Structural and photoelectric studies on double barrier quantum well infrared detectors

GaAs/AlAs/GaAlAs double barrier quantum well (DBQW) structures are employed for making the 3 similar to 5 mu m photovoltaic infrared (IR) detectors with a peak detectivity of 5x10(11) cmHz(1/2)/W at 80K. The double crystal x-ray diffraction is combined with synchrotron radiation x-ray analysis to determine the exact thickness of GaAs, AlAs and GaAlAs sublayers. The interband photovoltaic (PV) spect ra of the DBQW sample and the spectral response of the IR photocurrent of the devices are measured directly by edge excitation method, providing the information about spatial separation processes of photogenerated carriers in the multiquantum wells and the distribution of built-in field in the active region.

东北地区千里光属、华千里光属及狗舌草属分类学研究

本文在前人工作的基础上，对东北产千里光属Senecio植物进行了形态分类、花解剖及花粉形成结构的研究。结果表明：1. 华千里光组Sect. Sinosenecio和狗舌草组sect. Tephroseris在形态和花结构上与千里光属Senecio植物有显著差异，应从千里光属中独立出来，自立为属，即：华千里光属Sinosenecio对狗舌草属Tephroseriso 2. 东北产华千里光属只有一种，即朝鲜千里光Sinosenecio Koreanus (Kom.) B. Nord。3. 东北产狗舌草属分为2组，共5种1变型，其中T. Campestris (Retz.) Reichb.f.spathulatus (Miq.) R. yin et C. y. Li为新组合，并订正了狗舌草T. campestris (Retz.) Reichb的拉丁名。4. 东北产千里光属分为2组，共5种，2变种1变型。5. 狗舌草属和千里光属花粉形态基本相似，都为球形，表面具刺，3孔沟型。花粉形成不能作为划分属的依据。本文还详细描述了每个种的形态学特征，地理分布和文献考证，并附有每个种的叶形。花解剖图及花粉的扫描电镜、光镜照片。还有分属及分种检索表。

A multi-moment finite volume formulation for shallow water equations on unstructured mesh

A novel and accurate finite volume method has been presented to solve the shallow water equations on unstructured grid in plane geometry. In addition to the volume integrated average (VIA moment) for each mesh cell, the point values (PV moment) defined on cell boundary are also treated as the model variables. The volume integrated average is updated via a finite volume formulation, and thus is numerically conserved, while the point value is computed by a point-wise Riemann solver. The cell-wise local interpolation reconstruction is built based on both the VIA and the PV moments, which results in a scheme of almost third order accuracy. Efforts have also been made to formulate the source term of the bottom topography in a way to balance the numerical flux function to satisfy the so-called C-property. The proposed numerical model is validated by numerical tests in comparison with other methods reported in the literature. (C) 2010 Elsevier Inc. All rights reserved.

