Variação espaço-temporal de atributos ecológicos da ictiofauna de um grande reservatório Neotropical

Pós-graduação em Aquicultura - FCAV

Variação e gênero textual: o uso das preposições nas cartas de leitoras brasileiras e portuguesas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desempenho de escolares com e sem transtorno de aprendizagem em leitura, escrita, consciência fonológica, velocidade de processamento e memória de trabalho fonológica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Differential environmental impacts on small and medium size rivers from center of São Paulo State, Brazil, and regional management perspectives

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise dos processos de infiltração, percolação, retenção e evaporação em solos arenoso e residuais utilizando lisímetro

The mobility of water in the soil is a difficult process to be quantified. During precipitation, there is a portion of the water that infiltrates, which is very important for recovering the groundwater balance. This work studies the mobility of water in sandy soils with different textures and residual soils through experiments mounted in lysimeters. The lysimeters were mounted on acrylic cylinder with 11.3 cm diameter and 25.0 cm in length. The sand was deposited using the process sand rain. In the tests it was maintained a hydraulic head of two centimeters above the surface with the aid of a Mariotte flask. The portions of water were controlled in the experiments using relations between weight and volume measurements over time. The data were obtained by monitoring the input and output volumes of water through calibrated reservoir and system weight by an electronic balance. The infiltration front was monitored with the aid of a digital camera. The results indicate that the smaller the particle size of the sand, the lower the speed of the saturation front, the higher the retained volume, the smaller the basic rate of infiltration and the lowest speed of percolation. Moreover, the rate of water loss in the evaporation process indicated no significant difference with variation of the particle size of the samples

Variação linguística e ensino

This monograph analyzes, based on the collected data, some aspects of the teaching of the linguistic variation in schools: if the linguistic studies have been incorporated in teaching in some way in order to promote a less conservative and prejudiced perception of language, providing students the opportunity to recognize the different language varieties and judge the situations in which each of them is the most appropriate one

Análise da variação da vazão e da concentração do metano presentes nos gases gerados no aterro sanitário de Rio Claro - SP

The study of the generation of landfill gas contributes to the understanding of the relationship between gas production and other parameters, such as time of disposal of waste and moisture (rainfall) and, thus, can subsidize the viability study for energy. This study aims to evaluate the interference of the time of disposal of waste and moisture (rainfall) in the production and composition of biogas generated at the landfill in Rio Claro - SP. As a result it was observed that for the landfill studied, the average percentage of methane in biogas ranged from 49.9% to 54.7%. It was found that moisture (rainfall) and the time of waste disposal are parameters which do not cause significant changes in methane concentration in biogas. However, when analyzed the flow of biogas, which had the maximum average value of 152.86m3/h and minimum average value of 15.47m3/h was observed great interference of moisture (rainfall) and the time of disposal of waste, because well of gas located in newer areas of the landfill showed higher values of flow rate than the areas where the landfill was the beginning of the arrangement. The same way, it was observed that in the dry season flow of biogas decreased in all drains gas analyzed

Variação fenotípica nas espécies de Rhinella do grupo crucifer (Anura: bufonidae) na Mata Atlântica do Brasil

A Mata Atlântica Brasileira apresenta ampla distribuição e diferenças regionais na composição de suas paisagens, favorecendo alta diversidade e endemismo. O grupo de espécies de Rhinella crucifer é endêmico a este bioma, e distribui-se através de todo seu domínio. O grupo é composto por cinco morfoespécies, definidas com o auxilio da morfometria tradicional. Recentemente foi encontrado que apenas três destas morfoespécies correspondem a linhagens genéticas exclusivas. Neste trabalho é proposta uma releitura da variação fenotípica das espécies de Rhinella do grupo crucifer com base na morfometria geométrica, uma técnica moderna capaz de detectar padrões de variação mais refinados. Tanto em análise realizada com peso igual para variações de forma globais e locais, quanto em análise que valoriza apenas variações localizadas houve a formação de dois grupos; um contendo morfoespécie Rhinella henseli e outro formado pelo restante das morfoespécies. A alta sobreposição encontrada neste segundo grupo evidencia grande semelhança na forma craniana, sendo R henseli a morfoespécie mais diferente do grupo. Este resultado é condizente com os achados genéticos recentes, podendo- se concluir que a variação fenotípica no grupo é acompanhada pela a variação genética. Um estudo futuro com amostragem mais representativa e aprimoramento na metodologia poderá contribuir para uma melhor compreensão da diversificação morfológica nesse grupo de espécies em escala mais fina.

