Assessing caries status according to the CAST instrument and WHO criterion in epidemiological studies

ABSTRACT: Background: The Caries Assessment Spectrum and Treatment (CAST) is a new epidemiological instrument for detection and treatment of dental caries. Worldwide, the WHO criterion constitutes the epidemiological tool most commonly used for caries detection. The objective of the present study is to determine the levels of similarity and difference between the CAST instrument and WHO criterion on the basis of caries prevalence, dmf/DMF counts, examination time and reporting of results. Methods: An epidemiological survey was carried out in Brazil among 6-11-year-old schoolchildren. Time of examinations was recorded. dmft, dmfs, DMFT and DMFS counts and dental caries prevalence were obtained according to the WHO criterion and the CAST instrument, as well the correlation coefficient between the two instruments. Results: Four hundred nineteen children were examined. dmft and dmfs counts were 1.92 and 5.31 (CAST), 1.99 and 5.34 (WHO) with correlation coefficients (r) of 0.95 and 0.93, respectively. DMFT and DMFS counts were 0.20 and 0.33 (CAST), 0.19 and 0.30 (WHO), with r = 0.78 and r=0.72, respectively. Kappa coefficient values for intra-examiner consistency were CAST = 0.91-0.92; WHO = 0.95-0.96 and those for inter-examiner consistency were CAST = 0.90-0.96; WHO = 0.94-1.00. Mean time spent on applying CAST and WHO were 66.3 and 64.7 sec, respectively p = 0.26. The prevalence of dental caries using CAST (codes 2, 5-8) and the WHO criterion for the primary dentition were 63.0% and 65.9%, respectively, and for the permanent dentition they were 12.7% and 12.8%, respectively. Conclusions: The CAST instrument provided similar prevalence of dental caries values and dmf/DMF counts as the WHO criterion in this age group. Time spent on examining children was identical for both caries assessment methods. Presentation of results from use of the CAST instrument, in comparison to WHO criterion, allowed a more detailed reporting of stages of dental caries, which will be useful for oral health planners.

A Repartição de Operações do Quartel-General e o desempenho operacional do Corpo Expedicionário Português

A Repartição de Operações do Estado-Maior do Corpo Expedicionário Português foi responsável pela coordenação das tropas portuguesas na frente ocidental e pela integração da força no dispositivo britânico. Elaborou o plano de defesa do setor atribuído e emitiu uma série de ordens para gerir as operações correntes. Com este trabalho pretendeu-se compreender a atividade desta repartição e o respetivo impacto no desempenho operacional do Corpo. Foram identificados os fatores que marcaram a beligerância portuguesa, que mais influência tiveram na repartição e no desempenho do Corpo, avaliado o impacto da estrutura da força e do seu Estado-Maior, identificados os fatores mais relevantes do setor atribuído e do seu dispositivo com impacto no desempenho e ainda determinado o papel da repartição durante a condução das operações. Com o intuito de atingir os objetivos propostos, foi analisado um conjunto de fontes, fundamentalmente do Arquivo Histórico Militar e da Biblioteca do Exército, para recolha de informação, e bibliografia nacional e estrangeira acerca do tema. Concluímos que a repartição contribuiu para o normal desempenho do CEP, não tendo sido identificados erros cometidos pela mesma com impacto negativo na prestação da força. Abstract: The Operations Division of the General Staff of the Portuguese Expeditionary Corps was responsible for coordinating the Portuguese troops on the western front and for the integration of the force in British defense system. It prepared the defense plan for the assigned sector, and issued several orders to manage current operations. This work was intended to understand the activity of this division and its impact on the operational performance of CEP. Were identified the factors that marked the Portuguese belligerence which more influence had in the Operations Division and CEP's performance, assessed the impact of the force structure and its staff, identified the most important factors of the assigned sector and its force structure with impact on performance and also determined the role of the operations division during the operations. In order to achieve the proposed goals, we studied a number of sources, mainly from the Military Historical Archives and the Library of the Army for information collection, and also from national and foreign literature on the subject. We conclude that the operations division contributed to the normal performance of the CEP, and didn’t identify errors committed by it with negative impact on the force performance.

