A high energy perspective of the co-evolution of black holes and their host galaxies

Thanks to the Chandra and XMM–Newton surveys, the hard X-ray sky is now probed down to a flux limit where the bulk of the X-ray background is almost completely resolved into discrete sources, at least in the 2–8 keV band. Extensive programs of multiwavelength follow-up observations showed that the large majority of hard X–ray selected sources are identified with Active Galactic Nuclei (AGN) spanning a broad range of redshifts, luminosities and optical properties. A sizable fraction of relatively luminous X-ray sources hosting an active, presumably obscured, nucleus would not have been easily recognized as such on the basis of optical observations because characterized by “peculiar” optical properties. In my PhD thesis, I will focus the attention on the nature of two classes of hard X-ray selected “elusive” sources: those characterized by high X-ray-to-optical flux ratios and red optical-to-near-infrared colors, a fraction of which associated with Type 2 quasars, and the X-ray bright optically normal galaxies, also known as XBONGs. In order to characterize the properties of these classes of elusive AGN, the datasets of several deep and large-area surveys have been fully exploited. The first class of “elusive” sources is characterized by X-ray-to-optical flux ratios (X/O) significantly higher than what is generally observed from unobscured quasars and Seyfert galaxies. The properties of well defined samples of high X/O sources detected at bright X–ray fluxes suggest that X/O selection is highly efficient in sampling high–redshift obscured quasars. At the limits of deep Chandra surveys (∼10−16 erg cm−2 s−1), high X/O sources are generally characterized by extremely faint optical magnitudes, hence their spectroscopic identification is hardly feasible even with the largest telescopes. In this framework, a detailed investigation of their X-ray properties may provide useful information on the nature of this important component of the X-ray source population. The X-ray data of the deepest X-ray observations ever performed, the Chandra deep fields, allows us to characterize the average X-ray properties of the high X/O population. The results of spectral analysis clearly indicate that the high X/O sources represent the most obscured component of the X–ray background. Their spectra are harder (G ∼ 1) than any other class of sources in the deep fields and also of the XRB spectrum (G ≈ 1.4). In order to better understand the AGN physics and evolution, a much better knowledge of the redshift, luminosity and spectral energy distributions (SEDs) of elusive AGN is of paramount importance. The recent COSMOS survey provides the necessary multiwavelength database to characterize the SEDs of a statistically robust sample of obscured sources. The combination of high X/O and red-colors offers a powerful tool to select obscured luminous objects at high redshift. A large sample of X-ray emitting extremely red objects (R−K >5) has been collected and their optical-infrared properties have been studied. In particular, using an appropriate SED fitting procedure, the nuclear and the host galaxy components have been deconvolved over a large range of wavelengths and ptical nuclear extinctions, black hole masses and Eddington ratios have been estimated. It is important to remark that the combination of hard X-ray selection and extreme red colors is highly efficient in picking up highly obscured, luminous sources at high redshift. Although the XBONGs do not present a new source population, the interest on the nature of these sources has gained a renewed attention after the discovery of several examples from recent Chandra and XMM–Newton surveys. Even though several possibilities were proposed in recent literature to explain why a relatively luminous (LX = 1042 − 1043erg s−1) hard X-ray source does not leave any significant signature of its presence in terms of optical emission lines, the very nature of XBONGs is still subject of debate. Good-quality photometric near-infrared data (ISAAC/VLT) of 4 low-redshift XBONGs from the HELLAS2XMMsurvey have been used to search for the presence of the putative nucleus, applying the surface-brightness decomposition technique. In two out of the four sources, the presence of a nuclear weak component hosted by a bright galaxy has been revealed. The results indicate that moderate amounts of gas and dust, covering a large solid angle (possibly 4p) at the nuclear source, may explain the lack of optical emission lines. A weak nucleus not able to produce suffcient UV photons may provide an alternative or additional explanation. On the basis of an admittedly small sample, we conclude that XBONGs constitute a mixed bag rather than a new source population. When the presence of a nucleus is revealed, it turns out to be mildly absorbed and hosted by a bright galaxy.

Design and control techniques of optical networks

The world of communication has changed quickly in the last decade resulting in the the rapid increase in the pace of peoples’ lives. This is due to the explosion of mobile communication and the internet which has now reached all levels of society. With such pressure for access to communication there is increased demand for bandwidth. Photonic technology is the right solution for high speed networks that have to supply wide bandwidth to new communication service providers. In particular this Ph.D. dissertation deals with DWDM optical packet-switched networks. The issue introduces a huge quantity of problems from physical layer up to transport layer. Here this subject is tackled from the network level perspective. The long term solution represented by optical packet switching has been fully explored in this years together with the Network Research Group at the department of Electronics, Computer Science and System of the University of Bologna. Some national as well as international projects supported this research like the Network of Excellence (NoE) e-Photon/ONe, funded by the European Commission in the Sixth Framework Programme and INTREPIDO project (End-to-end Traffic Engineering and Protection for IP over DWDM Optical Networks) funded by the Italian Ministry of Education, University and Scientific Research. Optical packet switching for DWDM networks is studied at single node level as well as at network level. In particular the techniques discussed are thought to be implemented for a long-haul transport network that connects local and metropolitan networks around the world. The main issues faced are contention resolution in a asynchronous variable packet length environment, adaptive routing, wavelength conversion and node architecture. Characteristics that a network must assure as quality of service and resilience are also explored at both node and network level. Results are mainly evaluated via simulation and through analysis.