岷江干旱河谷三种蔷薇植物繁殖更新研究

繁殖更新是植物生活史的重要阶段，在退化生态系统中，植物繁殖更新能力往往较差，是植被恢复的限制环节，因而也成为恢复研究重点和核心。本研究选择岷江干旱河谷广泛分布的三种蔷薇：多苞蔷薇（R. multibracteata）、黄蔷薇（R. hugonis）和川滇蔷薇（R. soulieana）为研究对象，通过野外调查，在查明其生长、繁殖更新状况的基础上，采用控制和模拟实验，对种子和幼苗阶段进行了深入研究，综合分析更新潜力，并提出相对应的促进更新和植被恢复措施。主要结论如下： 1）三种蔷薇在岷江干旱河谷广泛分布，生长和繁殖状况良好，结实量大。各生长指标：株高、基径和冠幅，繁殖指标：结实数量、重量和单果重量都具有显著的空间差异性。基径对多苞蔷薇结实量影响最大；而冠幅对黄蔷薇结实量影响最大。海拔和纬度是对蔷薇生长和繁殖影响最大的环境因素，随着海拔和纬度的升高，植株生长更高大，结实量增加；坡度和坡向对其生长和繁殖也有一定影响，随着坡度 和坡向增加，蔷薇生长和结实受到抑制。 2）三种蔷薇在岷江干旱河谷更新现状不佳, 但更新潜力大。活力种子比率低，动物取食以及两年生幼苗的大量死亡是蔷薇更新的主要限制因素。多苞蔷薇和黄蔷薇的结实率低，川滇蔷薇较高。三种蔷薇种子产量大，但种子质量较差，更新具有充足的种源。三种蔷薇都能形成持久种子库，种子库中种子总量大，但有效种子少，黄蔷薇被动物啃食的比例很高，多苞蔷薇和川滇蔷薇也有一部分种子受到动物破坏。三种蔷薇幼苗库组成特征表现为，当年生幼苗所占比例很高，年龄较大幼苗所占比例小。 3）三种蔷薇都具有不同程度休眠，未经处理种子的发芽率极低。黄蔷薇休眠程度最深，为深度生理休眠；多苞蔷薇为中度生理休眠；川滇蔷薇为非深度生理休眠。三种蔷薇种子在形态上发育成熟，种皮具有透水性。蔷薇果果肉和瘦果中含有抑制物质，其浸泡液抑制了油菜种子萌发，果肉抑制作用更强，果肉和瘦果浸泡液的抑制程度分别为：川滇蔷薇>黄蔷薇>多苞蔷薇。切割和硫酸腐蚀提高了川滇蔷薇种子的发芽能力，而对多苞蔷薇和黄蔷薇没有影响。完全去除瘦果果皮和种皮提高了多苞蔷薇种子发芽率，但对黄蔷薇没有影响。赤霉素和烟水对蔷薇种子萌发没有促进作用。三种蔷薇打破休眠所需低温层积时间分别为：黄蔷薇>多苞蔷薇>川滇蔷薇。对于多苞蔷薇和川滇蔷薇，层积前对种子进行硫酸腐蚀或暖温层积能缩短低温层积时间，提高发芽率。对于多苞蔷薇，变温层积中暖温层积和低温层积具有一定的负补性，即延长暖温层积可以缩短种子萌发对低温层积的需要。 4）多苞蔷薇种子形态特征和种子休眠与萌发在不同海拔梯度间存在较大差异。种子采集时间、采集季节和干藏影响多苞蔷薇和川滇蔷薇的种子休眠。多苞蔷薇果实大小、种子大小和千粒重、种皮厚度随海拔升高而增加，而种子饱满率和活力随海拔升高而降低，种子休眠程度也随海拔升高而增加。种皮厚度与种子大小、千粒重成正相关关系，硫酸腐蚀后的种子经过不同时间的低温层积后，种子发芽率与种皮厚度、种子大小、千粒重、海拔成正相关关系。2006 年采集川滇蔷薇和多苞蔷薇种子休眠程度较2005 年低。种子休眠随种子年龄增加而减弱。高温和干旱能减轻多苞蔷薇和川滇蔷薇种子休眠。 5）三种蔷薇的生长和生物量积累在干旱胁迫条件下受到抑制，而生物量分配、叶片形态特征和水分利用特征等都发生了变化。三种蔷薇的根、茎、叶各器官生物量以及总生物量等在干旱胁迫下明显减小，叶片脱落数量增加。在干旱胁迫条件下，较多的生物量分配到地下部分，从而这使R/S 明显增加。比叶面积（SLA）和冠层面积比（LAR）对干旱胁迫的反应不敏感，仅有部分物种在干旱胁迫条件下发生了变化，并且其变化特点在不同年龄幼苗之间有一定差异。干旱胁迫对WUE 的影响在不同物种间存在差异。多苞蔷薇和黄蔷薇的WUE 随着干旱胁迫的增加而增大， 而川滇蔷薇的WUE 则随干旱胁迫增加而减小。在干旱胁迫条件下，多苞蔷薇和黄蔷薇叶片脱落量和生物量减小幅度较川滇蔷薇大，表明其抗旱能力较强。在干旱胁迫条件，三种蔷薇两年生幼苗的生物量减小幅度较当年生幼苗小，表明两年生幼苗的抗旱能力更强。 6）两种植被恢复措施中，幼苗移栽比播种具有更好的植被恢复效果。播种后，蔷薇种子的发芽率较高，但出苗率都很低，即使出苗，幼苗也几乎在一月内全部死亡。 三种微生境条件下（灌木、半灌木和裸地），种子出苗和幼苗成活没有差异。移栽幼苗总体死亡率都比较低，小于20％。特别是两年生幼苗死亡率更低，小于2％。移栽后的幼苗生长状况良好，在整个生长季中，各生长指标不断增加。生境对幼苗的存活率没有显著影响，但对于幼苗的生长和生物量积累有一定影响，裸地更有利于幼苗生长和生物量积累。与当年生幼苗相比，两年生幼苗具有更高的成活率。总之，三种蔷薇在干旱河谷分布广泛、生长繁殖状况良好，结实量大，具有丰富种源，繁殖更新潜力大，但繁殖更新状况不佳；种子散布后动物对种子的取食、种子的深度休眠过程、种子出苗以及当年生幼苗的存活和定居是更新的主要限制环节。水分是影响结实、种子休眠解除和萌发，幼苗存活和定居的最主要的限制因素。在植被恢复中，应在种子成熟季节大量采集种子，在室内打破休眠后进行人工播种，培育两年生幼苗，通过幼苗移栽方式进行植被恢复。川滇蔷薇应栽种在相对湿润的过渡区，而多苞蔷薇和黄蔷薇可以应用于核心区植被恢复。 Regeneration is an important phase in plant life cycle. It has been a key component of ecological restoration in degradation ecosystem in which plants commonly has poor regeneration. In this paper, we investigated the natural growth, propagation and regeneration status of native three rose species, Rosa multibracteata, R. hugonis and R. soulieana, and analysis the limitation in seed germination and seedling establishment stages. Advice on facilitating the use of these plants in restoration based on the results has been proposed. The results were as follows: 1) Three rose plants widely distributed in the dry valley of the Minjiang River, and made a good performance in growth and propagation. There were significant spatial differences in each growth parameter, such as ramet height, basal diameter, crown diameter and propagation parameters including hip number of a clump, hip mass of a clump and a hip mass. Basa diameter was the most important growth parameter influencing fruit number for R. multibracteata and crown diameter was for R. hugoni. Altitude and latitude had the greatest effect on the growth and propagation of rose plants among environmental conditions. Each parameter of growth and propagation increased with the increase of altitude and latitude. In addition, the increase of slope and aspect limited the growth and propagation. 2) Three rose plants had poor natural regeneration, but great regeneration potential. Low seed viability, predation and higher mortality of current year old seedlings were the limitation in regeneration. R. multibracteata and R. hugonis had higher fruiting rates than R. souliean. All three plants produced a great number of seeds, while their viability was poor. Three rose plants had persistent seed banks, with high total seed number but very low viable seed density. Predation was most severe in R. hugonis, and it also existed to some degree in R. multibracteata and R. soulieana. The seedling age-structure was characteristic of current-year seedlings predominating and few older seedlings were observed. 