CCR5-dependent regulatory T cell migration mediates fungal survival and severe immunosuppression

Paracoccidioidomycosis, a debilitating pulmonary mycosis, is caused by the dimorphic fungus Paracoccidioides brasiliensis. The infection results in the formation of granulomas containing viable yeast cells that are the fungal sources for disease reactivation. Because CD4(+)CD25(+) regulatory T cells (Tregs) are in the lesions of patients with paracoccidioidomycosis, the migration of Treg cells is dependent on the axis chemokine-chemokine receptors, and CCR5 ligands are produced in P. brasiliensis-induced lesions, we investigated the role of CCR5 in the control of the infection. The results showed that CCR5(-/-) mice are more efficient in controlling fungal growth and dissemination and exhibited smaller granulomas than wild-type (WT) mice. In the absence of CCR5, the percentage of CD4(+)CD25(+) T cells expressing Foxp3, glucocorticoid-induced TNFR (GITR), CD103, CD45(low), and CTLA-4 in the granulomas was significantly decreased. Interestingly, P. brasiliensis infection resulted in an absence of T cell proliferation in response to Con A in WT but not CCR5(-/-) mice that was abrogated by anti-CTLA-4 mAb and anti-GITR mAb. Moreover, the adoptive transfer of CD4(+)CD25(+) but not CD4(+)CD25(-) T cells from infected WT to infected CCR5(-/-) mice resulted in a significant increase in fungal load. Overall, CCR5 is a key receptor for the migration of Treg cells to the site of P. brasiliensis infections leading to down-modulation of effector immune response and the long-term presence of the fungus in the granulomas. Thus, a tight control of Treg cell migration to the granulomatous lesions could be an important mechanism for avoiding exacerbation and reactivation of the disease.

The Drop Technique: a Method to Control the Amount of Fluoride Dentifrice Used by Young Children

Purpose: The purpose of this study was to evaluate the amount of dentifrice applied to the toothbrush by school children using a liquid dentifrice (drop technique), when compared to toothpaste. Materials and Methods: A total of 178 school children (4-8 years old) from two cities in Brazil (Bauru and Bariri) participated in the present two-part crossover study. Children from Bauru received training regarding tooth-brushing techniques and use of dentifrice before data collection. In each phase, the amount of toothpaste or liquid dentifrice applied by the children to the toothbrush was measured, using a portable analytical balance (+/- 0.01 g). Data were tested by analysis of covariance (Ancova) and linear regression (p < 0.05). Results: The mean (+/- standard deviation) amounts of toothpaste and liquid dentifrice applied to the toothbrushes for children from Bauru were 0.41 +/- 0.20 g and 0.15 +/- 0.06 g, respectively. For children from Bariri, the amounts applied were and 0.48 +/- 0.24 g and 0.14 +/- 0.05 g, respectively. The amount of toothpaste applied was significantly larger than the amount of liquid dentifrice for both cities. Children from Bariri applied a significantly larger amount of toothpaste, when compared to those from Bauru. However, for the liquid dentifrice, there was no statistically significant difference between the cities. A significant correlation between the amount of toothpaste applied and the age of the children was verified, but the same was not found for the liquid dentifrice. Conclusion: The use of the drop technique reduced and standardised the amount of dentifrice applied to the toothbrush, which could reduce the risk of dental fluorosis for young children.