Reduced-order modelling, circuit-level design and SOI fabrication of microelectromechanical resonators

This thesis deals with two important research aspects concerning radio frequency (RF) microresonators and switches. First, a new approach for compact modeling and simulation of these devices is presented. Then, a combined process flow for their simultaneous fabrication on a SOI substrate is proposed. Compact models for microresonators and switches are extracted by applying mathematical model order reduction (MOR) to the devices finite element (FE) description in ANSYS c° . The behaviour of these devices includes forms of nonlinearities. However, an approximation in the creation of the FE model is introduced, which enables the use of linear model order reduction. Microresonators are modeled with the introduction of transducer elements, which allow for direct coupling of the electrical and mechanical domain. The coupled system element matrices are linearized around an operating point and reduced. The resulting macromodel is valid for small signal analysis around the bias point, such as harmonic pre-stressed analysis. This is extremely useful for characterizing the frequency response of resonators. Compact modelling of switches preserves the nonlinearity of the device behaviour. Nonlinear reduced order models are obtained by reducing the number of nonlinearities in the system and handling them as input to the system. In this way, the system can be reduced using linear MOR techniques and nonlinearities are introduced directly in the reduced order model. The reduction of the number of system nonlinearities implies the approximation of all distributed forces in the model with lumped forces. Both for microresonators and switches, a procedure for matrices extraction has been developed so that reduced order models include the effects of electrical and mechanical pre-stress. The extraction process is fast and can be done automatically from ANSYS binary files. The method has been applied for the simulation of several devices both at devices and circuit level. Simulation results have been compared with full model simulations, and, when available, experimental data. Reduced order models have proven to conserve the accuracy of finite element method and to give a good description of the overall device behaviour, despite the introduced approximations. In addition, simulation is very fast, both at device and circuit level. A combined process-flow for the integrated fabrication of microresonators and switches has been defined. For this purpose, two processes that are optimized for the independent fabrication of these devices are merged. The major advantage of this process is the possibility to create on-chip circuit blocks that include both microresonators and switches. An application is, for example, aswitched filter bank for wireless transceiver. The process for microresonators fabrication is characterized by the use of silicon on insulator (SOI) wafers and on a deep reactive ion etching (DRIE) step for the creation of the vibrating structures in single-crystal silicon and the use of a sacrificial oxide layer for the definition of resonator to electrode distance. The fabrication of switches is characterized by the use of two different conductive layers for the definition of the actuation electrodes and by the use of a photoresist as a sacrificial layer for the creation of the suspended structure. Both processes have a gold electroplating step, for the creation of the resonators electrodes, transmission lines and suspended structures. The combined process flow is designed such that it conserves the basic properties of the original processes. Neither the performance of the resonators nor the performance of the switches results affected by the simultaneous fabrication. Moreover, common fabrication steps are shared, which allows for cheaper and faster fabrication.