3) Three rose seeds were dormant and untreated seeds germinated with very low germination percentages. The rose seeds had morphological mature embryos, and achenes were permeable. Some inhabit substances existed in hips and achenes for the extracts of hips and achenes inhibited germination of Brassica campestris. The inhibition effect of the extracts of three rose hip and achenes was R. soulieana>R. hugonis>R. multibracteata. Mechanical and H2SO4 scarification increased R. soulieana germination but had no effect on germination of R. hugonis and R. multibracteata seeds. Full removal of pericarp and testa improved the germination of R. multibracteata but did not affect R. hugonis germination. GA3 and smoke water had no positive effect on rose seed germination. The periods of cold stratification required to released seed dormancy was R. hugonis > R. soulieana >R. multibracteata. H2SO4 scarification and warm stratification shortened cold stratification to release dormancy for R. soulieana and R. multibracteata. Warm stratification had complementary effect for cold stratification, i.e. the longer warm stratification seeds received, the shorter cold stratification were required to obtain the same germination percentage. Three rose seeds had different kinds of dormancy; R. hugonis has deep physiological dormancy, R. multibracteata with intermediate physiological dormancy and R. souliean non-deep physiological dormancy. 4）The seeds traits and dormancy of R. multibracteata showed significant difference across altitudes. Year and season of seed collection had significant effect on seed dormancy for both R. souliean and R. multibracteata. Hip size, seed size, seed weight, seed coat thickness and seed dormancy level increased with the increase of the altitude. There were positive relations between seed coat thickness with seed size and seed weight. Germination percentage of seeds treated with H2SO4 scarification following different periods of cold stratification showed positive relation with seed coat thickness, seed size, seed weight and altitude. Seeds of R. souliean and R. multibracteata collected in 2006 had low dormancy level than those collected in 2005. Seed dormancy decreased with increasing seeds age. High temperature and drought were associated with low dormancy level. 5) Seedling growth, the total dry mass and their components of seedlings were reduced, while leaf senescence accelerated under drought stress. More biomass allocation to root system resulted in higher R/S ratio under drought. Water-use efficiency (WUE) of R. multibracteata and R. hugonis increased, while it declined for R. soulieana under drought stress. R. soulieana seedlings had poor drought-resistance capacity it had more senescent leaves, and its reduction of biomass was stronger than two other rose plants under drought. The reduction degree of one year old seedlings under drought stress was slighter than that of current year seedlings. Therefore, one year old seedling was more drought-resistent compared to current year seedlings. 6）Planting seedlings may have better effect in comparison with direct seeding. Most seeds germinated after seeding, but seedling emergence was very low. More than 80 % seedlings from direct seeding died within a months after emergence. Seedling emergence and survival rate did not show difference among microhabitats. Mortality rates of seedlings artificially planted in microhabitats were general lower than 20 %, and the mortality rate of one year old seedlings was lower than 2 %. Each grow parameter including plant height, leaf number and branch number continually increased after planting. Microhabitat type had effect on the growth parameter and biomass production, but it did not influence the seedling survival. Bare land tended to facilitate seedling growth. One year old seedlings had higher survival rate than current year seedlings. In conculsion, the three rose had wide distribution in the dry valley of the Minjiang River. They produced many seeds and had tolerance to drought stress to some degree. But they had poor regeneration in habitats may be caused by predation, seed dormancy，and high mortality in current year seedlings. We recommend that rose plants should be utilized in restoration by planting two-year old seedlings in spring. A large quantity of seeds should be collected artificially in autumn, release seed dormancy in room, and then cultivate two-year old seedlings by seeding in particular container. R. soulieana seedling probably be planted in transition area, and R. multibracteata and R. hugonis can be used in core area of the dry valley of the Minjiang River.

