uv, temperatura e vapor aquecido nos compósitos poliméricos: monitoramento, instabilidade estrutural e fratura

The application of composite materials and in particular the fiber-reinforced plastics (FRP) has gradually conquered space from the so called conventional materials. However, challenges have arisen when their application occurs in equipment and mechanical structures which will be exposed to harsh environmental conditions, especially when there is the influence of environmental degradation due to temperature, UV radiation and moisture in the mechanical performance of these structures, causing irreversible structural damage such as loss of dimensional stability, interfacial degradation, loss of mass, loss of structural properties and changes in the damage mechanism. In this context, the objective of this thesis is the development of a process for monitoring and modeling structural degradation, and the study of the physical and mechanical properties in FRP when in the presence of adverse environmental conditions (ageing). The mechanism of ageing is characterized by controlled environmental conditions of heated steam and ultraviolet radiation. For the research, it was necessary to develop three polymer composites. The first was a lamina of polyester resin reinforced with a short glass-E fiber mat (representing the layer exposed to ageing), and the other two were laminates, both of seven layers of reinforcement, one being made up only of short fibers of glass-E, and the other a hybrid type reinforced with fibers of glass-E/ fibers of curaua. It should be noted that the two laminates have the lamina of short glass-E fibers as a layer of the ageing process incidence. The specimens were removed from the composites mentioned and submitted to environmental ageing accelerated by an ageing chamber. To study the monitoring and modeling of degradation, the ageing cycles to which the lamina was exposed were: alternating cycles of UV radiation and heated steam, a cycle only of UV radiation and a cycle only of heated steam, for a period defined by norm. The laminates have already undergone only the alternating cycle of UV and heated steam. At the end of the exposure period the specimens were subjected to a structural stability assessment by means of the developed measurement of thickness variation technique (MTVT) and the measurement of mass variation technique (MMVT). Then they were subjected to the mechanical tests of uniaxial tension for the lamina and all the laminates, besides the bending test on three points for the laminates. This study was followed by characterization of the fracture and the surface degradation. Finally, a model was developed for the composites called Ageing Zone Diagram (AZD) for monitoring and predicting the tensile strength after the ageing processes. From the results it was observed that the process of degradation occurs Abstract Raimundo Nonato Barbosa Felipe xiv differently for each composite studied, although all were affected in certain way and that the most aggressive ageing process was that of UV radiation, and that the hybrid laminated fibers of glass-E/curaua composite was most affected in its mechanical properties

Análise tribológica de um sistema de acionamento alternativo de pigs para a indústria do petróleo

It is analyzed through the concepts of tribology and mechanical contact and damage the suggestion of implementing a backup system for traction and passage of Pipeline Inspection Gauge (Pig) from the inside of pipelines. In order to verify the integrity of the pipelines, it is suggested the possibility of displacement of such equipment by pulling wires with steel wires. The physical and mechanical characteristics of this method were verified by accelerated tests in the laboratory in a tribological pair, wire versus a curve 90. It also considered the main mechanisms of wear of a sliding system with and without lubricant, in the absence and presence of contaminants. To try this, It was constructed a test bench able to reproduce a slip system, work on mode back-and-forth ("reciprocation"). It was used two kinds of wires, a galvanized steel and other stainless steel and the results achieved using the two kinds of steel cables were compared. For result comparative means, it was used steel cables with and without coating of Poly Vinyl Chloride (PVC). The wires and the curves of the products were characterized using metallographic analysis, microhardness Vickers tests, X-ray diffraction (XRD), X-Ray Refraction (XRF) and tensile tests. After the experiments were analyzed some parameters that have been measurable, it demonstrates to the impracticality of this proposed method, since the friction force and the concept of alternating request at the contact between the strands of wire and the inner curves that are part ducts caused severe wear. These types of wear are likely to cause possible failures in future products and cause fluid leaks

Desenvolvimento de um laminado compósito híbrido a base de fibras de vidro/licurí

