Effects of testosterone propionate on growth, survival and sex-ratio of African catfish (Clarias gariepinus Burchell)

For studying the effects of different levels of testosterone propionate on growth, survival and sex-ratio, five different doses such as 125, 100, 75, 50, 25 mg hormone per kg feed were administered to 5-day old Clarias gariepinus fry through diet for a period of 40 days. The growth performance in terms of weight and length gain of the fry receiving 100 and 75 mg hormone per kg feed were significantly higher than those receiving 50, 25 and 0 (untreated control) mg hormone per kg feed. The groups of fry treated with higher doses of hormone showed lower survival compared to those with lower doses of hormone. The frequency of male fish in the entire hormone treated groups except the 125mg/kg group, was significantly higher than that of the expected frequency of male fish in a normal population. The highest frequency of male fish, 92.08%, was obtained with the diet containing 50 mg hormone/kg diet however, the highest levels of hormone (125mg/kg diet) resulted in relatively lower frequency of male fish.

Studies on the optimum protein to energy ratio of African catfish (Clarias batrachus Burchell)

A laboratory trial was conducted to determine the optimum dietary protein to energy (P/E) ratio of African catfish, Clarias gariepinus. The experiment was carried out in a flow-through system for 6 weeks. There were 12 treatments each with two replicates having 10 fish each with a mean initial weight of 1.80 ± 0.02g. Twelve semi-purified diets were formulated with four digestible crude protein levels (23, 26.5, 30 and 33.5%) and three digestible energy levels (2.25, 2.75 and 3.25 Kcal/g). The fish were fed three times daily at satiation level. The results of the study showed that, diet containing 33.5% digestible protein and 2.75 kcal/g digestible energy with a protein to energy ratio of 121 .8 (mg protein/kcal) appeared to be best utilized for growth.

Fecundity and sex-ratio of Thai silver barb Barbodes gonionotus (Bleeker)

The fecundity and sex- ratio of Borbodes gonionotus were studied. The fecundity of 99 gravid females varied from 18001 (total length 197 mm and body weight 72 g) to 42034 (total length 187 mm and body weight 159 g). The mean fecundity was 24959.23 ± 6961.48 (for mean total length 210.50 ± 17.26 mm, mean body weight 118.16 ± 37.34g, mean ovary length 70.21 ± 27.30 mm, mean ovary weight 13.66 ± 7.12 g and mean ovary breadth 15.4 ± 2.79 mm). The relationship between fecundity (F) and other parameters such as total length, total body weight, ovary length, ovary weight and ovary breadth were studied. The fish was highly fecund and the number of eggs produced was more or less directly proportional to other different lengths.

Nutrient digestibility coefficients of diets with varying energy to protein ratio for Japanese flounder, Paralichthys olivaceus

A laboratory trial was conducted in a sea water recirculatory system to study the nutrient digestibility coefficients of diets with varying energy to protein ratios in Japanese flounder Paralicthys olivaceus. Six different experimental diets with two protein levels (45 and 55%) having six different energy to protein ratio of 87, 90, 94, 107, 110 and 114 were formulated using white fish meal and casein as protein sources. The results of the study showed that the apparent protein digestibility (APD) value ranged between 90.59 to 91.61% and there were no significant differences (P>0.05) between the APD values of diets 1, 2, 3, 4 and 6. The apparent lipid digestibility (ALD) values of diets ranged between 88.24 to 90.18%. The apparent energy digestibility (AED) values ranged between 80.55 to 87.52% with diet 3 producing significantly the highest AED value. In general, except in diet 1 the ALD and AED values increased with the increase of dietary lipid at both protein levels. The results of the present investigation indicated that Japanese flounder can efficiently digest the dietary nutrients at varying energy to protein ratios.

Bayesian two-sample tests

In this paper, we present two classes of Bayesian approaches to the two-sample problem. Our first class of methods extends the Bayesian t-test to include all parametric models in the exponential family and their conjugate priors. Our second class of methods uses Dirichlet process mixtures (DPM) of such conjugate-exponential distributions as flexible nonparametric priors over the unknown distributions.

Studies on fecundity, sex ratio and crossbreeding in different strains of Guppy

Studies on the fecundity, sex ratio and crossbreeding in different strains of the guppy Poecilia reticulata such as Butterfly I, Butterfly II and Cobra strains was carried out. The highest fecundity among Butterfly I strain was at the 5th breed while it was highest at the 6th and 8th breed among Butterfly II and Cobra strain respectively. The average male percentage was 39.88%, 43.39% and 45.02% among Butterfly I, Butterfly II and Cobra strains respectively. The crossbreeding of strains showed good results among crossbreeds of Butterfly II (♀) X Cobra (♂) and Butterfly I (♀) X Cobra (♂). The crossbreed among the Butterfly I (♀) X Cobra (♂) proved to be excellent from the point of view of more percentage, rapid growth, and brilliant body and finnage colouration.

