Avaliação da contaminação dos condensados de uma fábrica de pasta para papel

O objectivo do presente trabalho foi caracterizar os condensados produzidos numa fábrica de pasta para papel para identificar e localizar pontos da sua contaminação. Para o efeito, foram recolhidas amostras de condensado e caracterizados os parâmetros condutividade, pH, sódio e sílica. A amostragem decorreu no período entre 15 de Setembro a 6 de Novembro de 2008. Através da análise dos resultados obtidos para as concentrações de sílica e de sódio de cada uma das correntes, foram identificadas como contaminadas as correntes de condensado provenientes do condensador do Turbogerador 4, da área dos Digestores Descontínuos, da Evaporação e do Aquecedor de Água Quente para o Branqueamento. A realização de um balanço pontual à sílica no tanque de condensados da Central permitiu concluir que a maior contribuição advém do condensador do Turbogerador 4. Na Evaporação ocorre contaminação do condensado quando as secções do Concentrador 1 são colocadas em serviço após lavagem. Durante o acompanhamento do arranque da Evaporação, uma das secções (1/B) registou um valor máximo na concentração de sódio no condensado de 135 mg/L Na. Do estudo resulta, enquanto não for reparado e/ou substituído o equipamento responsável pelas contaminações, a necessidade de admitir requisitos para controlo da qualidade da água da caldeira menos restritivos, nomeadamente para a razão sódio/fosfato. É necessário, contudo, o rigoroso acompanhamento da qualidade da água da caldeira (pH, sobretudo) para prevenir afastamentos inesperados dos limites de controlo. Durante a realização deste trabalho foram identificadas algumas situações a melhorar, tais como a uniformização dos valores de desvio para esgoto dos condensados e das unidades utilizadas, a adequação das escalas dos aparelhos de medida para as gamas de leitura de interesse, a verificação e calibração periódica do equipamento instalado em linha, a adopção do parâmetro “Sódio” para controlo da qualidade dos condensados, a instalação de sistemas de amostragem com arrefecimento em todas as correntes de condensados e a reparação ou substituição de algum equipamento instalado em linha que se encontra em muito mau estado e ainda a manutenção do equipamento mantendo-o em boas condições de limpeza.

Estudo do potencial antioxidante de vegetais em produção aquapónica

Dissertação de Mestrado, Tecnologia e Segurança Alimentar, 14 de Dezembro de 2015, Universidade dos Açores.