Dental caries in adolescents from public schools in Maputo, Mozambique

Aim: To assess dental caries prevalence in adolescents at urban and sub-urban areas of Maputo-City, Mozambique and to identify its relationship with dental fluorosis, dental plaque, nutritional status, frequency of sugar consumption and the concentration of fluoride in public water supply. Methods: Subjects (n=601) were randomly selected from five urban schools and five sub-urban schools. Clinical examinations were performed under standardised conditions by a trained examiner using DMFT index, SiC index, fluorosis index, PHP, BMI, a sugar consumption questionnaire and water supply analysis. The bivariate analysis and Pearson correlation was used (p<0.05). Results: The mean (DMFT) was 0.9 (+/- 1.65 SD). Children in urban schools showed less dental caries (0.8 +/- 1.49SD) than children in sub-urban schools (1.1 +/- 1.80SD, p=0.03). Only 8.15% had very mild to moderate fluorosis but most presented poor oral hygiene. Cases of malnutrition were found in more sub-urban schools (n = 109; 36.22%) than in urban schools (n = 66; 22.00%) (p=0.03). The frequency of sugar consumption was higher among urban children compared to suburban schools (p<0.00). The level of fluoride in water consumption in urban schools was 0.4 ppmF, above the level of fluoride in sub-urban schools, 0.2 ppmF. Conclusion: Dental caries should not be considered a major oral health problem in Maputo at the moment. However the data suggest the implementation of a population strategy to reduce dental caries rates, in children of both urban and sub-urban areas, in Maputo.

Preventive effect of iron gel with or without fluoride on bovine enamel erosion in vitro

Background: The aim of this study was to evaluate the preventive effect in vitro of experimental gel containing iron and/or fluoride on the erosion of bovine enamel. Methods: To standardize the blocks (n = 80), specimens (4 x 4 mm) were previously selected to measure the initial microhardness. The blocks were randomly allocated into four groups of 20 samples each: C (control, placebo gel); F (fluoride gel, 1.23% NaF); Fe (iron gel, 10 mmol/L FeSO(4)) and F + Fe (fluoride + iron gel). The gels were applied and removed after 1 minute. The blocks were then submitted to six alternating remineralization and demineralization cycles. The beverage Coca-Cola (R) (10 minutes, 30 mL) was used for demineralization, and artificial saliva (1 hour) for remineralization. The effect of erosion was measured by wear analysis (profilometry). Data were analysed by ANOVA and the Tukey test for individual comparisons (p <0.05). Results: The mean wear (+/- SD, mu m) was C: 0.94 +/- 0.22; F: 0.55 +/- 0.12; Fe: 0.49 +/- 0.11 and F + Fe: 0.55 +/- 0.13. When the experimental gels were used, there was statistically significant reduction in enamel wear in comparison with the control (p <0.001). However, the experimental gels did not differ significantly among them. Conclusions: The gels containing iron with or without fluoride are capable of interfering with the dissolution dental enamel in the presence of erosive challenge.

Tooth-wear patterns in adolescents with normal occlusion and Class II Division 2 malocclusion

Introduction: In this study, we investigated tooth-wear patterns in adolescents with either normal occlusion or Class II Division 2 malocclusion. Methods: The sample consisted of dental casts from 165 subjects that were divided into 2 groups: 115 normal occlusion subjects (mean age, 14.3 years) and 50 complete Class II Division 2 subjects (mean age, 13.9 years). Dental wear was assessed by using a modified version of the tooth wear index. The 2 groups were compared with the Mann-Whitney test for the frequency and severity of wear on each surface of each group of teeth. The level of statistical significance was set at 5%. Results: The normal occlusion group statistically had greater tooth wear on the incisal surfaces of the maxillary lateral incisors and the incisal surfaces of the maxillary canines than did the Class II Division 2 malocclusion group. The malocclusion group showed statistically greater tooth wear on the labial surfaces of the mandibular lateral incisors, the occlusal surfaces of the maxillary premolars and first molars, the occlusal surfaces of the mandibular premolars, the palatal surfaces of the maxillary second premolars, and the buccal surfaces of the mandibular premolars and first molars than did the normal occlusion group. Conclusions: Subjects with normal occlusion and those with complete Class II Division 2 malocclusions have different tooth-wear patterns. Tooth wear on the malocclusion subjects should not be considered pathologic but, rather, the consequence of different interocclusal arrangements. (Am J Orthod Dentofacial Orthop 2010;137:730.e1-730.e5)

Tooth-wear patterns in subjects with Class II Division 1 malocclusion and normal occlusion