Interferência do método de previsão populacional no desempenho hidráulico de uma rede coletora de esgoto sanitário

The non existence of sewage services creates an unhealthy environmental, causing impact extremely prejudicial to the human health. In Brazil, this item represents the biggest deficit in the basic sanitation these days, and only about 50% of the population is attended. The sewage collection network is a needful system for the basic sanitation. Between the parameters of the project of a system of collection and sewage transportation, the definition of the population that will be attended is one of the most important variables, and that should be done based on criterion of population growth and in accordant to directrix presents in the comprehensive city plan. In this paper, were evaluated methods of growth based on the geometric growth rate, on the population density and on the number of residents per dwelling, and also mathematics models of growth prediction, emphasizing in the geometric growth and on the logistic curve method. That way, the goal of this paper were value the hydraulic performance in one of the watersheds delimited by the sewage network magnification work existent in the city of Cacoal–RO. Using simulation with different scenarios, the results pointed that the hydraulic performance of the system were strongly affected by the population determination method used. For the same drained area the diameters range from 150 to 250 mm as well as the trench’s deep, where some stretches exceeded the maximum values contained in the standard. Besides, the variation of the sewage contribution rate due the population variation estimated in different scenarios, led to alterations in others important project parameters, such as slope, shallow pool, tensile stress and spreading velocity

Estudo da variação da porcentagem e da estimativa de geração de gás metano para o aterro sanitário do município de Rio Claro - SP

Increased demand for energy and the search for alternative energy sources are remarkable and current facts. The management of domestic solid waste is also part of the issue in view of the possibility of power generation in existing landfills, which could provide financial autonomy to the system of waste management and improve the environmental balance of landfills in Brazil, currently only used for final solids disposal. Landfill gas is a viable alternative energy source has been tested in landfills in the World and in Brazil. Thus, the research aimed to evaluate the percentage of methane (CH4) present in three sinks of gases from a landfill in the municipality of Rio Claro – SP (Brazil), and to estimate the potential methane generation over its life through the application of a mathematical model. As a result it was found that in general the percentage of methane present in the gases is significant, between 50 and 62%. It was also noted that waste with disposal time between 8 and 12 months already are in the methanogenic stage. Finally, there was a tendency to increase the generation of methane in the transition periods of rain and drought

Efeito da prática do futebol no desempenho em agilidade, velocidade e coordenação de meninos na categoria dentinho ou sub 11 (10 e 11 anos de idade)

In Brazil, the practice of Soccer is encouraged very early. It is common remark that parents enroll their sons into soccer schools, promoting the involvement of these children in formal practice. However, there are not many studies that assess the effects of this practice in the physical capacities of children. Thus, the question that guides this study is: children who practice soccer systematically present better development of physical, especially agility, coordination and speed? The objective of this study was to compare the performance in velocity tests, agility and coordination of boys of 10 and 11 years, category dentinho or Sub-11, practitioners of soccer in schools and non practicing. The study included male children, born in 1997 and 1998, formed two groups: group of practitioners of soccer and group of non practicing. To belong to the group of practitioners, the child was regularly engaged for at least 1 year, with 1 hour daily and 2 to 3 times per week. The participants of the group of non practicing were not involved in regular practice of soccer and were paired in weight and stature with participants of the group of practitioners of soccer. Each participant was individually assessed in neutral environment and without foreign interference. For the assessment of the agility, was utilized the (shuttle run) test. The race test 30 meters stopped was employed for the assessment of the speed. The test of fiddling between the cones was employed to measure the coordination. The time spent to perform 1 attempt to each test was used for the comparison between groups. These data were treated, initially, by descriptive statistics (mean and standard deviation) and, subsequently, were compared by means of Anova, for independent samples. The significance level was maintained at 5%. Through analysis of the results the conclusion is that the regular practice ...(Complete abstract click electronic access below)