Optimização do tratamento por lamas activadas do efluente líquido da Mundotêxtil

A Mundotêxtil foi fundada em 1975 tendo iniciado a sua actividade na área comercial de produtos têxteis. Actualmente é o maior produtor nacional de atoalhados de felpo e emprega 575 colaboradores. Como resultado do seu crescimento e sobretudo da actividade de tingimento de fio e felpo, as necessidades de água são consideráveis e o volume de efluentes gerados nos processos industriais é cada vez maior a empresa avançou com a construção de uma estação de tratamento por lamas activadas, colocando-a em funcionamento em Setembro de 2004. Inicialmente surgiram dificuldades para a remoção da cor e da concentração da Carência Química de Oxigénio (CQO) de modo a cumprir os limites máximos de emissão permitidos nas normas de descarga no rio Ave e no Decreto-Lei nº 236/98, de 1 de Agosto. Com a descarga de parte dos efluentes no SIDVA e a utilização de um coagulante adicionado ao reactor o tratamento passou a apresentar melhores resultados. O intuito deste trabalho é o de apresentar soluções de modo a optimizar o funcionamento do tratamento biológico da Mundotêxtil. A optimização pode começar na concepção dos produtos, pode incidir no processo de fabrico para além de poder ser efectuada no seio da estação de tratamento biológico. Foi efectuado um estudo do tratamento biológico por lamas activadas no Laboratório de Tecnologia Química Profª Doutora Lída de Vasconcelos, laboratório tecnológico do Instituto Superior de Engenharia do Porto (ISEP) que decorreu nos meses de Maio, Junho e Julho de 2010. O estudo laboratorial foi efectuado para três situações distintas: 1) tratamento do efluente bruto sem qualquer tipo de pré-tratamento (ensaios 1 a 3); 2) tratamento do efluente bruto submetido a pré-tratamento com coagulante Ambifloc BIO MD (ensaios 4 e 5) e 3) tratamento com adição de fungos ao tanque de arejamento (ensaio 6). Foram utilizadas duas instalações de tratamento alimentadas a partir do mesmo tanque de alimentação. Os dois sistemas eram idênticos, diferiram nos caudais de alimentação de efluente que foram alterados ao longo do estudo. O efluente a tratar foi fornecido pela empresa Mundotêxtil, sendo recolhido por diversas vezes ao longo dos ensaios. Este efluente foi retirado após o pré-tratamento da empresa, ou seja este efluente é o mesmo que alimenta o tratamento biológico da Mundotêxtil. Devido a este facto o efluente usado no estudo laboratorial teve uma variabilidade no período em que decorreu o estudo, nomeadamente em termos de concentração de CQO e cor. A relação entre a Carência Bioquímica (CBO5) e a CQO situouse entre 0,47 e 0,63 o que traduz que está dentro dos valores típicos para um efluente têxtil. Os melhores resultados globais de remoção de CQO foram obtidos no ensaio 5 e estiveram compreendidos entre 73,2% e 77,5% para o ensaio 5.1 e entre 62,9 e 73,2% para o ensaio 5.2. Neste ensaio foi utilizado o coagulante. Todos os valores de concentração de CQO obtidos nos efluentes dos decantadores para os ensaios 2, 5 e 6 são inferiores aos valores limite de descarga definidos nas normas de descarga no rio Ave e o Decreto-Lei 236/98. Os valores de concentração de Sólidos Suspensos Totais (SST), pH, fósforo, CBO5 e cor nos decantadores cumpriram os limites de descarga definidos nas normas de descarga no rio Ave e no Decreto-Lei nº 236/98 em todos os ensaios. Os parâmetros cinéticos obtidos para os ensaios com descorante são os que melhor se ajustam ao projecto de uma instalação de tratamento biológico por lamas activadas do efluente da Mundotêxtil. Os valores obtidos, após ajuste, são os seguintes: k=0,015 L/(mgSSV*d); Sn=12 mg/L; a=0,7982 kgO2/kgCBO5; b=0,0233 [kgO2/(kgSSV*d); y=0,2253 kgSSV/kgCBO5; kd=0,0036 kgSSV/(kgSSV*d. Com base nos parâmetros cinéticos obtiveram-se os seguintes resultados para o projecto de uma estação de tratamento biológico por lamas activadas: · Tempo de retenção hidráulica no reactor de 1,79 d, · Volume do reactor igual a 3643 m3 · Consumo de oxigénio no reactor de 604 kg/d · Razão de recirculação igual a 0,8 · Volume total do decantador secundário igual a 540 m3 · Diâmetro do decantador secundário igual a 15 m A quantidade de oxigénio necessário é baixa e o valor mais adequado deverá ser da ordem de 1200 kg/d. Também foi efectuada uma análise aos produtos químicos consumidos pela empresa na área das tinturarias com a finalidade de identificar as substâncias com uma maior influência potencial no funcionamento da Estação de Tratamento Biológico. O encolante CB, Cera Têxtil P Líquida, Perfemina P-12, Meropan DPE-P, Meropan BRE-P, Indimina STS e Benzym TEC são os produtos químicos que têm uma influência potencial mais significativa na qualidade dos efluentes. Devido ao facto das temperaturas do efluente alimentado ao tratamento biológico da Mundotêxtil oscilarem entre 35 ºC e 43ºC efectuou-se um estudo às necessidades de água quente das tinturarias e por outro lado à capacidade de aquecimento dos efluentes disponíveis. Actualmente a racionalização dos consumos de água é cada vez mais premente, por isso também é apresentado neste trabalho um estudo para a substituição das máquinas convencionais das tinturarias com uma relação de banho 1:10 por máquinas de banho curto (1:6,5). Verifica-se a redução de consumos de 40% de água, 52% de energia eléctrica, 35% de produtos químicos, 51% das necessidades de vapor e por consequência um aumento da produtividade. A empresa pode reduzir os consumos de água em cerca de 280.000 m3/ano. A utilização do pré-tratamento com o coagulante permitirá baixar a concentração da CQO e reduzir a cor à entrada do reactor tratamento biológico. Deste modo é possível manter um tratamento eficiente à saída do tratamento biológico nas situações de descarga de cores carregadas e carga orgânica elevada. Com este conjunto de soluções, quer sejam aplicadas na totalidade ou não, a empresa Mundotêxtil pode enfrentar o futuro com mais confiança podendo estar preparada para fazer face à escassez de água e custos cada vez maiores da energia. Por outro lado pode tratar os seus efluentes a custos menores. A substituição das máquinas de tingimento por máquinas com relação de banho mais baixa (banho curto) implica investimentos elevados mas estes investimentos são necessários não só por motivos ambientais mas também devido à grande competitividade dos mercados.