Introduction: The aim of this study was to investigate the prevalence of tooth wear in adolescents with Class II malocclusion, compared with those with normal occlusion. Methods: The sample consisted of dental casts obtained from 310 subjects, divided into 3 groups: group 1, 110 subjects with normal occlusion (mean age, 13.51 years); group 2, 100 complete Class II Division 1 patients (mean age, 13.44 years); and group 3, 100 half-cusp Class II Division 1 patients (mean age, 13.17 years). Dental wear was assessed by using a modified version of the tooth-wear index. The 3 groups were compared by means of the Kruskal-Wallis and Dunn tests, considering the frequency and the severity of wear on each surface of each group of teeth. The level of statistical significance was set at 5%. Results: The normal occlusion group had statistically greater tooth wear on the palatal surfaces of the maxillary central incisors and the incisal surfaces of the maxillary canines than the corresponding surfaces in both Class II malocclusion groups. The complete and half-cusp Class II Division 1 malocclusion groups had statistically greater tooth wear on the occlusal surfaces of the maxillary second premolar and first molar, the occlusal surfaces of the mandibular premolars, and the buccal surfaces of the mandibular posterior teeth compared with the normal occlusion group. The half-cusp Class II Division 1 malocclusion group had significantly greater tooth wear on the incisal surfaces of the mandibular incisors compared with the complete Class II Division 1 malocclusion group. Conclusions: Subjects with normal occlusion and complete or half-cusp Class II Division 1 malocclusions have different tooth-wear patterns. Tooth wear on the malocclusion subjects should not be considered pathologic but rather consequent to the different interocclusal tooth arrangement. (Am J Orthod Dentofacial Orthop 2010; 137: 14. e1-14.e7)

Preventive effect of an iron varnish on bovine enamel erosion in vitro

Objective: The aim of this study was to evaluate, in vitro, the effect of an experimental varnish containing iron on the dissolution of bovine enamel by carbonated beverage. Methods: Eighty specimens were randomly allocated to four groups (n = 20 per group), according to the following treatments: Fe varnish (FeV, 10 mmoL/L Fe), F varnish (FV, 2.71% F), placebo varnish (PV) and control (not treated, NT). The varnishes were applied in a thin layer and removed after 6 h. Then, the samples were submitted to six cycles, alternating re- and demineralisation (only 1 day). Demineralisation was performed with the beverage Coca-Cola (R) (10 min, 30 mL/block) and remineralisation with artificial saliva for I h. In order to determine the amount of enamel dissolved, the wear was analysed by profilometry. Data were analysed by ANOVA and Tukey`s test (p < 0.05). Results: The mean wear (+/- S.E.) was significantly lesser for the FeV (0.451 +/- 0.018 mu m) when compared to the other treatments. The FV caused significantly less wear (0.554 +/- 0.022 mu m) when compared to PV (0.991 +/- 0.039 mu m) and NT (1.014 +/- 0.033), which did not significantly differ from each other. Conclusions: The results suggest that the iron varnish can interfere with the dissolution of dental enamel in the presence of acidic beverages. (C) 2008 Elsevier Ltd. All rights reserved.

Evaluation of the buccal vestibule-palatal diffusion of 4% articaine hydrochloride in impacted maxillary third molar extractions

Aims: The aim of this study was to evaluate the vestibular-palatal diffusion of 4% articaine with epinephrine 1: 100,000 and 1: 200,000, in impacted maxillary third molar extractions, without palatal injection. Materials and Method: Two hundred teeth were selected from patients age 15 to 46. Patients were divided into 4 groups: 1A, were anesthetized with 4% articaine 1: 100,000 and the surgery was initiated 5 minutes following anesthesia. 1B, used 4% articaine 1: 100,000 but the surgery was started 10 minutes after anesthesia. 2A, used 4% articaine 1: 200,000 the surgery was started 5 minutes after. 2B, used 4% articaine 1: 200,000 but 10 minutes was allowed for anesthetic diffusion before the initiation of in groups (50 extractions each) only buccal vestibule anesthesia was initially administered (i.e. no palatal injections were used). Results: The rate of sufficient vestibule-palatal diffusion, as determined by the lack of necessity of supplemental palatal anesthesia, was: 1A(84%), 1B(98%), 2A(78%), 2B(82%). Chi-square (X2) and residual analyses showed that a higher vestibule-palatal diffusion was obtained using 4% articaine 1: 100,000 with a period of 10 minutes (p<0.05). Conclusions: Most of the extractions could be performed only with vestibule anesthesia. However, vasoconstrictor concentration and the time interval between administration of the anesthetic and initiation of surgery did influence buccal vestibule-palatal diffusion of 4% articaine in the extraction models used.