Water stress thresholds for regulated deficit irrigation in pistachio trees

The response of "Kerman" pistachio trees budded on three different rootstocks (Pistacia terebinthus, Pista-cia atlantica and Pistacia integerrima) to regulated deficit irrigation (RDI) in shallow soils was studied for3 years. The trees were either fully irrigated (C treatment) or subjected to deficit irrigation during Stage IIof fruit growth with two water stress thresholds (T1 and T2). The irrigation scheduling for fully-irrigatedtrees and water-stressed trees was managed by means of midday stem water potential (?stem) measure-ments. The use of direct measurements of the water status allowed estimating accurately the irrigationrequirements for pistachio trees, with water reductions ranging from 46 to 205 mm in fully-irrigatedtrees. The combination of the ?stemuse and the RDI regime saved 43?70% in T1 and 48?73% in T2 ofwater compared to the calculated crop evapotranspiration (ETc) for fully irrigated treatment (C).Deficit irrigation during Stage II significantly reduced the vegetative growth of the trees. Yield and fruitquality were not affected by any irrigation regime, except during the first year of the study. Thus, theresults indicate that full irrigation scheduling and RDI can be achieved successfully using ?stemtool onpistachio trees growing in shallow soils. A ?stemthreshold of ?1.5 MPa during stage II (T1) was suggestedfor RDI scheduling, as it did not reduce the yield or the production value. However a ?stemthresholdof ?2.0 MPa (T2) resulted in a significant reduction and an extensive delay in the recovery of stomatalconductance (gl),with negative effects on long-term pistachio production.P. integerrima showed a weaker capacity of adaptation to the study conditions compared to P. atlanticaand P. terebinthus, having a tendency to get more stressed and to produce a lower quality crop.

Estilos pessoais dos terapeutas e estilos de vinculação

Neste estudo, procurou-se estudar a relação entre estilos pessoais e estilos de vinculação na relação terapêutica, procurando também, identificar outros aspetos que influenciam quer os estilos pessoais quer os estilos de vinculação duma amostra de psicoterapeutas. Esta amostra foi constituída por 40 licenciados em Psicologia Clínica, de ambos os sexos, com diferentes anos de experiência profissional. Os instrumentos utilizados foram o Questionário do Estilo pessoal (EPT) e a Escala de Vinculação de Adultos (EVA). Os resultados apontaram para uma associação entre a função instrutiva do EPT e o estilo de vinculação (terapeutas rígidos apresentam um estilo de vinculação ambivalente, enquanto que os terapeutas flexíveis apresentam um estilo de vinculação seguro), e entre algumas das funções do EPT com a orientação teórica, o grupo etário dos clientes e o género dos terapeutas. Conclui-se que a forma como os terapeutas estabelecem e regulam as suas sessões, está associada ao estilo de vinculação. ABSTRACT: ln this study, the priority goal was to identify which type of relationship exist between personnel styles and attachment styles in the therapeutic relationship; still point a characterization and a recognition of what aspects that can influence it, and then analyse it. The sample were constituted by 40 psychotherapists, they have a licenciature degree in clinical psychology, and the years of professional experience or the duration that they have the degree don't matter. The questionnaire EPT-C and the Adult attachment Scale-R (AAS-R). The results point to the association between the instructive function and attachment styles, as to the EPT-C functions with theoric orientation, age groups of clients, and therapists genres. The therapists that are rigids show a ambivalent style; but therapists flexible shows a secure style of attachment. lndeed the way as therapists stablish and regulate their sessions, is associated to the attachment style.