长白山主要树种耐旱性的研究

研究表明，全球增温可导致干旱趋势的发展，为了解东北主要森林分布区长白山广大低海拔地区阔叶红松林主要组成树种对干旱趋势的反应，通过PV���线技术测定不同树种的水分参数值，比较评价其耐旱能力，得到长白山阔叶红松林主要树种耐旱性从高到低依次为：山杨、蒙古柞、樟子松、红松、长白松、黑桦、春榆、色木、糠椴、紫椴、红皮云杉、白桦、臭松、水曲柳、核桃楸、黄菠萝

绿洲前沿地区多枝柽柳水分关系的特征及灌溉的影响

对塔克拉玛干沙漠南缘策勒绿洲前沿地区多枝柽柳 (Tamarixramosissima)进行了研究 ,生长季节和灌溉前后水分关系的特征表明 :多枝柽柳在生长季节保持了较高较稳定的清晨水势 ,植物能够平衡白天水分损失造成的水分亏缺 ,水分恢复状况良好。环境气候变化对渗透势等水分参数的影响不及植物水分恢复状况对它们的影响。除了个别数据 ,多枝柽柳水势和渗透势的降低幅度很小 ,更像是生长过程的结果 ,植物水分胁迫的特征并不明显。对比水分生理上对干旱胁迫的适应———渗透势的迅速降低和质外体水含量的增加 ,膨压消失点相对含水量(RWCp)和渗透势差值 (ΔΠ)等参数显示的生理特征表明 ,植物更加依靠稳定充足的水分供应来适应生长环境中极端的高水压差和与此相应的高大气蒸发要求。与此适应 ,植物和地下水发生了联系 ,并且一次性灌溉对植物水分状况的恢复基本没有帮助 ,保持地下水位稳定在根系的可吸收范围内成为保护绿洲前沿多枝柽柳长期存在的关键。多枝柽柳的水分特征属于中生植物的范畴 ,对极端环境的适应属于躲避的类型。