Pest risk assessment of insects in sea cargo containers

A survey of the floors of 3001 empty sea cargo containers in storage was undertaken to estimate the quarantine risk of importing exotic insect pests into Australia, with special reference to pests of timber. More than 7400 live and dead insects were collected from 1174 containers. No live infestations of timber-feeding insects were recorded, but feeding damage detected in one floor indicates a low risk of importing colonies of timber pests in containers. The survey collection of dead insects demonstrates that containers are regularly exposed to economically important quarantinable insects, including timber pests (bostrichids, curculionids, cerambycids, siricids and termites), agricultural pests (including Adoretus sinicus, Adoretus sp., Carpophilus obsoletus and Philaenus spumarius), and nuisance pests (vespids and Solenopsis sp.). Stored product pests were found in more than 10% of containers. The assessment of pest risk associated with shipping containers is discussed in terms of the quantity and quality of opportunities for exotic insects to establish via this pathway.

Valuing ecological functions of biodiversity in changbaishan mountain biosphere reserve in northeast china

Conservation of biodiversity can generate considerable indirect economic value and this is being increasingly recognized in China. For a forest ecosystem type of a nature reserve, the most important of its values are its ecological functions which provide human beings and other living things with beneficial environmental services. These services include water conservancy, soil protection, CO2 fixation and O-2 release, nutrient cycling, pollutant decomposition, and disease and pest control. Based on a case study in Changbaishan Mountain Biosphere Reserve in Northeast China, this paper provides a monetary valuation of these services by using opportunity cost and alternative cost methods. Using such an approach, this reserve is valued at 510.11 million yuan (USD 61.68 mill.) per year, 10 times higher than the opportunity cost (51.78 mill. yuan/ha.a) for regular timber production. While China has heeded United Nations Environmental Program (UNEP)'s call for economic evaluation of ecological functions, the assessment techniques used need to be improved in China and in the West for reasons mentioned.

Isolation of microsatellite loci from spotted gum (Corymbia variegata), and cross-species amplification in Corymbia and Eucalyptus

Corymbia variegata (spotted gum) is an important commercial hardwood timber species in Australia. Fourteen polymorphic microsatellite loci were isolated from C. variegata, with 3-5 alleles amplified in three individuals examined. Cross-species amplification in Corymbia was successful for all primer pairs, while 10 loci (71%) were successfully transferred to at least one species in the closely related genus Eucalyptus.

Comparative influence of forest management and habitat structural factors on the abundances of hollow-nesting bird species in subtropical Australian eucalypt forest

We examined the impact of single-tree selective logging and fuel reduction bums on the abundance of hollow-nesting bird species at a regional scale in southeastern Queensland, Australia. Data were collected on species abundance and habitat structure of dry sclerophyll production forest at 36 sites with known logging and fire histories. Sixteen bird species were recorded with most being resident, territorial, obligate hollow nesters that used hollows that were either small (18 cm diameter). Species densities were typically low, but combinations of two forest management and three habitat structural variables influenced the abundances of eight bird species in different and sometimes conflicting ways. The results suggest that habitat tree management for biodiversity in production forests cannot depend upon habitat structural characteristics alone. Management histories appear to have independent influence (on some bird species) that are distinguishable from their impacts on habitat structure per se. Rather than managing to maximize species abundances to maintain biodiversity, we may be better off managing to avoid extinctions of populations by identifying thresholds of acceptable fluctuations in populations of not only hollow-nesting birds but other forest dependent wildlife relative to scientifically valid forest management and habitat structural surrogates.