Edentulism and shortened dental arch in Brazilian elderly from the National Survey of Oral Health 2003

OBJECTIVE: To describe the distribution of edentulism and estimate the prevalence of functional dentition and shortened dental arch among elderly population. METHODS: A population-based epidemiological study was carried out with a sample of 5,349 respondents aged 65 to 74 years obtained from the 2002 and 2003 Brazilian Ministry of Health/Division of Oral Health survey database. The following variables were studied: gender; macroregion of residence; missing teeth; percentage that met the World Health Organization goal for oral health in the age group 65 to 74 years (50% having at least 20 natural teeth); presence of shortened dental arch; number of posterior occluding pairs of teeth. The Chi-square test assessed the association between categorical variables. The Kruskal-Wallis and Mann-Whitney tests were used to assess differences of mean between number of posterior occluding pairs teeth, macro-region and gender. RESULTS: The elderly population had an average of 5.49 teeth (SD: 7.93) with a median of 0. The proportion of completely edentulous respondents was 54.7%. Complete edentulism was 18.2% in the upper arch and 1.9% in the lower arch. The World Health Organization goal was achieved in 10% of all respondents studied. However, only 2.7% had acceptable masticatory function and aesthetics (having at least shortened dental arch) and a mean number of posterior occluding pairs of 6.94 (SD=2.97). There were significant differences of the percentage of respondents that met the World Health Organization goal and presence of shortened dental arch between men and women. There were differences in shortened dental arch between macroregions. CONCLUSIONS: The Brazilian epidemiological oral health survey showed high rate of edentulism and low rate of shortened dental arch in the elderly population studied, thus suggesting significant functional and aesthetic impairment in all Brazilian macroregions especially among women.

Les Plus Anciens Mastodontes Tetralophodontes (Langhien inférieur Vb), évolution et remarques sur la Tetralophodontie

This study deals with mastodont teeth found near Lisbon in Lower Langhian (lower Middle Miocene) fluviatile, feldspathic sands (Vb division). Conclusions are as follows: 1. Tetralophodont molars (even if at a still primitive stade of the tetralophodont condition) do exist at least since lower Langhian times, and not only since late Middle Miocene as was previously known. 2. Tri- and tetralophodont structures may (and indeed do) coexist in the same individual: such examples do not correspond to transitional forms, but instead to a mosaic of juxtaposed characters (however this does not mean there are no transitional forms in other instances). 3. So these structures coexisted in a population not yet genetically separated beyond fertile cross-breeding, i.e. beyond species' level. 4. Origin of the tetralophodont molar was due to some mutation (s). but without crossing species, limits and even more genus'ones. 5. At this times probably soon after the first appearance of tetralophodont mutants, animals with such characters were a small but significant minority among the population (17% if account is taken on D4's: only 2% after M2's). 6. There was not then any direct and clear correlation between number of lophs (transversal crests) and tooth size, even if the increase of such number goes along with length's increase. 7. Dimensions (length in special) in tetralophodont teeth tend to exceed those in «normal» trilophodont teeth, this being particularly clear in D4, even if there is no clear distinction: the situation is quite the same, maybe less marked, with the M2. 8. According to the preceding conclusions there are no reasons to segregate different taxa among such mastodont population on the grounds of the presence in D4, M1 and M2 of 3 or 4 crests (this character being regarded as diagnostic of the genus Tetralophodon). 9. On the contrary, if any natural (in biological sense) classification is disregarded and a morphological parataxonomy is adopted there should be considered both Gomphotherium angustidens and Tetralophodon sp.: however this is absolutely not our opinion.