Novel Mutation in the ATP-Binding Cassette Transporter A3 (ABCA3) Encoding Gene Causes Respiratory Distress Syndrome in A Term Newborn in Southwest Iran

Introduction: ABCA3 glycoprotein belongs to the ATP-binding cassette (ABC) superfamily of transporters, which utilize the energy derived from hydrolysis of ATP for the translocation of a wide variety of substrates across the plasma membrane. Mutations in the ABCA3 gene are knowingly causative for fatal surfactant deficiency, particularly respiratory distress syndrome (RDS) in term babies. Case Presentation: In this study, Sanger sequencing of the whole ABCA3 gene (NCBI NM_001089) was performed in a neonatal boy with severe RDS. A homozygous mutation has been identified in the patient. Parents were heterozygous for the same missense mutation GGA > AGA at position 202 in exon 6 of the ABCA3 gene (c.604G > A; p.G202R). Furthermore, 70 normal individuals have been analyzed for the mentioned change with negative results. Conclusions: Regarding Human Genome Mutation Database (HGMD) and other literature recherche, the detected change is a novel mutation and has not been reported before. Bioinformatics mutation predicting tools prefer it as pathogenic.

Effect of Allium sativum (garlic) methanol extract on viability and apoptosis of human leukemic cell lines

Purpose: To investigate the effect of Allium sativum (garlic) methanol extract on viability and apoptosis of human leukemic cells. Methods: Cell viability was determined using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay at concentrations of 3.125, 6.25, 12.5, 25, 50, 100, 200, 400 and 800 ug/mL of Allium sativum extract following 48-h treatment on U-937, Jurkat Clone E6-1 and K-562 cell lines. The mode of cell death was determined by Annexin V-FITC staining and analyzed by flow cytometry. Results: The results show that the half-maximal inhibitory concentration (IC50) of A. sativum on U-937, Jurkat Clone E6-1, K-562 cell lines was 105 ± 2.21, 489 ± 4.51 and 455 ± 3.13 μg/mL, respectively, compared with negative control, while apoptosis was 17.93 ± 0.95 % for U-937 cells (p ≤ 0.05), 38.37 ± 1.88 % for Jurkat Clone E6-1 cells (p ≤ 0.001) and 16.37 ± 1.10 % for K-562 cells. A majority of the cells were inhibited by the extract via apoptosis. Only U-937 cells (6.87 ± 0.65 %) showed significant necrosis compared to negative control (p ≤ 0.05). Conclusion: K-562 cells are the most resistant against garlic extract, in contrast to Jurkat Clone E6-1 cells. Garlic extract does not induce necrosis in Jurkat Clone E6-1 and K-562 cells.

Engineering design of an integrated sustainable process system for cassava biobased materials

Cassava contributes significantly to biobased material development. Conventional approaches for its bio-derivative-production and application cause significant wastes, tailored material development challenges, with negative environmental impact and application limitations. Transforming cassava into sustainable value-added resources requires redesigning new approaches. Harnessing unexplored material source, and downstream process innovations can mitigate challenges. The ultimate goal proposed an integrated sustainable process system for cassava biomaterial development and potential application. An improved simultaneous release recovery cyanogenesis (SRRC) methodology, incorporating intact bitter cassava, was developed and standardized. Films were formulated, characterised, their mass transport behaviour, simulating real-distribution-chain conditions quantified, and optimised for desirable properties. Integrated process design system, for sustainable waste-elimination and biomaterial development, was developed. Films and bioderivatives for desired MAP, fast-delivery nutraceutical excipients and antifungal active coating applications were demonstrated. SRRC-processed intact bitter cassava produced significantly higher yield safe bio-derivatives than peeled, guaranteeing 16% waste-elimination. Process standardization transformed entire root into higher yield and clarified colour bio-derivatives and efficient material balance at optimal global desirability. Solvent mass through temperature-humidity-stressed films induced structural changes, and influenced water vapour and oxygen permeability. Sevenunit integrated-process design led to cost-effectiveness, energy-efficient and green cassava processing and biomaterials with zero-environment footprints. Desirable optimised bio-derivatives and films demonstrated application in desirable in-package O2/CO2, mouldgrowth inhibition, faster tablet excipient nutraceutical dissolutions and releases, and thymolencapsulated smooth antifungal coatings. Novel material resources, non-root peeling, zero-waste-elimination, and desirable standardised methodology present promising process integration tools for sustainable cassava biobased system development. Emerging design outcomes have potential applications to mitigate cyanide challenges and provide bio-derivative development pathways. Process system leads to zero-waste, with potential to reshape current style one-way processes into circular designs modelled on nature's effective approaches. Indigenous cassava components as natural material reinforcements, and SRRC processing approach has initiated a process with potential wider deployment in broad product research development. This research contributes to scientific knowledge in material science and engineering process design.