This research work is based, in search of reinforcement s vegetable alternative to polymer composites. The idealization of making a hybrid composite reinforced with vegetable fibers licuri with synthetic fibers is a pioneer in this area. Thus was conceived a hybrid composite laminate consisting of 05 (five) layers being 03 (three) webs of synthetic fibers of glass and E-02 (two) unidirectional fabrics of vegetable fibers licuri. In the configuration of the laminate layers have alternating distribution. The composite laminate was manufactured in Tecniplas Commerce & Industry LTD, in the form of a card through the manufacturing process of hand lay up. Licuri fibers used in making the foil were the City of Mare Island in the state of Bahia. After cooking and the idealization of the hybrid composite laminate, the objective of this research work has focused on evaluating the performance of the mechanical properties (ultimate strength, stiffness and elongation at break) through uniaxial tensile tests and three point bending. Comparative studies of the mechanical properties and as well as among other types of laminated hybrid composites studied previously, were performed. Promising results were found with respect to the mechanical properties of strength and stiffness to the hybridization process idealized here. To complement the entire study were analyzed in terms of macroscopic and microscopic characteristics of the fracture for all tests.

Influência da umidade nas propriedades mecânicas dos compósitos poliméricos híbridos (sisal/ vidro)

This study aims to evaluate the mechanical properties of polymer matrix composites reinforced with sisal fabric bidirectional tissue (Agave sisalana,) and E-glass fibers, containing the following configuration: a polymer matrix hybrid composite (Polyester Resin orthophalic) reinforced with three (3) layers of glass fibers and alternating-2 (two) layers of bidirectional sisal fabric, and finally a composite of polymer matrix reinforced with five (5) layers of glass fiber mat-type E. For this purpose as first step, the preparation of by sisal, since they are not on the market. The composites were made by manual lamination (Hand lay-up) and evaluated for tensile properties and three point bending both in the dry, and wet conditions aswele as immersed in oil. Macroscopic and microscopic characteristics of the materialsweve awalysed, after the completion of the mechanical tests. After the studies, it was proven that the sisal fiber decreases the tensile stiffness of the material above 50% for both situations studied the tensile strength of the material decreases by approximately 40% for the cases mentioned, and when compared to the specific strength stiffness values drop to 14.6% and 29.02% respectively for the dry state only. Constants for bending the values were are to approximately 50% to 25% for strength and stiffness of the material for the cases dry, wet and immersed in oil. Under the influence of tension fluids do not interfere in the stiffness of the material for the bending tests, the same does not occur with the resistance, and these values are modified only in the cases stiffness and flexural strength

Duração do teste de germinação de Brachiaria brizantha cv. marandu (Hochst. ex A. Rich.) Stapf

O presente trabalho objetivou determinar o tempo mínimo necessário à realização do teste de germinação para sementes de B. brizantha cv. Marandu, o método de superação de dormência e a condição de temperatura que proporcionem a maior germinação no menor tempo. Numa primeira etapa, realizou-se o teste de germinação em trinta lotes de sementes, sob duas condições de temperaturas (15-35ºC e 20-35ºC), avaliadas em conjunto com três métodos para a superação de dormência (H2SO4, KNO3 e Controle), constituindo seis tratamentos. Realizaram-se contagens diárias da germinação para a determinação da data mais apropriada para o término do teste. Na segunda etapa, realizaram-se testes de germinação em oito lotes de diferentes níveis de vigor, utilizando-se os mesmos seis tratamentos e com encerramento do teste nas datas definidas na primeira etapa. Conclui-se que, para o teste de germinação de B. brizantha, a escarificação com H2SO4 e a temperatura de 20-35ºC são tratamentos que resultam na maior germinação em um menor tempo, possibilitando o encerramento do teste aos 11 dias após a semeadura.