Notas sobre depósitos de Taveiro estratigrafia, paleontologia, idade, paleoecologia

This paper reports some research work that has been done to support Geological Survey's field work for the 1:50.000 Carta Geológica de Portugal, (sheets 19-C Figueira da Foz and 19-D Coimbra-Lousã). Its main purpose was to establish the age of some continental formations. At Cerâmica do Mondego, Ld.ª near Taveiro, two series were observed. The lower one is mainly pelitic, montmorillonite being predominant. It also includes some sandy beds and channel deposits with high energy sediments (conglomerate with limestone pebbles). The upper series lies unconformably upon the former, and there is a neat discontinuity surface between the two. It mainly consists of sands, kaolinite being the most abundant of the clay minerals. This seems to indicate an intensive weathering, an acid, well drained environment and transportation by quite high energy running waters. No fossils were recorded. Preliminary paleontological results are presented, along with some data concerning other localities (Aveiro, etc.). Fossils found in the lower series are: gastropoda (Bulimus gaudryi, TV. 15 bed), several vertebrates (TV. 18), fishes (TV. 19?) and plants (TV. 19-TV. 24). Vertebrata belong to the same fauna as that from Vizo, Aveiro, etc. The presence of mammals is most important as only a single tooth was previously Know in Europe (Southern France) in Late Cretaceous formations. Elsewhere there are some mammalian remains in Peru besides the rich assemblages found in the USA and Mongolia. Plants are representative of the «Debeya flora» well known at several localities in Beira Litoral province, in «Buçaco sandstones», and in Lisbon's «Basaltic Complex». The most important stratigraphical conclusion is that the lower series is Upper Campanian and/or Maastrichtian in age, and not Tertiary as sometimes it has been considered. As at Aveiro, «Bebeya flora» occurs in-beds somewhat higher than those with the Aveiro-Vizo-Taveiro vertebrate fauna. Correlation with other «Debeya flora» localities are now more clear. Data concerning Taveiro lower series, in the whole, point out to a rather warm (and moist?) environment in an occasionally (seasonally?) flooded region.

Notes sur la géologie et la paleontology du Miocène de Lisbonne; (XX) les plus anciens mastodontes tetralophodontes (Langhien inférieur Vb), évolution et remarques sur la tetralophodontie

This study deals with mastodont teeth found near Lisbon in Lower Langhian (lower Middle Miocene) fluviatile, feldspathic sands (Vb division). Conclusions are as follows: 1. Tetralophodont molars (even if at a still primitive stade of the tetralophodont condition) do exist at least since lower Langhian times, and not only since late Middle Miocene as was previously known. 2. Tri- and tetralophodont structures may (and indeed do) coexist in the same individual: such examples do not correspond to transitional forms, but instead to a mosaic of juxtaposed characters (however this does not mean there are no transitional forms in other instances). 3. So these structures coexisted in a population not yet geneticaliy separated beyond fertile cross-breeding, i.e. beyond species'level. 4. Origin of the tetralophodont molar was due to some mutation (s). but without crossing species, limits and even more genus' ones. 5. At this times probably soon after the first appearance of tetralophodont mutants, animals with such characters were a small but signifiant minority among the population (17% if account is taken on D4's: only 2% after M2's). 6. There was not then any direct and clear correlation between number of lophs (transversal crests) and tooth size, even if the increase of such number goes along with length's increase. 7. Dimensions (length in special) in tetralophodont teeth tend to exceed those in «normal» trilophodont teeth, this being particularly clear in D4, even if there is no clear distinction: the situation is quite the same, maybe less marked, with the M2. 8. According to the preceding conclusions there are no reasons to segregate different taxa among such mastodont population on the grounds of the presence in D4, M1 and M2 of 3 or 4 crests (this character being regarded as diagnostic of the genus Tetralophodon). 9. On the contrary, if any natural (in biological sense) classification is disregarded and a morphological parataxonomy is adopted there should be considered both Gomphotherium angustidens and Tetralophodon sp.: however this is absolutely not our opinion.