Konstruktive und funktionale Entwicklung eines selbststeuernden Unterflurbewässerungsverfahrens

Unter Einfluss des gegenwärtigen Klimawandels sowie dem Anstieg der Erdbevölkerung ist der effiziente Umgang mit den vorhandenen Wasserressourcen ein zentrales Thema in der Bewässerungslandwirtschaft. Die Unterflurbewässerung ist ein seit Jahrtausenden bekanntes Verfahren, bei dem das Bewässerungswasser unterhalb der Erdoberfläche aufgebracht wird und der Pflanze direkt im Wurzelraum zur Verfügung steht. Die Gefäßbewässerung ist ein selbststeuerndes Verfahren wobei die Wassergabe aus dem unglasierten Tongefäß aufgrund der im umgebenden Boden anliegenden Saugspannung erfolgt. Diese wassersparende und dem Wasserbedarf der Pflanze angepasste Bewässerungsweise ist Grundlage der Überlegungen und Untersuchungen der vorliegenden Arbeit. Ausgehend von dem Gedanken der Kombination der Vorteile der Gefäßbewässerung mit denen moderner Materialien, die eine maschinelle Installation ermöglichen und eine lange Lebensdauer aufweisen, wurde die Entwicklung einer selbststeuernden Bewässerung verfolgt. Materialrecherchen und eine Auswahl als geeignet identifizierter Materialien führten zu Laboruntersuchungen an Hand derer die Darcy-Eigenschaften (linearer Zusammenhang zwischen Volumenstrom und anliegendem Druck) überprüft wurden. Membranen erwiesen sich danach als geeignet, so dass an einer ausgewählten Schlauchmembran weitergehende Untersuchungen zum Einsatz für die Bewässerung vorgenommen wurden. Diese umfassten Langzeitlaborversuche im Boden zur Untersuchung der Entwicklung der Durchlässigkeit der Schlauchmembran über die Zeit, sowie zum Nachweis der Selbststeuerung des Systems. Mit den gewonnenen Ergebnissen war es möglich großmaßstäbliche Versuche im Gewächshaus zu realisieren, bei der die Schlauchmembran im Vergleich zur Tropfbewässerung hinsichtlich Wasserverbrauch und Ernteertrag an Standorten in Deutschland und Algerien getestet wurde. Diese Gewächshausversuche zeigten vielversprechende Ergebnisse für die Membranschlauchbewässerung mit im Vergleich zur Tropfbewässerung erhöhten Erträgen bei gleichzeitig geringerem Wasserverbrauch. Dies wurde besonders bei Verwendung von Bewässerungswasser mit erhöhtem Salzgehalt deutlich. Sorgfältiger Beachtung bedarf die Wasserqualität, da die Membranschlauchbewässerung auf Wasserverunreinigungen mit Durchflussverminderung reagiert, die sich nachteilig auf die Pflanzenentwicklung auswirkt. Aufgabe weiterer Forschungen muss es demnach sein, technische Verfahren zu entwickeln, die die langfristige Leistungsfähigkeit der Membran im Bewässerungsbetrieb aufrechterhalten.

System innovation and life cycle thinking in packaging value chain: the circularity of plastics.