Habitat requirements for the conservation of arboreal marsupials in dry sclerophyll forests of Southeast Queensland, Australia

The habitat requirements of arboreal marsupials were investigated in the dry sclerophyll forests of southeast Queensland, Australia. Species richness and abundance of arboreal marsupials was correlated to the proportion of total stand basal area occupied by lemon-scented gum (Corymbia citriodora), the height of the tallest trees, and density of hollow-bearing trees. The first two factors suggested that the most productive forests were also the most suitable habitats for arboreal marsupials. Importantly, the number of hollow-bearing trees was a significant factor in determining species richness and abundance of arboreal marsupials in this study, with the maximum number of species reached at sites containing greater than or equal to4 hollow-bearing trees/ha, and maximum abundance occurring at sites with :6 hollow-bearingtrees/ha. The proportion of C. citriodora was significant for the presence of the common brushtail possum (Trichosurus vulpecula), greater glider (Petauroides volans), and the yellow-bellied glider (Petaurus australis), while understory Acacia sp. density was important for the presence of the sugar glider (Petaurus breviceps). The yellow-bellied glider was also affected by two other variables: the density of hollow-bearing trees >50 cm diameter at breast height (dbh), and the time since the last logging. Current Codes of Practice regulating the density of hollow-bearing trees and silvicultural practices in state-owned timber production forests appear to provide adequate protection for arboreal marsupials, but the recently introduced increase in timber extraction rates within state forests may be detrimental to the animals. Also, protective prescriptions do not apply to the privately owned and leasehold estates, which contain the majority of the dry sclerophyll forests in southeast Queensland.

Viruses associated with outbreaks of equine respiratory disease in New Zealand

AIM: To identify viruses associated with respiratory disease in young horses in New Zealand. METHODS: Nasal swabs and blood samples were collected from 45 foals or horses from five separate outbreaks of respiratory disease that occurred in New Zealand in 1996, and from 37 yearlings at the time of the annual yearling sales in January that same year. Virus isolation from nasal swabs and peripheral blood leukocytes (PBL) was undertaken and serum samples were tested for antibodies against equine herpesviruses (EHV-1, EHV-2, EHV-4 and EHV-5), equine rhinitis-A virus (ERAV), equine rhinitis-B virus (ERBV), equine adenovirus 1 (EAdV-1), equine arteritis virus (EAV), reovirus 3 and parainfluenza virus type 3 (PIV3). RESULTS: Viruses were isolated from 24/94 (26%) nasal swab samples and from 77/80 (96%) PBL samples collected from both healthy horses and horses showing clinical signs of respiratory disease. All isolates were identified as EHV-2, EHV-4, EHV-5 or untyped EHV Of the horses and foals tested, 59/82 (72%) were positive for EHV-1 and/or EHV-4 serum neutralising (SN) antibody on at least one sampling occasion, 52/82 (63%) for EHV-1-specific antibody tested by enzyme-linked immunosorbent assay (ELISA), 10/80 (13%) for ERAV SN antibody, 60/80 (75%) for ERBV SN antibody, and 42/80 (53%) for haemagglutination inhibition (HI) antibody to EAdV-1. None of the 64 serum samples tested were positive for antibodies to EAV, reovirus 3 or PIV3. Evidence of infection with all viruses tested was detected in both healthy horses and in horses showing clinical signs of respiratory disease. Recent EHV 2 infection was associated with the development of signs of respiratory disease among yearlings [relative risk (RR) = 2.67, 95% CI = 1.59-4.47, p = 0.0171]. CONCLUSIONS: Of the equine respiratory viruses detected in horses in New Zealand during this study, EHV 2 was most likely to be associated with respiratory disease. However, factors other than viral infection are probably important in the development of clinical signs of disease.

P/M in Australia

Powder metallurgy activities in Australia are reviewed. Though relatively small, the industry is diverse and is experiencing record sales, buoyed by a strong domestic economy. In particular, the industry is underpinned by a vibrant automotive sector and a dominant mining and minerals industry. Research on powder metallurgy and particulate materials is conducted primarily in the universities with emphasis on mechanical alloying and aluminium alloys. Overall, the future outlook for powder metallurgy in Australia is excellent.