Duração do teste de germinação do capim-tanzânia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Densidades de palha e condições de luminosidade na germinação de sementes de Euhphorbia heterophylla

It was studied the influence of sugarcane straw density and light conditions on the germination of seeds of Euphorbia heterophylla under controlled conditions. The experimental design was completely randomized design with four replications of 50 seeds, and the treatments were arranged in a 6 x 5 factorial, with six amount of sugarcane straw (0, 8, 10, 12, 14 and 16 t ha(-1)) and 5 types of light (constant light, constant darkness, alternating light and dark, short red and far red). The seeds were germinated in plastic type boxes covered by overlapping layers of straw and kept in germination. Assessments of germination were daily computing the normal seedlings, when they presented protusion roots visible and calculated the germination speed index (IGS). It was observed that the increase of different densities of straw and different wave lengths provided germination ranged from 83 to 97% and IGS between 9.85 to 15.36. The different densities of straw and wavelength did not suppress the germination of E. heterophylla. Therefore, the species was insensitive to light, so the presence of raw sugarcane system can't be considered a potential tool for controlling this species.

Clones promissores de seringueira para a região do Vale do Ribeira, São Paulo

Este trabalho objetivou apresentar resultados da primeira seleção de clones de seringueira (Hevea brasiliensis (Willd. ex Adr. de Juss.) Muell.Arg.) da série IAC 300, e amazônicos das séries IAN e Fx, em experimento de pequena escala, visando produção, crescimento e resistência ao mal-das-folhas. A produção e o vigor de 20 clones foram avaliados por dois e nove anos, respectivamente, em PariqüeraAçú, no Vale do Ribeira, SP. Os clones IAC 301, IAC 304, IAC 306 e IAC 319 produziram satisfatoriamente nos dois primeiros anos de sangria. Os clones amazônicos IAN 6323, Fx 3864 e IAN 2903, com produções de 1.078 kg, 945 kg e 900 kg/ha/ano, respectivamente, foram superiores à testemunha IAN 873 (878 kg/ha/ano). Os clones selecionados apresentaram crescimento vigoroso, com extremos de perímetro do caule, na abertura do painel, de 37,40 cm (IAN 4493) a 53,75 cm (IAN 6323), e percentual de plantas aptas à sangria de 7,0% (IAN 4493) a 100% (IAN 6323 e IAC 302), exceto os clones Fx 3899 e IAN 3044. O IAC 315, com 7,37 mm, mostrou maior espessura de casca virgem que o IAN 873 (6,44 mm). Os clones IAC 320, IAC 306 e IAC 315 foram os mais resistentes ao Microcyclus ulei.

Estudo da recuperação de óleo por drenagem gravitacional assistida por injeção de vapor

Steam assisted gravity drainage process (SAGD) involves two parallel horizontal wells located in a same vertical plane, where the top well is used as steam injector and the bottom well as producer. The dominant force in this process is gravitational. This improved oil recovery method has been demonstrated to be economically viable in commercial projects of oil recovery for heavy and extra heavy oil, but it is not yet implemented in Brazil. The study of this technology in reservoirs with characteristics of regional basins is necessary in order to analyze if this process can be used, minimizing the steam rate demand and improving the process profitability. In this study, a homogeneous reservoir was modeled with characteristics of Brazilian Northeast reservoirs. Simulations were accomplished with STARS , a commercial software from Computer Modelling Group, which is used to simulate improved oil recovery process in oil reservoirs. In this work, a steam optimization was accomplished in reservoirs with different physical characteristics and in different cases, through a technical-economic analysis. It was also studied a semi-continuous steam injection or with injection stops. Results showed that it is possible to use a simplified equation of the net present value, which incorporates earnings and expenses on oil production and expenses in steam requirement, in order to optimize steam rate and obtaining a higher net present value in the process. It was observed that SAGD process can be or not profitable depending on reservoirs characteristics. It was also obtained that steam demand can still be reduced injecting in a non continuous form, alternating steam injection with stops at several time intervals. The optimization of these intervals allowed to minimize heat losses and to improve oil recovery