Notas sobre depósitos de Taveiro estratigrafia, paleontologia, idade, paleoecologia

This paper reports some research work that has been done to support Geological Survey's field work for the 1:50.000 Carta Geológica de Portugal, (sheets 19-C Figueira da Foz and 19-D Coimbra-Lousã). Its main purpose was to establish the age of some continental formations. At Cerâmica do Mondego, Lda. near Taveiro, two series were observed. The lower one is mainly pelitic, montmorillonite being predominant. It also includes some sandy beds and channel deposits with high energy sediments (conglomerate with limestone pebbles). The upper series lies unconformably upon the former, and there is a neat discontinuity surface between the two. It mainly consists of sands, kaolinite being the most abundant of the clay minerals. This seems to indicate an intensive weathering, an acid, well drained environment and transportation by quite high energy running waters. No fossils were recorded. Preliminary paleontological results are presented, along with some data concerning other localities (Aveiro, etc). Fossils found in the lower series are: gastropoda (Bulimus gaudryi, TV. 15 bed), several vertebrates (TV. 18), fishes (TV. 19?) and plants (TV. 19-TV. 24). Vertebrata belong to the same fauna as that from Vizo, Aveiro, etc. The presence of mammals is most important as only a single tooth was previously know in Europe (Southern France) in Late Cretaceous formations. Elsewhere there are some mammalian remains in Peru besides the rich assemblages found in the USA and Mongolia. Plants are representative of the «Debeya flora» well known at several localities in Beira Litoral province, in «Buçaco sandstones», and in Lisbon's «Basaltic Complex». The most important stratigraphical conclusion is that the lower series is Upper Campanian and/or Maastrichtian in age, and not Tertiary as sometimes it has been considered. As at Aveiro, «Bebeya flora» occurs in-beds somewhat higher than those with the Aveiro-Vizo-Taveiro vertebrate fauna. Correlation with other «Debeya flora» localities are now more clear. Data concerning Taveiro lower series, in the whole, point out to a rather warm (and moist?) environment in an occasionally (seasonally?) flooded region.

Paralophiodon cf. leptorhynchum (tapiroidea, mammalia) à Vale Furado: contribution à la connaissance de l’éocène au Portugal

A canine tooth from Vale Furado is classified as Paralophiodon cf. leptorhynchum. The genus Paralophiodon indicates an age from Lower Lutetian to Auversian, Middle Eocene. As it belongs in the lineage of P. leptorhynchum, possible age span is furth~L~uced from Middle Lutetian to Auversian. This conclusion remains valid or nearly so even in the less probable case of confusion with some form included in P. isselensis lineage. Our previous (1975) datation for sandstones and pelites from Vale Furado is thus confirmed, and more accurately recognized. Paralophiodon and the crocodilian Iberosuchus are a rather sound basis for correlation with stratigraphical units near Zamora and Salamanca in Spain.

Low-loss austempered ductile iron gears: experimental evaluation comparing materials and lubricants

An experimental study to evaluate the power dissipation of gears was performed. Three low-loss gear models were manufactured using standard 20° pressure angle tools. Austempered ductile iron (ADI) and 20MnCr5 carburized steel gears were tested in an FZG gear test machine using mineral, ester and polyalphaolephine (PAO)-based oils. The results compare power dissipation, the influence of different tooth flank geometries, materials and lubricants. This work concludes that conventional power-transmission gears can be replaced by these improved and more efficient low–loss models, which can be produced using common tools and that steel gears can be successfully replaced by austempered ductile iron gears.