Essays on the political economy of European integration

Recently, a rising interest in political and economic integration/disintegration issues has been developed in the political economy field. This growing strand of literature partly draws on traditional issues of fiscal federalism and optimum public good provision and focuses on a trade-off between the benefits of centralization, arising from economies of scale or externalities, and the costs of harmonizing policies as a consequence of the increased heterogeneity of individual preferences in an international union or in a country composed of at least two regions. This thesis stems from this strand of literature and aims to shed some light on two highly relevant aspects of the political economy of European integration. The first concerns the role of public opinion in the integration process; more precisely, how economic benefits and costs of integration shape citizens' support for European Union (EU) membership. The second is the allocation of policy competences among different levels of government: European, national and regional. Chapter 1 introduces the topics developed in this thesis by reviewing the main recent theoretical developments in the political economy analysis of integration processes. It is structured as follows. First, it briefly surveys a few relevant articles on economic theories of integration and disintegration processes (Alesina and Spolaore 1997, Bolton and Roland 1997, Alesina et al. 2000, Casella and Feinstein 2002) and discusses their relevance for the study of the impact of economic benefits and costs on public opinion attitude towards the EU. Subsequently, it explores the links existing between such political economy literature and theories of fiscal federalism, especially with regard to normative considerations concerning the optimal allocation of competences in a union. Chapter 2 firstly proposes a model of citizens’ support for membership of international unions, with explicit reference to the EU; subsequently it tests the model on a panel of EU countries. What are the factors that influence public opinion support for the European Union (EU)? In international relations theory, the idea that citizens' support for the EU depends on material benefits deriving from integration, i.e. whether European integration makes individuals economically better off (utilitarian support), has been common since the 1970s, but has never been the subject of a formal treatment (Hix 2005). A small number of studies in the 1990s have investigated econometrically the link between national economic performance and mass support for European integration (Eichenberg and Dalton 1993; Anderson and Kalthenthaler 1996), but only making informal assumptions. The main aim of Chapter 2 is thus to propose and test our model with a view to providing a more complete and theoretically grounded picture of public support for the EU. Following theories of utilitarian support, we assume that citizens are in favour of membership if they receive economic benefits from it. To develop this idea, we propose a simple political economic model drawing on the recent economic literature on integration and disintegration processes. The basic element is the existence of a trade-off between the benefits of centralisation and the costs of harmonising policies in presence of heterogeneous preferences among countries. The approach we follow is that of the recent literature on the political economy of international unions and the unification or break-up of nations (Bolton and Roland 1997, Alesina and Wacziarg 1999, Alesina et al. 2001, 2005a, to mention only the relevant). The general perspective is that unification provides returns to scale in the provision of public goods, but reduces each member state’s ability to determine its most favoured bundle of public goods. In the simple model presented in Chapter 2, support for membership of the union is increasing in the union’s average income and in the loss of efficiency stemming from being outside the union, and decreasing in a country’s average income, while increasing heterogeneity of preferences among countries points to a reduced scope of the union. Afterwards we empirically test the model with data on the EU; more precisely, we perform an econometric analysis employing a panel of member countries over time. The second part of Chapter 2 thus tries to answer the following question: does public opinion support for the EU really depend on economic factors? The findings are broadly consistent with our theoretical expectations: the conditions of the national economy, differences in income among member states and heterogeneity of preferences shape citizens’ attitude towards their country’s membership of the EU. Consequently, this analysis offers some interesting policy implications for the present debate about ratification of the European Constitution and, more generally, about how the EU could act in order to gain more support from the European public. Citizens in many member states are called to express their opinion in national referenda, which may well end up in rejection of the Constitution, as recently happened in France and the Netherlands, triggering a European-wide political crisis. These events show that nowadays understanding public attitude towards the EU is not only of academic interest, but has a strong relevance for policy-making too. Chapter 3 empirically investigates the link between European integration and regional autonomy in Italy. Over the last few decades, the double tendency towards supranationalism and regional autonomy, which has characterised some European States, has taken a very interesting form in this country, because Italy, besides being one of the founding members of the EU, also implemented a process of decentralisation during the 1970s, further strengthened by a constitutional reform in 2001. Moreover, the issue of the allocation of competences among the EU, the Member States and the regions is now especially topical. The process leading to the drafting of European Constitution (even if then it has not come into force) has attracted much attention from a constitutional political economy perspective both on a normative and positive point of view (Breuss and Eller 2004, Mueller 2005). The Italian parliament has recently passed a new thorough constitutional reform, still to be approved by citizens in a referendum, which includes, among other things, the so called “devolution”, i.e. granting the regions exclusive competence in public health care, education and local police. Following and extending the methodology proposed in a recent influential article by Alesina et al. (2005b), which only concentrated on the EU activity (treaties, legislation, and European Court of Justice’s rulings), we develop a set of quantitative indicators measuring the intensity of the legislative activity of the Italian State, the EU and the Italian regions from 1973 to 2005 in a large number of policy categories. By doing so, we seek to answer the following broad questions. Are European and regional legislations substitutes for state laws? To what extent are the competences attributed by the European treaties or the Italian Constitution actually exerted in the various policy areas? Is their exertion consistent with the normative recommendations from the economic literature about their optimum allocation among different levels of government? The main results show that, first, there seems to be a certain substitutability between EU and national legislations (even if not a very strong one), but not between regional and national ones. Second, the EU concentrates its legislative activity mainly in international trade and agriculture, whilst social policy is where the regions and the State (which is also the main actor in foreign policy) are more active. Third, at least two levels of government (in some cases all of them) are significantly involved in the legislative activity in many sectors, even where the rationale for that is, at best, very questionable, indicating that they actually share a larger number of policy tasks than that suggested by the economic theory. It appears therefore that an excessive number of competences are actually shared among different levels of government. From an economic perspective, it may well be recommended that some competences be shared, but only when the balance between scale or spillover effects and heterogeneity of preferences suggests so. When, on the contrary, too many levels of government are involved in a certain policy area, the distinction between their different responsibilities easily becomes unnecessarily blurred. This may not only leads to a slower and inefficient policy-making process, but also risks to make it too complicate to understand for citizens, who, on the contrary, should be able to know who is really responsible for a certain policy when they vote in national,local or European elections or in referenda on national or European constitutional issues.