Compared to other, plastic materials have registered a strong acceleration in production and consumption during the last years. Despite the existence of waste management systems, plastic_based materials are still a pervasive presence in the environment, with negative consequences on marine ecosystem and human health. The recycling is still challenging due to the growing complexity of product design, the so-called overpackaging, the insufficient and inadequate recycling infrastructure, the weak market of recycled plastics and the high cost of waste treatment and disposal. The Circular economy package, the European Strategy for plastics in a circular economy and the recent European Green Deal include very ambitious programmes to rethink the entire plastic value chain. As regards packaging, all plastic packaging will have to be 100% recyclable (or reusable) and 55% recycled by 2030. Regions are consequently called upon to set up a robust plan able to fit the European objectives. It takes on greater importance in Emilia Romagna where the Packaging valley is located. This thesis supports the definition of a strategy aimed to establish an after-use plastics economy in the region. The PhD work has set the basis and the instruments to establish the so-called Circularity Strategy with the aim to turn about 92.000t of plastic waste into profitable secondary resources. System innovation, life cycle thinking and participative backcasting method have allowed to deeply analyse the current system, orientate the problem and explore sustainable solutions through a broad stakeholder participation. A material flow analysis, accompanied by a barrier analysis, has supported the identification of the gaps between the present situation and the 2030 scenario. Eco-design for and from recycling (and a mass _based recycling rate (based on the effective amount of plastic wastes turned into secondary plastics), valorized by a value_based indicator, are the key-points of the action plan.

Employment of Real-Time/FPGA Architectures for Test and Control of Automotive Engines

Nowadays the production of increasingly complex and electrified vehicles requires the implementation of new control and monitoring systems. This reason, together with the tendency of moving rapidly from the test bench to the vehicle, leads to a landscape that requires the development of embedded hardware and software to face the application effectively and efficiently. The development of application-based software on real-time/FPGA hardware could be a good answer for these challenges: FPGA grants parallel low-level and high-speed calculation/timing, while the Real-Time processor can handle high-level calculation layers, logging and communication functions with determinism. Thanks to the software flexibility and small dimensions, these architectures can find a perfect collocation as engine RCP (Rapid Control Prototyping) units and as smart data logger/analyser, both for test bench and on vehicle application. Efforts have been done for building a base architecture with common functionalities capable of easily hosting application-specific control code. Several case studies originating in this scenario will be shown; dedicated solutions for protype applications have been developed exploiting a real-time/FPGA architecture as ECU (Engine Control Unit) and custom RCP functionalities, such as water injection and testing hydraulic brake control.

Analysis of the main phenomena affecting solid rocket motors internal ballistics

In solid rocket motors, the absence of combustion controllability and the large amount of financial resources involved in full-scale firing tests, increase the importance of numerical simulations in order to asses stringent mission thrust requirements and evaluate the influence of thrust chamber phenomena affecting the grain combustion. Among those phenomena, grain local defects (propellant casting inclusions and debondings), combustion heat accumulation involving pressure peaks (Friedman Curl effect), and case-insulating thermal protection material ablation affect thrust prediction in terms of not negligible deviations with respect to the nominal expected trace. Most of the recent models have proposed a simplified treatment to the problem using empirical corrective functions, with the disadvantages of not fully understanding the physical dynamics and thus of not obtaining predictive results for different configurations of solid rocket motors in a boundary conditions-varied scenario. This work is aimed to introduce different mathematical approaches to model, analyze, and predict the abovementioned phenomena, presenting a detailed physical interpretation based on existing SRMs configurations. Internal ballistics predictions are obtained with an in-house simulation software, where the adoption of a dynamic three-dimensional triangular mesh together with advanced computer graphics methods, allows the previous target to be reached. Numerical procedures are explained in detail. Simulation results are carried out and discussed based on experimental data.

Learning from errors: Psychological, relational, and cultural aspects

Although errors might foster learning, they can also be perceived as something to avoid if they are associated with negative consequences (e.g., receiving a bad grade or being mocked by classmates). Such adverse perceptions may trigger negative emotions and error-avoidance attitudes, limiting the possibility to use errors for learning. These students’ reactions may be influenced by relational and cultural aspects of errors that characterise the learning environment. Accordingly, the main aim of this research was to investigate whether relational and cultural characteristics associated with errors affect psychological mechanisms triggered by making mistakes. In the theoretical part, we described the role of errors in learning using an integrated multilevel (i.e., psychological, relational, and cultural levels of analysis) approach. Then, we presented three studies that analysed how cultural and relational error-related variables affect psychological aspects. The studies adopted a specific empirical methodology (i.e., qualitative, experimental, and correlational) and investigated different samples (i.e., teachers, primary school pupils and middle school students). Findings of study one (cultural level) highlighted errors acquire different meanings that are associated with different teachers’ error-handling strategies (e.g., supporting or penalising errors). Study two (relational level) demonstrated that teachers’ supportive error-handling strategies promote students’ perceptions of being in a positive error climate. Findings of study three (relational and psychological level) showed that positive error climate foster students’ adaptive reactions towards errors and learning outcomes. Overall, our findings indicated that different variables influence students’ learning from errors process and teachers play an important role in conveying specific meanings of errors during learning activities, dealing with students’ mistakes supportively, and establishing an error-friendly classroom environment.