Contextual and individual indicators associated with the presence of teeth in adults

OBJECTIVE The objective of this study was to analyze whether socioeconomic conditions and the period of availability of fluoridated water are associated with the number of teeth present.METHODSThis cross-sectional study analyzed data from 1,720 adults between 20 and 59 years of age who resided in Florianópolis, SC, Southern Brazil, in 2009. The outcome investigated was the self-reported number of teeth present. The individual independent variables included gender, age range, skin color, number of years of schooling, and per capita household income. The duration of residence was used as a control variable. The contextual exposures included the period of availability of fluoridated water to the households and the socioeconomic variable for the census tracts, which was created from factor analysis of the tract’s mean income, education level, and percentage of households with treated water. Multilevel logistic regression was performed and inter-level interactions were tested.RESULTS Residents in intermediate and poorer areas and those with fluoridated water available for less time exhibited the presence of fewer teeth compared with those in better socioeconomic conditions and who had fluoridated water available for a longer period (OR = 1.02; 95%CI 1.01;1.02). There was an association between the period of availability of fluoridated water, per capita household income and number of years of education. The proportion of individuals in the poorer and less-educated stratum, which had fewer teeth present, was higher in regions where fluoridated water had been available for less time.CONCLUSIONS Poor socioeconomic conditions and a shorter period of availability of fluoridated water were associated with the probability of having fewer teeth in adulthood. Public policies aimed at reducing socioeconomic inequalities and increasing access to health services such as fluoridation of the water supply may help to reduce tooth loss in the future.

Low torque loss gears: austempered ductile iron versus carburized steel

Low-loss power transmission gears operate at lower temperature than conventional ones because their teeth geometry is optimized to reduce friction. The main objective of this work is to compare the operating stabilization temperature and efficiency of low-loss austempered ductile iron (ADI) and carburized steel gears. Three different low-loss tooth geometries were adopted (types 311, 411 and 611, all produced using standard 20° pressure angle tools) and corresponding steel and ADI gears were tested in a FZG machine. The results obtained showed that low-loss geometries had a significant influence on power loss, gears 611 generating lower power loss than gears 311. At low speeds (500 and 1000 rpm) and high torque ADI gears generated lower power loss than steel gears. However, at high speed and high torque (high input power and high stabilization temperature) steel gears had better efficiency.

Color and Luminescence stability of selected dental materials in vitro

To study luminescence, reflectance, and color stability of dental composites and ceramics. Materials and Methods: IPS e.max, IPS Classic, Gradia, and Sinfony materials were tested, both unpolished (as-cast) and polished specimens. Coffee, tea, red wine, and distilled water (control) were used as staining drinks. Disk-shaped specimens were soaked in the staining drinks for up to 5 days. Color was measured by a colorimeter. Fluorescence was recorded using a spectrofluorometer, in the front-face geometry. Time-resolved fluorescence spectra were recorded using a laser nanosecond spectrofluorometer. Results: The exposure of the examined dental materials to staining drinks caused changes in color of the composites and ceramics, with the polished specimens exhibiting significantly lower color changes as compared to unpolished specimens. Composites exhibited lower color stability as compared to ceramic materials. Water also caused perceptible color changes in most materials. The materials tested demonstrated significantly different initial luminescence intensities. Upon exposure to staining drinks, luminescence became weaker by up to 40%, dependent on the drink and the material. Time-resolved luminescence spectra exhibited some red shift of the emission band at longer times, with the lifetimes in the range of tens of nanoseconds. Conclusions: Unpolished specimens with a more developed surface have lower color stability. Specimens stored in water develop some changes in their visual appearance. The presently proposed methods are effective in evaluating the luminescence of dental materials. Luminescence needs to be tested in addition to color, as the two characteristics are uncorrelated. It is important to further improve the color and luminescence stability of dental materials.

The bovid from the Carriça clay-pit (Côja): a discussion

A Bovid tooth referred to in the litterature as from the same locality that yielded upper Eocene mammals belongs to a modem or probably contemporary Bos taurus (domestic cattle); it is not a fossil and certainly was not found in situ. As it may induce in confusion, it must not anymore be taken into account in future paleontological and stratigraphic work.

Periodontal aspects of the juvenile form of paracoccidioidomycosis

Three cases of the juvenile form of paracoccidioidomycosis are reported. Emphasis has been given to the oral manifestations, particularly the periodontal involvement. The main periodontal findings were: generalized and progressive alveolar bone destruction leading to gingival recession with exposure of the tooth roots, and spontaneous tooth losses. The gingival mucosa was predominantly smooth, erithematous and slightly swollen. These aspects, although rare, may be the earliest signs of the disease and sometimes its only manifestation.