SOME MEASUREMENTS OF THE PERMEABILITY OF KAOLIN.

This paper reports an experimental investigation of the vertical and horizontal permeabilities of speswhite kaolin clay. The permeabilities were measured using falling head permeability tests. A modification to a conventional oedometer was devised so that either vertical or horizontal permeabilities could be determined. It was found that the vertical and horizontal permeabilities of the clay slurry were similar, but that as the clay was consolidated one dimensionally the anisotropy of the clay fabric resulted in a greater horizontal permeability than the vertical permeability at any void ratio. Both permeabilities were uniquely related to the void ratio.

Experimental and theoretical comparison between static and dynamic torsional soil tests

The dynamic properties of dry Leighton Buzzard sand have been investigated using a resonant column test apparatus. These data are compared with very low frequency cyclic tests on identical specimens of sand. The comparison indicates that the properties of dry sand are independent of frequency. A simple one-dimensional model of kinematic hardening plasticity is used to predict the dynamic behaviour of the sand. The input parameters for this model are based on the results of static tests. These may be conducted on standard laboratory equipment with only minor modifications. The predictions are in good agreement with the measured data.

Rolling of thin strip and foil: Application of a tribological model for "mixed" lubrication

A mechanical model of cold rolling of foil is coupled with a sophisticated tribological model. The tribological model treats the "mixed" lubrication regime of practical interest, in which there is "real" contact between the roll and strip as well as pressurized oil between the surfaces. The variation of oil film thickness and contact ratio in the bite is found by considering flattening of asperities on the foil and the build-up of hydrodynamic pressure through the bite. The boundary friction coefficient for the contact areas is taken from strip drawing tests under similar tribological conditions. Theoretical results confirm that roll load and forward slip decrease with increasing rolling speed due to the decrease in contact ratio and friction. The predictions of the model are verified using mill trials under industrial conditions. For both thin strip and foil, the load predicted by the model has reasonable agreement with the measurements. For rolling of foil, forward slip is overestimated. This is greatly improved if a variation of friction through the bite is considered.

The effect of an upstream turbine on a low-aspect ratio vane

The interaction between a high-pressure rotor and a downstream vane is dominated by vortex-blade interaction. Each rotor blade passing period two co-rotating vortex pairs, the tip-leakage and upper passage vortex and the lower passage and trailing shed vortex, impinge on, and are cut by, the vane leading edge. In addition to the streamwise vortex the tip-leakage flow also contains a large velocity deficit. This causes the interaction of the tip-leakage flow with a downstream vane to differ from typical vortex blade interaction. This paper investigates the effect these interaction mechanisms have on a downstream vane. The test geometry considered was a low aspect ratio second stage vane located within a S-shaped diffuser with large radius change mounted downstream of a shroudless high-pressure turbine stage. Experimental measurements were conducted at engine-representative Mach and Reynolds numbers, and data was acquired using a fast-response aerodynamic probe upstream and downstream of the vane. Time-resolved numerical simulations were undertaken with and without a rotor tip gap in order to investigate the relative magnitude of the interaction mechanisms. The presence of the upstream stage is shown to significantly change the structure of the secondary flow in the vane and to cause a small drop in its performance.

Centrifuge tests investigating inclined grout micro-piles as a method of liquefaction remediation for existing buildings

This paper presents a series of centrifuge tests carried out to investigate the performance of non-structural inclined micro-piles as a potential liquefaction remediation method for existing buildings. Both a single-degree-of-freedom frame structure and a two-storey, two-degree-of-freedom frame structure were used as model buildings in these tests. Centrifuge tests were carried out with and without micro-piles in the foundation soil for each structure. Results primarily from the tests with the SDOF structure are presented in this paper. It is found that the micro-piles have some beneficial effect by increasing shear strains in the soil in their vicinity and hence causing dilation in these zones. However, they also increase structural accelerations by transmitting accelerations from deep in the soil and the beneficial effects from increased dilation are outweighed by the detrimental migration of pore pressures.

Variance prediction in sea

A method is presented for predicting the variance of the energy levels in a built-up system to accompany the mean values predicted by SEA. Closed form expressions for the variance are obtained in terms of the standard SEA parameters and an additional set of parameters αk that describe the nature of the power input to each subsystem k, and αks that describe the nature of the coupling between subsystems k and s.