Spectral asymptotic properties of semi-regular non-commutative harmonic oscillators

The study carried out in this thesis is devoted to spectral analysis of systems of PDEs related also with quantum physics models. Namely, the research deals with classes of systems that contain certain quantum optics models such as Jaynes-Cummings, Rabi and their generalizations that describe light-matter interaction. First we investigate the spectral Weyl asymptotics for a class of semiregular systems, extending to the vector-valued case results of Helffer and Robert, and more recently of Doll, Gannot and Wunsch. Actually, the asymptotics by Doll, Gannot and Wunsch is more precise (that is why we call it refined) than the classical result by Helffer and Robert, but deals with a less general class of systems, since the authors make an hypothesis on the measure of the subset of the unit sphere on which the tangential derivatives of the X-Ray transform of the semiprincipal symbol vanish to infinity order. Abstract Next, we give a meromorphic continuation of the spectral zeta function for semiregular differential systems with polynomial coefficients, generalizing the results by Ichinose and Wakayama and Parmeggiani. Finally, we state and prove a quasi-clustering result for a class of systems including the aforementioned quantum optics models and we conclude the thesis by showing a Weyl law result for the Rabi model and its generalizations.

Effects of Variations in Nonlinear Damping Coefficients on the Parametric Vibration of a Cantilever Beam with a Lumped Mass

Uncertainties in damping estimates can significantly affect the dynamic response of a given flexible structure. A common practice in linear structural dynamics is to consider a linear viscous damping model as the major energy dissipation mechanism. However, it is well known that different forms of energy dissipation can affect the structure's dynamic response. The major goal of this paper is to address the effects of the turbulent frictional damping force, also known as drag force on the dynamic behavior of a typical flexible structure composed of a slender cantilever beam carrying a lumped-mass on the tip. First, the system's analytical equation is obtained and solved by employing a perturbation technique. The solution process considers variations of the drag force coefficient and its effects on the system's response. Then, experimental results are presented to demonstrate the effects of the nonlinear quadratic damping due to the turbulent frictional force on the system's dynamic response. In particular, the effects of the quadratic damping on the frequency-response and amplitude-response curves are investigated. Numerically simulated as well as experimental results indicate that variations on the drag force coefficient significantly alter the dynamics of the structure under investigation. Copyright (c) 2008 D. G. Silva and P. S. Varoto.

Calculation of Activity Coefficients of Uni-Univalent Electrolytes by Equations Containing No Adjustable Parameters in Aqueous Solutions at 298.15 K

Normally either the Güntelberg or Davies equation is used to predict activity coefficients of electrolytes in dilute solutions when no better equation is available. The validity of these equations and, additionally, of the parameter-free equations used in the Bates-Guggenheim convention and in the Pitzerformalism for activity coefficients were tested with experimentally determined activity coefficients of HCl, HBr, HI, LiCl, NaCl, KCl, RbCl, CsCl, NH4Cl, LiBr,NaBr and KBr in aqueous solutions at 298.15 K. The experimental activity coefficients of these electrolytes can be usually reproduced within experimental errorby means of a two-parameter equation of the Hückel type. The best Hückel equations were also determined for all electrolytes considered. The data used in the calculations of this study cover almost all reliable galvanic cell results available in the literature for the electrolytes considered. The results of the calculations reveal that the parameter-free activity coefficient equations can only beused for very dilute electrolyte solutions in thermodynamic studies.