Projeto de conjunto redutor de velocidade utilizando engrenagem sem-fim

This work is initially based in give a solution to a problem consisting of lifting a load in a warehouse focusing specifically on the solution´s project and comparison of the results obtained following the sequence of the book and comparing these results with the finite elements simulation based on the 3D components modeling. Starting from that was realized the project of the worm gear reducer to solve the problem and makes the work easier. The project consisted basically of the study, project itself and simulation by software of a worm gear reducer and projects steps, starting with the initial problem conditions (to lifting a load up to an specific height at a given time) following all the reducer project sequence, starting by the preliminary draft and electric motor selection using iterative process, material selection, worm gear dimensioning, axles, keyways, bearings and coupling. After that was performed the three dimensional modeling of the components using SolidWorks software and simulating these components using Ansys software. The results show the importance of the CAD in terms of improving project development speed and reducing costs with prototypes

Quantificação da desintegração de comprimidos por fluxo ótico em seqüências de imagens de biosusceptometria AC

AC Biosusceptometry (ACB) is a low-cost biomagnetic tool that has been successfully applied on pharmaceutical research to evaluate performance of solid dosage forms. The aim of this work was to evaluate the Horn & Shunck method to access tablet disintegration. To evaluate the HS results was record on video a test with a objet moving in a rail with a constant velocity. The desintegration was recorded on video and ACB, which used have seven pairs of detection coils and a pair of excitation coils to mensure the magnetic ux variation. The signals were ampli ed and digitalized to create images, which were restored by Wiener lter, while the video images are converted to gray scale, both are normalized and binarized and had the optical ow estimation calculated by Horn & Schunck (HS) algorithm. All signals and images are processed and developed algorithm on Matlab. During the tests the ve tablets (500mg ferrite, 375mg excipients, compression 10 to 50 kN) were on a becker between of the ACB system and of the video system, and only touching the surface of the water. With all OF maps calculated was realized the sum of the resultants of each, to get a disintegration process resultant for each compression. Whit that was possible observed the disintegration behaves. For the compression force study the HS components of each sequence was sum, take mean and normalized for sequence's max modulo, therefore can be observed a high growing on less compression tablets. We can conclude the HS algorithm is viable to tablets disintegration data collection and whit that was possible to create a tablets disintegration analyzes protocol, which would be useful on desintegration kinetics study

Controle de velocidade de um motor de indução trifásico usando técnicas de ajuste empírico para bancada de teste no laboratório de automação

This work aims to make the closed loop control of a three phase induction motor, through the integration of the following equipment: a frequency inverter, the actuator system; a programmable logic controller (PLC), the controller; an encoder, the velocity sensor, used as a feedback monitoring the control variable and the three-phase induction motor, the plant to be controlled. The control is performed using a Proportional - Integrative - Derivative (PID) approach. The PLC has a help instruction, which performs the auto adjustment of the controller, that instruction is used and confronted with other adjustment methods. There are several types of methods adjustments to the PID controllers, where the empirical methods are addressed in this work. The system is deployed at the Interface and Electro Electronic Control laboratory in the Universidade Estadual Paulista Júlio Mesquita Filho, Guaratinguetá, São Paulo, then, in the future, this work becomes an experiment to be conducted in the classroom, allowing undergraduate students to develop a greater affinity to the programs used by the PLC as well as studies of undergraduate and graduate works with the help of assembly made

Tratamento de águas oleosas oriundas do processo de produção de óleo de dendê utilizando a flotação por ar dissolvido

This study was developed to evaluate the performance of different coagulant and pH dosages by applying the use of Dissolved Air Flotation (FAD) to enable its use in effluent treatment of the extraction process of palm oil. The study was developed in the laboratory, where studies about emulsions stability were made for the production of a synthetic effluent which best suit the characteristics of raw effluent. The synthetic water that would be used in the tests of FAD was produced, once the stability and characterization which best approached the raw wastewater was obtained. Trials tested three coagulant doses, combined with various pH ranges and five upward velocities (Va), finding an optimal range of this combination. Some operating parameters such as time and gradient of rapid mixing (20 s / 1000 s-1), time and gradient flotation (15 min / 60 s-1), chamber pressure saturation (450 kPa) and recirculation rate (20%) were set. In this way, samples were collected for analysis of the removal of turbidity parameters, suspended solids and oils and greases. This one is obtained by a correlation turbidity x oils and greases, referring to the previous analysis. The degree of removal obtained were 73,97% for turbidity, 51,4% for total suspended solids and 86,2% for oils and greases. Removal rates may be increased in later studies, by ranging the velocity gradient and flocculation parameters and the recirculation ratio, and by using lower flotation speeds to these effluent characteristics.