塔干南缘骆驼刺植被水分关系的研究(英文)

对塔克拉玛干沙漠———绿洲过渡带骆驼刺 (AlhagisparsifoliaShap .)水分关系的研究表明 :骆驼刺在夏季保持了正的膨压 ,一直较高较稳定的清晨水势说明植物水分恢复状况良好 ,植物得到了较好的水分供应 ;在 7月 ,干旱胁迫造成的水分亏缺并未影响植株正常的蒸腾作用 ,因而干旱引起的水分胁迫并未威胁到植被的存在。骆驼刺对干旱胁迫的水分生理适应主要体现在叶水平上 ,表现为饱和枝条的渗透势 (Πo)和膨压消失点的渗透势 (Πp)的差值 (ΔΠ)和相对含水量 (RWC)在膨压消失点间更大的变化、渗透调节的产生、较高较稳定的饱和枝条水分与干物质之比 (WCsat)和膨压消失点的相对含水量 (RWCp) ,以及较低的共质体水在总水分中的相对含量 (RWCsym)。但形态学上的特征 ,主要表现为深而发达的根系和蒸腾面积的减少 ,才是骆驼刺适应极端干旱环境的主要途径。非定期的夏季一次性灌溉对地下水位很低地区的骆驼刺植被水分状况的恢复没有帮助。

Epitaxy-Assisted Creation of PCBM Nanocrystals and Its Application in Constructing Optimized Morphology for Bulk-Heterojunction Polymer Solar Cells

PCBM (a C-60 derivative) is so far the most successful electron acceptor for bulk-heterojunction polymer photovoltaic (PV) cells. Here we present a novel method epitaxy-assisted creation of PCBM nanocrystals and their homogeneous distribution in the matrix using freshly cleaved mica sheet as the substrate. The highly matched epitaxy relationship between the unit cell of PCBM crystal and crystallographic (001) surface of mica induces abundant PCBM nuclei, which subsequently develop into nanoscale crystals with homogeneous dispersion in the composite film.

Enhanced charge collection in polymer photovoltaic cells by using an ethanol-soluble conjugated polyfluorene as cathode buffer layer

We report enhanced polymer photovoltaic (PV) cells by utilizing ethanol-soluble conjugated poly (9, 9-bis (6'-diethoxylphosphorylhexyl) fluorene) (PF-EP) as a buffer layer between the active layer consisting of poly(3-hexylthiophene)/[6, 6]-phenyl C61-butyric acid methyl ester blend and the Al cathode. Compared to the control PV cell with Al cathode, the introduction of PF-EP effectively increases the shunt resistance and improves the photo-generated charge collection since the slightly thicker semi-conducting PF-EP layer may restrain the penetration of Al atoms into the active layer that may result in increased leakage current and quench photo-generated excitons. The power conversion efficiency is increased ca. 8% compared to the post-annealed cell with Al cathode.

Progress in polymer solar cell

This review outlines current progresses in polymer solar cell. Compared to traditional silicon-based photovoltaic (PV) technology, the completely different principle of optoelectric response in the polymer cell results in a novel configuration of the device and more complicated photovoltaic generation process. The conception of bulk-heterojunction (BHJ) is introduced and its advantage in terms of morphology is addressed. The main aspects including the morphology of photoactive layer, which limit the efficiency and stability of polymer solar cell, are discussed in detail. The solutions to boosting up both the efficiency and stability (lifetime) of the polymer solar cell are highlighted at the end of this review.

Enthalpy/entropy compensation: Influence of DNA flanking sequence on the binding of 7-amino actinomycin D to its primary binding site in short DNA duplexes

The effect of the context of the flanking sequence on ligand binding to DNA oligonucleotides that contain consensus binding sites was investigated for the binding of the intercalator 7-amino actinomycin D. Seven self-complementary DNA oligomers each containing a centrally located primary binding site, 5'-A-G-C-T-3', flanked on either side by the sequences (AT)(n) or (AA)(n) (with n = 2, 3, 4) and AA(AT)(2), were studied. For different flanking sequences, (AA)(n)-series or (AT)(n)-series, differential fluorescence enhancements of the ligand due to binding were observed. Thermodynamic studies indicated that the flanking sequences not only affected DNA stability and secondary structure but also modulated ligand binding to the primary binding site. The magnitude of the ligand binding affinity to the primary site was inversely related to the sequence dependent stability. The enthalpy of ligand binding was directly measured by isothermal titration calorimetry, and this made it possible to parse the binding free energy into its energetic and entropic terms.

Novel soluble N-phenyl-carbazole-containing PPVs for light-emitting devices: Synthesis, electrochemical, optical, and electroluminescent properties

Novel PPV derivatives (PCA8-PV and PCA8-MEHPV) containing N-phenyl-carbazole units on the back-bone were successfully synthesized by the Wittig polycondensation of 3,6-bisformyl-N-(4-octyloxy-phenyl)carbazole with the corresponding tributyl phosphonium salts in good yields. The newly formed and dominant trans vinylene double bonds were confirmed by FT-IR and NMR spectroscopy. The polymers (with (M) over bar (w) of 6289 for PCA8-PV and 7387 for PCA8-MEHPV) were soluble in common organic solvents and displayed high thermal stability (T(g)s are 110.7 degreesC for PCA8-PV and 92.2 degreesC for PCA8-MEHPV, respectively) because of the incorporation of the N-phenyl-carbazole units. Cyclic voltammetry investigations (onsets: 0.8 V for PCA8-PV and 0.7 V for PCA8-MEHPV) suggested that the polymers possess enhanced hole injection/transport properties, which can be also attributed to the N-phenyl-carbazole units on the backbone. Both the single-layer and the double-layer light-emitting diodes (LEDs) that used the polymers as the active layer emitted a greenish-blue or bluish-green light (the maximum emissions located 494 nm for PCA8-PV and 507 nm for PCA8-MEHPV, respectively).

Phenylene vinylene-based electroluminescent polymers with electron transport block in the main chain

We report a new route for the design of soluble phenylene vinylene (PV) based electroluminescent polymers bearing electron-deficient oxadizole (OXD) and triazole (TZ) moieties in the main chains with the aryloxy linkage. Both series of the PV-based polymers were prepared by Wittig reaction. By properly adjusting the OXD and/or TZ content through copolymerization, we can achieve an enhanced balance of hole- and electron injections, such that the device efficiency is significantly improved. Light-emitting diodes fabricated from P1, P2, P3, P4, P5, P6, and P7 with the configuration of Indium-Tin Oxide (ITO)/Poly (styrene sulfonic acid) doped poly (ethylenedioxythiophene) (PEDOT)/polymer/Ca/Al, emit bright green light with the maximum peak around 500 nm. For the device using the optimal polymer (P4) as emitting layer, a maximum brightness of 1300 cd/m(2) at 20 V and a maximum luminance efficiency of 0.325 cd/A can be obtained.

Crystallization and melting behaviors of PPC-BS/PVA blends

The isothermal crystallization and melting behaviors of poly(propylene carbonate) end-capped with benzenesulfonyl/poly (vinyl alcohol) (PPC-BS/PVA) blends over rich PVA composition range were first investigated by differential scanning calorimetry (DSC). PPS-BS/PVA interaction parameter, chi(12), calculated from equilibrium melting temperature depression was -0.44, revealing miscibility of PPC-BS with PVA in the melt and favorable interactions. The temperature dependence of crystallization rate constant at initial crystallization stage was analyzed using the modified Lauritzen-Hoffman expression. The chain width, a(0), the thickness of a monomolecular layer, b(0), the fold and lateral surface-free energies, sigma(e) and sigma, and the work of chain folding, q, for neat PVA were first reckoned to be 4.50 Angstrom, 4.78 Angstrom, 76.0 erg.cm(-2), and 4.70 kcal.mol(-1), respectively. The values of sigma(e) and q for PVA in PPC-BS/PVA blends exhibited a maximum in the neighborhood of 10/90 PPC-BS/PV, respectively.

Investigation of covalency and spectrum shifts in 3d transition-metal compounds

By using a correction factor of d electron effects on bond, PV theory is applied to the calculation of chemical bond;parameters of d transition-metal compounds. Racah parameters and Mossbauer isomer shifts are calculated, and the results are agreement with the experimental values.